diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index d06f2cc53c..0ba59bdb68 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index b39403b644..6277477534 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
index 7783316616..aa729faaa4 100644
--- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h	
+++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
index d304a0cc6d..14481395b5 100644
--- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
+++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 4363b13a71..01709226ba 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
index d908190de3..bdf8bf55ce 100644
--- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
+++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -603,8 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
index 7daa951f4a..cf47d26a86 100644
--- a/config/examples/Alfawise/U20/Configuration_adv.h
+++ b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index ef75f141d0..fd301b6942 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index a4219dde1c..eff097caaf 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index a4219dde1c..eff097caaf 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index adf5423739..84d89395cd 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index 19a638f211..4105782fd4 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
index 8e55b2290a..92f5fe3a8f 100644
--- a/config/examples/Anet/A8plus/Configuration_adv.h
+++ b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h
index ec4f3bcc1a..f347c161a4 100644
--- a/config/examples/Anet/E16/Configuration_adv.h
+++ b/config/examples/Anet/E16/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index b7209024df..221f945aee 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index 938dee2c97..b34a15f8e7 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -606,8 +606,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index 3743e6e8a5..5e7b56fcfa 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index af8b336a60..48f3325d27 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index 639dec6202..a9727ebbdd 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 824c6059b9..2fa88aed5c 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index 639dec6202..a9727ebbdd 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index ac6b302246..9e57c85c7a 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h
index a33448de22..3d15f58aa6 100644
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h
index 1f3fffd9ad..5c99b692fd 100644
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h
index 063103689b..13dbd86cf2 100644
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h
index 80ce0971c7..a7a38f9a41 100644
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h
index 40c008dfb9..2cfb90adae 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h	
+++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h
index 0ded478add..d205aca8e6 100644
--- a/config/examples/Creality/CR-20/Configuration_adv.h
+++ b/config/examples/Creality/CR-20/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index c0786a08c5..02531657db 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index 0e0328dc06..5daba654f9 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h
index 0fdaf6637f..e2e8e4d073 100644
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index 807b208038..09569215ea 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/Ender-5/Configuration_adv.h b/config/examples/Creality/Ender-5/Configuration_adv.h
index fde1f25ccc..2029812ea7 100644
--- a/config/examples/Creality/Ender-5/Configuration_adv.h
+++ b/config/examples/Creality/Ender-5/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
index 760e1f1425..81ad79e7b6 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h	
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
index ac355e2cbd..910b5655a3 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h	
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index 878b43b448..e404c82e8c 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h
index b6f39c7601..5ad08b99e3 100644
--- a/config/examples/FYSETC/AIO_II/Configuration_adv.h
+++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h
index 12c5ed1183..9cc8ef5639 100644
--- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h	
+++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h
index 12c5ed1183..9cc8ef5639 100644
--- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h	
+++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
index 12c5ed1183..9cc8ef5639 100644
--- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
index 12c5ed1183..9cc8ef5639 100644
--- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h
index 9966b87bf2..a835d3a22c 100644
--- a/config/examples/FYSETC/F6_13/Configuration_adv.h
+++ b/config/examples/FYSETC/F6_13/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h
index 614d605ebe..eb36a3a6cd 100644
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index 6b2cdd116c..e3d09fafcd 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 5effd2008a..104a905467 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index f56014e66a..5867d60a84 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index e2aefb530a..9827e26a6a 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -606,8 +606,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index 8a022c3cc2..dac0e9e715 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -606,8 +606,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h
index 7eeec42a73..3bb556b4c1 100644
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index b0f08ee6a1..8c5c123d40 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index 352abf998f..2f6b3c1950 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index 11debe0939..b39c4ed64c 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 7eeec42a73..3bb556b4c1 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 7eeec42a73..3bb556b4c1 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h
index 5bec81b1ef..34948a79a4 100644
--- a/config/examples/HMS434/Configuration_adv.h
+++ b/config/examples/HMS434/Configuration_adv.h
@@ -594,8 +594,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index 50e2851527..b6756a6349 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h
index c09d35acc9..91b289bfcb 100644
--- a/config/examples/JGAurora/A1/Configuration_adv.h
+++ b/config/examples/JGAurora/A1/Configuration_adv.h
@@ -607,8 +607,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index afd04fc8cb..5f4c2067ec 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h
index c09d35acc9..91b289bfcb 100644
--- a/config/examples/JGAurora/A5S/Configuration_adv.h
+++ b/config/examples/JGAurora/A5S/Configuration_adv.h
@@ -607,8 +607,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index d28b655875..5bbef202e3 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index 6c8854b1df..1c9ddcc9d1 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index 2346d9b0b6..2bdfc2cf3e 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index a23d8cfdab..b2c2de4f1e 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index 493dc21ef5..22982e2a19 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index bc1cfb38f9..3f66cd88ff 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index bb9d2c4218..7f81fa0d10 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index 13d112d9c0..b6b6c0ac1a 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h
index 555b4f9406..3f953d2431 100644
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index aff3643982..a738a4886a 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index c96c9287b6..3f064a49e0 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h
index 9de7fa2be9..ab05f960ec 100644
--- a/config/examples/Tevo/Michelangelo/Configuration_adv.h
+++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
index 59d171a582..5a9889165f 100755
--- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h	
+++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
index d860f44917..19e605c871 100755
--- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h	
+++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h
index d860f44917..19e605c871 100755
--- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h	
+++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index 7271f212a7..579d69df52 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index 7df8e8728a..2e80fae0e9 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index 418e267e2d..6ec87b9443 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index a4990e913f..ae1f353001 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 3a3784145c..a8f8af17b9 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 84ccae24b4..101dc42ed2 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index 07fc188f69..c9ae4c639a 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index bc9f4886c1..b4021204f9 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -615,8 +615,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h
index 5d4c64ab2b..fc32a6eba0 100644
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index 2b32e9f16c..f5d4f1f4dd 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 5bfe7b8b81..73308254bc 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h
index 1691f9e975..0ab060a2cf 100644
--- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index 3a99c5ce9b..561edee0ad 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
index 61bc4d581d..61a651a4b7 100644
--- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
index 61bc4d581d..61a651a4b7 100644
--- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index bb264a8a95..5a3a169813 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index bb264a8a95..5a3a169813 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 3c6dbf8097..a653ba8737 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index 0b4f164c1d..d5967de29c 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index 88e06eb1de..efb13d920e 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index 4d8b50391b..78834e4839 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index 3c6dbf8097..a653ba8737 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h
index 3c6dbf8097..a653ba8737 100644
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index cad45802d4..69a1f708df 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 85cf6c523f..e3c122fd70 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index 3737d8c93d..d61fbed6a6 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index c593516555..36a4b041db 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index d38f743c3e..46bd414204 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation