From 7c37a828219d7ba809f889beaf4713a472420268 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 5 Mar 2021 04:30:52 -0600 Subject: [PATCH] Tweak tests, consolidate pins target validation (#21254) --- Marlin/src/pins/esp32/env_validate.h | 26 ++++++++++++ Marlin/src/pins/esp32/pins_E4D.h | 6 +-- Marlin/src/pins/esp32/pins_ESP32.h | 4 +- Marlin/src/pins/esp32/pins_FYSETC_E4.h | 6 +-- Marlin/src/pins/esp32/pins_MRR_ESPA.h | 6 +-- Marlin/src/pins/esp32/pins_MRR_ESPE.h | 6 +-- Marlin/src/pins/lpc1768/env_validate.h | 30 +++++++++++++ Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h | 4 +- Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h | 4 +- Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h | 4 +- Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h | 6 +-- Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h | 8 +--- Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h | 4 +- Marlin/src/pins/lpc1768/pins_MKS_SBASE.h | 6 +-- Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h | 4 +- Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h | 4 +- Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h | 4 +- Marlin/src/pins/lpc1769/env_validate.h | 26 ++++++++++++ Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h | 4 +- Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h | 5 +-- .../pins/lpc1769/pins_AZTEEG_X5_MINI_WIFI.h | 6 +-- .../src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h | 2 + .../pins/lpc1769/pins_BTT_SKR_V1_4_TURBO.h | 2 +- .../src/pins/lpc1769/pins_COHESION3D_MINI.h | 4 +- .../src/pins/lpc1769/pins_COHESION3D_REMIX.h | 4 +- Marlin/src/pins/lpc1769/pins_FLY_CDY.h | 4 +- Marlin/src/pins/lpc1769/pins_MKS_SGEN.h | 6 +-- Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h | 4 +- Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h | 4 +- Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h | 4 +- Marlin/src/pins/mega/env_validate.h | 30 +++++++++++++ Marlin/src/pins/mega/pins_CHEAPTRONIC.h | 4 +- Marlin/src/pins/mega/pins_CHEAPTRONICv2.h | 4 +- Marlin/src/pins/mega/pins_CNCONTROLS_11.h | 5 +-- Marlin/src/pins/mega/pins_CNCONTROLS_12.h | 5 +-- Marlin/src/pins/mega/pins_CNCONTROLS_15.h | 5 +-- Marlin/src/pins/mega/pins_EINSTART-S.h | 5 +-- Marlin/src/pins/mega/pins_ELEFU_3.h | 4 +- Marlin/src/pins/mega/pins_GT2560_REV_A.h | 5 +-- Marlin/src/pins/mega/pins_GT2560_V3.h | 5 +-- Marlin/src/pins/mega/pins_HJC2560C_REV2.h | 4 +- Marlin/src/pins/mega/pins_INTAMSYS40.h | 4 +- Marlin/src/pins/mega/pins_LEAPFROG.h | 5 +-- Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h | 4 +- Marlin/src/pins/mega/pins_MEGACONTROLLER.h | 6 +-- Marlin/src/pins/mega/pins_MEGATRONICS.h | 4 +- Marlin/src/pins/mega/pins_MEGATRONICS_2.h | 4 +- Marlin/src/pins/mega/pins_MEGATRONICS_3.h | 4 +- Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h | 5 +-- Marlin/src/pins/mega/pins_OVERLORD.h | 6 +-- Marlin/src/pins/mega/pins_PICA.h | 6 +-- Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h | 4 +- Marlin/src/pins/pins.h | 2 +- Marlin/src/pins/pinsDebug.h | 4 +- Marlin/src/pins/rambo/env_validate.h | 26 ++++++++++++ Marlin/src/pins/rambo/pins_EINSY_RAMBO.h | 4 +- Marlin/src/pins/rambo/pins_EINSY_RETRO.h | 4 +- Marlin/src/pins/rambo/pins_MINIRAMBO.h | 4 +- Marlin/src/pins/rambo/pins_RAMBO.h | 4 +- Marlin/src/pins/rambo/pins_SCOOVO_X9H.h | 4 +- Marlin/src/pins/ramps/env_validate.h | 35 ++++++++++++++++ Marlin/src/pins/ramps/pins_AZTEEG_X3.h | 7 ++-- Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h | 7 ++-- Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h | 5 +-- .../src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h | 5 +-- Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h | 7 ++-- .../src/pins/ramps/pins_FORMBOT_TREX2PLUS.h | 7 ++-- Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h | 7 ++-- Marlin/src/pins/ramps/pins_K8800.h | 4 +- Marlin/src/pins/ramps/pins_LONGER3D_LKx_PRO.h | 10 ++--- Marlin/src/pins/ramps/pins_RAMPS.h | 13 +----- Marlin/src/pins/ramps/pins_RAMPS_OLD.h | 4 +- Marlin/src/pins/ramps/pins_RAMPS_PLUS.h | 4 +- Marlin/src/pins/ramps/pins_RAMPS_S_12.h | 7 +--- Marlin/src/pins/ramps/pins_RUMBA.h | 7 ++-- Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h | 7 ++-- Marlin/src/pins/ramps/pins_TRONXY_V3_1_0.h | 7 ++-- Marlin/src/pins/ramps/pins_TT_OSCAR.h | 4 +- Marlin/src/pins/ramps/pins_ULTIMAIN_2.h | 5 +-- Marlin/src/pins/ramps/pins_ULTIMAKER.h | 4 +- Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h | 4 +- Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h | 7 ++-- Marlin/src/pins/sam/env_validate.h | 33 +++++++++++++++ Marlin/src/pins/sam/pins_ADSK.h | 6 +-- Marlin/src/pins/sam/pins_ALLIGATOR_R2.h | 4 +- Marlin/src/pins/sam/pins_CNCONTROLS_15D.h | 4 +- Marlin/src/pins/sam/pins_DUE3DOM.h | 4 +- Marlin/src/pins/sam/pins_DUE3DOM_MINI.h | 4 +- Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h | 4 +- Marlin/src/pins/sam/pins_RADDS.h | 4 +- Marlin/src/pins/sam/pins_RAMPS4DUE.h | 7 +--- Marlin/src/pins/sam/pins_RAMPS_DUO.h | 7 +--- Marlin/src/pins/sam/pins_RAMPS_FD_V1.h | 4 +- Marlin/src/pins/sam/pins_RAMPS_SMART.h | 6 +-- Marlin/src/pins/sam/pins_RURAMPS4D_11.h | 4 +- Marlin/src/pins/sam/pins_RURAMPS4D_13.h | 4 +- Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h | 4 +- Marlin/src/pins/sanguino/env_validate.h | 42 +++++++++++++++++++ .../src/pins/sanguino/pins_GEN3_MONOLITHIC.h | 5 +-- Marlin/src/pins/sanguino/pins_GEN3_PLUS.h | 5 +-- Marlin/src/pins/sanguino/pins_GEN6.h | 5 +-- Marlin/src/pins/sanguino/pins_GEN7_12.h | 5 +-- Marlin/src/pins/sanguino/pins_GEN7_14.h | 5 +-- Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h | 5 +-- Marlin/src/pins/sanguino/pins_OMCA_A.h | 2 +- .../src/pins/sanguino/pins_SANGUINOLOLU_11.h | 5 +-- Marlin/src/pins/sanguino/pins_SETHI.h | 5 +-- Marlin/src/pins/sanguino/pins_ZMIB_V2.h | 5 +-- Marlin/src/pins/stm32f1/env_validate.h | 26 ++++++++++++ Marlin/src/pins/stm32f1/pins_BEAST.h | 4 +- Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h | 4 +- Marlin/src/pins/stm32f1/pins_CHITU3D.h | 4 +- Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h | 4 +- Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h | 4 +- Marlin/src/pins/stm32f1/pins_CREALITY_V4.h | 6 +-- Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h | 6 +-- Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h | 4 +- Marlin/src/pins/stm32f1/pins_FLY_MINI.h | 4 +- Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h | 4 +- Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h | 4 +- .../pins/stm32f1/pins_FYSETC_CHEETAH_V12.h | 4 +- Marlin/src/pins/stm32f1/pins_GTM32_MINI.h | 4 +- Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h | 4 +- Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h | 4 +- Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h | 4 +- .../src/pins/stm32f1/pins_JGAURORA_A5S_A1.h | 6 +-- Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h | 6 +-- .../pins/stm32f1/pins_MKS_ROBIN_E3_common.h | 4 +- Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h | 6 +-- .../src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h | 6 +-- Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h | 6 +-- Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h | 6 +-- Marlin/src/pins/stm32f1/pins_STM32F1R.h | 4 +- Marlin/src/pins/stm32f1/pins_STM3R_MINI.h | 4 +- Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h | 6 +-- Marlin/src/pins/stm32f4/env_validate.h | 28 +++++++++++++ Marlin/src/pins/stm32f4/pins_ANET_ET4.h | 8 ++-- Marlin/src/pins/stm32f4/pins_ARMED.h | 6 +-- .../src/pins/stm32f4/pins_BLACK_STM32F407VE.h | 7 ++-- .../src/pins/stm32f4/pins_BTT_BTT002_V1_0.h | 6 +-- Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h | 6 +-- .../pins/stm32f4/pins_BTT_SKR_PRO_common.h | 4 +- Marlin/src/pins/stm32f4/pins_FLYF407ZG.h | 7 ++-- .../pins/stm32f4/pins_FYSETC_CHEETAH_V20.h | 4 +- Marlin/src/pins/stm32f4/pins_FYSETC_S6.h | 6 +-- Marlin/src/pins/stm32f4/pins_LERDGE_K.h | 7 ++-- Marlin/src/pins/stm32f4/pins_LERDGE_S.h | 7 ++-- Marlin/src/pins/stm32f4/pins_LERDGE_X.h | 7 ++-- Marlin/src/pins/stm32f4/pins_MKS_ROBIN2.h | 6 +-- .../src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h | 7 ++-- .../src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h | 7 ++-- Marlin/src/pins/stm32f4/pins_RUMBA32_common.h | 6 +-- .../src/pins/stm32f4/pins_STEVAL_3DP001V1.h | 4 +- Marlin/src/pins/stm32f4/pins_VAKE403D.h | 7 ++-- Marlin/src/pins/teensy2/env_validate.h | 28 +++++++++++++ Marlin/src/pins/teensy2/pins_5DPRINT.h | 4 +- Marlin/src/pins/teensy2/pins_BRAINWAVE.h | 2 +- Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h | 4 +- Marlin/src/pins/teensy2/pins_PRINTRBOARD.h | 4 +- .../src/pins/teensy2/pins_PRINTRBOARD_REVF.h | 4 +- Marlin/src/pins/teensy2/pins_SAV_MKI.h | 4 +- Marlin/src/pins/teensy2/pins_TEENSY2.h | 4 +- Marlin/src/pins/teensy2/pins_TEENSYLU.h | 3 ++ buildroot/bin/mftest | 11 +++-- buildroot/{tests => bin}/run_tests | 16 +++---- .../scripts/common-dependencies-post.py | 16 ------- .../PlatformIO/scripts/preflight-checks.py | 3 +- buildroot/tests/{ARMED-tests => ARMED} | 0 .../{BIGTREE_BTT002-tests => BIGTREE_BTT002} | 0 ...IGTREE_GTR_V1_0-tests => BIGTREE_GTR_V1_0} | 0 ...tests => BIGTREE_GTR_V1_0_usb_flash_drive} | 0 ...{BIGTREE_SKR_PRO-tests => BIGTREE_SKR_PRO} | 0 buildroot/tests/{DUE-tests => DUE} | 0 .../tests/{DUE_archim-tests => DUE_archim} | 0 .../tests/{FLYF407ZG-tests => FLYF407ZG} | 0 .../tests/{FYSETC_F6-tests => FYSETC_F6} | 0 .../tests/{FYSETC_S6-tests => FYSETC_S6} | 0 buildroot/tests/{LERDGEX-tests => LERDGEX} | 0 buildroot/tests/{LPC1768-tests => LPC1768} | 0 buildroot/tests/{LPC1769-tests => LPC1769} | 0 .../{NUCLEO_F767ZI-tests => NUCLEO_F767ZI} | 0 .../tests/{REMRAM_V1-tests => REMRAM_V1} | 0 ...entral_m4-tests => SAMD51_grandcentral_m4} | 0 ...F070CB_malyan-tests => STM32F070CB_malyan} | 0 ...F070RB_malyan-tests => STM32F070RB_malyan} | 0 ...F103CB_malyan-tests => STM32F103CB_malyan} | 0 ...{STM32F103RC_btt-tests => STM32F103RC_btt} | 0 ...03RC_btt_USB-tests => STM32F103RC_btt_USB} | 0 ...F103RC_fysetc-tests => STM32F103RC_fysetc} | 0 ...TM32F103RC_meeb-tests => STM32F103RC_meeb} | 0 .../tests/{STM32F103RE-tests => STM32F103RE} | 0 ..._creality-tests => STM32F103RET6_creality} | 0 ...{STM32F103RE_btt-tests => STM32F103RE_btt} | 0 ...03RE_btt_USB-tests => STM32F103RE_btt_USB} | 0 ...F103VE_longer-tests => STM32F103VE_longer} | 0 ...F401VE_STEVAL-tests => STM32F401VE_STEVAL} | 0 ...32F407VE_black-tests => STM32F407VE_black} | 0 ...{at90usb1286_cdc-tests => at90usb1286_cdc} | 0 ...{at90usb1286_dfu-tests => at90usb1286_dfu} | 0 buildroot/tests/{esp32-tests => esp32} | 0 ...{jgaurora_a5s_a1-tests => jgaurora_a5s_a1} | 0 .../{linux_native-tests => linux_native} | 0 .../tests/{malyan_M300-tests => malyan_M300} | 0 buildroot/tests/{mega1280-tests => mega1280} | 0 buildroot/tests/{mega2560-tests => mega2560} | 0 .../tests/{mks_robin-tests => mks_robin} | 0 .../{mks_robin_lite-tests => mks_robin_lite} | 0 .../{mks_robin_mini-tests => mks_robin_mini} | 0 ...ks_robin_nano35-tests => mks_robin_nano35} | 0 ...o35_stm32-tests => mks_robin_nano35_stm32} | 0 .../{mks_robin_pro-tests => mks_robin_pro} | 0 ...{mks_robin_stm32-tests => mks_robin_stm32} | 0 buildroot/tests/{rambo-tests => rambo} | 0 buildroot/tests/{rumba32-tests => rumba32} | 0 .../{sanguino1284p-tests => sanguino1284p} | 0 .../{sanguino644p-tests => sanguino644p} | 0 buildroot/tests/{teensy31-tests => teensy31} | 0 buildroot/tests/{teensy35-tests => teensy35} | 0 buildroot/tests/{teensy41-tests => teensy41} | 0 platformio.ini | 7 +++- 220 files changed, 631 insertions(+), 509 deletions(-) create mode 100644 Marlin/src/pins/esp32/env_validate.h create mode 100644 Marlin/src/pins/lpc1768/env_validate.h create mode 100644 Marlin/src/pins/lpc1769/env_validate.h create mode 100644 Marlin/src/pins/mega/env_validate.h create mode 100644 Marlin/src/pins/rambo/env_validate.h create mode 100644 Marlin/src/pins/ramps/env_validate.h create mode 100644 Marlin/src/pins/sam/env_validate.h create mode 100644 Marlin/src/pins/sanguino/env_validate.h create mode 100644 Marlin/src/pins/stm32f1/env_validate.h create mode 100644 Marlin/src/pins/stm32f4/env_validate.h create mode 100644 Marlin/src/pins/teensy2/env_validate.h rename buildroot/{tests => bin}/run_tests (79%) delete mode 100644 buildroot/share/PlatformIO/scripts/common-dependencies-post.py rename buildroot/tests/{ARMED-tests => ARMED} (100%) rename buildroot/tests/{BIGTREE_BTT002-tests => BIGTREE_BTT002} (100%) rename buildroot/tests/{BIGTREE_GTR_V1_0-tests => BIGTREE_GTR_V1_0} (100%) rename buildroot/tests/{BIGTREE_GTR_V1_0_usb_flash_drive-tests => BIGTREE_GTR_V1_0_usb_flash_drive} (100%) rename buildroot/tests/{BIGTREE_SKR_PRO-tests => BIGTREE_SKR_PRO} (100%) rename buildroot/tests/{DUE-tests => DUE} (100%) rename buildroot/tests/{DUE_archim-tests => DUE_archim} (100%) rename buildroot/tests/{FLYF407ZG-tests => FLYF407ZG} (100%) rename buildroot/tests/{FYSETC_F6-tests => FYSETC_F6} (100%) rename buildroot/tests/{FYSETC_S6-tests => FYSETC_S6} (100%) rename buildroot/tests/{LERDGEX-tests => LERDGEX} (100%) rename buildroot/tests/{LPC1768-tests => LPC1768} (100%) rename buildroot/tests/{LPC1769-tests => LPC1769} (100%) rename buildroot/tests/{NUCLEO_F767ZI-tests => NUCLEO_F767ZI} (100%) rename buildroot/tests/{REMRAM_V1-tests => REMRAM_V1} (100%) rename buildroot/tests/{SAMD51_grandcentral_m4-tests => SAMD51_grandcentral_m4} (100%) rename buildroot/tests/{STM32F070CB_malyan-tests => STM32F070CB_malyan} (100%) rename buildroot/tests/{STM32F070RB_malyan-tests => STM32F070RB_malyan} (100%) rename buildroot/tests/{STM32F103CB_malyan-tests => STM32F103CB_malyan} (100%) rename buildroot/tests/{STM32F103RC_btt-tests => STM32F103RC_btt} (100%) rename buildroot/tests/{STM32F103RC_btt_USB-tests => STM32F103RC_btt_USB} (100%) rename buildroot/tests/{STM32F103RC_fysetc-tests => STM32F103RC_fysetc} (100%) rename buildroot/tests/{STM32F103RC_meeb-tests => STM32F103RC_meeb} (100%) rename buildroot/tests/{STM32F103RE-tests => STM32F103RE} (100%) rename buildroot/tests/{STM32F103RET6_creality-tests => STM32F103RET6_creality} (100%) rename buildroot/tests/{STM32F103RE_btt-tests => STM32F103RE_btt} (100%) rename buildroot/tests/{STM32F103RE_btt_USB-tests => STM32F103RE_btt_USB} (100%) rename buildroot/tests/{STM32F103VE_longer-tests => STM32F103VE_longer} (100%) rename buildroot/tests/{STM32F401VE_STEVAL-tests => STM32F401VE_STEVAL} (100%) rename buildroot/tests/{STM32F407VE_black-tests => STM32F407VE_black} (100%) rename buildroot/tests/{at90usb1286_cdc-tests => at90usb1286_cdc} (100%) rename buildroot/tests/{at90usb1286_dfu-tests => at90usb1286_dfu} (100%) rename buildroot/tests/{esp32-tests => esp32} (100%) rename buildroot/tests/{jgaurora_a5s_a1-tests => jgaurora_a5s_a1} (100%) rename buildroot/tests/{linux_native-tests => linux_native} (100%) rename buildroot/tests/{malyan_M300-tests => malyan_M300} (100%) rename buildroot/tests/{mega1280-tests => mega1280} (100%) rename buildroot/tests/{mega2560-tests => mega2560} (100%) rename buildroot/tests/{mks_robin-tests => mks_robin} (100%) rename buildroot/tests/{mks_robin_lite-tests => mks_robin_lite} (100%) rename buildroot/tests/{mks_robin_mini-tests => mks_robin_mini} (100%) rename buildroot/tests/{mks_robin_nano35-tests => mks_robin_nano35} (100%) rename buildroot/tests/{mks_robin_nano35_stm32-tests => mks_robin_nano35_stm32} (100%) rename buildroot/tests/{mks_robin_pro-tests => mks_robin_pro} (100%) rename buildroot/tests/{mks_robin_stm32-tests => mks_robin_stm32} (100%) rename buildroot/tests/{rambo-tests => rambo} (100%) rename buildroot/tests/{rumba32-tests => rumba32} (100%) rename buildroot/tests/{sanguino1284p-tests => sanguino1284p} (100%) rename buildroot/tests/{sanguino644p-tests => sanguino644p} (100%) rename buildroot/tests/{teensy31-tests => teensy31} (100%) rename buildroot/tests/{teensy35-tests => teensy35} (100%) rename buildroot/tests/{teensy41-tests => teensy41} (100%) diff --git a/Marlin/src/pins/esp32/env_validate.h b/Marlin/src/pins/esp32/env_validate.h new file mode 100644 index 0000000000..ce14c33414 --- /dev/null +++ b/Marlin/src/pins/esp32/env_validate.h @@ -0,0 +1,26 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#if NOT_TARGET(ARDUINO_ARCH_ESP32) + #error "Oops! Select an ESP32 board in 'Tools > Board.'" +#endif diff --git a/Marlin/src/pins/esp32/pins_E4D.h b/Marlin/src/pins/esp32/pins_E4D.h index 4a5a2bf9b0..9e28af2190 100644 --- a/Marlin/src/pins/esp32/pins_E4D.h +++ b/Marlin/src/pins/esp32/pins_E4D.h @@ -27,9 +27,9 @@ * for more info check https://atbox.tech/ and join to Facebook page E4d@box. */ -#if NOT_TARGET(ARDUINO_ARCH_ESP32) - #error "Oops! Select an ESP32 board in 'Tools > Board.'" -#elif EXTRUDERS > 1 || E_STEPPERS > 1 +#include "env_validate.h" + +#if EXTRUDERS > 1 || E_STEPPERS > 1 #error "E4d@box only supports one E Stepper. Comment out this line to continue." #elif HOTENDS > 1 #error "E4d@box only supports one hotend / E-stepper. Comment out this line to continue." diff --git a/Marlin/src/pins/esp32/pins_ESP32.h b/Marlin/src/pins/esp32/pins_ESP32.h index d54a92b9c4..6578770ba0 100644 --- a/Marlin/src/pins/esp32/pins_ESP32.h +++ b/Marlin/src/pins/esp32/pins_ESP32.h @@ -25,9 +25,7 @@ * Espressif ESP32 (Tensilica Xtensa LX6) pin assignments */ -#if NOT_TARGET(ARDUINO_ARCH_ESP32) - "Oops! Select an ESP32 board in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Espressif ESP32" diff --git a/Marlin/src/pins/esp32/pins_FYSETC_E4.h b/Marlin/src/pins/esp32/pins_FYSETC_E4.h index 50a8587b1e..7dd7f94ae5 100644 --- a/Marlin/src/pins/esp32/pins_FYSETC_E4.h +++ b/Marlin/src/pins/esp32/pins_FYSETC_E4.h @@ -27,9 +27,9 @@ * Supports 4 stepper drivers, heated bed, single hotend. */ -#ifndef ARDUINO_ARCH_ESP32 - #error "Oops! Select an ESP32 board in 'Tools > Board.'" -#elif EXTRUDERS > 1 || E_STEPPERS > 1 +#include "env_validate.h" + +#if EXTRUDERS > 1 || E_STEPPERS > 1 #error "FYSETC E4 only supports one E Stepper. Comment out this line to continue." #elif HOTENDS > 1 #error "FYSETC E4 only supports one hotend / E-stepper. Comment out this line to continue." diff --git a/Marlin/src/pins/esp32/pins_MRR_ESPA.h b/Marlin/src/pins/esp32/pins_MRR_ESPA.h index fe67f75372..38f43b53d3 100644 --- a/Marlin/src/pins/esp32/pins_MRR_ESPA.h +++ b/Marlin/src/pins/esp32/pins_MRR_ESPA.h @@ -27,9 +27,9 @@ * Supports 4 stepper drivers, heated bed, single hotend. */ -#if NOT_TARGET(ARDUINO_ARCH_ESP32) - #error "Oops! Select an ESP32 board in 'Tools > Board.'" -#elif EXTRUDERS > 1 || E_STEPPERS > 1 +#include "env_validate.h" + +#if EXTRUDERS > 1 || E_STEPPERS > 1 #error "MRR ESPA only supports one E Stepper. Comment out this line to continue." #elif HOTENDS > 1 #error "MRR ESPA only supports one hotend / E-stepper. Comment out this line to continue." diff --git a/Marlin/src/pins/esp32/pins_MRR_ESPE.h b/Marlin/src/pins/esp32/pins_MRR_ESPE.h index 3f9a6a0af3..f156efd2e8 100644 --- a/Marlin/src/pins/esp32/pins_MRR_ESPE.h +++ b/Marlin/src/pins/esp32/pins_MRR_ESPE.h @@ -28,9 +28,9 @@ * single hotend, and LCD controller. */ -#if NOT_TARGET(ARDUINO_ARCH_ESP32) - #error "Oops! Select an ESP32 board in 'Tools > Board.'" -#elif EXTRUDERS > 2 || E_STEPPERS > 2 +#include "env_validate.h" + +#if EXTRUDERS > 2 || E_STEPPERS > 2 #error "MRR ESPE only supports two E Steppers. Comment out this line to continue." #elif HOTENDS > 1 #error "MRR ESPE only supports one hotend / E-stepper. Comment out this line to continue." diff --git a/Marlin/src/pins/lpc1768/env_validate.h b/Marlin/src/pins/lpc1768/env_validate.h new file mode 100644 index 0000000000..adb3ea938d --- /dev/null +++ b/Marlin/src/pins/lpc1768/env_validate.h @@ -0,0 +1,30 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#if ENABLED(REQUIRE_LPC1769) && NOT_TARGET(MCU_LPC1769) + #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." +#elif DISABLED(REQUIRE_LPC1769) && NOT_TARGET(MCU_LPC1768) + #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." +#endif + +#undef REQUIRE_LPC1769 diff --git a/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h b/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h index 70682ad151..0760eee0ab 100644 --- a/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h +++ b/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h @@ -25,9 +25,7 @@ * AZSMZ MINI pin assignments */ -#if NOT_TARGET(MCU_LPC1768) - #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "AZSMZ MINI" diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h index 5ac119f398..10a610ff95 100644 --- a/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h +++ b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h @@ -29,9 +29,7 @@ * BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed) */ -#if NOT_TARGET(MCU_LPC1768) - #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." -#endif +#include "env_validate.h" #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "BIQU Thunder B300 V1.0" diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h index 3b2137b400..f94381e13a 100644 --- a/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h +++ b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h @@ -29,9 +29,7 @@ * BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed) */ -#if NOT_TARGET(MCU_LPC1768) - #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "BIQU BQ111-A4" diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h index c7555a779d..c555ef7863 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h @@ -21,14 +21,12 @@ */ #pragma once +#include "env_validate.h" + #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "BTT SKR V1.4" #endif -#ifndef BOARD_CUSTOM_BUILD_FLAGS - #define BOARD_CUSTOM_BUILD_FLAGS -DLPC_PINCFG_UART3_P4_28 -#endif - // // SD Connection // diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h index 82799c1cd0..98e4f8ee26 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h @@ -21,13 +21,7 @@ */ #pragma once -#if ENABLED(SKR_HAS_LPC1769) - #if NOT_TARGET(MCU_LPC1769) - #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." - #endif -#elif NOT_TARGET(MCU_LPC1768) - #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." -#endif +#include "env_validate.h" // If you have the Big tree tech driver expansion module, enable HAS_BTT_EXP_MOT // https://github.com/bigtreetech/BTT-Expansion-module/tree/master/BTT%20EXP-MOT diff --git a/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h b/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h index 1970c0c479..0df8b10292 100644 --- a/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h +++ b/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h @@ -21,9 +21,7 @@ */ #pragma once -#if NOT_TARGET(MCU_LPC1768) - #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "GMARSH X6 REV1" diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h index fbddc66e7c..71d7ad3037 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h @@ -25,11 +25,7 @@ * MKS SBASE pin assignments */ -#if defined(MKS_HAS_LPC1769) && NOT_TARGET(MCU_LPC1769) - #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." -#elif !defined(MKS_HAS_LPC1769) && NOT_TARGET(MCU_LPC1768) - #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." -#endif +#include "env_validate.h" #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "MKS SBASE" diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h index b919ecad85..40fac4e7fa 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h @@ -25,9 +25,7 @@ * MKS SGEN-L pin assignments */ -#if NOT_TARGET(MCU_LPC1768) - #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "MKS SGen-L" #define BOARD_WEBSITE_URL "github.com/makerbase-mks/MKS-SGEN_L" diff --git a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h index 65840308ca..83fcf36e4e 100644 --- a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h +++ b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h @@ -35,9 +35,7 @@ // Numbers in parentheses () are the corresponding mega2560 pin numbers -#if NOT_TARGET(MCU_LPC1768) - #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Re-ARM RAMPS 1.4" diff --git a/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h b/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h index 700e79de9c..29fe3b528c 100644 --- a/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h +++ b/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h @@ -25,9 +25,7 @@ * Selena Compact pin assignments */ -#if NOT_TARGET(MCU_LPC1768) - #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Selena Compact" #define BOARD_WEBSITE_URL "github.com/Ales2-k/Selena" diff --git a/Marlin/src/pins/lpc1769/env_validate.h b/Marlin/src/pins/lpc1769/env_validate.h new file mode 100644 index 0000000000..2e2b63d520 --- /dev/null +++ b/Marlin/src/pins/lpc1769/env_validate.h @@ -0,0 +1,26 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#if NOT_TARGET(MCU_LPC1769) + #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." +#endif diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h index adf9085262..7ce78ad283 100644 --- a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h +++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h @@ -25,9 +25,7 @@ * Azteeg X5 GT pin assignments */ -#if NOT_TARGET(MCU_LPC1769) - #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Azteeg X5 GT" #define BOARD_WEBSITE_URL "tinyurl.com/yx8tdqa3" diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h index fdd64878fb..80a91d2cbc 100644 --- a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h +++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h @@ -24,10 +24,7 @@ /** * Azteeg X5 MINI pin assignments */ - -#if NOT_TARGET(MCU_LPC1769) - #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." -#endif +#include "env_validate.h" #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "Azteeg X5 MINI" diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI_WIFI.