diff --git a/Marlin/src/lcd/extui/dgus/DGUSScreenHandler.cpp b/Marlin/src/lcd/extui/dgus/DGUSScreenHandler.cpp
index a1de499f46..2e8df757eb 100644
--- a/Marlin/src/lcd/extui/dgus/DGUSScreenHandler.cpp
+++ b/Marlin/src/lcd/extui/dgus/DGUSScreenHandler.cpp
@@ -180,7 +180,7 @@ void DGUSScreenHandler::DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable &var) {
     float valuesend = 0;
     switch (var.VP) {
       default: return;
-      #if HOTENDS >= 1
+      #if HAS_HOTEND
         case VP_E0_PID_P: valuesend = value; break;
         case VP_E0_PID_I: valuesend = unscalePID_i(value); break;
         case VP_E0_PID_D: valuesend = unscalePID_d(value); break;
@@ -393,7 +393,7 @@ void DGUSScreenHandler::HandleTemperatureChanged(DGUS_VP_Variable &var, void *va
 
   switch (var.VP) {
     default: return;
-    #if HOTENDS >= 1
+    #if HAS_HOTEND
       case VP_T_E0_Set:
         NOMORE(newvalue, HEATER_0_MAXTEMP);
         thermalManager.setTargetHotend(newvalue, 0);
@@ -427,10 +427,8 @@ void DGUSScreenHandler::HandleFlowRateChanged(DGUS_VP_Variable &var, void *val_p
     uint8_t target_extruder;
     switch (var.VP) {
       default: return;
-      #if HOTENDS >= 1
-        case VP_Flowrate_E0: target_extruder = 0; break;
-      #endif
-      #if HOTENDS >= 2
+      case VP_Flowrate_E0: target_extruder = 0; break;
+      #if HAS_MULTI_EXTRUDER
         case VP_Flowrate_E1: target_extruder = 1; break;
       #endif
     }
@@ -450,11 +448,11 @@ void DGUSScreenHandler::HandleManualExtrude(DGUS_VP_Variable &var, void *val_ptr
   ExtUI::extruder_t target_extruder;
 
   switch (var.VP) {
-    #if HOTENDS >= 1
+    #if HAS_HOTEND
       case VP_MOVE_E0: target_extruder = ExtUI::extruder_t::E0; break;
-    #endif
-    #if HOTENDS >= 2
-      case VP_MOVE_E1: target_extruder = ExtUI::extruder_t::E1; break;
+      #if HAS_MULTI_EXTRUDER
+        case VP_MOVE_E1: target_extruder = ExtUI::extruder_t::E1; break;
+      #endif
     #endif
     default: return;
   }
@@ -526,11 +524,11 @@ void DGUSScreenHandler::HandleStepPerMMExtruderChanged(DGUS_VP_Variable &var, vo
   ExtUI::extruder_t extruder;
   switch (var.VP) {
     default: return;
-      #if HOTENDS >= 1
+      #if HAS_EXTRUDERS
         case VP_E0_STEP_PER_MM: extruder = ExtUI::extruder_t::E0; break;
-      #endif
-      #if HOTENDS >= 2
-        case VP_E1_STEP_PER_MM: extruder = ExtUI::extruder_t::E1; break;
+        #if HAS_MULTI_EXTRUDER
+          case VP_E1_STEP_PER_MM: extruder = ExtUI::extruder_t::E1; break;
+        #endif
       #endif
   }
   DEBUG_ECHOLNPAIR_F("value:", value);
@@ -548,7 +546,7 @@ void DGUSScreenHandler::HandleStepPerMMExtruderChanged(DGUS_VP_Variable &var, vo
     switch (var.VP) {
       default: break;
         #if ENABLED(PIDTEMP)
-          #if HOTENDS >= 1
+          #if HAS_HOTEND
             case VP_PID_AUTOTUNE_E0: // Autotune Extruder 0
               sprintf_P(buf, PSTR("M303 E%d C5 S210 U1"), ExtUI::extruder_t::E0);
               break;
@@ -598,17 +596,17 @@ void DGUSScreenHandler::HandleHeaterControl(DGUS_VP_Variable &var, void *val_ptr
 
   uint8_t preheat_temp = 0;
   switch (var.VP) {
-    #if HOTENDS >= 1
+    #if HAS_HOTEND
       case VP_E0_CONTROL:
+      #if HOTENDS >= 2
+        case VP_E1_CONTROL:
+        #if HOTENDS >= 3
+          case VP_E2_CONTROL:
+        #endif
+      #endif
+      preheat_temp = PREHEAT_1_TEMP_HOTEND;
+      break;
     #endif
-    #if HOTENDS >= 2
-      case VP_E1_CONTROL:
-    #endif
-    #if HOTENDS >= 3
-      case VP_E2_CONTROL:
-    #endif
-    preheat_temp = PREHEAT_1_TEMP_HOTEND;
-    break;
 
     case VP_BED_CONTROL:
       preheat_temp = PREHEAT_1_TEMP_BED;
@@ -660,7 +658,7 @@ void DGUSScreenHandler::HandleHeaterControl(DGUS_VP_Variable &var, void *val_ptr
 
     switch (var.VP) {
       default: return;
-        #if HOTENDS >= 1
+        #if HAS_HOTEND
           case VP_E0_BED_PREHEAT:
             thermalManager.setTargetHotend(e_temp, 0);
             TERN_(HAS_HEATED_BED, thermalManager.setTargetBed(bed_temp));
diff --git a/Marlin/src/lcd/extui/dgus/DGUSScreenHandler.h b/Marlin/src/lcd/extui/dgus/DGUSScreenHandler.h
index 9aeb5b73b1..8ee2761c89 100644
--- a/Marlin/src/lcd/extui/dgus/DGUSScreenHandler.h
+++ b/Marlin/src/lcd/extui/dgus/DGUSScreenHandler.h
@@ -56,3 +56,21 @@ inline uint16_t swap16(const uint16_t value) { return (value & 0xFFU) << 8U | (v
 #endif
 
 extern DGUSScreenHandler ScreenHandler;
+
+// Helper to define a DGUS_VP_Variable for common use-cases.
+#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR) { \
+  .VP = VPADR, \
+  .memadr = VPADRVAR, \
+  .size = sizeof(VPADRVAR), \
+  .set_by_display_handler = RXFPTR, \
+  .send_to_display_handler = TXFPTR \
+}
+
+// Helper to define a DGUS_VP_Variable when the size of the var cannot be determined automatically (e.g., a string)
+#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR) { \
+  .VP = VPADR, \
+  .memadr = VPADRVAR, \
+  .size = STRLEN, \
+  .set_by_display_handler = RXFPTR, \
+  .send_to_display_handler = TXFPTR \
+}
diff --git a/Marlin/src/lcd/extui/dgus/fysetc/DGUSDisplayDef.cpp b/Marlin/src/lcd/extui/dgus/fysetc/DGUSDisplayDef.cpp
index 5e164d289e..4ca7db7f40 100644
--- a/Marlin/src/lcd/extui/dgus/fysetc/DGUSDisplayDef.cpp
+++ b/Marlin/src/lcd/extui/dgus/fysetc/DGUSDisplayDef.cpp
@@ -41,14 +41,11 @@
   uint16_t distanceToMove = 10;
 #endif
 
-const uint16_t VPList_Boot[] PROGMEM = {
-  VP_MARLIN_VERSION,
-  0x0000
-};
+const uint16_t VPList_Boot[] PROGMEM = { VP_MARLIN_VERSION, 0x0000 };
 
 const uint16_t VPList_Main[] PROGMEM = {
-  /* VP_M117, for completeness, but it cannot be auto-uploaded. */
-  #if HOTENDS >= 1
+  // VP_M117, for completeness, but it cannot be auto-uploaded.
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set, VP_E0_STATUS,
   #endif
   #if HOTENDS >= 2
@@ -70,7 +67,7 @@ const uint16_t VPList_Main[] PROGMEM = {
 };
 
 const uint16_t VPList_Temp[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set,
   #endif
   #if HOTENDS >= 2
@@ -83,8 +80,8 @@ const uint16_t VPList_Temp[] PROGMEM = {
 };
 
 const uint16_t VPList_Status[] PROGMEM = {
-  /* VP_M117, for completeness, but it cannot be auto-uploaded */
-  #if HOTENDS >= 1
+  // VP_M117, for completeness, but it cannot be auto-uploaded
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set,
   #endif
   #if HOTENDS >= 2
@@ -105,11 +102,11 @@ const uint16_t VPList_Status[] PROGMEM = {
 
 const uint16_t VPList_Status2[] PROGMEM = {
   /* VP_M117, for completeness, but it cannot be auto-uploaded */
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_Flowrate_E0,
-  #endif
-  #if HOTENDS >= 2
-    VP_Flowrate_E1,
+    #if HAS_MULTI_EXTRUDER
+      VP_Flowrate_E1,
+    #endif
   #endif
   VP_PrintProgress_Percentage,
   VP_PrintTime,
@@ -117,7 +114,7 @@ const uint16_t VPList_Status2[] PROGMEM = {
 };
 
