Mark
3 years ago
committed by
Scott Lahteine
Scott Lahteine
4 changed files with 236 additions and 0 deletions
@ -0,0 +1,222 @@ |
|||||
|
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* Based on Sprinter and grbl. |
||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
#pragma once |
||||
|
|
||||
|
#include "env_validate.h" |
||||
|
|
||||
|
#define BOARD_INFO_NAME "PANDA PI V2.9" |
||||
|
|
||||
|
// Release PB3/PB4 (TMC_SW Pins) from JTAG pins
|
||||
|
#define DISABLE_JTAG |
||||
|
|
||||
|
// Ignore temp readings during development.
|
||||
|
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
|
||||
|
|
||||
|
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) |
||||
|
#define FLASH_EEPROM_EMULATION |
||||
|
#define EEPROM_PAGE_SIZE (0x800U) // 2KB
|
||||
|
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) |
||||
|
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
|
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// Servos
|
||||
|
//
|
||||
|
#define SERVO0_PIN PA11 // SERVOS
|
||||
|
|
||||
|
//
|
||||
|
// Limit Switches
|
||||
|
//
|
||||
|
#define X_STOP_PIN PA3 // X-STOP
|
||||
|
#define Y_STOP_PIN PC9 // Y-STOP
|
||||
|
#define Z_STOP_PIN PA1 // Z-STOP
|
||||
|
|
||||
|
//
|
||||
|
// Z Probe must be this pin
|
||||
|
//
|
||||
|
//#define Z_MIN_PROBE_PIN PA1 // PROBE
|
||||
|
|
||||
|
//
|
||||
|
// Filament Runout Sensor
|
||||
|
//
|
||||
|
//#ifndef FIL_RUNOUT_PIN
|
||||
|
// #define FIL_RUNOUT_PIN PC2 // E0-STOP
|
||||
|
//#endif
|
||||
|
|
||||
|
//
|
||||
|
// Steppers
|
||||
|
//
|
||||
|
#define X_ENABLE_PIN PC12 |
||||
|
#define X_STEP_PIN PC11 |
||||
|
#define X_DIR_PIN PB6 |
||||
|
|
||||
|
#define Y_ENABLE_PIN PC12 |
||||
|
#define Y_STEP_PIN PB5 |
||||
|
#define Y_DIR_PIN PB4 |
||||
|
|
||||
|
#define Z_ENABLE_PIN PC12 |
||||
|
#define Z_STEP_PIN PB3 |
||||
|
#define Z_DIR_PIN PA15 |
||||
|
|
||||
|
#define E0_ENABLE_PIN PC12 |
||||
|
#define E0_STEP_PIN PB15 |
||||
|
#define E0_DIR_PIN PB14 |
||||
|
|
||||
|
//
|
||||
|
// Software SPI pins for TMC2130 stepper drivers
|
||||
|
//
|
||||
|
#if ENABLED(TMC_USE_SW_SPI) |
||||
|
#ifndef TMC_SW_MOSI |
||||
|
#define TMC_SW_MOSI PB5 |
||||
|
#endif |
||||
|
#ifndef TMC_SW_MISO |
||||
|
#define TMC_SW_MISO PB4 |
||||
|
#endif |
||||
|
#ifndef TMC_SW_SCK |
||||
|
#define TMC_SW_SCK PB3 |
||||
|
#endif |
||||
|
#endif |
||||
|
|
||||
|
#if HAS_TMC_UART |
||||
|
/**
|
||||
|
* TMC2208/TMC2209 stepper drivers |
||||
|
* |
||||
|
* Hardware serial communication ports. |
||||
|
* If undefined software serial is used according to the pins below |
||||
|
*/ |
||||
|
//#define X_HARDWARE_SERIAL MSerial1
|
||||
|
//#define Y_HARDWARE_SERIAL MSerial1
|
||||
|
//#define Z_HARDWARE_SERIAL MSerial1
|
||||
|
//#define E0_HARDWARE_SERIAL MSerial1
|
||||
|
|
||||
|
#define X_SERIAL_TX_PIN PC10 |
||||
|
#define X_SERIAL_RX_PIN X_SERIAL_TX_PIN |
||||
|
|
||||
|
#define Y_SERIAL_TX_PIN PC11 |
||||
|
#define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN |
||||
|
|
||||
|
#define Z_SERIAL_TX_PIN PC12 |
||||
|
#define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN |
||||
|
|
||||
|
#define E0_SERIAL_TX_PIN PD2 |
||||
|
#define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN |
||||
|
|
||||
|
// Reduce baud rate to improve software serial reliability
|
||||
|
#define TMC_BAUD_RATE 19200 |
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// Temperature Sensors
|
||||
|
//
|
||||
|
#define TEMP_0_PIN PB0 // Analog Input "TH0"
|
||||
|
#define TEMP_BED_PIN PB1 // Analog Input "TB0"
|
||||
|
#define TEMP_1_PIN PA2 |
||||
|
|
||||
|
//
|
||||
|
// Heaters / Fans
|
||||
|
//
|
||||
|
#define HEATER_0_PIN PB12 // "HE"
|
||||
|
#define HEATER_BED_PIN PB13 // "HB"
|
||||
|
#define FAN_PIN PA8 // "FAN0"
|
||||
|
#define HEATER_1_PIN PA12 |
||||
|
|
||||
|
//
|
||||
|
// SD Support
|
||||
|
//
|
||||
|
#define ONBOARD_SPI_DEVICE 1 // SPI1
|
||||
|
#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card
|
||||
|
#define SDSS ONBOARD_SD_CS_PIN |
||||
|
|
||||
|
#ifndef SDCARD_CONNECTION |
||||
|
#define SDCARD_CONNECTION ONBOARD |
||||
|
#endif |
||||
|
#if SD_CONNECTION_IS(ONBOARD) |
||||
|
//#define SD_DETECT_PIN PA4
|
||||
|
#define SD_SCK_PIN PA5 |
||||
|
#define SD_MISO_PIN PA6 |
||||
|
#define SD_MOSI_PIN PA7 |
||||
|
#elif SD_CONNECTION_IS(CUSTOM_CABLE) |
||||
|
#error "SD CUSTOM_CABLE is not compatible with SKR E3 DIP." |
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// LCD / Controller
|
||||
|
//
|
||||
|
#if HAS_WIRED_LCD |
||||
|
#define BTN_ENC PA0 |
||||
|
#define BTN_EN1 PC4 |
||||
|
#define BTN_EN2 PC5 |
||||
|
|
||||
|
#define LCD_PINS_RS PC0 |
||||
|
#define LCD_PINS_ENABLE PC2 |
||||
|
#define LCD_PINS_D4 PC1 |
||||
|
#endif |
||||
|
|
||||
|
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) |
||||
|
|
||||
|
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_E3_DIP.h' for details. Comment out this line to continue." |
||||
|
|
||||
|
/** FYSETC TFT TFT81050 display pinout
|
||||
|
* |
||||
|
* Board Display |
||||
|
* ----- ----- |
||||
|
* 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK) |
||||
|
* (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) MOD_RESET | 3 4 | SD_CS (PA10) |
||||
|
* (FREE) PB9 | 5 6 PA10 (SD_CS) (PB8) LCD_CS | 5 6 MOSI (SPI1-MOSI) |
||||
|
* RESET | 7 8 | PA9 (MOD_RESET) (PA15) SD_DET | 7 8 | RESET |
||||
|
* (BEEPER) PB6 | 9 10| PA15 (SD_DET) GND | 9 10| 5V |
||||
|
* ----- ----- |
||||
|
* EXP1 EXP1 |
||||
|
* |
||||
|
* Needs custom cable: |
||||
|
* |
||||
|
* Board Adapter Display |
||||
|
* _________ |
||||
|
* EXP1-1 ----------- EXP1-10 |
||||
|
* EXP1-2 ----------- EXP1-9 |
||||
|
* SPI1-4 ----------- EXP1-6 |
||||
|
* EXP1-4 ----------- EXP1-5 |
||||
|
* SP11-3 ----------- EXP1-2 |
||||
|
* EXP1-6 ----------- EXP1-4 |
||||
|
* EXP1-7 ----------- EXP1-8 |
||||
|
* EXP1-8 ----------- EXP1-3 |
||||
|
* SPI1-1 ----------- EXP1-1 |
||||
|
* EXP1-10 ----------- EXP1-7 |
||||
|
*/ |
||||
|
|
||||
|
#define CLCD_SPI_BUS 1 // SPI1 connector
|
||||
|
|
||||
|
#define BEEPER_PIN PB6 |
||||
|
|
||||
|
#define CLCD_MOD_RESET PA9 |
||||
|
#define CLCD_SPI_CS PB8 |
||||
|
|
||||
|
#if SD_CONNECTION_IS(LCD) && BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) |
||||
|
#define SD_DETECT_PIN PA15 |
||||
|
#define SD_SS_PIN PA10 |
||||
|
#endif |
||||
|
|
||||
|
#elif HAS_WIRED_LCD |
||||
|
|
||||
|
#define BEEPER_PIN PC3 |
||||
|
|
||||
|
#endif |
||||
Loading…
Reference in new issue