diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 1abb48fcb4..d871f822da 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/Marlin/src/feature/tramming.h b/Marlin/src/feature/tramming.h index 79f7407716..e97fb2fde6 100644 --- a/Marlin/src/feature/tramming.h +++ b/Marlin/src/feature/tramming.h @@ -21,6 +21,7 @@ */ #include "../inc/MarlinConfigPre.h" +#include "../module/probe.h" #if !WITHIN(TRAMMING_SCREW_THREAD, 30, 51) || TRAMMING_SCREW_THREAD % 10 > 1 #error "TRAMMING_SCREW_THREAD must be equal to 30, 31, 40, 41, 50, or 51." @@ -31,6 +32,10 @@ constexpr xy_pos_t screws_tilt_adjust_pos[] = TRAMMING_POINT_XY; #define G35_PROBE_COUNT COUNT(screws_tilt_adjust_pos) static_assert(G35_PROBE_COUNT >= 3, "TRAMMING_POINT_XY requires at least 3 XY positions."); +#define VALIDATE_TRAMMING_POINT(N) static_assert(N >= G35_PROBE_COUNT || Probe::build_time::can_reach(screws_tilt_adjust_pos[N]), \ + "TRAMMING_POINT_XY point " STRINGIFY(N) " is not reachable with the default NOZZLE_TO_PROBE offset and PROBING_MARGIN.") +VALIDATE_TRAMMING_POINT(0); VALIDATE_TRAMMING_POINT(1); VALIDATE_TRAMMING_POINT(2); VALIDATE_TRAMMING_POINT(3); VALIDATE_TRAMMING_POINT(4); + extern const char point_name_1[], point_name_2[], point_name_3[] #ifdef TRAMMING_POINT_NAME_4 , point_name_4[] diff --git a/Marlin/src/feature/z_stepper_align.cpp b/Marlin/src/feature/z_stepper_align.cpp index 87b1f6f251..21fe54d0e6 100644 --- a/Marlin/src/feature/z_stepper_align.cpp +++ b/Marlin/src/feature/z_stepper_align.cpp @@ -54,25 +54,9 @@ void ZStepperAlign::reset_to_default() { #endif ); - constexpr xyz_pos_t dpo = NOZZLE_TO_PROBE_OFFSET; - - #define LTEST(N) (xy_init[N].x >= _MAX(X_MIN_BED + PROBING_MARGIN_LEFT, X_MIN_POS + dpo.x) - 0.00001f) - #define RTEST(N) (xy_init[N].x <= _MIN(X_MAX_BED - PROBING_MARGIN_RIGHT, X_MAX_POS + dpo.x) + 0.00001f) - #define FTEST(N) (xy_init[N].y >= _MAX(Y_MIN_BED + PROBING_MARGIN_FRONT, Y_MIN_POS + dpo.y) - 0.00001f) - #define BTEST(N) (xy_init[N].y <= _MIN(Y_MAX_BED - PROBING_MARGIN_BACK, Y_MAX_POS + dpo.y) + 0.00001f) - - static_assert(LTEST(0) && RTEST(0), "The 1st Z_STEPPER_ALIGN_XY X is unreachable with the default probe X offset."); - static_assert(FTEST(0) && BTEST(0), "The 1st Z_STEPPER_ALIGN_XY Y is unreachable with the default probe Y offset."); - static_assert(LTEST(1) && RTEST(1), "The 2nd Z_STEPPER_ALIGN_XY X is unreachable with the default probe X offset."); - static_assert(FTEST(1) && BTEST(1), "The 2nd Z_STEPPER_ALIGN_XY Y is unreachable with the default probe Y offset."); - #if NUM_Z_STEPPER_DRIVERS >= 3 - static_assert(LTEST(2) && RTEST(2), "The 3rd Z_STEPPER_ALIGN_XY X is unreachable with the default probe X offset."); - static_assert(FTEST(2) && BTEST(2), "The 3rd Z_STEPPER_ALIGN_XY Y is unreachable with the default probe Y offset."); - #if NUM_Z_STEPPER_DRIVERS >= 4 - static_assert(LTEST(3) && RTEST(3), "The 4th Z_STEPPER_ALIGN_XY X is unreachable with the default probe X offset."); - static_assert(FTEST(3) && BTEST(3), "The 4th Z_STEPPER_ALIGN_XY