 const uint16_t VPList_Preheat[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set,
   #endif
   #if HOTENDS >= 2
@@ -135,11 +132,11 @@ const uint16_t VPList_ManualMove[] PROGMEM = {
 };
 
 const uint16_t VPList_ManualExtrude[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HAS_MULTI_EXTRUDER
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
   #endif
   VP_EPos,
   0x0000
@@ -156,23 +153,23 @@ const uint16_t VPList_SD_FlowRates[] PROGMEM = {
 };
 
 const uint16_t VPList_Filament_heating[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set,
     VP_E0_FILAMENT_LOAD_UNLOAD,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
-    VP_E1_FILAMENT_LOAD_UNLOAD,
+    #if HAS_MULTI_EXTRUDER
+      VP_T_E1_Is, VP_T_E1_Set,
+      VP_E1_FILAMENT_LOAD_UNLOAD,
+    #endif
   #endif
   0x0000
 };
 
 const uint16_t VPList_Filament_load_unload[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_E0_FILAMENT_LOAD_UNLOAD,
-  #endif
-  #if HOTENDS >= 2
-    VP_E1_FILAMENT_LOAD_UNLOAD,
+    #if HAS_MULTI_EXTRUDER
+      VP_E1_FILAMENT_LOAD_UNLOAD,
+    #endif
   #endif
   0x0000
 };
@@ -184,7 +181,7 @@ const uint16_t VPList_SDFileList[] PROGMEM = {
 
 const uint16_t VPList_SD_PrintManipulation[] PROGMEM = {
   VP_PrintProgress_Percentage, VP_PrintTime,
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set,
   #endif
   #if HOTENDS >= 2
@@ -204,11 +201,11 @@ const uint16_t VPList_SD_PrintManipulation[] PROGMEM = {
 };
 
 const uint16_t VPList_SDPrintTune[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set, VP_Flowrate_E0,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set, VP_Flowrate_E1,
+    #if HAS_MULTI_EXTRUDER
+      VP_T_E1_Is, VP_T_E1_Set, VP_Flowrate_E1,  // ERROR: Flowrate is per-extruder, not per-hotend
+    #endif
   #endif
   #if HAS_HEATED_BED
     VP_T_Bed_Is, VP_T_Bed_Set,
@@ -222,11 +219,11 @@ const uint16_t VPList_StepPerMM[] PROGMEM = {
   VP_X_STEP_PER_MM,
   VP_Y_STEP_PER_MM,
   VP_Z_STEP_PER_MM,
-  #if HOTENDS >= 1
+  #if HAS_EXTRUDERS
     VP_E0_STEP_PER_MM,
-  #endif
-  #if HOTENDS >= 2
-    VP_E1_STEP_PER_MM,
+    #if HAS_MULTI_EXTRUDER
+      VP_E1_STEP_PER_MM,
+    #endif
   #endif
   0x0000
 };
@@ -265,7 +262,7 @@ const uint16_t VPList_PIDTuningWaiting[] PROGMEM = {
 };
 
 const uint16_t VPList_FLCPreheat[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set,
   #endif
   #if HAS_HEATED_BED
@@ -275,14 +272,14 @@ const uint16_t VPList_FLCPreheat[] PROGMEM = {
 };
 
 const uint16_t VPList_FLCPrinting[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_SD_Print_ProbeOffsetZ,
   #endif
   0x0000
 };
 
 const uint16_t VPList_Z_Offset[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_SD_Print_ProbeOffsetZ,
   #endif
   0x0000
@@ -316,14 +313,6 @@ const struct VPMapping VPMap[] PROGMEM = {
 
 const char MarlinVersion[] PROGMEM = SHORT_BUILD_VERSION;
 
-// Helper to define a DGUS_VP_Variable for common use cases.
-#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=sizeof(VPADRVAR), \
-  .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
-
-// Helper to define a DGUS_VP_Variable when the sizeo of the var cannot be determined automaticalyl (eg. a string)
-#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=STRLEN, \
-  .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
-
 const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   // Helper to detect touch events
   VPHELPER(VP_SCREENCHANGE, nullptr, ScreenHandler.ScreenChangeHook, nullptr),
@@ -333,96 +322,96 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   #endif
   VPHELPER(VP_CONFIRMED, nullptr, ScreenHandler.ScreenConfirmedOK, nullptr),
 
-  VPHELPER(VP_TEMP_ALL_OFF, nullptr, &ScreenHandler.HandleAllHeatersOff, nullptr),
+  VPHELPER(VP_TEMP_ALL_OFF, nullptr, ScreenHandler.HandleAllHeatersOff, nullptr),
   #if ENABLED(DGUS_UI_MOVE_DIS_OPTION)
-    VPHELPER(VP_MOVE_OPTION, &distanceToMove, &ScreenHandler.HandleManualMoveOption, nullptr),
+    VPHELPER(VP_MOVE_OPTION, &distanceToMove, ScreenHandler.HandleManualMoveOption, nullptr),
   #endif
   #if ENABLED(DGUS_UI_MOVE_DIS_OPTION)
-    VPHELPER(VP_MOVE_X, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_MOVE_Y, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_MOVE_Z, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_HOME_ALL, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_X, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_Y, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_Z, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_HOME_ALL, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
   #else
-    VPHELPER(VP_MOVE_X, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_MOVE_Y, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_MOVE_Z, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_HOME_ALL, nullptr, &ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_X, nullptr, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_Y, nullptr, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_Z, nullptr, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_HOME_ALL, nullptr, ScreenHandler.HandleManualMove, nullptr),
   #endif
-  VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, &ScreenHandler.HandleMotorLockUnlock, nullptr),
+  VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, ScreenHandler.HandleMotorLockUnlock, nullptr),
   #if ENABLED(POWER_LOSS_RECOVERY)
-    VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, &ScreenHandler.HandlePowerLossRecovery, nullptr),
+    VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, ScreenHandler.HandlePowerLossRecovery, nullptr),
   #endif
-  VPHELPER(VP_SETTINGS, nullptr, &ScreenHandler.HandleSettings, nullptr),
+  VPHELPER(VP_SETTINGS, nullptr, ScreenHandler.HandleSettings, nullptr),
   #if ENABLED(SINGLE_Z_CALIBRATION)
-    VPHELPER(VP_Z_CALIBRATE, nullptr, &ScreenHandler.HandleZCalibration, nullptr),
+    VPHELPER(VP_Z_CALIBRATE, nullptr, ScreenHandler.HandleZCalibration, nullptr),
   #endif
 
   #if ENABLED(FIRST_LAYER_CAL)
-    VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, &ScreenHandler.HandleFirstLayerCal, nullptr),
+    VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, ScreenHandler.HandleFirstLayerCal, nullptr),
   #endif
 
-  { .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
   // M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr
-  { .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&ScreenHandler.DGUSLCD_SendStringToDisplay },
+  { .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplay },
 
   // Temperature Data
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_EPos, &destination.e, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
-    VPHELPER(VP_MOVE_E0, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
-    VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &ScreenHandler.HandleHeaterControl, nullptr),
-    VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
+    VPHELPER(VP_MOVE_E0, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
+    VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleHeaterControl, nullptr),
+    VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
     #if ENABLED(DGUS_PREHEAT_UI)
-      VPHELPER(VP_E0_BED_PREHEAT, nullptr, &ScreenHandler.HandlePreheat, nullptr),
+      VPHELPER(VP_E0_BED_PREHEAT, nullptr, ScreenHandler.HandlePreheat, nullptr),
     #endif
     #if ENABLED(PIDTEMP)
       VPHELPER(VP_E0_PID_P, &thermalManager.temp_hotend[0].pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
       VPHELPER(VP_E0_PID_I, &thermalManager.temp_hotend[0].pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
       VPHELPER(VP_E0_PID_D, &thermalManager.temp_hotend[0].pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
-      VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
+      VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
     #endif
     #if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
-      VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, &ScreenHandler.HandleFilamentOption, &ScreenHandler.HandleFilamentLoadUnload),
+      VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, ScreenHandler.HandleFilamentOption, ScreenHandler.HandleFilamentLoadUnload),
     #endif
   #endif
   #if HOTENDS >= 2
     VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_Flowrate_E1, &planner.flow_percentage[ExtUI::extruder_t::E1], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_MOVE_E1, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
-    VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, &ScreenHandler.HandleHeaterControl, nullptr),
-    VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
+    VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_Flowrate_E1, &planner.flow_percentage[ExtUI::extruder_t::E1], ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),  // ERROR: Flow is per-extruder, not per-hotend
+    VPHELPER(VP_MOVE_E1, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
+    VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleHeaterControl, nullptr),
+    VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
     #if ENABLED(PIDTEMP)
-      VPHELPER(VP_PID_AUTOTUNE_E1, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
+      VPHELPER(VP_PID_AUTOTUNE_E1, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
     #endif
-    VPHELPER(VP_E1_FILAMENT_LOAD_UNLOAD, nullptr, &ScreenHandler.HandleFilamentOption, &ScreenHandler.HandleFilamentLoadUnload),
+    VPHELPER(VP_E1_FILAMENT_LOAD_UNLOAD, nullptr, ScreenHandler.HandleFilamentOption, ScreenHandler.HandleFilamentLoadUnload),
   #endif
   #if HAS_HEATED_BED
     VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &ScreenHandler.HandleHeaterControl, nullptr),
-    VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
+    VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, ScreenHandler.HandleHeaterControl, nullptr),
+    VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
     #if ENABLED(PIDTEMPBED)
       VPHELPER(VP_BED_PID_P, &thermalManager.temp_bed.pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
       VPHELPER(VP_BED_PID_I, &thermalManager.temp_bed.pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
       VPHELPER(VP_BED_PID_D, &thermalManager.temp_bed.pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
-      VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
+      VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
     #endif
   #endif
 
