Merge pull request #1 from ErikDeBruijn/Marlin_v1_Ultimaker-rc3

Marlin v1 ultimaker rc3

Marlin/Configuration.h

@@ -108,6 +108,9 @@
 //this prevents dangerous Extruder moves, i.e. if the temperature is under the limit
 //can be software-disabled for whatever purposes by
 #define PREVENT_DANGEROUS_EXTRUDE
+//if PREVENT_DANGEROUS_EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately.
+#define PREVENT_LENGTHY_EXTRUDE
+
 #define EXTRUDE_MINTEMP 170
 #define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances.
 

Marlin/language.h

@@ -10,11 +10,20 @@
 
 #define LANGUAGE_CHOICE 1  // Pick your language from the list above
 
+#define PROTOCOL_VERSION "1.0"
+
+#ifdef MOTHERBOARD == 7
+	#define MACHINE_NAME "Ultimaker"
+	#define FIRMWARE_URL "http://firmware.ultimaker.com"
+#else
+	#define MACHINE_NAME "Mendel"
+	#define FIRMWARE_URL "http://www.mendel-parts.com"
+#endif
+
 #if LANGUAGE_CHOICE == 1
 
 // LCD Menu Messages
-
+	#define WELCOME_MSG MACHINE_NAME " Ready."
-	#define WELCOME_MSG "Printer Ready."
 	#define MSG_SD_INSERTED "Card inserted"
 	#define MSG_SD_REMOVED "Card removed"
 	#define MSG_MAIN " Main \003"
@@ -63,8 +72,8 @@
 	#define MSG_MAIN_WIDE " Main        \003"
 	#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
 	#define MSG_MOTION_WIDE " Motion      \x7E"
-	#define MSG_STORE_EPROM " Store EPROM"
+	#define MSG_STORE_EPROM " Store memory"
-	#define MSG_LOAD_EPROM " Load EPROM"
+	#define MSG_LOAD_EPROM " Load memory"
 	#define MSG_RESTORE_FAILSAFE " Restore Failsafe"
 	#define MSG_REFRESH "\004Refresh"
 	#define MSG_WATCH " Watch   \003"
@@ -76,7 +85,7 @@
 	#define MSG_CARD_MENU " Card Menu    \x7E"
 	#define MSG_NO_CARD " No Card"
 	#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
-	#define MSG_DWELL "DWELL..."		
+	#define MSG_DWELL "Sleep..."
 	#define MSG_NO_MOVE "No move."
 	#define MSG_PART_RELEASE "Partial Release"
 	#define MSG_KILLED "KILLED. "
@@ -94,7 +103,7 @@
 	#define MSG_BROWNOUT_RESET " Brown out Reset"
 	#define MSG_WATCHDOG_RESET " Watchdog Reset"
 	#define MSG_SOFTWARE_RESET " Software Reset"
-	#define MSG_MARLIN "Marlin: "
+	#define MSG_MARLIN "Marlin "
 	#define MSG_AUTHOR " | Author: "
 	#define MSG_CONFIGURATION_VER " Last Updated: "
 	#define MSG_FREE_MEMORY " Free Memory: "
@@ -116,7 +125,7 @@
 	#define MSG_HEATING_COMPLETE "Heating done."
 	#define MSG_BED_HEATING "Bed Heating."
 	#define MSG_BED_DONE "Bed done."
-	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1\n"
+	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:1\n"
 	#define MSG_COUNT_X " Count X:"
 	#define MSG_ERR_KILLED "Printer halted. kill() called !!"
 	#define MSG_ERR_STOPPED "Printer stopped deu to errors. Fix the error and use M999 to restart!. (Temperature is reset. Set it before restarting)"
@@ -157,7 +166,7 @@
 
 // LCD Menu Messages
 
-	#define WELCOME_MSG "UltiMARLIN Ready."
+	#define WELCOME_MSG MACHINE_NAME " Ready."
 
 	#define MSG_SD_INSERTED "Card inserted"
 	#define MSG_SD_REMOVED "Card removed"
@@ -263,7 +272,7 @@
 	#define MSG_HEATING_COMPLETE "Heating done."
 	#define MSG_BED_HEATING "Bed Heating."
 	#define MSG_BED_DONE "Bed done."
-	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1\n"
+	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:\n"
 	#define MSG_COUNT_X " Count X:"
 	#define MSG_ERR_KILLED "Printer halted. kill() called !!"
 	#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"

Marlin/planner.cpp

@@ -495,12 +495,14 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
       SERIAL_ECHO_START;
       SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP);
     }
+    #ifdef PREVENT_LENGTHY_EXTRUDE
     if(labs(target[E_AXIS]-position[E_AXIS])>axis_steps_per_unit[E_AXIS]*EXTRUDE_MAXLENGTH)
     {
       position[E_AXIS]=target[E_AXIS]; //behave as if the move really took place, but ignore E part
       SERIAL_ECHO_START;
       SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP);
     }
+    #endif
   #endif
   
   // Prepare to set up new block

Marlin/ultralcd.pde

@@ -1,3 +1,5 @@
+#include "language.h"
+#include "temperature.h"
 #include "ultralcd.h"
 #ifdef ULTRA_LCD
 #include "Marlin.h"
@@ -708,6 +710,7 @@ void MainMenu::showAxisMove()
           }
           break;
           case ItemAM_E:
+          // ErikDB: TODO: this length should be changed for volumetric.
           MENUITEM(  lcdprintPGM(MSG_EXTRUDE)  ,  BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E5");beepshort(); ) ;
           break;
           default: