Sergey
3 years ago
1 changed files with 43 additions and 64 deletions
@ -1,89 +1,68 @@ |
|||||
# Marlin 3D Printer Firmware |
# Marlin 3D Printer Firmware for Flying Bear 4S and 5 |
||||
|
|
||||
 |
Это конфигурация [официального Marlin](https://github.com/MarlinFirmware/Marlin) для принтера Flying Bear Ghost 4S и 5. На данный момент поддерживаются платы MKS Robin Nano 1.x, MKS Robin Nano v2, MKS Robin Nano-s v1.3, MKS Robin Nano v1.3 |
||||
 |
|
||||
 |
|
||||
[](https://github.com/MarlinFirmware/Marlin/actions) |
|
||||
|
|
||||
<img align="right" width=175 src="buildroot/share/pixmaps/logo/marlin-250.png" /> |
В данном репозитории есть несколько веток: |
||||
|
|
||||
Additional documentation can be found at the [Marlin Home Page](https://marlinfw.org/). |
* [FB4S_WIFI](https://github.com/Sergey1560/Marlin_FB4S/tree/FB4S_WIFI) - основная ветка. Эта ветка содержит дополнительный код для работы с модулем [MKS WIFI](https://github.com/makerbase-mks/MKS-WIFI), установленным в FB4S и FB5. Загрузка файлов через стандартный plugin в Cura. Классический интерфейс Color UI. |
||||
Please test this firmware and let us know if it misbehaves in any way. Volunteers are standing by! |
* [vanilla_fb_2.0.x](https://github.com/Sergey1560/Marlin_FB4S/tree/vanilla_fb_2.0.x) - ветка на основе 2.0.x ветки Marlin. Никаких изменений в коде. Все изменения только в файлах конфигурации, под платы robin nano и принтеры Flying Bear. Классический интерфейс Color UI. WIFI модуль не работает. |
||||
|
* [MKS_UI](https://github.com/Sergey1560/Marlin_FB4S/tree/MKS_UI) - ветка на основе 2.0.x ветки Marlin. В коде есть очень небольшое изменение размера буфера, для сборки на STM32F1. На STM32F4 никаких изменений в коде нет. Все изменения только в файлах конфигурации, под платы robin nano и принтеры Flying Bear. Интерфейс MKS UI. WIFI модуль работает. |
||||
|
|
||||
## Marlin 2.0 |
Если у вас есть какие-то вопросы по настройке прошивки или по ее использованию, вы можете задать свой вопрос в [telegram группе](https://t.me/Ghostbustersss). |
||||
|
|
||||
Marlin 2.0 takes this popular RepRap firmware to the next level by adding support for much faster 32-bit and ARM-based boards while improving support for 8-bit AVR boards. Read about Marlin's decision to use a "Hardware Abstraction Layer" below. |
## MKS WIFI модуль |
||||
|
|
||||
Download earlier versions of Marlin on the [Releases page](https://github.com/MarlinFirmware/Marlin/releases). |
В данной ветке WIFI модуль не работает. |
||||
|
|
||||
## Example Configurations |
### Варианты прошивки |
||||
|
|
||||
Before building Marlin you'll need to configure it for your specific hardware. Your vendor should have already provided source code with configurations for the installed firmware, but if you ever decide to upgrade you'll need updated configuration files. Marlin users have contributed dozens of tested example configurations to get you started. Visit the [MarlinFirmware/Configurations](https://github.com/MarlinFirmware/Configurations) repository to find the right configuration for your hardware. |