   // Fan Data
   #if HAS_FAN
     #define FAN_VPHELPER(N) \
-      VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_PercentageToUint8, &ScreenHandler.DGUSLCD_SendPercentageToDisplay), \
-      VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], &ScreenHandler.HandleFanControl, nullptr), \
-      VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, &ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
+      VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_PercentageToUint8, ScreenHandler.DGUSLCD_SendPercentageToDisplay), \
+      VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], ScreenHandler.HandleFanControl, nullptr), \
+      VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
     REPEAT(FAN_COUNT, FAN_VPHELPER)
   #endif
 
   // Feedrate
-  VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, &ScreenHandler.DGUSLCD_SendWordValueToDisplay ),
+  VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
 
   // Position Data
   VPHELPER(VP_XPos, &current_position.x, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
@@ -430,7 +419,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   VPHELPER(VP_ZPos, &current_position.z, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
 
   // Print Progress
-  VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay ),
+  VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay),
 
   // Print Time
   VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintTimeToDisplay),
@@ -442,11 +431,11 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   VPHELPER(VP_X_STEP_PER_MM, &planner.settings.axis_steps_per_mm[X_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
   VPHELPER(VP_Y_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Y_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
   VPHELPER(VP_Z_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Z_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
-  #if HOTENDS >= 1
+  #if HAS_EXTRUDERS
     VPHELPER(VP_E0_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(0)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
-  #endif
-  #if HOTENDS >= 2
-    VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
+    #if HAS_MULTI_EXTRUDER
+      VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
+    #endif
   #endif
 
   // SDCard File listing.
@@ -463,7 +452,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
     VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, ScreenHandler.DGUSLCD_SD_ReallyAbort, nullptr),
     VPHELPER(VP_SD_Print_Setting, nullptr, ScreenHandler.DGUSLCD_SD_PrintTune, nullptr),
     #if HAS_BED_PROBE
-      VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe.offset.z, ScreenHandler.HandleProbeOffsetZChanged, &ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
+      VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe.offset.z, ScreenHandler.HandleProbeOffsetZChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
       #if ENABLED(BABYSTEPPING)
         VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, ScreenHandler.HandleLiveAdjustZ, nullptr),
       #endif
@@ -475,10 +464,10 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   #endif
 
   // Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content.
-  { .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
-  { .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
-  { .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
-  { .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
 
   VPHELPER(0, 0, 0, 0)  // must be last entry.
 };
diff --git a/Marlin/src/lcd/extui/dgus/fysetc/DGUSScreenHandler.cpp b/Marlin/src/lcd/extui/dgus/fysetc/DGUSScreenHandler.cpp
index 8b97003f6f..78828e14c5 100644
--- a/Marlin/src/lcd/extui/dgus/fysetc/DGUSScreenHandler.cpp
+++ b/Marlin/src/lcd/extui/dgus/fysetc/DGUSScreenHandler.cpp
@@ -249,7 +249,7 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
 
     switch (var.VP) {
       default: return;
-        #if HOTENDS >= 1
+        #if HAS_HOTEND
           case VP_E0_PID_P: newvalue = value; break;
           case VP_E0_PID_I: newvalue = scalePID_i(value); break;
           case VP_E0_PID_D: newvalue = scalePID_d(value); break;
@@ -329,7 +329,7 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
     }
 
     if (filament_data.action == 0) { // Go back to utility screen
-      #if HOTENDS >= 1
+      #if HAS_HOTEND
         thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E0);
       #endif
       #if HOTENDS >= 2
@@ -340,13 +340,13 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
     else { // Go to the preheat screen to show the heating progress
       switch (var.VP) {
         default: return;
-          #if HOTENDS >= 1
+          #if HAS_HOTEND
             case VP_E0_FILAMENT_LOAD_UNLOAD:
               filament_data.extruder = ExtUI::extruder_t::E0;
               thermalManager.setTargetHotend(e_temp, filament_data.extruder);
               break;
           #endif
-          #if HOTENDS >= 2
+          #if HAS_MULTI_EXTRUDER
             case VP_E1_FILAMENT_LOAD_UNLOAD:
               filament_data.extruder = ExtUI::extruder_t::E1;
               thermalManager.setTargetHotend(e_temp, filament_data.extruder);
diff --git a/Marlin/src/lcd/extui/dgus/hiprecy/DGUSDisplayDef.cpp b/Marlin/src/lcd/extui/dgus/hiprecy/DGUSDisplayDef.cpp
index a9fa407dd3..536c2b09b8 100644
--- a/Marlin/src/lcd/extui/dgus/hiprecy/DGUSDisplayDef.cpp
+++ b/Marlin/src/lcd/extui/dgus/hiprecy/DGUSDisplayDef.cpp
@@ -48,11 +48,11 @@ const uint16_t VPList_Boot[] PROGMEM = {
 
 const uint16_t VPList_Main[] PROGMEM = {
   /* VP_M117, for completeness, but it cannot be auto-uploaded. */
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set, VP_E0_STATUS,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
   #endif
   #if HAS_HEATED_BED
     VP_T_Bed_Is, VP_T_Bed_Set, VP_BED_STATUS,
@@ -70,11 +70,11 @@ const uint16_t VPList_Main[] PROGMEM = {
 };
 
 const uint16_t VPList_Temp[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
   #endif
   #if HAS_HEATED_BED
     VP_T_Bed_Is, VP_T_Bed_Set,
@@ -84,11 +84,11 @@ const uint16_t VPList_Temp[] PROGMEM = {
 
 const uint16_t VPList_Status[] PROGMEM = {
   /* VP_M117, for completeness, but it cannot be auto-uploaded */
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
   #endif
   #if HAS_HEATED_BED
     VP_T_Bed_Is, VP_T_Bed_Set,
@@ -105,11 +105,11 @@ const uint16_t VPList_Status[] PROGMEM = {
 
 const uint16_t VPList_Status2[] PROGMEM = {
   /* VP_M117, for completeness, but it cannot be auto-uploaded */
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_Flowrate_E0,
-  #endif
-  #if HOTENDS >= 2
-    VP_Flowrate_E1,
+    #if HOTENDS >= 2
+      VP_Flowrate_E1,
+    #endif
   #endif
   VP_PrintProgress_Percentage,
   VP_PrintTime,
@@ -117,11 +117,11 @@ const uint16_t VPList_Status2[] PROGMEM = {
 };
 
 const uint16_t VPList_Preheat[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
   #endif
   #if HAS_HEATED_BED
     VP_T_Bed_Is, VP_T_Bed_Set,
@@ -135,11 +135,11 @@ const uint16_t VPList_ManualMove[] PROGMEM = {
 };
 
 const uint16_t VPList_ManualExtrude[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
   #endif
   VP_EPos,
   0x0000
@@ -156,22 +156,22 @@ const uint16_t VPList_SD_FlowRates[] PROGMEM = {
 };
 
 const uint16_t VPList_Filament_heating[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set,
     VP_E0_FILAMENT_LOAD_UNLOAD,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
   #endif
   0x0000
 };
 
 const uint16_t VPList_Filament_load_unload[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_E0_FILAMENT_LOAD_UNLOAD,
-  #endif
-  #if HOTENDS >= 2
-    VP_E1_FILAMENT_LOAD_UNLOAD,
+    #if HOTENDS >= 2
+      VP_E1_FILAMENT_LOAD_UNLOAD,
+    #endif
   #endif
   0x0000
 };
@@ -183,11 +183,11 @@ const uint16_t VPList_SDFileList[] PROGMEM = {
 
 const uint16_t VPList_SD_PrintManipulation[] PROGMEM = {
   VP_PrintProgress_Percentage, VP_PrintTime,
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
   #endif
   #if HAS_HEATED_BED
     VP_T_Bed_Is, VP_T_Bed_Set,
@@ -203,11 +203,11 @@ const uint16_t VPList_SD_PrintManipulation[] PROGMEM = {
 };
 
 const uint16_t VPList_SDPrintTune[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
   #endif
   #if HAS_HEATED_BED
     VP_T_Bed_Is, VP_T_Bed_Set,
@@ -225,11 +225,11 @@ const uint16_t VPList_StepPerMM[] PROGMEM = {
   VP_X_STEP_PER_MM,
   VP_Y_STEP_PER_MM,
   VP_Z_STEP_PER_MM,
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_E0_STEP_PER_MM,
-  #endif
-  #if HOTENDS >= 2
-    VP_E1_STEP_PER_MM,
+    #if HOTENDS >= 2
+      VP_E1_STEP_PER_MM,
+    #endif
   #endif
   0x0000
 };
@@ -268,7 +268,7 @@ const uint16_t VPList_PIDTuningWaiting[] PROGMEM = {
 };
 
 const uint16_t VPList_FLCPreheat[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set,
   #endif
   #if HAS_HEATED_BED
@@ -278,14 +278,14 @@ const uint16_t VPList_FLCPreheat[] PROGMEM = {
 };
 
 const uint16_t VPList_FLCPrinting[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_SD_Print_ProbeOffsetZ,
   #endif
   0x0000
 };
 
 const uint16_t VPList_Z_Offset[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_SD_Print_ProbeOffsetZ,
   #endif
   0x0000
@@ -319,14 +319,6 @@ const struct VPMapping VPMap[] PROGMEM = {
 
 const char MarlinVersion[] PROGMEM = SHORT_BUILD_VERSION;
 
-// Helper to define a DGUS_VP_Variable for common use cases.
-#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=sizeof(VPADRVAR), \
-  .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
-
-// Helper to define a DGUS_VP_Variable when the sizeo of the var cannot be determined automaticalyl (eg. a string)
-#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=STRLEN, \
-  .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
-
 const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   // Helper to detect touch events
   VPHELPER(VP_SCREENCHANGE, nullptr, ScreenHandler.ScreenChangeHook, nullptr),
@@ -336,92 +328,92 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   #endif
   VPHELPER(VP_CONFIRMED, nullptr, ScreenHandler.ScreenConfirmedOK, nullptr),
 
-  VPHELPER(VP_TEMP_ALL_OFF, nullptr, &ScreenHandler.HandleAllHeatersOff, nullptr),
+  VPHELPER(VP_TEMP_ALL_OFF, nullptr, ScreenHandler.HandleAllHeatersOff, nullptr),
 
   #if ENABLED(DGUS_UI_MOVE_DIS_OPTION)
-    VPHELPER(VP_MOVE_OPTION, &distanceToMove, &ScreenHandler.HandleManualMoveOption, nullptr),
+    VPHELPER(VP_MOVE_OPTION, &distanceToMove, ScreenHandler.HandleManualMoveOption, nullptr),
   #endif
   #if ENABLED(DGUS_UI_MOVE_DIS_OPTION)
-    VPHELPER(VP_MOVE_X, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_MOVE_Y, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_MOVE_Z, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_HOME_ALL, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_X, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_Y, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_Z, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_HOME_ALL, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
   #else
-    VPHELPER(VP_MOVE_X, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_MOVE_Y, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_MOVE_Z, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_HOME_ALL, nullptr, &ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_X, nullptr, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_Y, nullptr, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_Z, nullptr, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_HOME_ALL, nullptr, ScreenHandler.HandleManualMove, nullptr),
   #endif
-  VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, &ScreenHandler.HandleMotorLockUnlock, nullptr),
+  VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, ScreenHandler.HandleMotorLockUnlock, nullptr),
   #if ENABLED(POWER_LOSS_RECOVERY)
-    VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, &ScreenHandler.HandlePowerLossRecovery, nullptr),
+    VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, ScreenHandler.HandlePowerLossRecovery, nullptr),
   #endif
-  VPHELPER(VP_SETTINGS, nullptr, &ScreenHandler.HandleSettings, nullptr),
+  VPHELPER(VP_SETTINGS, nullptr, ScreenHandler.HandleSettings, nullptr),
   #if ENABLED(SINGLE_Z_CALIBRATION)
-    VPHELPER(VP_Z_CALIBRATE, nullptr, &ScreenHandler.HandleZCalibration, nullptr),
+    VPHELPER(VP_Z_CALIBRATE, nullptr, ScreenHandler.HandleZCalibration, nullptr),
   #endif
   #if ENABLED(FIRST_LAYER_CAL)
-    VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, &ScreenHandler.HandleFirstLayerCal, nullptr),
+    VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, ScreenHandler.HandleFirstLayerCal, nullptr),
   #endif
 
-  { .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
   // M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr
-  { .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay },
+  { .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplay },
 
   // Temperature Data
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_EPos, &destination.e, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
-    VPHELPER(VP_MOVE_E0, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
-    VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &ScreenHandler.HandleHeaterControl, nullptr),
-    VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
+    VPHELPER(VP_MOVE_E0, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
+    VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleHeaterControl, nullptr),
+    VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
     #if ENABLED(DGUS_PREHEAT_UI)
-      VPHELPER(VP_E0_BED_PREHEAT, nullptr, &ScreenHandler.HandlePreheat, nullptr),
+      VPHELPER(VP_E0_BED_PREHEAT, nullptr, ScreenHandler.HandlePreheat, nullptr),
     #endif
     #if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
-      VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, &ScreenHandler.HandleFilamentOption, &ScreenHandler.HandleFilamentLoadUnload),
+      VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, ScreenHandler.HandleFilamentOption, ScreenHandler.HandleFilamentLoadUnload),
     #endif
     #if ENABLED(PIDTEMP)
       VPHELPER(VP_E0_PID_P, &thermalManager.temp_hotend[0].pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
       VPHELPER(VP_E0_PID_I, &thermalManager.temp_hotend[0].pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
       VPHELPER(VP_E0_PID_D, &thermalManager.temp_hotend[0].pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
-      VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
+      VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
     #endif
   #endif
   #if HOTENDS >= 2
     VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_Flowrate_E1, nullptr, ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_MOVE_E1, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
-    VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, &ScreenHandler.HandleHeaterControl, nullptr),
-    VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
+    VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_Flowrate_E1, nullptr, ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_MOVE_E1, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
+    VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleHeaterControl, nullptr),
+    VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
   #endif
   #if HAS_HEATED_BED
     VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &ScreenHandler.HandleHeaterControl, nullptr),
-    VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
+    VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, ScreenHandler.HandleHeaterControl, nullptr),
+    VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
     #if ENABLED(PIDTEMP)
       VPHELPER(VP_BED_PID_P, &thermalManager.temp_bed.pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
       VPHELPER(VP_BED_PID_I, &thermalManager.temp_bed.pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
       VPHELPER(VP_BED_PID_D, &thermalManager.temp_bed.pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
-      VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
+      VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
     #endif
   #endif
 
   // Fan Data
   #if HAS_FAN
     #define FAN_VPHELPER(N) \
-      VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_PercentageToUint8, &ScreenHandler.DGUSLCD_SendPercentageToDisplay), \
-      VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], &ScreenHandler.HandleFanControl, nullptr), \
-      VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, &ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
+      VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_PercentageToUint8, ScreenHandler.DGUSLCD_SendPercentageToDisplay), \
+      VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], ScreenHandler.HandleFanControl, nullptr), \
+      VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
     REPEAT(FAN_COUNT, FAN_VPHELPER)
   #endif
 
   // Feedrate
-  VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, &ScreenHandler.DGUSLCD_SendWordValueToDisplay ),
+  VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
 
   // Position Data
   VPHELPER(VP_XPos, &current_position.x, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
@@ -429,23 +421,23 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   VPHELPER(VP_ZPos, &current_position.z, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
 
   // Print Progress
-  VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay ),
+  VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay),
 
   // Print Time
-  VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintTimeToDisplay ),
+  VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintTimeToDisplay),
   #if ENABLED(PRINTCOUNTER)
-    VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintAccTimeToDisplay ),
-    VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintsTotalToDisplay ),
+    VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintAccTimeToDisplay),
+    VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintsTotalToDisplay),
   #endif
 
   VPHELPER(VP_X_STEP_PER_MM, &planner.settings.axis_steps_per_mm[X_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
   VPHELPER(VP_Y_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Y_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
   VPHELPER(VP_Z_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Z_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VPHELPER(VP_E0_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(0)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
-  #endif
-  #if HOTENDS >= 2
-    VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
+    #if HOTENDS >= 2
+      VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
+    #endif
   #endif
 
   // SDCard File listing.
@@ -462,7 +454,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
     VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, ScreenHandler.DGUSLCD_SD_ReallyAbort, nullptr),
     VPHELPER(VP_SD_Print_Setting, nullptr, ScreenHandler.DGUSLCD_SD_PrintTune, nullptr),
     #if HAS_BED_PROBE
-      VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe.offset.z, ScreenHandler.HandleProbeOffsetZChanged, &ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
+      VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe.offset.z, ScreenHandler.HandleProbeOffsetZChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
       #if ENABLED(BABYSTEPPING)
         VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, ScreenHandler.HandleLiveAdjustZ, nullptr),
       #endif
@@ -474,10 +466,10 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   #endif
 
   // Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content.
-  { .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
-  { .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
-  { .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
-  { .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
 