Y is unreachable with the default probe Y offset."); - #endif - #endif + #define VALIDATE_ALIGN_POINT(N) static_assert(N >= NUM_Z_STEPPER_DRIVERS || Probe::build_time::can_reach(xy_init[N]), \ + "Z_STEPPER_ALIGN_XY point " STRINGIFY(N) " is not reachable with the default NOZZLE_TO_PROBE offset and PROBING_MARGIN.") + VALIDATE_ALIGN_POINT(0); VALIDATE_ALIGN_POINT(1); VALIDATE_ALIGN_POINT(2); VALIDATE_ALIGN_POINT(3); #else // !defined(Z_STEPPER_ALIGN_XY) diff --git a/Marlin/src/lcd/menu/menu_bed_corners.cpp b/Marlin/src/lcd/menu/menu_bed_corners.cpp index 56a97b5706..2252cbc49f 100644 --- a/Marlin/src/lcd/menu/menu_bed_corners.cpp +++ b/Marlin/src/lcd/menu/menu_bed_corners.cpp @@ -77,6 +77,11 @@ constexpr xy_pos_t lf { (X_MIN_BED) + inset_lfrb[0], (Y_MIN_BED) + inset_lfrb[1] */ #if ENABLED(LEVEL_CORNERS_USE_PROBE) + #define VALIDATE_POINT(X, Y, STR) static_assert(Probe::build_time::can_reach((X), (Y)), \ + "LEVEL_CORNERS_INSET_LFRB " STR " inset is not reachable with the default NOZZLE_TO_PROBE offset and PROBING_MARGIN.") + VALIDATE_POINT(lf.x, Y_CENTER, "left"); VALIDATE_POINT(X_CENTER, lf.y, "front"); + VALIDATE_POINT(rb.x, Y_CENTER, "right"); VALIDATE_POINT(X_CENTER, rb.y, "back"); + void _lcd_draw_probing() { if (ui.should_draw()) MenuItem_static::draw((LCD_HEIGHT - 1) / 2, GET_TEXT(MSG_PROBING_MESH)); } diff --git a/Marlin/src/module/probe.h b/Marlin/src/module/probe.h index 527f1190fa..d28cdff53a 100644 --- a/Marlin/src/module/probe.h +++ b/Marlin/src/module/probe.h @@ -62,12 +62,12 @@ public: #if HAS_PROBE_XY_OFFSET // Return true if the both nozzle and the probe can reach the given point. // Note: This won't work on SCARA since the probe offset rotates with the arm. - static inline bool can_reach(const float &rx, const float &ry) { + static bool can_reach(const float &rx, const float &ry) { return position_is_reachable(rx - offset_xy.x, ry - offset_xy.y) // The nozzle can go where it needs to go? && position_is_reachable(rx, ry, ABS(PROBING_MARGIN)); // Can the nozzle also go near there? } #else - FORCE_INLINE static bool can_reach(const float &rx, const float &ry) { + static bool can_reach(const float &rx, const float &ry) { return position_is_reachable(rx, ry, PROBING_MARGIN); } #endif @@ -81,7 +81,7 @@ public: * Example: For a probe offset of -10,+10, then for the probe to reach 0,0 the * nozzle must be be able to reach +10,-10. */ - static inline bool can_reach(const float &rx, const float &ry) { + static bool can_reach(const float &rx, const float &ry) { return position_is_reachable(rx - offset_xy.x, ry - offset_xy.y) && WITHIN(rx, min_x() - fslop, max_x() + fslop) && WITHIN(ry, min_y() - fslop, max_y() + fslop); @@ -89,13 +89,13 @@ public: #endif - static inline void move_z_after_probing() { + static void move_z_after_probing() { #ifdef Z_AFTER_PROBING do_z_clearance(Z_AFTER_PROBING, true, true, true); // Move down still permitted #endif } static float probe_at_point(const float &rx, const float &ry, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool probe_relative=true, const bool sanity_check=true); - static inline float probe_at_point(const xy_pos_t &pos, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool probe_relative=true, const bool sanity_check=true) { + static float probe_at_point(const xy_pos_t &pos, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool probe_relative=true, const bool sanity_check=true) { return probe_at_point(pos.x, pos.y, raise_after, verbose_level, probe_relative, sanity_check); } @@ -105,21 +105,21 @@ public: static bool set_deployed(const bool) { return false; } - FORCE_INLINE static bool can_reach(const float &rx, const float &ry) { return position_is_reachable(rx, ry); } + static bool can_reach(const float &rx, const float &ry) { return position_is_reachable(rx, ry); } #endif - static inline void move_z_after_homing() { + static void move_z_after_homing() { #ifdef Z_AFTER_HOMING do_z_clearance(Z_AFTER_HOMING, true, true, true); - #elif BOTH(Z_AFTER_PROBING,HAS_BED_PROBE) + #elif BOTH(Z_AFTER_PROBING, HAS_BED_PROBE) move_z_after_probing(); #endif } - FORCE_INLINE static bool can_reach(const xy_pos_t &pos) { return can_reach(pos.x, pos.y); } + static bool can_reach(const xy_pos_t &pos) { return can_reach(pos.x, pos.y); } - FORCE_INLINE static bool good_bounds(const xy_pos_t &lf, const xy_pos_t &rb) { + static bool good_bounds(const xy_pos_t &lf, const xy_pos_t &rb) { return ( #if IS_KINEMATIC can_reach(lf.x, 0) && can_reach(rb.x, 0) && can_reach(0, lf.y) && can_reach(0, rb.y) @@ -137,8 +137,8 @@ public: static constexpr xy_pos_t offset_xy = xy_pos_t({ 0, 0 }); // See #16767 #endif - static inline bool deploy() { return set_deployed(true); } - static inline bool stow() { return set_deployed(false); } + static bool deploy() { return set_deployed(true); } + static bool stow() { return set_deployed(false); } #if HAS_BED_PROBE || HAS_LEVELING #if IS_KINEMATIC @@ -146,41 +146,73 @@ public: TERN_(DELTA, DELTA_PRINTABLE_RADIUS) TERN_(IS_SCARA, SCARA_PRINTABLE_RADIUS) ); - static inline float probe_radius() { - return printable_radius - _MAX(PROBING_MARGIN, HYPOT(offset_xy.x, offset_xy.y)); + static constexpr float probe_radius(const xy_pos_t &probe_offset_xy = offset_xy) { + return printable_radius - _MAX(PROBING_MARGIN, HYPOT(probe_offset_xy.x, probe_offset_xy.y)); } #endif - static inline float min_x() { + static constexpr float _min_x(const xy_pos_t &probe_offset_xy = offset_xy) { return TERN(IS_KINEMATIC, - (X_CENTER) - probe_radius(), - _MAX((X_MIN_BED) + (PROBING_MARGIN_LEFT), (X_MIN_POS) + offset_xy.x) - ) - TERN0(NOZZLE_AS_PROBE, TERN0(HAS_HOME_OFFSET, home_offset.x)); + (X_CENTER) - probe_radius(probe_offset_xy), + _MAX((X_MIN_BED) + (PROBING_MARGIN_LEFT), (X_MIN_POS) + probe_offset_xy.x) + ); } - static inline float max_x() { + static constexpr float _max_x(const xy_pos_t &probe_offset_xy = offset_xy) { return