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI_WIFI.h index 99ff0fd25a..086bacbac0 100644 --- a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI_WIFI.h +++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI_WIFI.h @@ -22,12 +22,10 @@ #pragma once /** - * Azteeg X5 MINI pin assignments + * Azteeg X5 MINI WIFI pin assignments */ -#if NOT_TARGET(MCU_LPC1769) - #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Azteeg X5 MINI WIFI" diff --git a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h index 7c63ba20be..2e1e02f991 100644 --- a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h +++ b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h @@ -21,6 +21,8 @@ */ #pragma once +#include "env_validate.h" + #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "BTT SKR E3 Turbo" #endif diff --git a/Marlin/src/pins/lpc1769/pins_BTT_SKR_V1_4_TURBO.h b/Marlin/src/pins/lpc1769/pins_BTT_SKR_V1_4_TURBO.h index a751286e3a..5af1dfec3f 100644 --- a/Marlin/src/pins/lpc1769/pins_BTT_SKR_V1_4_TURBO.h +++ b/Marlin/src/pins/lpc1769/pins_BTT_SKR_V1_4_TURBO.h @@ -22,9 +22,9 @@ #pragma once #define BOARD_INFO_NAME "BTT SKR V1.4 TURBO" -#define SKR_HAS_LPC1769 // // Include SKR 1.4 pins // +#define REQUIRE_LPC1769 #include "../lpc1768/pins_BTT_SKR_V1_4.h" diff --git a/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h index d66ffbe4e5..237dfaec36 100644 --- a/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h +++ b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h @@ -25,9 +25,7 @@ * Cohesion3D Mini pin assignments */ -#if NOT_TARGET(MCU_LPC1769) - #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Cohesion3D Mini" diff --git a/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h b/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h index edf13cee29..57b4521453 100644 --- a/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h +++ b/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h @@ -25,9 +25,7 @@ * Cohesion3D ReMix pin assignments */ -#if NOT_TARGET(MCU_LPC1769) - #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Cohesion3D ReMix" diff --git a/Marlin/src/pins/lpc1769/pins_FLY_CDY.h b/Marlin/src/pins/lpc1769/pins_FLY_CDY.h index 3982d76a01..b90443403c 100644 --- a/Marlin/src/pins/lpc1769/pins_FLY_CDY.h +++ b/Marlin/src/pins/lpc1769/pins_FLY_CDY.h @@ -21,9 +21,7 @@ */ #pragma once -#if NOT_TARGET(MCU_LPC1769) - #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "FLY-CDY" #define BOARD_WEBSITE_URL "github.com/FLYmaker/FLY-CDY" diff --git a/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h b/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h index d67549997b..ddfee63cd0 100644 --- a/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h +++ b/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h @@ -28,14 +28,10 @@ * https://github.com/makerbase-mks/MKS-SGen/blob/master/Hardware/MKS%20SGEN%20V1.0_001/MKS%20SGEN%20V1.0_001%20PIN.pdf */ -#if NOT_TARGET(MCU_LPC1769) - #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." -#endif - #define BOARD_INFO_NAME "MKS SGen" #define BOARD_WEBSITE_URL "github.com/makerbase-mks/MKS-SGEN" -#define MKS_HAS_LPC1769 +#define REQUIRE_LPC1769 #include "../lpc1768/pins_MKS_SBASE.h" #if HAS_TMC_UART diff --git a/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h b/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h index abf5be3c89..a616079403 100644 --- a/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h +++ b/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h @@ -25,9 +25,7 @@ * MKS SGen pin assignments */ -#if NOT_TARGET(MCU_LPC1769) - #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "MKS SGEN_L V2" #define BOARD_WEBSITE_URL "github.com/makerbase-mks" diff --git a/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h index c5ce3f8795..f7bc9602d7 100644 --- a/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h +++ b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h @@ -25,9 +25,7 @@ * Smoothieboard pin assignments */ -#if NOT_TARGET(MCU_LPC1769) - #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Smoothieboard" #define BOARD_WEBSITE_URL "smoothieware.org/smoothieboard" diff --git a/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h index d4f3e5bc21..4d725bc7d1 100644 --- a/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h +++ b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h @@ -25,9 +25,7 @@ * TH3D EZBoard pin assignments */ -#if NOT_TARGET(MCU_LPC1769) - #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "TH3D EZBoard" #define BOARD_WEBSITE_URL "th3dstudio.com" diff --git a/Marlin/src/pins/mega/env_validate.h b/Marlin/src/pins/mega/env_validate.h new file mode 100644 index 0000000000..fe4a39a612 --- /dev/null +++ b/Marlin/src/pins/mega/env_validate.h @@ -0,0 +1,30 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#if ENABLED(ALLOW_MEGA1280) && NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560 or 1280' in 'Tools > Board.'" +#elif NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#undef ALLOW_MEGA1280 diff --git a/Marlin/src/pins/mega/pins_CHEAPTRONIC.h b/Marlin/src/pins/mega/pins_CHEAPTRONIC.h index 98427d9e59..8bcb263bc1 100644 --- a/Marlin/src/pins/mega/pins_CHEAPTRONIC.h +++ b/Marlin/src/pins/mega/pins_CHEAPTRONIC.h @@ -25,9 +25,7 @@ * Cheaptronic v1.0 pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Cheaptronic v1.0" // diff --git a/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h b/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h index 3f18bc8bbe..01438975b9 100644 --- a/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h +++ b/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h @@ -27,9 +27,7 @@ * www.reprapobchod.cz */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Cheaptronic v2.0" diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_11.h b/Marlin/src/pins/mega/pins_CNCONTROLS_11.h index f80e6144ce..6f9e5e8e6c 100644 --- a/Marlin/src/pins/mega/pins_CNCONTROLS_11.h +++ b/Marlin/src/pins/mega/pins_CNCONTROLS_11.h @@ -25,9 +25,8 @@ * CartesioV11 pin assignments */ -#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#define ALLOW_MEGA1280 +#include "env_validate.h" #define BOARD_INFO_NAME "CN Controls V11" diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_12.h b/Marlin/src/pins/mega/pins_CNCONTROLS_12.h index 540f5c29f5..f1200e0901 100644 --- a/Marlin/src/pins/mega/pins_CNCONTROLS_12.h +++ b/Marlin/src/pins/mega/pins_CNCONTROLS_12.h @@ -25,9 +25,8 @@ * CartesioV12 pin assignments */ -#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#define ALLOW_MEGA1280 +#include "env_validate.h" #define BOARD_INFO_NAME "CN Controls V12" diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_15.h b/Marlin/src/pins/mega/pins_CNCONTROLS_15.h index 8bafbdf000..6de3b7172e 100644 --- a/Marlin/src/pins/mega/pins_CNCONTROLS_15.h +++ b/Marlin/src/pins/mega/pins_CNCONTROLS_15.h @@ -25,9 +25,8 @@ * CNControls V15 for HMS434 pin assignments */ -#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#define ALLOW_MEGA1280 +#include "env_validate.h" #define BOARD_INFO_NAME "CN Controls V15" diff --git a/Marlin/src/pins/mega/pins_EINSTART-S.h b/Marlin/src/pins/mega/pins_EINSTART-S.h index 40d65c353e..d42efe7361 100644 --- a/Marlin/src/pins/mega/pins_EINSTART-S.h +++ b/Marlin/src/pins/mega/pins_EINSTART-S.h @@ -26,9 +26,8 @@ * PCB Silkscreen: 3DPrinterCon_v3.5 */ -#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#define ALLOW_MEGA1280 +#include "env_validate.h" #define BOARD_INFO_NAME "Einstart-S" diff --git a/Marlin/src/pins/mega/pins_ELEFU_3.h b/Marlin/src/pins/mega/pins_ELEFU_3.h index af93c408a2..f5e146cff9 100644 --- a/Marlin/src/pins/mega/pins_ELEFU_3.h +++ b/Marlin/src/pins/mega/pins_ELEFU_3.h @@ -25,9 +25,7 @@ * Elefu RA Board Pin Assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Elefu Ra v3" diff --git a/Marlin/src/pins/mega/pins_GT2560_REV_A.h b/Marlin/src/pins/mega/pins_GT2560_REV_A.h index dcd829f7a7..2fb43a299f 100644 --- a/Marlin/src/pins/mega/pins_GT2560_REV_A.h +++ b/Marlin/src/pins/mega/pins_GT2560_REV_A.h @@ -27,9 +27,8 @@ * Richard Smith */ -#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#define ALLOW_MEGA1280 +#include "env_validate.h" #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "GT2560 Rev.A" diff --git a/Marlin/src/pins/mega/pins_GT2560_V3.h b/Marlin/src/pins/mega/pins_GT2560_V3.h index 66b2804ff6..65642464d9 100644 --- a/Marlin/src/pins/mega/pins_GT2560_V3.h +++ b/Marlin/src/pins/mega/pins_GT2560_V3.h @@ -25,9 +25,8 @@ * Geeetech GT2560 RevB + GT2560 3.0/3.1 + GT2560 4.0/4.1 pin assignments */ -#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#define ALLOW_MEGA1280 +#include "env_validate.h" #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "GT2560 RevB/3.x/4.x" diff --git a/Marlin/src/pins/mega/pins_HJC2560C_REV2.h b/Marlin/src/pins/mega/pins_HJC2560C_REV2.h index dc4b78d9c1..27ec998891 100644 --- a/Marlin/src/pins/mega/pins_HJC2560C_REV2.h +++ b/Marlin/src/pins/mega/pins_HJC2560C_REV2.h @@ -25,9 +25,7 @@ * Geeetech HJC2560-C Rev 2.x board pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define DEFAULT_MACHINE_NAME "ADIMLab Gantry v2" #define BOARD_INFO_NAME "HJC2560-C" diff --git a/Marlin/src/pins/mega/pins_INTAMSYS40.h b/Marlin/src/pins/mega/pins_INTAMSYS40.h index be5f461dda..2e2a9b85db 100644 --- a/Marlin/src/pins/mega/pins_INTAMSYS40.h +++ b/Marlin/src/pins/mega/pins_INTAMSYS40.h @@ -27,9 +27,7 @@ * 2208 version exists and may or may not work */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Intamsys 4.0" diff --git a/Marlin/src/pins/mega/pins_LEAPFROG.h b/Marlin/src/pins/mega/pins_LEAPFROG.h index 9e6802b24b..4700fd6729 100644 --- a/Marlin/src/pins/mega/pins_LEAPFROG.h +++ b/Marlin/src/pins/mega/pins_LEAPFROG.h @@ -25,9 +25,8 @@ * Leapfrog Driver board pin assignments */ -#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Select 'Mega 1280' or 'Mega 2560' in 'Tools > Board.'" -#endif +#define ALLOW_MEGA1280 +#include "env_validate.h" #define BOARD_INFO_NAME "Leapfrog" diff --git a/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h b/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h index 9c316aa759..af5cfd6a2e 100644 --- a/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h +++ b/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h @@ -29,9 +29,7 @@ * printer models. As such this file is currently specific to the Xeed. */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Mega 2560' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Leapfrog Xeed 2015" diff --git a/Marlin/src/pins/mega/pins_MEGACONTROLLER.h b/Marlin/src/pins/mega/pins_MEGACONTROLLER.h index 938ad82eff..69c60b29ec 100644 --- a/Marlin/src/pins/mega/pins_MEGACONTROLLER.h +++ b/Marlin/src/pins/mega/pins_MEGACONTROLLER.h @@ -25,12 +25,12 @@ * Mega controller pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#elif HOTENDS > 2 || E_STEPPERS > 2 +#if HOTENDS > 2 || E_STEPPERS > 2 #error "Mega Controller supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif +#include "env_validate.h" + #define BOARD_INFO_NAME "Mega Controller" // diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS.h b/Marlin/src/pins/mega/pins_MEGATRONICS.h index f813366a14..0308175b2a 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS.h @@ -25,9 +25,7 @@ * MegaTronics pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Megatronics" // diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h index ef4605edd4..e527035910 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h @@ -25,9 +25,7 @@ * MegaTronics v2.0 pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Megatronics v2.0" // diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS_3.h b/Marlin/src/pins/mega/pins_MEGATRONICS_3.h index 9f85d46a54..5dea438d70 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS_3.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS_3.h @@ -25,9 +25,7 @@ * MegaTronics v3.0 / v3.1 / v3.2 pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#include "env_validate.h" #if MB(MEGATRONICS_32) #define BOARD_INFO_NAME "Megatronics v3.2" diff --git a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h index b260a27867..2531f10a7a 100644 --- a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h +++ b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h @@ -37,9 +37,8 @@ * number (B5) agrees with the schematic but B5 is assigned to logical pin 11. */ -#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Select 'Mega 1280' or 'Mega 2560' in 'Tools > Board.'" -#endif +#define ALLOW_MEGA1280 +#include "env_validate.h" #define BOARD_INFO_NAME "Mightyboard" #define DEFAULT_MACHINE_NAME "MB Replicator" diff --git a/Marlin/src/pins/mega/pins_OVERLORD.h b/Marlin/src/pins/mega/pins_OVERLORD.h index 18bb1f27bf..161820b67a 100644 --- a/Marlin/src/pins/mega/pins_OVERLORD.h +++ b/Marlin/src/pins/mega/pins_OVERLORD.h @@ -25,12 +25,12 @@ * Dreammaker Overlord v1.1 pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#elif HOTENDS > 2 || E_STEPPERS > 2 +#if HOTENDS > 2 || E_STEPPERS > 2 #error "Overlord Controller supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif +#include "env_validate.h" + #define BOARD_INFO_NAME "OVERLORD" #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME diff --git a/Marlin/src/pins/mega/pins_PICA.h b/Marlin/src/pins/mega/pins_PICA.h index ff4d3e834d..81f6319377 100644 --- a/Marlin/src/pins/mega/pins_PICA.h +++ b/Marlin/src/pins/mega/pins_PICA.h @@ -29,6 +29,8 @@ * Applies to PICA, PICA_REVB */ +#include "env_validate.h" + #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "PICA" #endif @@ -42,10 +44,6 @@ AD12 = 66; AD13 = 67; AD14 = 68; AD15 = 69; */ -#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." -#endif - // // Servos // diff --git a/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h b/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h index 715e823393..503dd9ec81 100644 --- a/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h +++ b/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h @@ -25,9 +25,7 @@ * Wanhao 0ne+ pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Wanhao i3 Mini 0ne+" #define DEFAULT_MACHINE_NAME "i3 Mini" diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index b8cf695fb5..55240021fa 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -378,7 +378,7 @@ #elif MB(BTT_SKR_V1_3) #include "lpc1768/pins_BTT_SKR_V1_3.h" // LPC1768 env:LPC1768 #elif MB(BTT_SKR_V1_4) - #include "lpc1768/pins_BTT_SKR_V1_4.h" // LPC1768 env:LPC1768 + #include "lpc1768/pins_BTT_SKR_V1_4.h" // LPC1768 env:LPC1768_btt_skr_v1_4 // // LPC1769 ARM Cortex M3 diff --git a/Marlin/src/pins/pinsDebug.h b/Marlin/src/pins/pinsDebug.h index e2e56081b7..72e31b7b25 100644 --- a/Marlin/src/pins/pinsDebug.h +++ b/Marlin/src/pins/pinsDebug.h @@ -41,7 +41,7 @@ #define REPORT_NAME_ANALOG(COUNTER, NAME) _ADD_PIN(#NAME, COUNTER) #include "pinsDebug_list.h" -#line 46 +#line 45 // manually add pins that have names that are macros which don't play well with these macros #if