   VPHELPER(0, 0, 0, 0)  // must be last entry.
 };
diff --git a/Marlin/src/lcd/extui/dgus/hiprecy/DGUSScreenHandler.cpp b/Marlin/src/lcd/extui/dgus/hiprecy/DGUSScreenHandler.cpp
index f3729d1253..eab5e27507 100644
--- a/Marlin/src/lcd/extui/dgus/hiprecy/DGUSScreenHandler.cpp
+++ b/Marlin/src/lcd/extui/dgus/hiprecy/DGUSScreenHandler.cpp
@@ -249,7 +249,7 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
 
     switch (var.VP) {
       default: return;
-        #if HOTENDS >= 1
+        #if HAS_HOTEND
           case VP_E0_PID_P: newvalue = value; break;
           case VP_E0_PID_I: newvalue = scalePID_i(value); break;
           case VP_E0_PID_D: newvalue = scalePID_d(value); break;
@@ -329,18 +329,18 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
     }
 
     if (filament_data.action == 0) { // Go back to utility screen
-      #if HOTENDS >= 1
+      #if HAS_HOTEND
         thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E0);
-      #endif
-      #if HOTENDS >= 2
-        thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E1);
+        #if HOTENDS >= 2
+          thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E1);
+        #endif
       #endif
       GotoScreen(DGUSLCD_SCREEN_UTILITY);
     }
     else { // Go to the preheat screen to show the heating progress
       switch (var.VP) {
         default: return;
-          #if HOTENDS >= 1
+          #if HAS_HOTEND
             case VP_E0_FILAMENT_LOAD_UNLOAD:
               filament_data.extruder = ExtUI::extruder_t::E0;
               thermalManager.setTargetHotend(e_temp, filament_data.extruder);
diff --git a/Marlin/src/lcd/extui/dgus/mks/DGUSDisplayDef.cpp b/Marlin/src/lcd/extui/dgus/mks/DGUSDisplayDef.cpp
index a18fcb14fa..d598f100de 100644
--- a/Marlin/src/lcd/extui/dgus/mks/DGUSDisplayDef.cpp
+++ b/Marlin/src/lcd/extui/dgus/mks/DGUSDisplayDef.cpp
@@ -120,11 +120,11 @@ const uint16_t VPList_Boot[] PROGMEM = {
 
 const uint16_t VPList_Main[] PROGMEM = {
   // VP_M117, for completeness, but it cannot be auto-uploaded.
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     MKSLIST_E_ITEM(0) VP_E0_STATUS,
-  #endif
-  #if HOTENDS >= 2
-    MKSLIST_E_ITEM(1)
+    #if HOTENDS >= 2
+      MKSLIST_E_ITEM(1) VP_E1_STATUS,
+    #endif
   #endif
   #if HAS_HEATED_BED
     VP_T_Bed_Is, VP_T_Bed_Set, VP_BED_STATUS,
@@ -498,20 +498,6 @@ const char MarlinVersion[] PROGMEM = SHORT_BUILD_VERSION;
 const char H43Version[] PROGMEM = "MKS H43_V1.30";
 const char Updata_Time[] PROGMEM = STRING_DISTRIBUTION_DATE;
 
-// Helper to define a DGUS_VP_Variable for common use cases.
-#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR)                       \
-  {                                                                     \
-    .VP = VPADR, .memadr = VPADRVAR, .size = sizeof(VPADRVAR),          \
-    .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR \
-  }
-
-// Helper to define a DGUS_VP_Variable when the sizeo of the var cannot be determined automaticalyl (eg. a string)
-#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR)           \
-  {                                                                     \
-    .VP = VPADR, .memadr = VPADRVAR, .size = STRLEN,                    \
-    .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR \
-  }
-
 const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   // Helper to detect touch events
   VPHELPER(VP_SCREENCHANGE, nullptr, ScreenHandler.ScreenChangeHook, nullptr),
@@ -522,109 +508,109 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   VPHELPER(VP_CONFIRMED, nullptr, ScreenHandler.ScreenConfirmedOK, nullptr),
 
   // Back Button
-  VPHELPER(VP_BACK_PAGE, nullptr, &ScreenHandler.ScreenBackChange, nullptr),
-  VPHELPER(VP_TEMP_ALL_OFF, nullptr, &ScreenHandler.HandleAllHeatersOff, nullptr),
+  VPHELPER(VP_BACK_PAGE, nullptr, ScreenHandler.ScreenBackChange, nullptr),
+  VPHELPER(VP_TEMP_ALL_OFF, nullptr, ScreenHandler.HandleAllHeatersOff, nullptr),
 
-  VPHELPER(VP_MOVE_X, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-  VPHELPER(VP_MOVE_Y, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-  VPHELPER(VP_MOVE_Z, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-  VPHELPER(VP_HOME_ALL, nullptr, &ScreenHandler.HandleManualMove, nullptr),
+  VPHELPER(VP_MOVE_X, nullptr, ScreenHandler.HandleManualMove, nullptr),
+  VPHELPER(VP_MOVE_Y, nullptr, ScreenHandler.HandleManualMove, nullptr),
+  VPHELPER(VP_MOVE_Z, nullptr, ScreenHandler.HandleManualMove, nullptr),
+  VPHELPER(VP_HOME_ALL, nullptr, ScreenHandler.HandleManualMove, nullptr),
 
-  VPHELPER(VP_X_HOME, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-  VPHELPER(VP_Y_HOME, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-  VPHELPER(VP_Z_HOME, nullptr, &ScreenHandler.HandleManualMove, nullptr),
+  VPHELPER(VP_X_HOME, nullptr, ScreenHandler.HandleManualMove, nullptr),
+  VPHELPER(VP_Y_HOME, nullptr, ScreenHandler.HandleManualMove, nullptr),
+  VPHELPER(VP_Z_HOME, nullptr, ScreenHandler.HandleManualMove, nullptr),
 
-  VPHELPER(VP_MOVE_DISTANCE, &manualMoveStep, &ScreenHandler.GetManualMovestep, nullptr),
+  VPHELPER(VP_MOVE_DISTANCE, &manualMoveStep, ScreenHandler.GetManualMovestep, nullptr),
 
-  VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-  VPHELPER(VP_LEVEL_POINT, nullptr, &ScreenHandler.ManualAssistLeveling, nullptr),
+  VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, ScreenHandler.HandleManualMove, nullptr),
+  VPHELPER(VP_LEVEL_POINT, nullptr, ScreenHandler.ManualAssistLeveling, nullptr),
 
   #if ENABLED(POWER_LOSS_RECOVERY)
-    VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, &ScreenHandler.HandlePowerLossRecovery, nullptr),
+    VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, ScreenHandler.HandlePowerLossRecovery, nullptr),
   #endif
-  VPHELPER(VP_SETTINGS, nullptr, &ScreenHandler.HandleSettings, nullptr),
+  VPHELPER(VP_SETTINGS, nullptr, ScreenHandler.HandleSettings, nullptr),
   #if ENABLED(SINGLE_Z_CALIBRATION)
-    VPHELPER(VP_Z_CALIBRATE, nullptr, &ScreenHandler.HandleZCalibration, nullptr),
+    VPHELPER(VP_Z_CALIBRATE, nullptr, ScreenHandler.HandleZCalibration, nullptr),
   #endif
   #if ENABLED(FIRST_LAYER_CAL)
-    VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, &ScreenHandler.HandleFirstLayerCal, nullptr),
+    VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, ScreenHandler.HandleFirstLayerCal, nullptr),
   #endif
-  {.VP = VP_MARLIN_VERSION, .memadr = (void *)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
+  {.VP = VP_MARLIN_VERSION, .memadr = (void *)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
   // M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr
-  {.VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay},
-  {.VP = VP_MKS_H43_VERSION, .memadr = (void *)H43Version, .size = VP_MKS_H43_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
-  {.VP = VP_MKS_H43_UpdataVERSION, .memadr = (void *)Updata_Time, .size = VP_MKS_H43_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
+  {.VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplay},
+  {.VP = VP_MKS_H43_VERSION, .memadr = (void *)H43Version, .size = VP_MKS_H43_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
+  {.VP = VP_MKS_H43_UpdataVERSION, .memadr = (void *)Updata_Time, .size = VP_MKS_H43_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
 
   // Temperature Data
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_EPos, &destination.e, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
-    VPHELPER(VP_MOVE_E0, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
-    VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &ScreenHandler.HandleHeaterControl, nullptr),
-    VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
+    VPHELPER(VP_MOVE_E0, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
+    VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleHeaterControl, nullptr),
+    VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
     #if ENABLED(DGUS_PREHEAT_UI)
-      VPHELPER(VP_E0_BED_PREHEAT, nullptr, &ScreenHandler.HandlePreheat, nullptr),
+      VPHELPER(VP_E0_BED_PREHEAT, nullptr, ScreenHandler.HandlePreheat, nullptr),
     #endif
     #if ENABLED(PIDTEMP)
       VPHELPER(VP_E0_PID_P, &thermalManager.temp_hotend[0].pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
       VPHELPER(VP_E0_PID_I, &thermalManager.temp_hotend[0].pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
       VPHELPER(VP_E0_PID_D, &thermalManager.temp_hotend[0].pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
-      VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
+      VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
     #endif
     #if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
-      VPHELPER(VP_LOAD_Filament, nullptr, &ScreenHandler.MKS_FilamentLoad, nullptr),
-      VPHELPER(VP_UNLOAD_Filament, nullptr, &ScreenHandler.MKS_FilamentUnLoad, nullptr),
-      VPHELPER(VP_Filament_distance, &distanceFilament, &ScreenHandler.GetManualFilament, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-      VPHELPER(VP_Filament_speed, &filamentSpeed_mm_s, &ScreenHandler.GetManualFilamentSpeed, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+      VPHELPER(VP_LOAD_Filament, nullptr, ScreenHandler.MKS_FilamentLoad, nullptr),
+      VPHELPER(VP_UNLOAD_Filament, nullptr, ScreenHandler.MKS_FilamentUnLoad, nullptr),
+      VPHELPER(VP_Filament_distance, &distanceFilament, ScreenHandler.GetManualFilament, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+      VPHELPER(VP_Filament_speed, &filamentSpeed_mm_s, ScreenHandler.GetManualFilamentSpeed, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     #endif
   #endif
 
