Albert van Osch
4 years ago
committed by
GitHub
GitHub
7 changed files with 272 additions and 48 deletions
@ -0,0 +1,57 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
#pragma once |
|||
|
|||
// Zonestar (Z8XM2) Heated Bed thermistor. Added By AvanOsch
|
|||
// These are taken from the Zonestar settings in original Repetier firmware: Z8XM2_ZRIB_LCD12864_V51.zip
|
|||
const temp_entry_t temptable_503[] PROGMEM = { |
|||
{ OV( 12), 300 }, |
|||
{ OV( 27), 270 }, |
|||
{ OV( 47), 250 }, |
|||
{ OV( 68), 230 }, |
|||
{ OV( 99), 210 }, |
|||
{ OV( 120), 200 }, |
|||
{ OV( 141), 190 }, |
|||
{ OV( 171), 180 }, |
|||
{ OV( 201), 170 }, |
|||
{ OV( 261), 160 }, |
|||
{ OV( 321), 150 }, |
|||
{ OV( 401), 140 }, |
|||
{ OV( 451), 130 }, |
|||
{ OV( 551), 120 }, |
|||
{ OV( 596), 110 }, |
|||
{ OV( 626), 105 }, |
|||
{ OV( 666), 100 }, |
|||
{ OV( 697), 90 }, |
|||
{ OV( 717), 85 }, |
|||
{ OV( 798), 69 }, |
|||
{ OV( 819), 65 }, |
|||
{ OV( 870), 55 }, |
|||
{ OV( 891), 51 }, |
|||
{ OV( 922), 39 }, |
|||
{ OV( 968), 28 }, |
|||
{ OV( 980), 23 }, |
|||
{ OV( 991), 17 }, |
|||
{ OV( 1001), 9 }, |
|||
{ OV(1021), -27 }, |
|||
{ OV(1023), -200} |
|||
}; |
|||
@ -0,0 +1,159 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
#pragma once |
|||
|
|||
/**
|
|||
* ZRIB V5.2 Based on MKS BASE v1.4 with A4982 stepper drivers and digital micro-stepping |
|||
*/ |
|||
|
|||
#if HOTENDS > 2 || E_STEPPERS > 2 |
|||
#error "ZRIB V5.2 only supports up to 2 hotends / E-steppers. Comment out this line to continue." |
|||
#endif |
|||
|
|||
#define BOARD_INFO_NAME "ZRIB V5.2" |
|||
|
|||
#define MKS_BASE_VERSION 14 |
|||
#define IS_RAMPS_EFB |
|||
|
|||
//
|
|||
// Heaters / Fans
|
|||
//
|
|||
#define FAN_PIN 9 // PH6 ** Pin18 ** PWM9
|
|||
#define FAN1_PIN 6 |
|||
|
|||
//
|
|||
// Extra Extruder / Stepper for V5.2
|
|||
//
|
|||
#define E2_STEP_PIN 4 |
|||
#define E2_DIR_PIN 5 |
|||
#define E2_ENABLE_PIN 22 |
|||
|
|||
#include "pins_MKS_BASE_common.h" |
|||
|
|||
/*
|
|||
Available connectors on MKS BASE v1.4 (Basically same as ZRIB V5.2) |
|||
|
|||
======= |
|||
| GND | |
|||
|-----| E0 |
|||
| 10 | (10) PB4 ** Pin23 ** PWM10 |
|||
|-----| |
|||
| GND | |
|||
|-----| E1 |
|||
| 7 | ( 7) PH4 ** Pin16 ** PWM7 |
|||
|-----| |
|||
| GND | |
|||
|-----| FAN |
|||
| 9 | ( 9) PH6 ** Pin18 ** PWM9 |
|||
======= |
|||
|
|||
======= |
|||
| GND | |
|||
|-----| Heated Bed |
|||
| 8 | ( 8) PH5 ** Pin17 ** PWM8 |
|||
======= |
|||
|
|||
========== |
|||
| 12-24V | |
|||
|--------| Power |
|||
| GND | |
|||
========== |
|||
|
|||
XS3 Connector |
