diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 11488685e9..1cdefc2bcf 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -76,7 +76,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
@@ -586,7 +586,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   //    O-- FRONT --+
   //  (0,0)
   #define X_PROBE_OFFSET_FROM_EXTRUDER -25     // X offset: -left  +right  [of the nozzle]
-  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle] 
+  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
   #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h
index c5113004cc..3707f72a4c 100644
--- a/Marlin/example_configurations/Felix/Configuration_DUAL.h
+++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h
@@ -76,7 +76,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
@@ -583,7 +583,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   //    O-- FRONT --+
   //  (0,0)
   #define X_PROBE_OFFSET_FROM_EXTRUDER -25     // X offset: -left  +right  [of the nozzle]
-  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle] 
+  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
   #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index adf056e6a4..395bb8e761 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -76,7 +76,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
@@ -596,7 +596,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   //    O-- FRONT --+
   //  (0,0)
   #define X_PROBE_OFFSET_FROM_EXTRUDER -25     // X offset: -left  +right  [of the nozzle]
-  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle] 
+  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
   #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h
index 866556d6a2..0dbb1d7633 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@@ -76,7 +76,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
@@ -598,7 +598,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   //    O-- FRONT --+
   //  (0,0)
   #define X_PROBE_OFFSET_FROM_EXTRUDER 34  // X offset: -left  +right  [of the nozzle]
-  #define Y_PROBE_OFFSET_FROM_EXTRUDER 15  // Y offset: -front +behind [the nozzle] 
+  #define Y_PROBE_OFFSET_FROM_EXTRUDER 15  // Y offset: -front +behind [the nozzle]
   #define Z_PROBE_OFFSET_FROM_EXTRUDER 0   // Z offset: -below +above  [the nozzle]
 
   #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 4480757fe9..e7ceafeff0 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -83,7 +83,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
@@ -621,7 +621,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   //    O-- FRONT --+
   //  (0,0)
   #define X_PROBE_OFFSET_FROM_EXTRUDER -25     // X offset: -left  +right  [of the nozzle]
-  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle] 
+  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
   #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index b8bbfe459e..3f6208345c 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -76,7 +76,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
@@ -604,7 +604,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   //    O-- FRONT --+
   //  (0,0)
   #define X_PROBE_OFFSET_FROM_EXTRUDER -25     // X offset: -left  +right  [of the nozzle]
-  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle] 
+  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
   #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index f147f7caf9..82b66ef9d1 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -76,7 +76,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
@@ -598,7 +598,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   //    O-- FRONT --+
   //  (0,0)
   #define X_PROBE_OFFSET_FROM_EXTRUDER -25     // X offset: -left  +right  [of the nozzle]
-  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle] 
+  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
   #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 8fc4e22ccd..808bf7e62f 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -101,7 +101,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
@@ -612,7 +612,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   //    O-- FRONT --+
   //  (0,0)
   #define X_PROBE_OFFSET_FROM_EXTRUDER -25     // X offset: -left  +right  [of the nozzle]
-  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle] 
+  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
   #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index 3f68ad16b4..6c8165ea0e 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -76,7 +76,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
@@ -625,7 +625,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   //    O-- FRONT --+
   //  (0,0)
   #define X_PROBE_OFFSET_FROM_EXTRUDER -25     // X offset: -left  +right  [of the nozzle]
-  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle] 
+  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
   #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 79469c7887..434143e38f 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -76,7 +76,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
@@ -596,7 +596,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   //    O-- FRONT --+
   //  (0,0)
   #define X_PROBE_OFFSET_FROM_EXTRUDER -25     // X offset: -left  +right  [of the nozzle]
-  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle] 
+  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
   #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 34933b7746..f941bb0d1c 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -76,7 +76,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
@@ -604,7 +604,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   //    O-- FRONT --+
   //  (0,0)
   #define X_PROBE_OFFSET_FROM_EXTRUDER -25     // X offset: -left  +right  [of the nozzle]
-  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle] 
+  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
   #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h
index 561b0acdfe..40d6e9af80 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@@ -76,7 +76,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
@@ -650,7 +650,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   //    O-- FRONT --+
   //  (0,0)
   #define X_PROBE_OFFSET_FROM_EXTRUDER 0     // X offset: -left  +right  [of the nozzle]
-  #define Y_PROBE_OFFSET_FROM_EXTRUDER -10   // Y offset: -front +behind [the nozzle] 
+  #define Y_PROBE_OFFSET_FROM_EXTRUDER -10   // Y offset: -front +behind [the nozzle]
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5  // Z offset: -below +above  [the nozzle]
 
   #define XY_TRAVEL_SPEED 4000         // X and Y axis travel speed between probes, in mm/min.
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 1ccee086bb..c492573f5a 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -76,7 +76,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
@@ -650,7 +650,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   //    O-- FRONT --+
   //  (0,0)
   #define X_PROBE_OFFSET_FROM_EXTRUDER 0     // X offset: -left  +right  [of the nozzle]
-  #define Y_PROBE_OFFSET_FROM_EXTRUDER -10   // Y offset: -front +behind [the nozzle] 
+  #define Y_PROBE_OFFSET_FROM_EXTRUDER -10   // Y offset: -front +behind [the nozzle]
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5  // Z offset: -below +above  [the nozzle]
 
   #define XY_TRAVEL_SPEED 4000         // X and Y axis travel speed between probes, in mm/min.
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index c3e3e3c402..e77eb33795 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -76,7 +76,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
@@ -650,7 +650,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   //    O-- FRONT --+
   //  (0,0)
   #define X_PROBE_OFFSET_FROM_EXTRUDER 0     // X offset: -left  +right  [of the nozzle]
-  #define Y_PROBE_OFFSET_FROM_EXTRUDER -10   // Y offset: -front +behind [the nozzle] 
+  #define Y_PROBE_OFFSET_FROM_EXTRUDER -10   // Y offset: -front +behind [the nozzle]
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5  // Z offset: -below +above  [the nozzle]
 
   #define XY_TRAVEL_SPEED 4000         // X and Y axis travel speed between probes, in mm/min.
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index 3721839722..b5c9c76c6f 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -82,7 +82,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index 483aa78a8a..943443fb4a 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -69,7 +69,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 2f5cfce4f3..2b414100f5 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -76,7 +76,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
@@ -607,7 +607,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   //    O-- FRONT --+
   //  (0,0)
   #define X_PROBE_OFFSET_FROM_EXTRUDER -25     // X offset: -left  +right  [of the nozzle]
-  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle] 
+  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
   #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 514fbef333..59cfe714d5 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -76,7 +76,7 @@
 #if ENABLED(USE_AUTOMATIC_VERSIONING)
   #include "_Version.h"
 #else
-  #include "Default_Version.h"
+  #include "Version.h"
 #endif
 
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
@@ -594,7 +594,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   //    O-- FRONT --+
   //  (0,0)
   #define X_PROBE_OFFSET_FROM_EXTRUDER -25     // X offset: -left  +right  [of the nozzle]
-  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle] 
+  #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
   #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min.