   #if HOTENDS >= 2
     VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_Flowrate_E1, &planner.flow_percentage[ExtUI::extruder_t::E1], ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_MOVE_E1, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
-    VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, &ScreenHandler.HandleHeaterControl, nullptr),
-    VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
+    VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_Flowrate_E1, &planner.flow_percentage[ExtUI::extruder_t::E1], ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_MOVE_E1, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
+    VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleHeaterControl, nullptr),
+    VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
 
     #if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
-      VPHELPER(VP_Filament_distance, &distanceFilament, &ScreenHandler.GetManualFilament, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
-      VPHELPER(VP_Filament_speed, &filamentSpeed_mm_s, &ScreenHandler.GetManualFilamentSpeed, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+      VPHELPER(VP_Filament_distance, &distanceFilament, ScreenHandler.GetManualFilament, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
+      VPHELPER(VP_Filament_speed, &filamentSpeed_mm_s, ScreenHandler.GetManualFilamentSpeed, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     #endif
 
     #if ENABLED(PIDTEMP)
-      VPHELPER(VP_PID_AUTOTUNE_E1, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
+      VPHELPER(VP_PID_AUTOTUNE_E1, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
     #endif
 
-    VPHELPER(VP_E1_FILAMENT_LOAD_UNLOAD, nullptr, &ScreenHandler.HandleFilamentOption, &ScreenHandler.HandleFilamentLoadUnload),
+    VPHELPER(VP_E1_FILAMENT_LOAD_UNLOAD, nullptr, ScreenHandler.HandleFilamentOption, ScreenHandler.HandleFilamentLoadUnload),
   #endif
 
   #if HAS_HEATED_BED
     VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &ScreenHandler.HandleHeaterControl, nullptr),
-    VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
+    VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, ScreenHandler.HandleHeaterControl, nullptr),
+    VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
     #if ENABLED(PIDTEMPBED)
       VPHELPER(VP_BED_PID_P, &thermalManager.temp_bed.pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
       VPHELPER(VP_BED_PID_I, &thermalManager.temp_bed.pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
       VPHELPER(VP_BED_PID_D, &thermalManager.temp_bed.pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
-      VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
+      VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
     #endif
   #endif
 
   // Fan Data
   #if HAS_FAN
     #define FAN_VPHELPER(N)                                                                                                                    \
-      VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_SetUint8, &ScreenHandler.DGUSLCD_SendFanToDisplay), \
-      VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], &ScreenHandler.HandleFanControl, nullptr),                               \
-      VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, &ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
+      VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_SetUint8, ScreenHandler.DGUSLCD_SendFanToDisplay), \
+      VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], ScreenHandler.HandleFanControl, nullptr),                               \
+      VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
     REPEAT(FAN_COUNT, FAN_VPHELPER)
   #endif
 
   // Feedrate
-  VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+  VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
 
   // Position Data
   VPHELPER(VP_XPos, &current_position.x, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
@@ -646,8 +632,8 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   // Print Progress
   VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay),
 
-  //LCD Control
-  VPHELPER(VP_LCD_BLK, &lcd_default_light, &ScreenHandler.LCD_BLK_Adjust, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+  // LCD Control
+  VPHELPER(VP_LCD_BLK, &lcd_default_light, ScreenHandler.LCD_BLK_Adjust, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
 
   // Print Time
   VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintTimeToDisplay_MKS),
@@ -665,22 +651,22 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   VPHELPER(VP_Y_MAX_SPEED, &planner.settings.max_feedrate_mm_s[Y_AXIS], ScreenHandler.HandleMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
   VPHELPER(VP_Z_MAX_SPEED, &planner.settings.max_feedrate_mm_s[Z_AXIS], ScreenHandler.HandleMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
 
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VPHELPER(VP_E0_MAX_SPEED, &planner.settings.max_feedrate_mm_s[E_AXIS_N(0)], ScreenHandler.HandleExtruderMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
-  #endif
-  #if HOTENDS >= 2
-    VPHELPER(VP_E1_MAX_SPEED, &planner.settings.max_feedrate_mm_s[E_AXIS_N(1)], ScreenHandler.HandleExtruderMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
+    #if HOTENDS >= 2
+      VPHELPER(VP_E1_MAX_SPEED, &planner.settings.max_feedrate_mm_s[E_AXIS_N(1)], ScreenHandler.HandleExtruderMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
+    #endif
   #endif
 
   VPHELPER(VP_X_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[X_AXIS], ScreenHandler.HandleMaxAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
   VPHELPER(VP_Y_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[Y_AXIS], ScreenHandler.HandleMaxAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
   VPHELPER(VP_Z_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[Z_AXIS], ScreenHandler.HandleMaxAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
 
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VPHELPER(VP_E0_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(0)], ScreenHandler.HandleExtruderAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-  #endif
-  #if HOTENDS >= 2
-    VPHELPER(VP_E1_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(1)], ScreenHandler.HandleExtruderAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    #if HOTENDS >= 2
+      VPHELPER(VP_E1_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(1)], ScreenHandler.HandleExtruderAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    #endif
   #endif
 
   VPHELPER(VP_TRAVEL_SPEED, (uint16_t *)&planner.settings.travel_acceleration, ScreenHandler.HandleTravelAccChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
@@ -748,18 +734,17 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   VPHELPER(VP_MESH_LEVEL_POINT,nullptr, ScreenHandler.MeshLevel,nullptr),
 
   #if ENABLED(PREVENT_COLD_EXTRUSION)
-    VPHELPER(VP_Min_EX_T_E, &thermalManager.extrude_min_temp, &ScreenHandler.GetMinExtrudeTemp, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_Min_EX_T_E, &thermalManager.extrude_min_temp, ScreenHandler.GetMinExtrudeTemp, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
   #endif
 
-  VPHELPER(VP_AutoTurnOffSw, nullptr, &ScreenHandler.GetTurnOffCtrl, nullptr),
+  VPHELPER(VP_AutoTurnOffSw, nullptr, ScreenHandler.GetTurnOffCtrl, nullptr),
 
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VPHELPER(VP_E0_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(0)], ScreenHandler.HandleStepPerMMExtruderChanged_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
+    #if HOTENDS >= 2
+      VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
+    #endif
   #endif
-  #if HOTENDS >= 2
-    VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
-  #endif
-
 
   // SDCard File listing
 
@@ -781,8 +766,8 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
     VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, ScreenHandler.DGUSLCD_SD_ReallyAbort, nullptr),
     VPHELPER(VP_SD_Print_Setting, nullptr, ScreenHandler.DGUSLCD_SD_PrintTune, nullptr),
     #if ENABLED(BABYSTEPPING)
-      VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, ScreenHandler.HandleLiveAdjustZ, &ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
-      VPHELPER(VP_ZOffset_DE_DIS, &z_offset_add, nullptr, &ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
+      VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, ScreenHandler.HandleLiveAdjustZ, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
+      VPHELPER(VP_ZOffset_DE_DIS, &z_offset_add, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
     #endif
     #if HAS_BED_PROBE
       VPHELPER(VP_OFFSET_X, &probe.offset.x, ScreenHandler.GetOffsetValue,ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
@@ -798,15 +783,15 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   #endif
 
   // Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content.
-  //{.VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
-  //{.VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
-  //{.VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
-  //{.VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
-
-  {.VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS},
-  {.VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS},
-  {.VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS},
-  {.VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS},
+  //{.VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
+  //{.VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
+  //{.VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
+  //{.VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM},
+
+  {.VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS},
+  {.VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS},
+  {.VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS},
+  {.VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplay_Language_MKS},
 
   VPHELPER(0, 0, 0, 0) // must be last entry.
 };
diff --git a/Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp b/Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp
index c648d06218..74992823af 100644
--- a/Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp
+++ b/Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp
@@ -575,7 +575,6 @@ void DGUSScreenHandler::MeshLevel(DGUS_VP_Variable &var, void *val_ptr) {
           settings.save();
         }
         else if (mesh_point_count == 0) {
-
           mesh_point_count = GRID_MAX_POINTS;
           soft_endstop._enabled = true;
           settings.save();
diff --git a/Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.h b/Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.h
index 4a67b4afda..0fc4c713f0 100644
--- a/Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.h
+++ b/Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.h
@@ -189,12 +189,12 @@ public:
     static void PrintReturn(DGUS_VP_Variable &var, void *val_ptr);
   #endif
 