|||
================= |
|||
| 65 | GND | 5V | (65) PK3 ** Pin86 ** A11 |
|||
|----|-----|----| |
|||
| 66 | GND | 5V | (66) PK4 ** Pin85 ** A12 |
|||
================= |
|||
|
|||
Servos Connector |
|||
================= |
|||
| 11 | GND | 5V | (11) PB5 ** Pin24 ** PWM11 |
|||
|----|-----|----| |
|||
| 12 | GND | 5V | (12) PB6 ** Pin25 ** PWM12 |
|||
================= |
|||
|
|||
ICSP |
|||
================= |
|||
| 5V | 51 | GND | (51) PB2 ** Pin21 ** SPI_MOSI |
|||
|----|----|-----| |
|||
| 50 | 52 | RST | (50) PB3 ** Pin22 ** SPI_MISO |
|||
================= (52) PB1 ** Pin20 ** SPI_SCK |
|||
|
|||
XS6/AUX-1 Connector |
|||
====================== |
|||
| 5V | GND | NC | 20 | (20) PD1 ** Pin44 ** I2C_SDA |
|||
|----|-----|----|----| |
|||
| 50 | 51 | 52 | 21 | (50) PB3 ** Pin22 ** SPI_MISO |
|||
====================== (51) PB2 ** Pin21 ** SPI_MOSI |
|||
(52) PB1 ** Pin20 ** SPI_SCK |
|||
(21) PD0 ** Pin43 ** I2C_SCL |
|||
|
|||
Temperature |
|||
================================== |
|||
| GND | 69 | GND | 68 | GND | 67 | |
|||
================================== |
|||
(69) PK7 ** Pin82 ** A15 |
|||
(68) PK6 ** Pin83 ** A14 |
|||
(67) PK5 ** Pin84 ** A13 |
|||
|
|||
Limit Switches |
|||
============ |
|||
| 2 | GND | X+ ( 2) PE4 ** Pin6 ** PWM2 |
|||
|----|-----| |
|||
| 3 | GND | X- ( 3) PE5 ** Pin7 ** PWM3 |
|||
|----|-----| |
|||
| 15 | GND | Y+ (15) PJ0 ** Pin63 ** USART3_RX |
|||
|----|-----| |
|||
| 14 | GND | Y- (14) PJ1 ** Pin64 ** USART3_TX |
|||
|----|-----| |
|||
| 19 | GND | Z+ (19) PD2 ** Pin45 ** USART1_RX |
|||
|----|-----| |
|||
| 18 | GND | Z- (18) PD3 ** Pin46 ** USART1_TX |
|||
============ |
|||
|
|||
EXP1 |
|||
============ |
|||
| 37 | 35 | (37) PC0 ** Pin53 ** D37 |
|||
|-----|----| (35) PC2 ** Pin55 ** D35 |
|||
| 17 | 16 | (17) PH0 ** Pin12 ** USART2_RX |
|||
|-----|----| (16) PH1 ** Pin13 ** USART2_TX |
|||
| 23 | 25 | (23) PA1 ** Pin77 ** D23 |
|||
|-----|----| (25) PA3 ** Pin75 ** D25 |
|||
| 27 | 29 | (27) PA5 ** Pin73 ** D27 |
|||
|-----|----| (29) PA7 ** Pin71 ** D29 |
|||
| GND | 5V | |
|||
============ |
|||
|
|||
EXP2 |
|||
============ |
|||
| 50 | 52 | (50) PB3 ** Pin22 ** SPI_MISO |
|||
|-----|----| (52) PB1 ** Pin20 ** SPI_SCK |
|||
| 31 | 53 | (31) PC6 ** Pin59 ** D31 |
|||
|-----|----| (53) PB0 ** Pin19 ** SPI_SS |
|||
| 33 | 51 | (33) PC4 ** Pin57 ** D33 |
|||
|-----|----| (51) PB2 ** Pin21 ** SPI_MOSI |
|||
| 49 | 41 | (49) PL0 ** Pin35 ** D49 |
|||
|-----|----| (41) PG0 ** Pin51 ** D41 |
|||
| GND | NC | |
|||
============ |
|||
*/ |
|||
Loading…
Reference in new issue