From 7f4c5b86dbfca29622474ea8572c8e3df80089b9 Mon Sep 17 00:00:00 2001
From: ScrewThisBanana <71625822+ScrewThisBanana@users.noreply.github.com>
Date: Tue, 26 Jan 2021 04:14:26 +0100
Subject: [PATCH] Adding custom move feedrate for G26 Travel moves, Original
 #20729 (#20879)

* Adding custom move feedrate for G26

This commit adds an additional configuration parameter that can be used to specify the movement speed during the G26 validation pattern command during moves without extrusion.

Closes MarlinFirmware/Marlin#20615
---
 Marlin/Configuration.h            |  1 +
 Marlin/src/gcode/bedlevel/G26.cpp | 16 +++++++++++++---
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 51d978daad..71c4256401 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -1361,6 +1361,7 @@
     #define MESH_TEST_HOTEND_TEMP  205    // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
     #define MESH_TEST_BED_TEMP      60    // (°C) Default bed temperature for the G26 Mesh Validation Tool.
     #define G26_XY_FEEDRATE         20    // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool.
+    #define G26_XY_FEEDRATE_TRAVEL 100    // (mm/s) Feedrate for XY Moves without extrusion for the G26 Mesh Validation Tool
     #define G26_RETRACT_MULTIPLIER   1.0  // G26 Q (retraction) used by default between mesh test elements.
   #endif
 
diff --git a/Marlin/src/gcode/bedlevel/G26.cpp b/Marlin/src/gcode/bedlevel/G26.cpp
index 650b039b55..c583b505cb 100644
--- a/Marlin/src/gcode/bedlevel/G26.cpp
+++ b/Marlin/src/gcode/bedlevel/G26.cpp
@@ -128,6 +128,10 @@
   #define G26_XY_FEEDRATE (PLANNER_XY_FEEDRATE() / 3.0)
 #endif
 
+#ifndef G26_XY_FEEDRATE_TRAVEL
+  #define G26_XY_FEEDRATE_TRAVEL (PLANNER_XY_FEEDRATE() / 1.5)
+#endif
+
 #if CROSSHAIRS_SIZE >= INTERSECTION_CIRCLE_RADIUS
   #error "CROSSHAIRS_SIZE must be less than INTERSECTION_CIRCLE_RADIUS."
 #endif
@@ -213,7 +217,8 @@ void move_to(const float &rx, const float &ry, const float &z, const float &e_de
 
   const xy_pos_t dest = { rx, ry };
 
-  const bool has_xy_component = dest != current_position; // Check if X or Y is involved in the movement.
+  const bool has_xy_component = dest != current_position; // Check if X or Y is involved in the movement.  
+  const bool has_e_component = e_delta != 0.0;
 
   destination = current_position;
 
@@ -224,10 +229,15 @@ void move_to(const float &rx, const float &ry, const float &z, const float &e_de
     destination = current_position;
   }
 
-  // If X or Y is involved do a 'normal' move. Otherwise retract/recover/hop.
+  // If X or Y in combination with E is involved do a 'normal' move. 
+  // If X or Y with no E is involved do a 'fast' move
+  // Otherwise retract/recover/hop.
   destination = dest;
   destination.e += e_delta;
-  const feedRate_t feed_value = has_xy_component ? feedRate_t(G26_XY_FEEDRATE) : planner.settings.max_feedrate_mm_s[E_AXIS] * 0.666f;
+  const feedRate_t feed_value = 
+    has_xy_component 
+    ? (has_e_component ? feedRate_t(G26_XY_FEEDRATE) : feedRate_t(G26_XY_FEEDRATE_TRAVEL)) 
+    : planner.settings.max_feedrate_mm_s[E_AXIS] * 0.666f;
   prepare_internal_move_to_destination(feed_value);
   destination = current_position;
 }