-  // OK Button the Confirm screen.
+  // OK Button on the Confirm screen.
   static void ScreenConfirmedOK(DGUS_VP_Variable &var, void *val_ptr);
 
-  // Update data after went to new screen (by display or by GotoScreen)
-  // remember: store the last-displayed screen, so it can get returned to.
-  // (e.g for pop up messages)
+  // Update data after going to a new screen (by display or by GotoScreen)
+  // remember: store the last-displayed screen, so it can be returned to.
+  // (e.g for popup messages)
   static void UpdateNewScreen(DGUSLCD_Screens newscreen, bool popup=false);
 
   // Recall the remembered screen.
diff --git a/Marlin/src/lcd/extui/dgus/origin/DGUSDisplayDef.cpp b/Marlin/src/lcd/extui/dgus/origin/DGUSDisplayDef.cpp
index 1c2944bb4f..b5d252a444 100644
--- a/Marlin/src/lcd/extui/dgus/origin/DGUSDisplayDef.cpp
+++ b/Marlin/src/lcd/extui/dgus/origin/DGUSDisplayDef.cpp
@@ -55,11 +55,11 @@ const uint16_t VPList_Main[] PROGMEM = {
 };
 
 const uint16_t VPList_Temp[] PROGMEM = {
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
   #endif
   #if HAS_HEATED_BED
     VP_T_Bed_Is, VP_T_Bed_Set,
@@ -69,11 +69,11 @@ const uint16_t VPList_Temp[] PROGMEM = {
 
 const uint16_t VPList_Status[] PROGMEM = {
   /* VP_M117, for completeness, but it cannot be auto-uploaded */
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_T_E0_Is, VP_T_E0_Set,
-  #endif
-  #if HOTENDS >= 2
-    VP_T_E1_Is, VP_T_E1_Set,
+    #if HOTENDS >= 2
+      VP_T_E1_Is, VP_T_E1_Set,
+    #endif
   #endif
   #if HAS_HEATED_BED
     VP_T_Bed_Is, VP_T_Bed_Set,
@@ -90,72 +90,40 @@ const uint16_t VPList_Status[] PROGMEM = {
 
 const uint16_t VPList_Status2[] PROGMEM = {
   // VP_M117, for completeness, but it cannot be auto-uploaded
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VP_Flowrate_E0,
-  #endif
-  #if HOTENDS >= 2
-    VP_Flowrate_E1,
+    #if HOTENDS >= 2
+      VP_Flowrate_E1,
+    #endif
   #endif
   VP_PrintProgress_Percentage,
   VP_PrintTime,
   0x0000
 };
-
-const uint16_t VPList_ManualMove[] PROGMEM = {
-  VP_XPos, VP_YPos, VP_ZPos,
-  0x0000
-};
-
-const uint16_t VPList_ManualExtrude[] PROGMEM = {
-  VP_EPos,
-  0x0000
-};
-
-const uint16_t VPList_FanAndFeedrate[] PROGMEM = {
-  VP_Feedrate_Percentage, VP_Fan0_Percentage,
-  0x0000
-};
-
-const uint16_t VPList_SD_FlowRates[] PROGMEM = {
-  VP_Flowrate_E0, VP_Flowrate_E1,
-  0x0000
-};
-
-const uint16_t VPList_SDFileList[] PROGMEM = {
-  VP_SD_FileName0, VP_SD_FileName1, VP_SD_FileName2, VP_SD_FileName3, VP_SD_FileName4,
-  0x0000
-};
-
-const uint16_t VPList_SD_PrintManipulation[] PROGMEM = {
-  VP_PrintProgress_Percentage, VP_PrintTime,
-  0x0000
-};
+const uint16_t VPList_ManualMove[]           PROGMEM = { VP_XPos, VP_YPos, VP_ZPos, 0x0000 };
+const uint16_t VPList_ManualExtrude[]        PROGMEM = { VP_EPos, 0x0000 };
+const uint16_t VPList_FanAndFeedrate[]       PROGMEM = { VP_Feedrate_Percentage, VP_Fan0_Percentage, 0x0000 };
+const uint16_t VPList_SD_FlowRates[]         PROGMEM = { VP_Flowrate_E0, VP_Flowrate_E1, 0x0000 };
+const uint16_t VPList_SDFileList[]           PROGMEM = { VP_SD_FileName0, VP_SD_FileName1, VP_SD_FileName2, VP_SD_FileName3, VP_SD_FileName4, 0x0000 };
+const uint16_t VPList_SD_PrintManipulation[] PROGMEM = { VP_PrintProgress_Percentage, VP_PrintTime, 0x0000 };
 
 const struct VPMapping VPMap[] PROGMEM = {
-  { DGUSLCD_SCREEN_BOOT, VPList_Boot },
-  { DGUSLCD_SCREEN_MAIN, VPList_Main },
-  { DGUSLCD_SCREEN_TEMPERATURE, VPList_Temp },
-  { DGUSLCD_SCREEN_STATUS, VPList_Status },
-  { DGUSLCD_SCREEN_STATUS2, VPList_Status2 },
-  { DGUSLCD_SCREEN_MANUALMOVE, VPList_ManualMove },
-  { DGUSLCD_SCREEN_MANUALEXTRUDE, VPList_ManualExtrude },
-  { DGUSLCD_SCREEN_FANANDFEEDRATE, VPList_FanAndFeedrate },
-  { DGUSLCD_SCREEN_FLOWRATES, VPList_SD_FlowRates },
+  { DGUSLCD_SCREEN_BOOT,                VPList_Boot                 },
+  { DGUSLCD_SCREEN_MAIN,                VPList_Main                 },
+  { DGUSLCD_SCREEN_TEMPERATURE,         VPList_Temp                 },
+  { DGUSLCD_SCREEN_STATUS,              VPList_Status               },
+  { DGUSLCD_SCREEN_STATUS2,             VPList_Status2              },
+  { DGUSLCD_SCREEN_MANUALMOVE,          VPList_ManualMove           },
+  { DGUSLCD_SCREEN_MANUALEXTRUDE,       VPList_ManualExtrude        },
+  { DGUSLCD_SCREEN_FANANDFEEDRATE,      VPList_FanAndFeedrate       },
+  { DGUSLCD_SCREEN_FLOWRATES,           VPList_SD_FlowRates         },
   { DGUSLCD_SCREEN_SDPRINTMANIPULATION, VPList_SD_PrintManipulation },
-  { DGUSLCD_SCREEN_SDFILELIST, VPList_SDFileList },
+  { DGUSLCD_SCREEN_SDFILELIST,          VPList_SDFileList           },
   { 0 , nullptr } // List is terminated with an nullptr as table entry.
 };
 
 const char MarlinVersion[] PROGMEM = SHORT_BUILD_VERSION;
 
-// Helper to define a DGUS_VP_Variable for common use cases.
-#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=sizeof(VPADRVAR), \
-  .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
-
-// Helper to define a DGUS_VP_Variable when the sizeo of the var cannot be determined automaticalyl (eg. a string)
-#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=STRLEN, \
-  .set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
-
 const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   // Helper to detect touch events
   VPHELPER(VP_SCREENCHANGE, nullptr, ScreenHandler.ScreenChangeHook, nullptr),
@@ -165,72 +133,71 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   #endif
   VPHELPER(VP_CONFIRMED, nullptr, ScreenHandler.ScreenConfirmedOK, nullptr),
 
-  VPHELPER(VP_TEMP_ALL_OFF, nullptr, &ScreenHandler.HandleAllHeatersOff, nullptr),
+  VPHELPER(VP_TEMP_ALL_OFF, nullptr, ScreenHandler.HandleAllHeatersOff, nullptr),
 
   #if ENABLED(DGUS_UI_MOVE_DIS_OPTION)
-    VPHELPER(VP_MOVE_OPTION, &distanceToMove, &ScreenHandler.HandleManualMoveOption, nullptr),
+    VPHELPER(VP_MOVE_OPTION, &distanceToMove, ScreenHandler.HandleManualMoveOption, nullptr),
   #endif
   #if ENABLED(DGUS_UI_MOVE_DIS_OPTION)
-    VPHELPER(VP_MOVE_X, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_MOVE_Y, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_MOVE_Z, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_HOME_ALL, &distanceToMove, &ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_X, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_Y, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_Z, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_HOME_ALL, &distanceToMove, ScreenHandler.HandleManualMove, nullptr),
   #else
-    VPHELPER(VP_MOVE_X, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_MOVE_Y, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_MOVE_Z, nullptr, &ScreenHandler.HandleManualMove, nullptr),
-    VPHELPER(VP_HOME_ALL, nullptr, &ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_X, nullptr, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_Y, nullptr, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_MOVE_Z, nullptr, ScreenHandler.HandleManualMove, nullptr),
+    VPHELPER(VP_HOME_ALL, nullptr, ScreenHandler.HandleManualMove, nullptr),
   #endif
 