ANY(AVR_ATmega2560_FAMILY, AVR_ATmega1284_FAMILY, ARDUINO_ARCH_SAM, TARGET_LPC1768) @@ -227,7 +227,7 @@ const PinInfo pin_array[] PROGMEM = { #endif #include "pinsDebug_list.h" - #line 172 + #line 231 }; diff --git a/Marlin/src/pins/rambo/env_validate.h b/Marlin/src/pins/rambo/env_validate.h new file mode 100644 index 0000000000..84cf8392cd --- /dev/null +++ b/Marlin/src/pins/rambo/env_validate.h @@ -0,0 +1,26 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino Mega 2560 or Rambo' in 'Tools > Board.'" +#endif diff --git a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h index 2ca2cc9c8d..7b05d454af 100644 --- a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h +++ b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h @@ -25,9 +25,7 @@ * Einsy-Rambo pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino Mega 2560 or Rambo' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Einsy Rambo" diff --git a/Marlin/src/pins/rambo/pins_EINSY_RETRO.h b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h index a6a4b65e05..ee537495ea 100644 --- a/Marlin/src/pins/rambo/pins_EINSY_RETRO.h +++ b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h @@ -25,9 +25,7 @@ * Einsy-Retro pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino Mega 2560 or Rambo' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Einsy Retro" diff --git a/Marlin/src/pins/rambo/pins_MINIRAMBO.h b/Marlin/src/pins/rambo/pins_MINIRAMBO.h index 4dcf35827c..ec44cc3b36 100644 --- a/Marlin/src/pins/rambo/pins_MINIRAMBO.h +++ b/Marlin/src/pins/rambo/pins_MINIRAMBO.h @@ -25,9 +25,7 @@ * Mini-RAMBo pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'RAMBo' in 'Tools > Board' or the Mega2560 environment in PlatformIO." -#endif +#include "env_validate.h" #if MB(MINIRAMBO_10A) #define BOARD_INFO_NAME "Mini RAMBo 1.0a" diff --git a/Marlin/src/pins/rambo/pins_RAMBO.h b/Marlin/src/pins/rambo/pins_RAMBO.h index 65fc4b5af8..5d6f9c1fd0 100644 --- a/Marlin/src/pins/rambo/pins_RAMBO.h +++ b/Marlin/src/pins/rambo/pins_RAMBO.h @@ -41,9 +41,7 @@ * Rambo pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#include "env_validate.h" #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "Rambo" diff --git a/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h b/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h index 5680b00df6..c2a691a3b7 100644 --- a/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h +++ b/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h @@ -25,9 +25,7 @@ * Rambo pin assignments MODIFIED FOR Scoovo X9H ************************************************/ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#include "env_target.h" #define BOARD_INFO_NAME "Scoovo X9H" diff --git a/Marlin/src/pins/ramps/env_validate.h b/Marlin/src/pins/ramps/env_validate.h new file mode 100644 index 0000000000..6006a78f01 --- /dev/null +++ b/Marlin/src/pins/ramps/env_validate.h @@ -0,0 +1,35 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#if ENABLED(ALLOW_SAM3X8E) + #if NOT_TARGET(__SAM3X8E__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino Due' or 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" + #endif +#elif ENABLED(REQUIRE_MEGA2560) && NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#elif DISABLED(REQUIRE_MEGA2560) && NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560 or 1280' in 'Tools > Board.'" +#endif + +#undef ALLOW_SAM3X8E +#undef REQUIRE_MEGA2560 diff --git a/Marlin/src/pins/ramps/pins_AZTEEG_X3.h b/Marlin/src/pins/ramps/pins_AZTEEG_X3.h index 6ddd2a5165..07af61e693 100644 --- a/Marlin/src/pins/ramps/pins_AZTEEG_X3.h +++ b/Marlin/src/pins/ramps/pins_AZTEEG_X3.h @@ -25,9 +25,10 @@ * AZTEEG_X3 Arduino Mega with RAMPS v1.4 pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#elif HOTENDS > 2 || E_STEPPERS > 2 +#define REQUIRE_MEGA2560 +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 #error "Azteeg X3 supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h b/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h index 9ba6a0c1ac..c2896146e6 100644 --- a/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h +++ b/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h @@ -25,9 +25,10 @@ * AZTEEG_X3_PRO (Arduino Mega) pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#elif HOTENDS > 5 || E_STEPPERS > 5 +#define REQUIRE_MEGA2560 +#include "env_validate.h" + +#if HOTENDS > 5 || E_STEPPERS > 5 #error "Azteeg X3 Pro supports up to 5 hotends / E-steppers. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h b/Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h index f120e9c44f..99cf484de7 100644 --- a/Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h +++ b/Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h @@ -25,9 +25,8 @@ * bq ZUM Mega 3D board definition */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#define REQUIRE_MEGA2560 +#include "env_validate.h" #define BOARD_INFO_NAME "ZUM Mega 3D" diff --git a/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h b/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h index 93ec3d6070..1a4b83f02d 100644 --- a/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h +++ b/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h @@ -25,9 +25,8 @@ * Wanhao Duplicator i3 Plus pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#define REQUIRE_MEGA2560 +#include "env_validate.h" #define BOARD_INFO_NAME "Duplicator i3 Plus" diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h index 5b724787e9..383501caaa 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h @@ -25,9 +25,10 @@ * Formbot Raptor pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#elif HOTENDS > 3 || E_STEPPERS > 3 +#define REQUIRE_MEGA2560 +#include "env_validate.h" + +#if HOTENDS > 3 || E_STEPPERS > 3 #error "Formbot supports up to 3 hotends / E-steppers. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h b/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h index 81b6ea16d7..ac0b7428f4 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h @@ -25,9 +25,10 @@ * Formbot pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#elif HOTENDS > 2 || E_STEPPERS > 2 +#define REQUIRE_MEGA2560 +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 #error "Formbot supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h b/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h index a97b0d2d12..76a9fbe628 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h @@ -25,9 +25,10 @@ * Formbot pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#elif HOTENDS > 2 || E_STEPPERS > 2 +#define REQUIRE_MEGA2560 +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 #error "Formbot supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/ramps/pins_K8800.h b/Marlin/src/pins/ramps/pins_K8800.h index 5388c9621d..9bc74943b4 100644 --- a/Marlin/src/pins/ramps/pins_K8800.h +++ b/Marlin/src/pins/ramps/pins_K8800.h @@ -25,9 +25,7 @@ * Velleman K8800 (Vertex) */ -#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "K8800" #define DEFAULT_MACHINE_NAME "Vertex Delta" diff --git a/Marlin/src/pins/ramps/pins_LONGER3D_LKx_PRO.h b/Marlin/src/pins/ramps/pins_LONGER3D_LKx_PRO.h index 6fcb7b94e0..2fd599e619 100644 --- a/Marlin/src/pins/ramps/pins_LONGER3D_LKx_PRO.h +++ b/Marlin/src/pins/ramps/pins_LONGER3D_LKx_PRO.h @@ -25,9 +25,10 @@ * Longer3D LK1/LK4/LK5 Pro board pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#elif HOTENDS > 1 || E_STEPPERS > 1 +#define REQUIRE_MEGA2560 +#include "env_validate.h" + +#if HOTENDS > 1 || E_STEPPERS > 1 #error "Longer3D LGT KIT V1.0 board only supports one hotend / E-stepper. Comment out this line to continue." #endif @@ -42,9 +43,6 @@ #warning "Serial 3 is originally reserved to Y limit switches. Hardware changes are required to use it." #endif -// Custom flags and defines for the build -//#define BOARD_CUSTOM_BUILD_FLAGS -D__FOO__ - #define BOARD_INFO_NAME "LGT KIT V1.0" // diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h index fe416dfb68..f56a9ec38e 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS.h @@ -45,18 +45,7 @@ * 7 | 11 */ -#ifdef TARGET_LPC1768 - #error "Oops! Set MOTHERBOARD to an LPC1768-based board when building for LPC1768." -#elif defined(__STM32F1__) - #error "Oops! Set MOTHERBOARD to an STM32F1-based board when building for STM32F1." -#endif - -#if NOT_TARGET(IS_RAMPS_SMART, IS_RAMPS_DUO, IS_RAMPS4DUE, TARGET_LPC1768, __AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' (or other appropriate target) in 'Tools > Board.'" -#endif - -// Custom flags and defines for the build -//#define BOARD_CUSTOM_BUILD_FLAGS -D__FOO__ +#include "env_validate.h" #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "RAMPS 1.4" diff --git a/Marlin/src/pins/ramps/pins_RAMPS_OLD.h b/Marlin/src/pins/ramps/pins_RAMPS_OLD.h index 6d2dad2314..a43ee3c6ca 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_OLD.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_OLD.h @@ -25,9 +25,7 @@ * Arduino Mega with RAMPS v1.0, v1.1, v1.2 pin assignments */ -#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "RAMPS <1.2" diff --git a/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h b/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h index 23b1dfa346..43a769b34d 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h @@ -37,9 +37,7 @@ * RAMPS_PLUS_SF (Spindle, Controller Fan) */ -#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "RAMPS 1.4 Plus" diff --git a/Marlin/src/pins/ramps/pins_RAMPS_S_12.h b/Marlin/src/pins/ramps/pins_RAMPS_S_12.h index 1bcf310bc1..62b6e3ff94 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_S_12.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_S_12.h @@ -34,12 +34,7 @@ * Other pins_MYBOARD.h files may override these defaults */ -#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif - -// Custom flags and defines for the build -//#define BOARD_CUSTOM_BUILD_FLAGS -D__FOO__ +#include "env_validate.h" #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "RAMPS S 1.2" diff --git a/Marlin/src/pins/ramps/pins_RUMBA.h b/Marlin/src/pins/ramps/pins_RUMBA.h index 4af49d9164..942afafd7a 100644 --- a/Marlin/src/pins/ramps/pins_RUMBA.h +++ b/Marlin/src/pins/ramps/pins_RUMBA.h @@ -25,9 +25,10 @@ * RUMBA pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#elif HOTENDS > 3 || E_STEPPERS > 3 +#define REQUIRE_MEGA2560 +#include "env_validate.h" + +#if HOTENDS > 3 || E_STEPPERS > 3 #error "RUMBA supports up to 3 hotends / E-steppers. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h b/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h index 84e7e31126..53e419af00 100644 --- a/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h +++ b/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h @@ -25,9 +25,10 @@ * Tenlog pin assignments */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#elif HOTENDS > 2 || E_STEPPERS > 2 +#define REQUIRE_MEGA2560 +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 #error "Tenlog supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/ramps/pins_TRONXY_V3_1_0.h b/Marlin/src/pins/ramps/pins_TRONXY_V3_1_0.h index f342eff8aa..ffe6d56eb8 100644 --- a/Marlin/src/pins/ramps/pins_TRONXY_V3_1_0.h +++ b/Marlin/src/pins/ramps/pins_TRONXY_V3_1_0.h @@ -25,9 +25,10 @@ * Arduino Mega for Tronxy X5S-2E, etc. */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#elif HOTENDS > 2 || E_STEPPERS > 2 +#define REQUIRE_MEGA2560 +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 #error "TRONXY-V3-1.0 supports only 2 hotends/E-steppers. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/ramps/pins_TT_OSCAR.h b/Marlin/src/pins/ramps/pins_TT_OSCAR.h index ca402553e1..18d0f1770e 100644 --- a/Marlin/src/pins/ramps/pins_TT_OSCAR.h +++ b/Marlin/src/pins/ramps/pins_TT_OSCAR.h @@ -20,9 +20,7 @@ * */ -#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#include "env_validate.h" #if HOTENDS > 5 || E_STEPPERS > 5 #error "TTOSCAR supports up to 5 hotends / E-steppers. Comment out this line to continue." diff --git a/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h b/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h index 211caddba0..128f1974e0 100644 --- a/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h +++ b/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h @@ -33,9 +33,8 @@ * case light */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#define REQUIRE_MEGA2560 +#include "env_validate.h" #define BOARD_INFO_NAME "Ultimaker 2.x" #define DEFAULT_MACHINE_NAME "Ultimaker" diff --git a/Marlin/src/pins/ramps/pins_ULTIMAKER.h b/Marlin/src/pins/ramps/pins_ULTIMAKER.h index 22c7fd95b4..0bc04d962a 100644 --- a/Marlin/src/pins/ramps/pins_ULTIMAKER.h +++ b/Marlin/src/pins/ramps/pins_ULTIMAKER.h @@ -33,9 +33,7 @@ * case light */ -#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Ultimaker" #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME diff --git a/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h b/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h index 37c28ece4c..091356a11f 100644 --- a/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h +++ b/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h @@ -60,9 +60,7 @@ //#define BOARD_REV_1_0 //#define BOARD_REV_1_5 -#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif +#include "env_validate.h" #ifdef BOARD_REV_1_1_TO_1_3 #define BOARD_INFO_NAME "Ultimaker 1.1-1.3" diff --git a/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h b/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h index 096d970871..26ad5fd658 100644 --- a/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h +++ b/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h @@ -25,9 +25,10 @@ * Z-Bolt X Series board – based on Arduino Mega2560 */ -#if NOT_TARGET(__AVR_ATmega2560__) - #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#elif HOTENDS > 4 || E_STEPPERS > 4 +#define REQUIRE_MEGA2560 +#include "env_validate.h" + +#if HOTENDS > 4 || E_STEPPERS > 4 #error "Z-Bolt X Series board supports up to 4 hotends / E-steppers." #endif diff --git a/Marlin/src/pins/sam/env_validate.h b/Marlin/src/pins/sam/env_validate.h new file mode 100644 index 0000000000..09bcd13649 --- /dev/null +++ b/Marlin/src/pins/sam/env_validate.h @@ -0,0 +1,33 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#if BOTH(ALLOW_MEGA1280, ALLOW_MEGA2560) && NOT_TARGET(__SAM3X8E__, __AVR_ATmega1280__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino Due or Mega' in 'Tools > Board.'" +#elif ENABLED(ALLOW_MEGA2560) && NOT_TARGET(__SAM3X8E__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino Due or Mega' in 'Tools > Board.'" +#elif ENABLED(ALLOW_MEGA1280) && NOT_TARGET(__SAM3X8E__, __AVR_ATmega1280__) + #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" +#endif + +#undef ALLOW_MEGA1280 +#undef ALLOW_MEGA2560 diff --git a/Marlin/src/pins/sam/pins_ADSK.h b/Marlin/src/pins/sam/pins_ADSK.h index b0e171cf17..9026ca7771 100644 --- a/Marlin/src/pins/sam/pins_ADSK.h +++ b/Marlin/src/pins/sam/pins_ADSK.h @@ -27,9 +27,9 @@ #define BOARD_INFO_NAME "ADSK" -#if NOT_TARGET(__SAM3X8E__, __AVR_ATmega1280__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino Due or Mega' in 'Tools > Board.'" -#endif +#define ALLOW_MEGA1280 +#define ALLOW_MEGA2560 +#include "env_validate.h" /* CNC shield modifications: FROM THE BOTTOM CUT THE 5V PIN THAT GOES TO ARDUINO!!! diff --git a/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h b/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h index b01d1aafdf..c273edfc6b 100644 --- a/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h +++ b/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h @@ -26,9 +26,7 @@ * https://reprap.org/wiki/Alligator_Board */ -#if NOT_TARGET(__SAM3X8E__) - #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Alligator Board R2" diff --git a/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h b/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h index 5bf31450b7..a63c337880 100644 --- a/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h +++ b/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h @@ -24,9 +24,7 @@ * CNControls V15 for HMS434 with DUE pin assignments */ -#if NOT_TARGET(__SAM3X8E__) - #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "CN Controls V15D" diff --git a/Marlin/src/pins/sam/pins_DUE3DOM.h b/Marlin/src/pins/sam/pins_DUE3DOM.h index 90d6bdc340..4ebece58e4 100644 --- a/Marlin/src/pins/sam/pins_DUE3DOM.h +++ b/Marlin/src/pins/sam/pins_DUE3DOM.h @@ -25,9 +25,7 @@ * DUE3DOM pin assignments */ -#if NOT_TARGET(__SAM3X8E__) - #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "DUE3DOM" diff --git a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h index 5a205423ed..dd8f263676 100644 --- a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h +++ b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h @@ -25,9 +25,7 @@ * DUE3DOM MINI pin assignments */ -#if NOT_TARGET(__SAM3X8E__) - #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "DUE3DOM MINI" diff --git a/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h b/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h index 424d858a85..874950f34b 100644 --- a/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h +++ b/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h @@ -25,9 +25,7 @@ * PRINTRBOARD_G2 */ -#if NOT_TARGET(__SAM3X8E__) - #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" -#endif +#include "env_validate.h" #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "Printrboard G2" diff --git a/Marlin/src/pins/sam/pins_RADDS.h b/Marlin/src/pins/sam/pins_RADDS.h index 7b9c7f1b28..7b0ec5ab68 100644 --- a/Marlin/src/pins/sam/pins_RADDS.h +++ b/Marlin/src/pins/sam/pins_RADDS.h @@ -25,9 +25,7 @@ * RADDS */ -#if NOT_TARGET(__SAM3X8E__) - #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "RADDS" diff --git a/Marlin/src/pins/sam/pins_RAMPS4DUE.h b/Marlin/src/pins/sam/pins_RAMPS4DUE.h index 54548333b5..6d9d06a175 100644 --- a/Marlin/src/pins/sam/pins_RAMPS4DUE.h +++ b/Marlin/src/pins/sam/pins_RAMPS4DUE.h @@ -39,14 +39,9 @@ * A15 | NC */ -#if NOT_TARGET(__SAM3X8E__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino Due' or 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif - +#define ALLOW_SAM3X8E #define BOARD_INFO_NAME "RAMPS4DUE" -#define IS_RAMPS4DUE - // // Temperature Sensors // diff --git a/Marlin/src/pins/sam/pins_RAMPS_DUO.h b/Marlin/src/pins/sam/pins_RAMPS_DUO.h index d2ab5c96b2..b1a6680c50 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_DUO.h +++ b/Marlin/src/pins/sam/pins_RAMPS_DUO.h @@ -43,14 +43,9 @@ * A15 | A11 */ -#if NOT_TARGET(__SAM3X8E__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino Due' or 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" -#endif - #define BOARD_INFO_NAME "RAMPS Duo" -#define IS_RAMPS_DUO - +#define ALLOW_SAM3X8E #include "../ramps/pins_RAMPS.h" // diff --git a/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h index 80e8f0dc7e..e4c53530f7 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h +++ b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h @@ -28,9 +28,7 @@ * Use 4k7 thermistor tables */ -#if NOT_TARGET(__SAM3X8E__) - #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" -#endif +#include "env_validate.h" #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "RAMPS-FD v1" diff --git a/Marlin/src/pins/sam/pins_RAMPS_SMART.h b/Marlin/src/pins/sam/pins_RAMPS_SMART.h index 17dd32399a..3882dfb944 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_SMART.h +++ b/Marlin/src/pins/sam/pins_RAMPS_SMART.h @@ -60,12 +60,8 @@ * (Search the web for "Arduino DUE Board Pinout" to see the correct header.) */ -#if NOT_TARGET(__SAM3X8E__, __AVR_ATmega2560__) - #error "Oops! Select 'Arduino Due' or 'Mega 2560' in 'Tools > Board.'" -#endif - #define BOARD_INFO_NAME "RAMPS-SMART" -#define IS_RAMPS_SMART +#define ALLOW_SAM3X8E #include "../ramps/pins_RAMPS.h" // I2C EEPROM with 4K of space diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_11.h b/Marlin/src/pins/sam/pins_RURAMPS4D_11.h index 6a283401f4..908bbc6b22 100644 --- a/Marlin/src/pins/sam/pins_RURAMPS4D_11.h +++ b/Marlin/src/pins/sam/pins_RURAMPS4D_11.h @@ -32,9 +32,7 @@ * | */ -#if NOT_TARGET(__SAM3X8E__) - #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "RuRAMPS4Due v1.1" diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_13.h b/Marlin/src/pins/sam/pins_RURAMPS4D_13.h index 6ec10f64af..3e73c33acb 100644 --- a/Marlin/src/pins/sam/pins_RURAMPS4D_13.h +++ b/Marlin/src/pins/sam/pins_RURAMPS4D_13.h @@ -32,9 +32,7 @@ * | */ -#if NOT_TARGET(__SAM3X8E__) - #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "RuRAMPS4Due v1.3" diff --git a/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h b/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h index ea096187f7..e567b0f5e1 100644 --- a/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h +++ b/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h @@ -26,9 +26,7 @@ * https://reprapworld.com/documentation/datasheet_ultratronics10_05.pdf */ -#if NOT_TARGET(ARDUINO_ARCH_SAM) - #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Ultratronics v1.0" diff --git a/Marlin/src/pins/sanguino/env_validate.h b/Marlin/src/pins/sanguino/env_validate.h new file mode 100644 index 0000000000..d229b6f102 --- /dev/null +++ b/Marlin/src/pins/sanguino/env_validate.h @@ -0,0 +1,42 @@ + /** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#if ENABLED(ALLOW_MEGA644) + #if NOT_TARGET(__AVR_ATmega644__, __AVR_ATmega644P__, __AVR_ATmega1284P__) + #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644', 'ATmega644P', or 'ATmega1284P' in 'Tools > Processor.'" + #endif +#elif ENABLED(ALLOW_MEGA644P) + #if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega1284P__) + #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644P' or 'ATmega1284P' in 'Tools > Processor.'" + #endif +#elif ENABLED(REQUIRE_MEGA644P) + #if NOT_TARGET(__AVR_ATmega644P__) + #error "Oops! Select 'Sanguino' in 'Tools > Board' and 'ATmega644P' in 'Tools > Processor.'" + #endif +#elif NOT_TARGET(__AVR_ATmega1284P__) + #error "Oops! Select 'Sanguino' in 'Tools > Board' and 'ATmega1284P' in 'Tools > Processor.' (For PlatformIO, use 'melzi' or 'melzi_optiboot.')" +#endif + +#undef ALLOW_MEGA644 +#undef ALLOW_MEGA644P +#undef REQUIRE_MEGA644P diff --git a/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h b/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h index 29905c1089..1343739a11 100644 --- a/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h +++ b/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h @@ -48,9 +48,8 @@ * Once installed select the Sanguino board and then select the CPU. */ -#if NOT_TARGET(__AVR_ATmega644P__) - #error "Oops! Select 'Sanguino' in 'Tools > Board.'" -#endif +#define REQUIRE_MEGA644P +#include "env_validate.h" #define BOARD_INFO_NAME "Gen3 Monolithic" #define DEBUG_PIN 0 diff --git a/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h b/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h index 33fc233f7a..7cab1bd762 100644 --- a/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h +++ b/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h @@ -48,9 +48,8 @@ * Once installed select the SANGUINO board and then select the CPU. */ -#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega1284P__) - #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644P' or 'ATmega1284P' in 'Tools > Processor.'" -#endif +#define ALLOW_MEGA644P +#include "env_validate.h" #define BOARD_INFO_NAME "Gen3+" diff --git a/Marlin/src/pins/sanguino/pins_GEN6.h b/Marlin/src/pins/sanguino/pins_GEN6.h index bfca8e90d9..51e8200b95 100644 --- a/Marlin/src/pins/sanguino/pins_GEN6.h +++ b/Marlin/src/pins/sanguino/pins_GEN6.h @@ -50,9 +50,8 @@ * Once installed select the Sanguino board and then select the CPU. */ -#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega1284P__) - #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644P' or 'ATmega1284P' in 'Tools > Processor.'" -#endif +#define ALLOW_MEGA644P +#include "env_validate.h" #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "Gen6" diff --git a/Marlin/src/pins/sanguino/pins_GEN7_12.h b/Marlin/src/pins/sanguino/pins_GEN7_12.h index 9db7d7214a..0834da78c4 100644 --- a/Marlin/src/pins/sanguino/pins_GEN7_12.h +++ b/Marlin/src/pins/sanguino/pins_GEN7_12.h @@ -50,9 +50,8 @@ * Once installed select the Sanguino board and then select the CPU. */ -#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega644__, __AVR_ATmega1284P__) - #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644', 'ATmega644P', or 'ATmega1284P' in 'Tools > Processor.'" -#endif +#define ALLOW_MEGA644 +#include "env_validate.h" #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "Gen7 v1.1 / 1.2" diff --git a/Marlin/src/pins/sanguino/pins_GEN7_14.h b/Marlin/src/pins/sanguino/pins_GEN7_14.h index 66dba533e9..97bfdd28a7 100644 --- a/Marlin/src/pins/sanguino/pins_GEN7_14.h +++ b/Marlin/src/pins/sanguino/pins_GEN7_14.h @@ -50,9 +50,8 @@ * Once installed select the Sanguino board and then select the CPU. */ -#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega644__, __AVR_ATmega1284P__) - #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644', 'ATmega644P', or 'ATmega1284P' in 'Tools > Processor.'" -#endif +#define ALLOW_MEGA644 +#include "env_validate.h" #define BOARD_INFO_NAME "Gen7 v1.4" diff --git a/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h b/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h index 0c4871fb27..6d7678e6e3 100644 --- a/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h +++ b/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h @@ -53,9 +53,8 @@ * Once installed select the Sanguino board and then select the CPU. */ -#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega644__, __AVR_ATmega1284P__) - #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644', 'ATmega644P', or 'ATmega1284P' in 'Tools > Processor.'" -#endif +#define ALLOW_MEGA644 +#include "env_validate.h" #define BOARD_INFO_NAME "Gen7 Custom" diff --git a/Marlin/src/pins/sanguino/pins_OMCA_A.h b/Marlin/src/pins/sanguino/pins_OMCA_A.h index 7707320519..a3ceb76a0d 100644 --- a/Marlin/src/pins/sanguino/pins_OMCA_A.h +++ b/Marlin/src/pins/sanguino/pins_OMCA_A.h @@ -74,7 +74,7 @@ */ #if NOT_TARGET(__AVR_ATmega644__) - #error "Oops! Select 'Sanguino' in 'Tools > Board' and ATmega644 in 'Tools > Processor.'" + #error "Oops! Select 'Sanguino' in 'Tools > Board' and 'ATmega644' in 'Tools > Processor.'" #endif #define BOARD_INFO_NAME "Alpha OMCA" diff --git a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h index af27159936..d79ad7a3dd 100644 --- a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h +++ b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h @@ -50,9 +50,8 @@ * Once installed select the Sanguino board and then select the CPU. */ -#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega1284P__) - #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644P' or 'ATmega1284P' in 'Tools > Processor.'" -#endif +#define ALLOW_MEGA644P +#include "env_validate.h" #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "Sanguinololu <1.2" diff --git a/Marlin/src/pins/sanguino/pins_SETHI.h b/Marlin/src/pins/sanguino/pins_SETHI.h index dc2133e441..a2240b385b 100644 --- a/Marlin/src/pins/sanguino/pins_SETHI.h +++ b/Marlin/src/pins/sanguino/pins_SETHI.h @@ -49,9 +49,8 @@ * Once installed select the Sanguino board and then select the CPU. */ -#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega644__, __AVR_ATmega1284P__) - #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644', 'ATmega644P', or 'ATmega1284P' in 'Tools > Processor.'" -#endif +#define ALLOW_MEGA644 +#include "env_validate.h" #define BOARD_INFO_NAME "Sethi 3D_1" diff --git a/Marlin/src/pins/sanguino/pins_ZMIB_V2.h b/Marlin/src/pins/sanguino/pins_ZMIB_V2.h index d064d80132..0265ae0a64 100644 --- a/Marlin/src/pins/sanguino/pins_ZMIB_V2.h +++ b/Marlin/src/pins/sanguino/pins_ZMIB_V2.h @@ -21,9 +21,8 @@ */ #pragma once -#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega1284P__) - #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644P' or 'ATmega1284P' in 'Tools > Processor.'" -#endif +#define ALLOW_MEGA644P +#include "env_validate.h" #define BOARD_INFO_NAME "Zonestar ZMIB_V2" #define BOARD_WEBSITE_URL "www.aliexpress.com/item/32957490744.html" diff --git a/Marlin/src/pins/stm32f1/env_validate.h b/Marlin/src/pins/stm32f1/env_validate.h new file mode 100644 index 0000000000..62ccf7edcc --- /dev/null +++ b/Marlin/src/pins/stm32f1/env_validate.h @@ -0,0 +1,26 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif diff --git a/Marlin/src/pins/stm32f1/pins_BEAST.h b/Marlin/src/pins/stm32f1/pins_BEAST.h index bf2cf6463a..05f77f1029 100644 --- a/Marlin/src/pins/stm32f1/pins_BEAST.h +++ b/Marlin/src/pins/stm32f1/pins_BEAST.h @@ -21,9 +21,7 @@ */ #pragma once -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif +#include "env_validate.h" /** * 21017 Victor Perez Marlin for stm32f1 test diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h index 73a18faf05..e76c77e706 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h @@ -28,9 +28,7 @@ #define DEFAULT_MACHINE_NAME "Creality3D" #define BOARD_INFO_NAME "BTT SKR CR-6" -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif +#include "env_validate.h" // // Release PB4 (Z_STEP_PIN) from JTAG NRST role diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D.h b/Marlin/src/pins/stm32f1/pins_CHITU3D.h index bb6f571924..dd6edf9024 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D.h @@ -21,9 +21,7 @@ */ #pragma once -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif +#include "env_validate.h" /** * 2017 Victor Perez Marlin for stm32f1 test diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h index c90ae84acb..d25a1f34f9 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h @@ -21,9 +21,7 @@ */ #pragma once -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif +#include "env_validate.h" /** * 2017 Victor Perez Marlin for stm32f1 test diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h index 96cf36629a..5afa653117 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h @@ -21,9 +21,7 @@ */ #pragma once -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif +#include "env_validate.h" /** * 2017 Victor Perez Marlin for stm32f1 test diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h index 88806bdb18..733e24cfac 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h @@ -24,9 +24,9 @@ * Creality 4.2.x (STM32F103RET6) board pin assignments */ -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#elif HOTENDS > 1 || E_STEPPERS > 1 +#include "env_validate.h" + +#if HOTENDS > 1 || E_STEPPERS > 1 #error "Creality V4 only supports one hotend / E-stepper. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h index 025e68d4da..6585d40d45 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h @@ -24,9 +24,9 @@ * CREALITY 4.2.10 (STM32F103) board pin assignments */ -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#elif HOTENDS > 1 || E_STEPPERS > 1 +#include "env_validate.h" + +#if HOTENDS > 1 || E_STEPPERS > 1 #error "CREALITY supports up to 1 hotends / E-steppers. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h index f2be289530..c73c92080e 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h @@ -24,9 +24,7 @@ * Creality v4.5.2 and v4.5.3 (STM32F103RET6) board pin assignments */ -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif +#include "env_validate.h" #define DEFAULT_MACHINE_NAME "Creality3D" diff --git a/Marlin/src/pins/stm32f1/pins_FLY_MINI.h b/Marlin/src/pins/stm32f1/pins_FLY_MINI.h index 2278d55870..b94ec0c7f3 100644 --- a/Marlin/src/pins/stm32f1/pins_FLY_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_FLY_MINI.h @@ -21,9 +21,7 @@ */ #pragma once -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "FLY_MINI" #define BOARD_WEBSITE_URL "github.com/FLYmaker" diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h index 3919723f37..7ffe67c4f8 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h @@ -21,9 +21,7 @@ */ #pragma once -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "FYSETC AIO II" #define BOARD_WEBSITE_URL "fysetc.com" diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h index c978092ab2..552ad9ac57 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h @@ -21,9 +21,7 @@ */ #pragma once -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif +#include "env_validate.h" #define DEFAULT_MACHINE_NAME "3D Printer" diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h index 65b16755ca..ba35265d10 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h @@ -21,9 +21,7 @@ */ #pragma once -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif +#include "env_validate.h" #include "pins_FYSETC_CHEETAH.h" diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h index f67dc85b40..4edd67a14d 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h @@ -25,9 +25,7 @@ * Geeetech GTM32 Mini board pin assignments */ -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "GTM32 Pro VB" #define DEFAULT_MACHINE_NAME "STM32F103VET6" diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h index 27b0362758..f346c3a9fd 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h @@ -25,9 +25,7 @@ * Geeetech GTM32 Mini A30 board pin assignments */ -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "GTM32 Pro VB" #define DEFAULT_MACHINE_NAME "STM32F103VET6" diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h index d4ab2ff3e5..18156fc0ff 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h @@ -26,9 +26,7 @@ * http://www.geeetech.com/wiki/index.php/File:Hardware_GTM32_PRO_VB.pdf */ -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "GTM32 Pro VB/VD" #define DEFAULT_MACHINE_NAME "STM32F103VET6" diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h index 8e96327816..865de809e2 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h @@ -25,9 +25,7 @@ * Geeetech GTM32 Rev. B board pin assignments */ -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "GTM32 Rev B" #define DEFAULT_MACHINE_NAME "M201" diff --git a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h index 4f02b0e23c..9f08f18bf7 100644 --- a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h +++ b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h @@ -28,9 +28,9 @@ * Pin assignments for 32-bit JGAurora A5S & A1 */ -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#elif HOTENDS > 1 || E_STEPPERS > 1 +#include "env_validate.h" + +#if HOTENDS > 1 || E_STEPPERS > 1 #error "JGAurora A5S A1 only supports one hotend / E-stepper. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h index 3118a521bb..14664bda39 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h @@ -25,9 +25,9 @@ * MKS Robin nano (STM32F130VET6) board pin assignments */ -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#elif HOTENDS > 1 || E_STEPPERS > 1 +#include "env_validate.h" + +#if HOTENDS > 1 || E_STEPPERS > 1 #error "MKS Robin E3P only supports one hotend / E-stepper. Comment out this line to continue." #elif HAS_FSMC_TFT #error "MKS Robin E3P doesn't support FSMC-based TFT displays." diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h index c4a7e9f408..da7bdc79e5 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h @@ -25,9 +25,7 @@ * MKS Robin E3 & E3D (STM32F103RCT6) common board pin assignments */ -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_NO_NATIVE_USB diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h index 13c2d41d57..fad36e8384 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h @@ -21,9 +21,9 @@ */ #pragma once -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#elif HOTENDS > 1 || E_STEPPERS > 1 +#include "env_validate.h" + +#if HOTENDS > 1 || E_STEPPERS > 1 #error "MKS Robin Lite only supports one hotend / E-stepper. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h index f814052fa8..73fefddf8f 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h @@ -25,9 +25,9 @@ * MKS Robin Lite 3 (STM32F103RCT6) board pin assignments */ -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#elif HOTENDS > 2 || E_STEPPERS > 2 +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 #error "MKS Robin Lite3 supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h index b3cfe5b6ba..be23394af7 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h @@ -25,9 +25,9 @@ * MKS Robin mini (STM32F130VET6) board pin assignments */ -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#elif HOTENDS > 1 || E_STEPPERS > 1 +#include "env_validate.h" + +#if HOTENDS > 1 || E_STEPPERS > 1 #error "MKS Robin mini only supports one hotend / E-stepper. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h index 39676bf9d7..10e1633124 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h @@ -25,9 +25,9 @@ * MKS Robin pro (STM32F103ZET6) board pin assignments */ -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#elif HOTENDS > 3 || E_STEPPERS > 3 +#include "env_validate.h" + +#if HOTENDS > 3 || E_STEPPERS > 3 #error "MKS Robin pro supports up to 3 hotends / E-steppers. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/stm32f1/pins_STM32F1R.h b/Marlin/src/pins/stm32f1/pins_STM32F1R.h index d666755c6f..c08b707d7e 100644 --- a/Marlin/src/pins/stm32f1/pins_STM32F1R.h +++ b/Marlin/src/pins/stm32f1/pins_STM32F1R.h @@ -21,9 +21,7 @@ */ #pragma once -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif +#include "env_validate.h" /** * 21017 Victor Perez Marlin for stm32f1 test diff --git a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h index 4f8183caf4..d25ca1bd2e 100644 --- a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h @@ -21,9 +21,7 @@ */ #pragma once -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#endif +#include "env_validate.h" /** * 21017 Victor Perez Marlin for stm32f1 test diff --git a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h index ed70d8d28f..dc603cda54 100644 --- a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h +++ b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h @@ -28,9 +28,9 @@ * https://github.com/MarlinFirmware/Marlin/files/3401484/x5sa-main_board-2.pdf */ -#if NOT_TARGET(__STM32F1__) - #error "Oops! Select an STM32F1 board in 'Tools > Board.'" -#elif HOTENDS > 2 || E_STEPPERS > 2 +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 #error "Trigorilla Pro supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/stm32f4/env_validate.h b/Marlin/src/pins/stm32f4/env_validate.h new file mode 100644 index 0000000000..c01401f06c --- /dev/null +++ b/Marlin/src/pins/stm32f4/env_validate.h @@ -0,0 +1,28 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#if NOT_TARGET(STM32F4) && (DISABLED(ALLOW_STM32DUINO) || NOT_TARGET(STM32F4xx)) + #error "Oops! Select an STM32F4 board in 'Tools > Board.'" +#endif + +#undef ALLOW_STM32DUINO diff --git a/Marlin/src/pins/stm32f4/pins_ANET_ET4.h b/Marlin/src/pins/stm32f4/pins_ANET_ET4.h index 487080f46b..1e1f5251c1 100644 --- a/Marlin/src/pins/stm32f4/pins_ANET_ET4.h +++ b/Marlin/src/pins/stm32f4/pins_ANET_ET4.h @@ -22,9 +22,11 @@ #pragma once -#if NOT_TARGET(STM32F4) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#elif HOTENDS > 1 || E_STEPPERS > 1 +#include "env_validate.h" + +#include "env_validate.h" + +#if HOTENDS > 1 || E_STEPPERS > 1 #error "Anet ET4 only supports one hotend / E-stepper. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/stm32f4/pins_ARMED.h b/Marlin/src/pins/stm32f4/pins_ARMED.h index db57db14d5..a67af089f2 100644 --- a/Marlin/src/pins/stm32f4/pins_ARMED.h +++ b/Marlin/src/pins/stm32f4/pins_ARMED.h @@ -24,9 +24,9 @@ #pragma once -#if NOT_TARGET(STM32F4) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#elif HOTENDS > 2 || E_STEPPERS > 2 +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 #error "Arm'ed supports up to 2 hotends / E-steppers." #endif diff --git a/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h b/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h index c2ad907e04..d8a83bef3a 100644 --- a/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h +++ b/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h @@ -27,9 +27,10 @@ * Shield - https://github.com/jmz52/Hardware */ -#if NOT_TARGET(STM32F4, STM32F4xx) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#elif HOTENDS > 2 || E_STEPPERS > 2 +#define ALLOW_STM32DUINO +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 #error "Black STM32F4VET6 supports up to 2 hotends / E-steppers." #endif diff --git a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h index bc69e1fd21..6029031a63 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h @@ -21,9 +21,9 @@ */ #pragma once -#if NOT_TARGET(STM32F4) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#elif HOTENDS > 1 || E_STEPPERS > 1 +#include "env_validate.h" + +#if HOTENDS > 1 || E_STEPPERS > 1 #error "BIGTREE BTT002 V1.0 only supports one hotend / E-stepper. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h index cd9d60d2f0..6c59f27c5e 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h @@ -21,9 +21,9 @@ */ #pragma once -#if NOT_TARGET(STM32F4) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#elif HOTENDS > 8 || E_STEPPERS > 8 +#include "env_validate.h" + +#if HOTENDS > 8 || E_STEPPERS > 8 #error "BIGTREE GTR V1.0 supports up to 8 hotends / E-steppers." #elif HOTENDS > MAX_E_STEPPERS || E_STEPPERS > MAX_E_STEPPERS #error "Marlin extruder/hotends limit! Increase MAX_E_STEPPERS to continue." diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h index ab7f5126ff..863429f2a2 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h @@ -21,9 +21,7 @@ */ #pragma once -#if NOT_TARGET(STM32F4) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#endif +#include "env_validate.h" // BigTreeTech driver expansion module https://bit.ly/3ptRRoj //#define BTT_MOTOR_EXPANSION diff --git a/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h b/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h index 7965d262c3..34124a9b02 100644 --- a/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h +++ b/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h @@ -21,9 +21,10 @@ */ #pragma once -#if NOT_TARGET(STM32F4, STM32F4xx) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#elif HOTENDS > 6 || E_STEPPERS > 6 +#define ALLOW_STM32DUINO +#include "env_validate.h" + +#if HOTENDS > 6 || E_STEPPERS > 6 #error "FLYF407ZG supports up to 6 hotends / E-steppers." #endif diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h b/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h index ad43765135..ef1c14aae0 100644 --- a/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h +++ b/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h @@ -21,9 +21,7 @@ */ #pragma once -#if NOT_TARGET(STM32F4) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#endif +#include "env_validate.h" #define DEFAULT_MACHINE_NAME "3D Printer" diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h index a280775646..d617087e9d 100644 --- a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h +++ b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h @@ -21,9 +21,9 @@ */ #pragma once -#if NOT_TARGET(STM32F4) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#elif HOTENDS > 3 || E_STEPPERS > 3 +#include "env_validate.h" + +#if HOTENDS > 3 || E_STEPPERS > 3 #error "RUMBA32 supports up to 3 hotends / E-steppers." #endif diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h index bf6df03562..fad8d2059e 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h @@ -18,9 +18,10 @@ */ #pragma once -#if NOT_TARGET(STM32F4, STM32F4xx) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#elif HOTENDS > 2 || E_STEPPERS > 2 +#define ALLOW_STM32DUINO +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 #error "LERDGE K supports up to 2 hotends / E-steppers." #endif diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_S.h b/Marlin/src/pins/stm32f4/pins_LERDGE_S.h index c6cfa98831..105d0d6f60 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_S.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_S.h @@ -18,9 +18,10 @@ */ #pragma once -#if NOT_TARGET(STM32F4, STM32F4xx) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#elif HOTENDS > 2 || E_STEPPERS > 2 +#define ALLOW_STM32DUINO +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 #error "LERDGE S supports up to 2 hotends / E-steppers." #endif diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_X.h b/Marlin/src/pins/stm32f4/pins_LERDGE_X.h index 606d932c57..974392373f 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_X.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_X.h @@ -18,9 +18,10 @@ */ #pragma once -#if NOT_TARGET(STM32F4, STM32F4xx) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#elif HOTENDS > 1 || E_STEPPERS > 1 +#define ALLOW_STM32DUINO +#include "env_validate.h" + +#if HOTENDS > 1 || E_STEPPERS > 1 #error "LERDGE X only supports one hotend / E-stepper. Comment out this line to continue." #endif diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN2.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN2.h index c2f5f324ba..589300f341 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN2.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN2.h @@ -21,9 +21,9 @@ */ #pragma once -#if NOT_TARGET(STM32F4) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#elif HOTENDS > 2 || E_STEPPERS > 2 +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 #error "MKS_ROBIN2 supports up to 2 hotends / E-steppers." #endif diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h index 8308f3998f..f9e85c4919 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h @@ -21,9 +21,10 @@ */ #pragma once -#if NOT_TARGET(STM32F4, STM32F4xx) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#elif HOTENDS > 2 || E_STEPPERS > 2 +#define ALLOW_STM32DUINO +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 #error "MKS Robin Nano V3 supports up to 2 hotends / E-steppers." #elif HAS_FSMC_TFT #error "MKS Robin Nano V3 doesn't support FSMC-based TFT displays." diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h index 5533e35f07..f2ddfc2b52 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h @@ -21,9 +21,10 @@ */ #pragma once -#if NOT_TARGET(STM32F4, STM32F4xx) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#elif HOTENDS > 2 || E_STEPPERS > 2 +#define ALLOW_STM32DUINO +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 #error "MKS Robin Nano V3 supports up to 1 hotends / E-steppers." #endif diff --git a/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h b/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h index 2a0cfa897c..be6e4f8a34 100644 --- a/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h +++ b/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h @@ -25,9 +25,9 @@ * Common pin assignments for all RUMBA32 boards */ -#if NOT_TARGET(STM32F4) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#elif HOTENDS > 3 || E_STEPPERS > 3 +#include "env_validate.h" + +#if HOTENDS > 3 || E_STEPPERS > 3 #error "RUMBA32 boards support up to 3 hotends / E-steppers." #endif diff --git a/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h b/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h index 25679517c2..dc02fd02ea 100644 --- a/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h +++ b/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h @@ -40,9 +40,7 @@ #pragma once -#if NOT_TARGET(STM32F4) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#endif +#include "env_validate.h" #ifndef MACHINE_NAME #define MACHINE_NAME "STEVAL-3DP001V1" diff --git a/Marlin/src/pins/stm32f4/pins_VAKE403D.h b/Marlin/src/pins/stm32f4/pins_VAKE403D.h index 1135af847f..9d122c2642 100644 --- a/Marlin/src/pins/stm32f4/pins_VAKE403D.h +++ b/Marlin/src/pins/stm32f4/pins_VAKE403D.h @@ -21,9 +21,10 @@ */ #pragma once -#if NOT_TARGET(STM32F4, STM32F4xx) - #error "Oops! Select an STM32F4 board in 'Tools > Board.'" -#elif HOTENDS > 2 || E_STEPPERS > 2 +#define ALLOW_STM32DUINO +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 #error "STM32F4 supports up to 2 hotends / E-steppers." #endif diff --git a/Marlin/src/pins/teensy2/env_validate.h b/Marlin/src/pins/teensy2/env_validate.h new file mode 100644 index 0000000000..5f0ea4f3b6 --- /dev/null +++ b/Marlin/src/pins/teensy2/env_validate.h @@ -0,0 +1,28 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#if NOT_TARGET(__AVR_AT90USB1286__) && (DISABLED(ALLOW_AT90USB1286P) || NOT_TARGET(__AVR_AT90USB1286P__)) + #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" +#endif + +#undef ALLOW_AT90USB1286P diff --git a/Marlin/src/pins/teensy2/pins_5DPRINT.h b/Marlin/src/pins/teensy2/pins_5DPRINT.h index 908e12e0ba..6e1f9c0217 100644 --- a/Marlin/src/pins/teensy2/pins_5DPRINT.h +++ b/Marlin/src/pins/teensy2/pins_5DPRINT.h @@ -68,9 +68,7 @@ * https://bitbucket.org/makible/5dprint-d8-controller-board */ -#if NOT_TARGET(__AVR_AT90USB1286__) - #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define DEFAULT_MACHINE_NAME "Makibox" #define BOARD_INFO_NAME "5DPrint D8" diff --git a/Marlin/src/pins/teensy2/pins_BRAINWAVE.h b/Marlin/src/pins/teensy2/pins_BRAINWAVE.h index 97d210a0f8..cdcc249c00 100644 --- a/Marlin/src/pins/teensy2/pins_BRAINWAVE.h +++ b/Marlin/src/pins/teensy2/pins_BRAINWAVE.h @@ -69,7 +69,7 @@ */ #if NOT_TARGET(__AVR_AT90USB646__) - #error "Oops! Select 'AT90USB646_TEENSYPP' in 'Tools > Board.'" + #error "Oops! Select 'Brainwave' in 'Tools > Board.'" #endif #define BOARD_INFO_NAME "Brainwave" diff --git a/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h b/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h index e41fcaab94..319130ef96 100644 --- a/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h +++ b/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h @@ -75,9 +75,7 @@ * 4. The programmer is no longer needed. Remove it. */ -#if NOT_TARGET(__AVR_AT90USB1286__) - #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Brainwave Pro" diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h index 2401c976f1..7b3685d08e 100644 --- a/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h +++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h @@ -62,9 +62,7 @@ * 4. The programmer is no longer needed. Remove it. */ -#if NOT_TARGET(__AVR_AT90USB1286__) - #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Printrboard" diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h index d4f9fc7641..0e6842125e 100644 --- a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h +++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h @@ -63,9 +63,7 @@ * 4. The programmer is no longer needed. Remove it. */ -#if NOT_TARGET(__AVR_AT90USB1286__) - #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" -#endif +#include "env_validate.h" #if !defined(__MARLIN_DEPS__) && !defined(USBCON) #error "USBCON should be defined by the platform for this board." diff --git a/Marlin/src/pins/teensy2/pins_SAV_MKI.h b/Marlin/src/pins/teensy2/pins_SAV_MKI.h index bcc456c16e..cdba535090 100644 --- a/Marlin/src/pins/teensy2/pins_SAV_MKI.h +++ b/Marlin/src/pins/teensy2/pins_SAV_MKI.h @@ -62,9 +62,7 @@ * 4. The programmer is no longer needed. Remove it. */ -#if NOT_TARGET(__AVR_AT90USB1286__) - #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "SAV MkI" #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME diff --git a/Marlin/src/pins/teensy2/pins_TEENSY2.h b/Marlin/src/pins/teensy2/pins_TEENSY2.h index d43e39b09a..efb409bf32 100644 --- a/Marlin/src/pins/teensy2/pins_TEENSY2.h +++ b/Marlin/src/pins/teensy2/pins_TEENSY2.h @@ -107,9 +107,7 @@ * E DIR 35 a7 a3 31 Y DIR */ -#if NOT_TARGET(__AVR_AT90USB1286__) - #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" -#endif +#include "env_validate.h" #define BOARD_INFO_NAME "Teensy++2.0" diff --git a/Marlin/src/pins/teensy2/pins_TEENSYLU.h b/Marlin/src/pins/teensy2/pins_TEENSYLU.h index 54cee137ad..f551d802cf 100644 --- a/Marlin/src/pins/teensy2/pins_TEENSYLU.h +++ b/Marlin/src/pins/teensy2/pins_TEENSYLU.h @@ -72,6 +72,9 @@ * The pin assignments in this file match the silkscreen. */ +#define ALLOW_AT90USB1286P +#include "env_validate.h" + #if NOT_TARGET(__AVR_AT90USB1286__, __AVR_AT90USB1286P__) #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" #endif diff --git a/buildroot/bin/mftest b/buildroot/bin/mftest index 00f7a2e7e0..d769ff8cb8 100755 --- a/buildroot/bin/mftest +++ b/buildroot/bin/mftest @@ -21,7 +21,7 @@ Usage: mftest [-t|--env=] [-n|--num=] [-m|--make] [-y|--build=] OPTIONS -t --env The environment of the test to apply / run. (As named in platformio.ini.) - -n --num The index of the test to run. (In *-tests file order.) + -n --num The index of the test to run. (In file order.) -m --make Use the make / Docker method for the build. -y --build Skip 'Do you want to build this test?' and assume YES. -h --help Print this help. @@ -204,11 +204,10 @@ fi if [[ $TESTENV == '-' ]]; then IND=0 NAMES=() - for FILE in $( ls -1 $TESTPATH/*-tests ) + for FILE in $( ls -1 $TESTPATH/* ) do let IND++ - TNAME=${FILE/-tests/} - TNAME=${TNAME/$TESTPATH\//} + TNAME=${FILE/$TESTPATH\//} NAMES+=($TNAME) (( IND < 10 )) && echo -n " " echo " $IND) $TNAME" @@ -231,7 +230,7 @@ if [[ $TESTENV == '-' ]]; then fi # Get the contents of the test file -OUT=$( cat $TESTPATH/$TESTENV-tests 2>/dev/null ) || { errout "Can't find test '$TESTENV'." ; exit 1 ; } +OUT=$( cat $TESTPATH/$TESTENV 2>/dev/null ) || { errout "Can't find test '$TESTENV'." ; exit 1 ; } # Count up the number of tests TESTCOUNT=$( awk "/$ISEXEC/{a++}END{print a}" <<<"$OUT" ) @@ -297,7 +296,7 @@ echo "$OUT" | { echo -ne "\033[0m" # Make clear it's a TEST -opt_set CUSTOM_MACHINE_NAME "\"$TESTENV-tests ($CHOICE)\"" +opt_set CUSTOM_MACHINE_NAME "\"Test $TESTENV ($CHOICE)\"" # Build the test too? if [[ -z "$BUILD_YES" ]]; then diff --git a/buildroot/tests/run_tests b/buildroot/bin/run_tests similarity index 79% rename from buildroot/tests/run_tests rename to buildroot/bin/run_tests index c4286f4695..26284fa693 100755 --- a/buildroot/tests/run_tests +++ b/buildroot/bin/run_tests @@ -2,8 +2,9 @@ # # run_tests # -export PATH="$PATH:$( cd "$(dirname "${BASH_SOURCE[0]}")" ; pwd -P )" -export PATH="$PATH:./buildroot/bin" +HERE="$( cd "$(dirname "${BASH_SOURCE[0]}")" ; pwd -P )" +TESTS="$HERE/../tests" +export PATH="$HERE:$TESTS:$PATH" # exit on first failure set -e @@ -40,10 +41,9 @@ export -f exec_test printf "Running \033[0;32m$2\033[0m Tests\n" if [[ $2 = "ALL" ]]; then - dir_list=("$(dirname "${BASH_SOURCE[0]}")"/*) - declare -a tests=(${dir_list[@]/*run_tests/}) + tests=("$TESTS"/*) for f in "${tests[@]}"; do - testenv=$(basename $f | cut -d"-" -f1) + testenv=$(basename $f) printf "Running \033[0;32m$f\033[0m Tests\n" exec_test $1 "$testenv --target clean" "Setup Build Environment" if [[ $GIT_RESET_HARD == "true" ]]; then @@ -58,16 +58,16 @@ else # If the test name is 1 or 2 digits, treat it as an index if [[ "$test_name" =~ ^[0-9][0-9]?