diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index b99d4f426f..646dc60aef 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -68,8 +68,9 @@ Here are some standard links for getting your machine calibrated: #define MOTHERBOARD BOARD_RAMPS_13_EFB #endif -// Define this to set a custom name for your generic Mendel, -// #define CUSTOM_MENDEL_NAME "This Mendel" +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +// #define CUSTOM_MACHINE_NAME "This RepRap" // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 10958e3fa4..37dc7af234 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -141,7 +141,7 @@ // M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work. // M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating // Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling -// M200 D- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters). +// M200 - set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters).:D- // M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000) // M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!! // M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec @@ -152,9 +152,9 @@ // M208 - Set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/sec] // M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction. // M218 - Set hotend offset (in mm): T X Y -// M220 S- set speed factor override percentage -// M221 S- set extrude factor override percentage -// M226 P S- Wait until the specified pin reaches the state required +// M220 - Set speed factor override percentage: S +// M221 - Set extrude factor override percentage: S +// M226 - Wait until the specified pin reaches the state required: P S // M240 - Trigger a camera to take a photograph // M250 - Set LCD contrast C (value 0..63) // M280 - Set servo position absolute. P: servo index, S: angle or microseconds @@ -178,7 +178,7 @@ // M503 - Print the current settings (from memory not from EEPROM). Use S0 to leave off headings. // M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) // M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] -// M665 - Set delta configurations +// M665 - Set delta configurations: L R S // M666 - Set delta endstop adjustment // M605 - Set dual x-carriage movement mode: S [ X R ] // M907 - Set digital trimpot motor current using axis codes. diff --git a/Marlin/configurator/config/Configuration.h b/Marlin/configurator/config/Configuration.h index 3fad145275..57f37756b3 100644 --- a/Marlin/configurator/config/Configuration.h +++ b/Marlin/configurator/config/Configuration.h @@ -68,8 +68,9 @@ Here are some standard links for getting your machine calibrated: #define MOTHERBOARD BOARD_RAMPS_13_EFB #endif -// Define this to set a custom name for your generic Mendel, -// #define CUSTOM_MENDEL_NAME "This Mendel" +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +// #define CUSTOM_MACHINE_NAME "This RepRap" // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) diff --git a/Marlin/configurator/config/language.h b/Marlin/configurator/config/language.h index 3fe7afd2ed..5d1fd6c2fb 100644 --- a/Marlin/configurator/config/language.h +++ b/Marlin/configurator/config/language.h @@ -75,7 +75,7 @@ #endif #ifdef CUSTOM_MENDEL_NAME - #warning CUSTOM_MENDEL_NAME deprecated - use CUSTOM_MACHINE_NAME + #error CUSTOM_MENDEL_NAME deprecated - use CUSTOM_MACHINE_NAME #define CUSTOM_MACHINE_NAME CUSTOM_MENDEL_NAME #endif diff --git a/Marlin/configurator/index.html b/Marlin/configurator/index.html index 9fa40a105d..54353913d2 100644 --- a/Marlin/configurator/index.html +++ b/Marlin/configurator/index.html @@ -46,7 +46,7 @@ - + diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 1efcad88c7..269b8b794e 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -62,8 +62,9 @@ Here are some standard links for getting your machine calibrated: #define MOTHERBOARD BOARD_FELIX2 #endif -// Define this to set a custom name for your generic Mendel, -// #define CUSTOM_MENDEL_NAME "This Mendel" +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Felix" // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h index dd5c371c08..49b9f5b0b7 100644 --- a/Marlin/example_configurations/Felix/Configuration_DUAL.h +++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h @@ -62,8 +62,9 @@ Here are some standard links for getting your machine calibrated: #define MOTHERBOARD BOARD_FELIX2 #endif -// Define this to set a custom name for your generic Mendel, -// #define CUSTOM_MENDEL_NAME "This Mendel" +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Felix Dual" // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index 2a331c9ece..e399ed8996 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -62,8 +62,8 @@ Here are some standard links for getting your machine calibrated: #define MOTHERBOARD BOARD_HEPHESTOS #endif -// Define this to set a custom name for your generic Mendel, -// #define CUSTOM_MENDEL_NAME "This Mendel" +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index 5adab57f5b..60e2db873c 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -62,8 +62,9 @@ Here are some standard links for getting your machine calibrated: #define MOTHERBOARD BOARD_K8200 #endif -// Define this to set a custom name for your generic Mendel, -// #define CUSTOM_MENDEL_NAME "This Mendel" +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +// #define CUSTOM_MACHINE_NAME "This RepRap" // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index c0032d4bbc..65fccb063d 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -80,8 +80,9 @@ Here are some standard links for getting your machine calibrated: #define MOTHERBOARD BOARD_RAMPS_13_EFB #endif -// Define this to set a custom name for your generic Mendel, -// #define CUSTOM_MENDEL_NAME "This Mendel" +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +// #define CUSTOM_MACHINE_NAME "This RepRap" // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 757c1628ef..293aa77169 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -62,8 +62,9 @@ Here are some standard links for getting your machine calibrated: #define MOTHERBOARD BOARD_WITBOX #endif -// Define this to set a custom name for your generic Mendel, -// #define CUSTOM_MENDEL_NAME "This Mendel" +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +// #define CUSTOM_MACHINE_NAME "This RepRap" // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index f1760f59e7..2562010ea7 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -62,8 +62,9 @@ Here are some standard links for getting your machine calibrated: #define MOTHERBOARD BOARD_RAMPS_13_EFB #endif -// Define this to set a custom name for your generic Mendel, -// #define CUSTOM_MENDEL_NAME "This Mendel" +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Deltabot" // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 990c4e7628..1c6313e938 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -62,8 +62,9 @@ Here are some standard links for getting your machine calibrated: #define MOTHERBOARD BOARD_RAMPS_13_EFB #endif -// Define this to set a custom name for your generic Mendel, -#define CUSTOM_MENDEL_NAME "Mini Kossel" +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Mini Kossel" // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 1eea3186cf..e355a41ea5 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -62,8 +62,9 @@ Here are some standard links for getting your machine calibrated: #define MOTHERBOARD BOARD_5DPRINT #endif -// Define this to set a custom name for your generic Mendel, -// #define CUSTOM_MENDEL_NAME "This Mendel" +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +// #define CUSTOM_MACHINE_NAME "This RepRap" // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 8a3c3a8546..06cd2ae475 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -62,8 +62,9 @@ Here are some standard links for getting your machine calibrated: #define MOTHERBOARD BOARD_OMCA #endif -// Define this to set a custom name for your generic Mendel, -// #define CUSTOM_MENDEL_NAME "This Mendel" +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +// #define CUSTOM_MACHINE_NAME "This RepRap" // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) diff --git a/Marlin/language.h b/Marlin/language.h index 3fe7afd2ed..5d1fd6c2fb 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -75,7 +75,7 @@ #endif #ifdef CUSTOM_MENDEL_NAME - #warning CUSTOM_MENDEL_NAME deprecated - use CUSTOM_MACHINE_NAME + #error CUSTOM_MENDEL_NAME deprecated - use CUSTOM_MACHINE_NAME #define CUSTOM_MACHINE_NAME CUSTOM_MENDEL_NAME #endif