-  VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, &ScreenHandler.HandleMotorLockUnlock, nullptr),
+  VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, ScreenHandler.HandleMotorLockUnlock, nullptr),
   #if ENABLED(POWER_LOSS_RECOVERY)
-    VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, &ScreenHandler.HandlePowerLossRecovery, nullptr),
+    VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, ScreenHandler.HandlePowerLossRecovery, nullptr),
   #endif
-  VPHELPER(VP_SETTINGS, nullptr, &ScreenHandler.HandleSettings, nullptr),
+  VPHELPER(VP_SETTINGS, nullptr, ScreenHandler.HandleSettings, nullptr),
 
-  { .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
   // M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr
-  { .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&ScreenHandler.DGUSLCD_SendStringToDisplay },
+  { .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplay },
 
   // Temperature Data
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VPHELPER(VP_T_E0_Is, nullptr, nullptr, SET_VARIABLE(getActualTemp_celsius, E0, long)),
-    VPHELPER(VP_T_E0_Set, nullptr, GET_VARIABLE(setTargetTemp_celsius, E0),
-                                   SET_VARIABLE(getTargetTemp_celsius, E0)),
-    VPHELPER(VP_Flowrate_E0, nullptr, ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_T_E0_Set, nullptr, GET_VARIABLE(setTargetTemp_celsius, E0), SET_VARIABLE(getTargetTemp_celsius, E0)),
+    VPHELPER(VP_Flowrate_E0, nullptr, ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
     VPHELPER(VP_EPos, &destination.e, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
-    VPHELPER(VP_MOVE_E0, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
-    VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &ScreenHandler.HandleHeaterControl, nullptr),
-    VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
+    VPHELPER(VP_MOVE_E0, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
+    VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, ScreenHandler.HandleHeaterControl, nullptr),
+    VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
     #if ENABLED(DGUS_PREHEAT_UI)
-      VPHELPER(VP_E0_BED_PREHEAT, nullptr, &ScreenHandler.HandlePreheat, nullptr),
+      VPHELPER(VP_E0_BED_PREHEAT, nullptr, ScreenHandler.HandlePreheat, nullptr),
     #endif
     #if ENABLED(PIDTEMP)
       VPHELPER(VP_E0_PID_P, &thermalManager.temp_hotend[0].pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
       VPHELPER(VP_E0_PID_I, &thermalManager.temp_hotend[0].pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
       VPHELPER(VP_E0_PID_D, &thermalManager.temp_hotend[0].pid.Kd, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
-      VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
+      VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
     #endif
     #if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
-      VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, &ScreenHandler.HandleFilamentOption, &ScreenHandler.HandleFilamentLoadUnload),
+      VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, ScreenHandler.HandleFilamentOption, ScreenHandler.HandleFilamentLoadUnload),
     #endif
   #endif
   #if HOTENDS >= 2
-    VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_Flowrate_E1, nullptr, ScreenHandler.HandleFlowRateChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_MOVE_E1, nullptr, &ScreenHandler.HandleManualExtrude, nullptr),
-    VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, &ScreenHandler.HandleHeaterControl, nullptr),
-    VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
+    VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_Flowrate_E1, nullptr, ScreenHandler.HandleFlowRateChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_MOVE_E1, nullptr, ScreenHandler.HandleManualExtrude, nullptr),
+    VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, ScreenHandler.HandleHeaterControl, nullptr),
+    VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
     #if ENABLED(PIDTEMP)
-      VPHELPER(VP_PID_AUTOTUNE_E1, nullptr, &ScreenHandler.HandlePIDAutotune, nullptr),
+      VPHELPER(VP_PID_AUTOTUNE_E1, nullptr, ScreenHandler.HandlePIDAutotune, nullptr),
     #endif
   #endif
   #if HAS_HEATED_BED
     VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, &ScreenHandler.DGUSLCD_SendWordValueToDisplay),
-    VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &ScreenHandler.HandleHeaterControl, nullptr),
-    VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
+    VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, ScreenHandler.HandleTemperatureChanged, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, ScreenHandler.HandleHeaterControl, nullptr),
+    VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, ScreenHandler.DGUSLCD_SendHeaterStatusToDisplay),
     #if ENABLED(PIDTEMPBED)
       VPHELPER(VP_BED_PID_P, &thermalManager.temp_bed.pid.Kp, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
       VPHELPER(VP_BED_PID_I, &thermalManager.temp_bed.pid.Ki, ScreenHandler.HandleTemperaturePIDChanged, ScreenHandler.DGUSLCD_SendTemperaturePID),
@@ -241,14 +208,14 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   // Fan Data
   #if HAS_FAN
     #define FAN_VPHELPER(N) \
-      VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_PercentageToUint8, &ScreenHandler.DGUSLCD_SendPercentageToDisplay), \
-      VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], &ScreenHandler.HandleFanControl, nullptr), \
-      VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, &ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
+      VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], ScreenHandler.DGUSLCD_PercentageToUint8, ScreenHandler.DGUSLCD_SendPercentageToDisplay), \
+      VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], ScreenHandler.HandleFanControl, nullptr), \
+      VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, ScreenHandler.DGUSLCD_SendFanStatusToDisplay),
     REPEAT(FAN_COUNT, FAN_VPHELPER)
   #endif
 
   // Feedrate
-  VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, &ScreenHandler.DGUSLCD_SendWordValueToDisplay ),
+  VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, ScreenHandler.DGUSLCD_SetValueDirectly<int16_t>, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
 
   // Position Data
   VPHELPER(VP_XPos, &current_position.x, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
@@ -256,23 +223,23 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   VPHELPER(VP_ZPos, &current_position.z, nullptr, ScreenHandler.DGUSLCD_SendFloatAsLongValueToDisplay<2>),
 
   // Print Progress
-  VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay ),
+  VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, ScreenHandler.DGUSLCD_SendPrintProgressToDisplay),
 
   // Print Time
-  VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintTimeToDisplay ),
+  VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintTimeToDisplay),
   #if ENABLED(PRINTCOUNTER)
-    VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintAccTimeToDisplay ),
-    VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintsTotalToDisplay ),
+    VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintAccTimeToDisplay),
+    VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, ScreenHandler.DGUSLCD_SendPrintsTotalToDisplay),
   #endif
 
   VPHELPER(VP_X_STEP_PER_MM, &planner.settings.axis_steps_per_mm[X_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
   VPHELPER(VP_Y_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Y_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
   VPHELPER(VP_Z_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Z_AXIS], ScreenHandler.HandleStepPerMMChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
-  #if HOTENDS >= 1
+  #if HAS_HOTEND
     VPHELPER(VP_E0_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(0)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
-  #endif
-  #if HOTENDS >= 2
-    VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
+    #if HOTENDS >= 2
+      VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], ScreenHandler.HandleStepPerMMExtruderChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<1>),
+    #endif
   #endif
 
   // SDCard File listing.
@@ -289,7 +256,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
     VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, ScreenHandler.DGUSLCD_SD_ReallyAbort, nullptr),
     VPHELPER(VP_SD_Print_Setting, nullptr, ScreenHandler.DGUSLCD_SD_PrintTune, nullptr),
     #if HAS_BED_PROBE
-      VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe.offset.z, ScreenHandler.HandleProbeOffsetZChanged, &ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
+      VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe.offset.z, ScreenHandler.HandleProbeOffsetZChanged, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<2>),
       #if ENABLED(BABYSTEPPING)
         VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, ScreenHandler.HandleLiveAdjustZ, nullptr),
       #endif
@@ -301,10 +268,10 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   #endif
 
   // Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content.
-  { .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
-  { .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
-  { .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
-  { .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
+  { .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = ScreenHandler.DGUSLCD_SendStringToDisplayPGM },
 
   VPHELPER(0, 0, 0, 0)  // must be last entry.
 };
diff --git a/Marlin/src/lcd/extui/dgus/origin/DGUSScreenHandler.cpp b/Marlin/src/lcd/extui/dgus/origin/DGUSScreenHandler.cpp
index f05dfc6f70..70efb355fc 100644
--- a/Marlin/src/lcd/extui/dgus/origin/DGUSScreenHandler.cpp
+++ b/Marlin/src/lcd/extui/dgus/origin/DGUSScreenHandler.cpp
@@ -251,7 +251,7 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
 
     switch (var.VP) {
       default: return;
-        #if HOTENDS >= 1
+        #if HAS_HOTEND
           case VP_E0_PID_P: newvalue = value; break;
           case VP_E0_PID_I: newvalue = scalePID_i(value); break;
           case VP_E0_PID_D: newvalue = scalePID_d(value); break;
@@ -331,18 +331,18 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
     }
 
     if (filament_data.action == 0) { // Go back to utility screen
-      #if HOTENDS >= 1
+      #if HAS_HOTEND
         thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E0);
-      #endif
-      #if HOTENDS >= 2
-        thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E1);
+        #if HOTENDS >= 2
+          thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E1);
+        #endif
       #endif
       GotoScreen(DGUSLCD_SCREEN_UTILITY);
     }
     else { // Go to the preheat screen to show the heating progress
       switch (var.VP) {
         default: return;
-          #if HOTENDS >= 1
+          #if HAS_HOTEND
             case VP_E0_FILAMENT_LOAD_UNLOAD:
               filament_data.extruder = ExtUI::extruder_t::E0;
               thermalManager.setTargetHotend(e_temp, filament_data.extruder);