$ ]] ; then # Find the test name that corresponds to that index - test_name="$(cat buildroot/tests/$2-tests | grep -e '^exec_test' | sed -n "$3p" | sed "s/.*\$1 \$2 \"\([^\"]*\).*/\1/g")" + test_name="$(cat $TESTS/$2 | grep -e '^exec_test' | sed -n "$3p" | sed "s/.*\$1 \$2 \"\([^\"]*\).*/\1/g")" if [[ -z "$test_name" ]] ; then # Fail if none matches - printf "\033[0;31mCould not find test \033[0m#$3\033[0;31m in \033[0mbuildroot/tests/$2-tests\n" + printf "\033[0;31mCould not find test \033[0m#$3\033[0;31m in \033[0mbuildroot/tests/$2\n" exit 1 else printf "\033[0;32mMatching test \033[0m#$3\033[0;32m: '\033[0m$test_name\033[0;32m'\n" fi fi - $2-tests $1 $2 "$test_name" + $TESTS/$2 $1 $2 "$test_name" if [[ $GIT_RESET_HARD == "true" ]]; then git reset --hard HEAD else diff --git a/buildroot/share/PlatformIO/scripts/common-dependencies-post.py b/buildroot/share/PlatformIO/scripts/common-dependencies-post.py deleted file mode 100644 index 2b1b948119..0000000000 --- a/buildroot/share/PlatformIO/scripts/common-dependencies-post.py +++ /dev/null @@ -1,16 +0,0 @@ -# -# common-dependencies-post.py -# Convenience script to add build flags for Marlin Enabled Features -# - -Import("env") -Import("projenv") - -def apply_board_build_flags(): - if not 'BOARD_CUSTOM_BUILD_FLAGS' in env['MARLIN_FEATURES']: - return - projenv.Append(CCFLAGS=env['MARLIN_FEATURES']['BOARD_CUSTOM_BUILD_FLAGS'].split()) - -# We need to add the board build flags in a post script -# so the platform build script doesn't overwrite the custom CCFLAGS -apply_board_build_flags() diff --git a/buildroot/share/PlatformIO/scripts/preflight-checks.py b/buildroot/share/PlatformIO/scripts/preflight-checks.py index 4c8a00e74c..969a82aad2 100644 --- a/buildroot/share/PlatformIO/scripts/preflight-checks.py +++ b/buildroot/share/PlatformIO/scripts/preflight-checks.py @@ -49,8 +49,7 @@ config = env.GetProjectConfig() result = check_envs("env:"+build_env, base_envs, config) if not result: - err = "Error: your selected build environment '%s' is not compatible with MOTHERBOARD=%s in Configuration.h. " \ - "Please use one of compatible build environments for this board: %s" % \ + err = "Error: Build environment '%s' is incompatible with %s. Use one of these: %s" % \ (build_env, motherboard, ",".join([e[4:] for e in base_envs if e.startswith("env:")])) raise SystemExit(err) diff --git a/buildroot/tests/ARMED-tests b/buildroot/tests/ARMED similarity index 100% rename from buildroot/tests/ARMED-tests rename to buildroot/tests/ARMED diff --git a/buildroot/tests/BIGTREE_BTT002-tests b/buildroot/tests/BIGTREE_BTT002 similarity index 100% rename from buildroot/tests/BIGTREE_BTT002-tests rename to buildroot/tests/BIGTREE_BTT002 diff --git a/buildroot/tests/BIGTREE_GTR_V1_0-tests b/buildroot/tests/BIGTREE_GTR_V1_0 similarity index 100% rename from buildroot/tests/BIGTREE_GTR_V1_0-tests rename to buildroot/tests/BIGTREE_GTR_V1_0 diff --git a/buildroot/tests/BIGTREE_GTR_V1_0_usb_flash_drive-tests b/buildroot/tests/BIGTREE_GTR_V1_0_usb_flash_drive similarity index 100% rename from buildroot/tests/BIGTREE_GTR_V1_0_usb_flash_drive-tests rename to buildroot/tests/BIGTREE_GTR_V1_0_usb_flash_drive diff --git a/buildroot/tests/BIGTREE_SKR_PRO-tests b/buildroot/tests/BIGTREE_SKR_PRO similarity index 100% rename from buildroot/tests/BIGTREE_SKR_PRO-tests rename to buildroot/tests/BIGTREE_SKR_PRO diff --git a/buildroot/tests/DUE-tests b/buildroot/tests/DUE similarity index 100% rename from buildroot/tests/DUE-tests rename to buildroot/tests/DUE diff --git a/buildroot/tests/DUE_archim-tests b/buildroot/tests/DUE_archim similarity index 100% rename from buildroot/tests/DUE_archim-tests rename to buildroot/tests/DUE_archim diff --git a/buildroot/tests/FLYF407ZG-tests b/buildroot/tests/FLYF407ZG similarity index 100% rename from buildroot/tests/FLYF407ZG-tests rename to buildroot/tests/FLYF407ZG diff --git a/buildroot/tests/FYSETC_F6-tests b/buildroot/tests/FYSETC_F6 similarity index 100% rename from buildroot/tests/FYSETC_F6-tests rename to buildroot/tests/FYSETC_F6 diff --git a/buildroot/tests/FYSETC_S6-tests b/buildroot/tests/FYSETC_S6 similarity index 100% rename from buildroot/tests/FYSETC_S6-tests rename to buildroot/tests/FYSETC_S6 diff --git a/buildroot/tests/LERDGEX-tests b/buildroot/tests/LERDGEX similarity index 100% rename from buildroot/tests/LERDGEX-tests rename to buildroot/tests/LERDGEX diff --git a/buildroot/tests/LPC1768-tests b/buildroot/tests/LPC1768 similarity index 100% rename from buildroot/tests/LPC1768-tests rename to buildroot/tests/LPC1768 diff --git a/buildroot/tests/LPC1769-tests b/buildroot/tests/LPC1769 similarity index 100% rename from buildroot/tests/LPC1769-tests rename to buildroot/tests/LPC1769 diff --git a/buildroot/tests/NUCLEO_F767ZI-tests b/buildroot/tests/NUCLEO_F767ZI similarity index 100% rename from buildroot/tests/NUCLEO_F767ZI-tests rename to buildroot/tests/NUCLEO_F767ZI diff --git a/buildroot/tests/REMRAM_V1-tests b/buildroot/tests/REMRAM_V1 similarity index 100% rename from buildroot/tests/REMRAM_V1-tests rename to buildroot/tests/REMRAM_V1 diff --git a/buildroot/tests/SAMD51_grandcentral_m4-tests b/buildroot/tests/SAMD51_grandcentral_m4 similarity index 100% rename from buildroot/tests/SAMD51_grandcentral_m4-tests rename to buildroot/tests/SAMD51_grandcentral_m4 diff --git a/buildroot/tests/STM32F070CB_malyan-tests b/buildroot/tests/STM32F070CB_malyan similarity index 100% rename from buildroot/tests/STM32F070CB_malyan-tests rename to buildroot/tests/STM32F070CB_malyan diff --git a/buildroot/tests/STM32F070RB_malyan-tests b/buildroot/tests/STM32F070RB_malyan similarity index 100% rename from buildroot/tests/STM32F070RB_malyan-tests rename to buildroot/tests/STM32F070RB_malyan diff --git a/buildroot/tests/STM32F103CB_malyan-tests b/buildroot/tests/STM32F103CB_malyan similarity index 100% rename from buildroot/tests/STM32F103CB_malyan-tests rename to buildroot/tests/STM32F103CB_malyan diff --git a/buildroot/tests/STM32F103RC_btt-tests b/buildroot/tests/STM32F103RC_btt similarity index 100% rename from buildroot/tests/STM32F103RC_btt-tests rename to buildroot/tests/STM32F103RC_btt diff --git a/buildroot/tests/STM32F103RC_btt_USB-tests b/buildroot/tests/STM32F103RC_btt_USB similarity index 100% rename from buildroot/tests/STM32F103RC_btt_USB-tests rename to buildroot/tests/STM32F103RC_btt_USB diff --git a/buildroot/tests/STM32F103RC_fysetc-tests b/buildroot/tests/STM32F103RC_fysetc similarity index 100% rename from buildroot/tests/STM32F103RC_fysetc-tests rename to buildroot/tests/STM32F103RC_fysetc diff --git a/buildroot/tests/STM32F103RC_meeb-tests b/buildroot/tests/STM32F103RC_meeb similarity index 100% rename from buildroot/tests/STM32F103RC_meeb-tests rename to buildroot/tests/STM32F103RC_meeb diff --git a/buildroot/tests/STM32F103RE-tests b/buildroot/tests/STM32F103RE similarity index 100% rename from buildroot/tests/STM32F103RE-tests rename to buildroot/tests/STM32F103RE diff --git a/buildroot/tests/STM32F103RET6_creality-tests b/buildroot/tests/STM32F103RET6_creality similarity index 100% rename from buildroot/tests/STM32F103RET6_creality-tests rename to buildroot/tests/STM32F103RET6_creality diff --git a/buildroot/tests/STM32F103RE_btt-tests b/buildroot/tests/STM32F103RE_btt similarity index 100% rename from buildroot/tests/STM32F103RE_btt-tests rename to buildroot/tests/STM32F103RE_btt diff --git a/buildroot/tests/STM32F103RE_btt_USB-tests b/buildroot/tests/STM32F103RE_btt_USB similarity index 100% rename from buildroot/tests/STM32F103RE_btt_USB-tests rename to buildroot/tests/STM32F103RE_btt_USB diff --git a/buildroot/tests/STM32F103VE_longer-tests b/buildroot/tests/STM32F103VE_longer similarity index 100% rename from buildroot/tests/STM32F103VE_longer-tests rename to buildroot/tests/STM32F103VE_longer diff --git a/buildroot/tests/STM32F401VE_STEVAL-tests b/buildroot/tests/STM32F401VE_STEVAL similarity index 100% rename from buildroot/tests/STM32F401VE_STEVAL-tests rename to buildroot/tests/STM32F401VE_STEVAL diff --git a/buildroot/tests/STM32F407VE_black-tests b/buildroot/tests/STM32F407VE_black similarity index 100% rename from buildroot/tests/STM32F407VE_black-tests rename to buildroot/tests/STM32F407VE_black diff --git a/buildroot/tests/at90usb1286_cdc-tests b/buildroot/tests/at90usb1286_cdc similarity index 100% rename from buildroot/tests/at90usb1286_cdc-tests rename to buildroot/tests/at90usb1286_cdc diff --git a/buildroot/tests/at90usb1286_dfu-tests b/buildroot/tests/at90usb1286_dfu similarity index 100% rename from buildroot/tests/at90usb1286_dfu-tests rename to buildroot/tests/at90usb1286_dfu diff --git a/buildroot/tests/esp32-tests b/buildroot/tests/esp32 similarity index 100% rename from buildroot/tests/esp32-tests rename to buildroot/tests/esp32 diff --git a/buildroot/tests/jgaurora_a5s_a1-tests b/buildroot/tests/jgaurora_a5s_a1 similarity index 100% rename from buildroot/tests/jgaurora_a5s_a1-tests rename to buildroot/tests/jgaurora_a5s_a1 diff --git a/buildroot/tests/linux_native-tests b/buildroot/tests/linux_native similarity index 100% rename from buildroot/tests/linux_native-tests rename to buildroot/tests/linux_native diff --git a/buildroot/tests/malyan_M300-tests b/buildroot/tests/malyan_M300 similarity index 100% rename from buildroot/tests/malyan_M300-tests rename to buildroot/tests/malyan_M300 diff --git a/buildroot/tests/mega1280-tests b/buildroot/tests/mega1280 similarity index 100% rename from buildroot/tests/mega1280-tests rename to buildroot/tests/mega1280 diff --git a/buildroot/tests/mega2560-tests b/buildroot/tests/mega2560 similarity index 100% rename from buildroot/tests/mega2560-tests rename to buildroot/tests/mega2560 diff --git a/buildroot/tests/mks_robin-tests b/buildroot/tests/mks_robin similarity index 100% rename from buildroot/tests/mks_robin-tests rename to buildroot/tests/mks_robin diff --git a/buildroot/tests/mks_robin_lite-tests b/buildroot/tests/mks_robin_lite similarity index 100% rename from buildroot/tests/mks_robin_lite-tests rename to buildroot/tests/mks_robin_lite diff --git a/buildroot/tests/mks_robin_mini-tests b/buildroot/tests/mks_robin_mini similarity index 100% rename from buildroot/tests/mks_robin_mini-tests rename to buildroot/tests/mks_robin_mini diff --git a/buildroot/tests/mks_robin_nano35-tests b/buildroot/tests/mks_robin_nano35 similarity index 100% rename from buildroot/tests/mks_robin_nano35-tests rename to buildroot/tests/mks_robin_nano35 diff --git a/buildroot/tests/mks_robin_nano35_stm32-tests b/buildroot/tests/mks_robin_nano35_stm32 similarity index 100% rename from buildroot/tests/mks_robin_nano35_stm32-tests rename to buildroot/tests/mks_robin_nano35_stm32 diff --git a/buildroot/tests/mks_robin_pro-tests b/buildroot/tests/mks_robin_pro similarity index 100% rename from buildroot/tests/mks_robin_pro-tests rename to buildroot/tests/mks_robin_pro diff --git a/buildroot/tests/mks_robin_stm32-tests b/buildroot/tests/mks_robin_stm32 similarity index 100% rename from buildroot/tests/mks_robin_stm32-tests rename to buildroot/tests/mks_robin_stm32 diff --git a/buildroot/tests/rambo-tests b/buildroot/tests/rambo similarity index 100% rename from buildroot/tests/rambo-tests rename to buildroot/tests/rambo diff --git a/buildroot/tests/rumba32-tests b/buildroot/tests/rumba32 similarity index 100% rename from buildroot/tests/rumba32-tests rename to buildroot/tests/rumba32 diff --git a/buildroot/tests/sanguino1284p-tests b/buildroot/tests/sanguino1284p similarity index 100% rename from buildroot/tests/sanguino1284p-tests rename to buildroot/tests/sanguino1284p diff --git a/buildroot/tests/sanguino644p-tests b/buildroot/tests/sanguino644p similarity index 100% rename from buildroot/tests/sanguino644p-tests rename to buildroot/tests/sanguino644p diff --git a/buildroot/tests/teensy31-tests b/buildroot/tests/teensy31 similarity index 100% rename from buildroot/tests/teensy31-tests rename to buildroot/tests/teensy31 diff --git a/buildroot/tests/teensy35-tests b/buildroot/tests/teensy35 similarity index 100% rename from buildroot/tests/teensy35-tests rename to buildroot/tests/teensy35 diff --git a/buildroot/tests/teensy41-tests b/buildroot/tests/teensy41 similarity index 100% rename from buildroot/tests/teensy41-tests rename to buildroot/tests/teensy41 diff --git a/platformio.ini b/platformio.ini index aad59362cc..74452754ad 100644 --- a/platformio.ini +++ b/platformio.ini @@ -215,7 +215,6 @@ extra_scripts = pre:buildroot/share/PlatformIO/scripts/common-dependencies.py pre:buildroot/share/PlatformIO/scripts/common-cxxflags.py pre:buildroot/share/PlatformIO/scripts/preflight-checks.py - post:buildroot/share/PlatformIO/scripts/common-dependencies-post.py build_flags = -fmax-errors=5 -g3 -D__MARLIN_FIRMWARE__ -fmerge-constants lib_deps = @@ -728,6 +727,12 @@ platform = ${common_LPC.platform} extends = common_LPC board = nxp_lpc1769 +# BTT SKR 1.4 needs a UART3 tweak +[env:LPC1768_btt_skr_v1_4] +platform = ${LPC1768.platform} +extends = env:LPC1768 +build_flags = ${env:LPC1768.build_flags} -DLPC_PINCFG_UART3_P4_28 + ################################# # # # STM32 Architecture #