TERN(IS_KINEMATIC, - (X_CENTER) + probe_radius(), - _MIN((X_MAX_BED) - (PROBING_MARGIN_RIGHT), (X_MAX_POS) + offset_xy.x) - ) - TERN0(NOZZLE_AS_PROBE, TERN0(HAS_HOME_OFFSET, home_offset.x)); + (X_CENTER) + probe_radius(probe_offset_xy), + _MIN((X_MAX_BED) - (PROBING_MARGIN_RIGHT), (X_MAX_POS) + probe_offset_xy.x) + ); } - static inline float min_y() { + static constexpr float _min_y(const xy_pos_t &probe_offset_xy = offset_xy) { return TERN(IS_KINEMATIC, - (Y_CENTER) - probe_radius(), - _MAX((Y_MIN_BED) + (PROBING_MARGIN_FRONT), (Y_MIN_POS) + offset_xy.y) - ) - TERN0(NOZZLE_AS_PROBE, TERN0(HAS_HOME_OFFSET, home_offset.y)); + (Y_CENTER) - probe_radius(probe_offset_xy), + _MAX((Y_MIN_BED) + (PROBING_MARGIN_FRONT), (Y_MIN_POS) + probe_offset_xy.y) + ); } - static inline float max_y() { + static constexpr float _max_y(const xy_pos_t &probe_offset_xy = offset_xy) { return TERN(IS_KINEMATIC, - (Y_CENTER) + probe_radius(), - _MIN((Y_MAX_BED) - (PROBING_MARGIN_BACK), (Y_MAX_POS) + offset_xy.y) - ) - TERN0(NOZZLE_AS_PROBE, TERN0(HAS_HOME_OFFSET, home_offset.y)); + (Y_CENTER) + probe_radius(probe_offset_xy), + _MIN((Y_MAX_BED) - (PROBING_MARGIN_BACK), (Y_MAX_POS) + probe_offset_xy.y) + ); } + static float min_x() { return _min_x() - TERN0(NOZZLE_AS_PROBE, TERN0(HAS_HOME_OFFSET, home_offset.x)); } + static float max_x() { return _max_x() - TERN0(NOZZLE_AS_PROBE, TERN0(HAS_HOME_OFFSET, home_offset.x)); } + static float min_y() { return _min_y() - TERN0(NOZZLE_AS_PROBE, TERN0(HAS_HOME_OFFSET, home_offset.y)); } + static float max_y() { return _max_y() - TERN0(NOZZLE_AS_PROBE, TERN0(HAS_HOME_OFFSET, home_offset.y)); } + + // constexpr helpers used in build-time static_asserts, relying on default probe offsets. + class build_time { + static constexpr xyz_pos_t default_probe_xyz_offset = + #if HAS_BED_PROBE + NOZZLE_TO_PROBE_OFFSET + #else + { 0 } + #endif + ; + static constexpr xy_pos_t default_probe_xy_offset = { default_probe_xyz_offset.x, default_probe_xyz_offset.y }; + + public: + static constexpr bool can_reach(float x, float y) { + #if IS_KINEMATIC + return HYPOT2(x, y) <= sq(probe_radius(default_probe_xy_offset)); + #else + return WITHIN(x, _min_x(default_probe_xy_offset) - fslop, _max_x(default_probe_xy_offset) + fslop) + && WITHIN(y, _min_y(default_probe_xy_offset) - fslop, _max_y(default_probe_xy_offset) + fslop); + #endif + } + + static constexpr bool can_reach(const xy_pos_t &point) { return can_reach(point.x, point.y); } + }; + #if NEEDS_THREE_PROBE_POINTS // Retrieve three points to probe the bed. Any type exposing set(X,Y) may be used. template - static inline void get_three_points(T points[3]) { + static void get_three_points(T points[3]) { #if HAS_FIXED_3POINT + #define VALIDATE_PROBE_PT(N) static_assert(Probe::build_time::can_reach(xy_pos_t{PROBE_PT_##N##_X, PROBE_PT_##N##_Y}), \ + "PROBE_PT_" STRINGIFY(N) "_(X|Y) is unreachable using default NOZZLE_TO_PROBE_OFFSET and PROBING_MARGIN"); + VALIDATE_PROBE_PT(1); VALIDATE_PROBE_PT(2); VALIDATE_PROBE_PT(3); points[0].set(PROBE_PT_1_X, PROBE_PT_1_Y); points[1].set(PROBE_PT_2_X, PROBE_PT_2_Y); points[2].set(PROBE_PT_3_X, PROBE_PT_3_Y);