andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Only set up SPI pins as needed (#19372)

vanilla_fb_2.0.x
Victor Oliveira 4 years ago
committed by GitHub
parent
648e7f73a5
commit
79d4123319
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 53 additions and 49 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 102
      Marlin/src/HAL/LPC1768/HAL_SPI.cpp

102
Marlin/src/HAL/LPC1768/HAL_SPI.cpp
View File

@ -39,10 +39,10 @@
* Some of the LCD interfaces/adapters result in the LCD SPI and the SD card
* SPI sharing pins. The SCK, MOSI & MISO pins can NOT be set/cleared with
* WRITE nor digitalWrite when the hardware SPI module within the LPC17xx is
* active. If any of these pins are shared then the software SPI must be used.
* active. If any of these pins are shared then the software SPI must be used.
*
* A more sophisticated hardware SPI can be found at the following link. This
* implementation has not been fully debugged.
* A more sophisticated hardware SPI can be found at the following link.
* This implementation has not been fully debugged.
* https://github.com/MarlinFirmware/Marlin/tree/071c7a78f27078fd4aee9a3ef365fcf5e143531e
*/
@ -170,34 +170,20 @@ static inline void waitSpiTxEnd(LPC_SSP_TypeDef *spi_d) {
while (SSP_GetStatus(spi_d, SSP_STAT_BUSY) == SET) { /* nada */ } // wait until BSY=0
}
// Retain the pin init state of the SPI, to avoid init more than once,
// even if more instances of SPIClass exist
static bool spiInitialised[BOARD_NR_SPI] = { false };
SPIClass::SPIClass(uint8_t device) {
// Init things specific to each SPI device
// clock divider setup is a bit of hack, and needs to be improved at a later date.
PINSEL_CFG_Type PinCfg; // data structure to hold init values
#if BOARD_NR_SPI >= 1
_settings[0].spi_d = LPC_SSP0;
_settings[0].dataMode = SPI_MODE0;
_settings[0].dataSize = DATA_SIZE_8BIT;
_settings[0].clock = SPI_CLOCK_MAX;
// _settings[0].clockDivider = determine_baud_rate(_settings[0].spi_d, _settings[0].clock);
PinCfg.Funcnum = 2;
PinCfg.OpenDrain = 0;
PinCfg.Pinmode = 0;
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI1_SCK_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI1_SCK_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(BOARD_SPI1_SCK_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI1_MISO_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI1_MISO_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_INPUT(BOARD_SPI1_MISO_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI1_MOSI_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI1_MOSI_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(BOARD_SPI1_MOSI_PIN);
//_settings[0].clockDivider = determine_baud_rate(_settings[0].spi_d, _settings[0].clock);
#endif
#if BOARD_NR_SPI >= 2
@ -205,34 +191,53 @@ SPIClass::SPIClass(uint8_t device) {
_settings[1].dataMode = SPI_MODE0;
_settings[1].dataSize = DATA_SIZE_8BIT;
_settings[1].clock = SPI_CLOCK_MAX;
// _settings[1].clockDivider = determine_baud_rate(_settings[1].spi_d, _settings[1].clock);
//_settings[1].clockDivider = determine_baud_rate(_settings[1].spi_d, _settings[1].clock);
#endif
setModule(device);
// Init the GPDMA controller
// TODO: call once in the constructor? or each time?
GPDMA_Init();
}
void SPIClass::begin() {
// Init the SPI pins in the first begin call
if ((_currentSetting->spi_d == LPC_SSP0 && spiInitialised[0] == false) ||
(_currentSetting->spi_d == LPC_SSP1 && spiInitialised[1] == false)) {
pin_t sck, miso, mosi;
if (_currentSetting->spi_d == LPC_SSP0) {
sck = BOARD_SPI1_SCK_PIN;
miso = BOARD_SPI1_MISO_PIN;
mosi = BOARD_SPI1_MOSI_PIN;
spiInitialised[0] = true;
}
else if (_currentSetting->spi_d == LPC_SSP1) {
sck = BOARD_SPI2_SCK_PIN;
miso = BOARD_SPI2_MISO_PIN;
mosi = BOARD_SPI2_MOSI_PIN;
spiInitialised[1] = true;
}
PINSEL_CFG_Type PinCfg; // data structure to hold init values
PinCfg.Funcnum = 2;
PinCfg.OpenDrain = 0;
PinCfg.Pinmode = 0;
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI2_SCK_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI2_SCK_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(sck);
PinCfg.Portnum = LPC176x::pin_port(sck);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(BOARD_SPI2_SCK_PIN);
SET_OUTPUT(sck);
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI2_MISO_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI2_MISO_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(miso);
PinCfg.Portnum = LPC176x::pin_port(miso);
PINSEL_ConfigPin(&PinCfg);
SET_INPUT(BOARD_SPI2_MISO_PIN);
SET_INPUT(miso);
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI2_MOSI_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI2_MOSI_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(mosi);
PinCfg.Portnum = LPC176x::pin_port(mosi);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(BOARD_SPI2_MOSI_PIN);
#endif
setModule(device);
/* Initialize GPDMA controller */
//TODO: call once in the constructor? or each time?
GPDMA_Init();
}
SET_OUTPUT(mosi);
}
void SPIClass::begin() {
updateSettings();
SSP_Cmd(_currentSetting->spi_d, ENABLE); // start SSP running
}
@ -246,7 +251,7 @@ void SPIClass::beginTransaction(const SPISettings &cfg) {
}
uint8_t SPIClass::transfer(const uint16_t b) {
/* send and receive a single byte */
// Send and receive a single byte
SSP_ReceiveData(_currentSetting->spi_d); // read any previous data
SSP_SendData(_currentSetting->spi_d, b);
waitSpiTxEnd(_currentSetting->spi_d); // wait for it to finish
@ -254,8 +259,7 @@ uint8_t SPIClass::transfer(const uint16_t b) {
}
uint16_t SPIClass::transfer16(const uint16_t data) {
return (transfer((data >> 8) & 0xFF) << 8)
| (transfer(data & 0xFF) & 0xFF);
return (transfer((data >> 8) & 0xFF) << 8) | (transfer(data & 0xFF) & 0xFF);
}
void SPIClass::end() {
@ -294,23 +298,23 @@ void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
// Enable dma on SPI
SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, ENABLE);
// only increase memory if minc is true
// Only increase memory if minc is true
GPDMACfg.MemoryIncrease = (minc ? GPDMA_DMACCxControl_SI : 0);
// Setup channel with given parameter
GPDMA_Setup(&GPDMACfg);
// enabled dma
// Enable DMA
GPDMA_ChannelCmd(0, ENABLE);
// wait data transfer
// Wait for data transfer
while (!GPDMA_IntGetStatus(GPDMA_STAT_RAWINTTC, 0) && !GPDMA_IntGetStatus(GPDMA_STAT_RAWINTERR, 0)) { }
// clear err and int
// Clear err and int
GPDMA_ClearIntPending (GPDMA_STATCLR_INTTC, 0);
GPDMA_ClearIntPending (GPDMA_STATCLR_INTERR, 0);
// dma disable
// Disable DMA
GPDMA_ChannelCmd(0, DISABLE);
waitSpiTxEnd(_currentSetting->spi_d);

Write Preview
Loading…
Cancel
Save