Для настройки под свои нужды, прошивку нужно собрать самостоятельно. |
||||
|
|
||||
## Building Marlin 2.0 |
Все настройки для плат Robin Nano v1.1(1.2) уже сделаны, можно ничего не менять. |
||||
|
|
||||
To build Marlin 2.0 you'll need [Arduino IDE 1.8.8 or newer](https://www.arduino.cc/en/main/software) or [PlatformIO](http://docs.platformio.org/en/latest/ide.html#platformio-ide). Detailed build and install instructions are posted at: |
Плата Robin Nano-s v1.3 и Robin Nano v1.3 сделана на другом микроконтроллере (stm32f407), поэтому для сборки прошивки под эту плату нужно изменить: |
||||
|
|
||||
- [Installing Marlin (Arduino)](http://marlinfw.org/docs/basics/install_arduino.html) |
* В файле Marlin/Configuration.h параметр MOTHERBOARD: |
||||
- [Installing Marlin (VSCode)](http://marlinfw.org/docs/basics/install_platformio_vscode.html). |
|
||||
|
|
||||
### Supported Platforms |
```C |
||||
|
#ifndef MOTHERBOARD |
||||
|
#define MOTHERBOARD BOARD_MKS_ROBIN_NANO_V1_3_F4 |
||||
|
#endif |
||||
|
``` |
||||
|
|
||||
Platform|MCU|Example Boards |
* В файле platformio.ini в параметре default_envs указать mks_robin_nano_v1_3_f4 |
||||
--------|---|------- |
|
||||
[Arduino AVR](https://www.arduino.cc/)|ATmega|RAMPS, Melzi, RAMBo |
|
||||
[Teensy++ 2.0](http://www.microchip.com/wwwproducts/en/AT90USB1286)|AT90USB1286|Printrboard |
|
||||
[Arduino Due](https://www.arduino.cc/en/Guide/ArduinoDue)|SAM3X8E|RAMPS-FD, RADDS, RAMPS4DUE |
|
||||
[ESP32](https://github.com/espressif/arduino-esp32)|ESP32|FYSETC E4, E4d@BOX, MRR |
|
||||
[LPC1768](http://www.nxp.com/products/microcontrollers-and-processors/arm-based-processors-and-mcus/lpc-cortex-m-mcus/lpc1700-cortex-m3/512kb-flash-64kb-sram-ethernet-usb-lqfp100-package:LPC1768FBD100)|ARM® Cortex-M3|MKS SBASE, Re-ARM, Selena Compact |
|
||||
[LPC1769](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc1700-cortex-m3/512kb-flash-64kb-sram-ethernet-usb-lqfp100-package:LPC1769FBD100)|ARM® Cortex-M3|Smoothieboard, Azteeg X5 mini, TH3D EZBoard |
|
||||
[STM32F103](https://www.st.com/en/microcontrollers-microprocessors/stm32f103.html)|ARM® Cortex-M3|Malyan M200, GTM32 Pro, MKS Robin, BTT SKR Mini |
|
||||
[STM32F401](https://www.st.com/en/microcontrollers-microprocessors/stm32f401.html)|ARM® Cortex-M4|ARMED, Rumba32, SKR Pro, Lerdge, FYSETC S6 |
|
||||
[STM32F7x6](https://www.st.com/en/microcontrollers-microprocessors/stm32f7x6.html)|ARM® Cortex-M7|The Borg, RemRam V1 |
|
||||
[SAMD51P20A](https://www.adafruit.com/product/4064)|ARM® Cortex-M4|Adafruit Grand Central M4 |
|
||||
[Teensy 3.5](https://www.pjrc.com/store/teensy35.html)|ARM® Cortex-M4| |
|
||||
[Teensy 3.6](https://www.pjrc.com/store/teensy36.html)|ARM® Cortex-M4| |
|
||||
[Teensy 4.0](https://www.pjrc.com/store/teensy40.html)|ARM® Cortex-M7| |
|
||||
[Teensy 4.1](https://www.pjrc.com/store/teensy41.html)|ARM® Cortex-M7| |
|
||||
Linux Native|x86/ARM/etc.|Raspberry Pi |
|
||||
|
|
||||
## Submitting Changes |
В меню Platformio можно не выбирать плату, а использовать для сборки сочетание клавиш Ctrl+Alt+B. |
||||
|
|
||||
- Submit **Bug Fixes** as Pull Requests to the ([bugfix-2.0.x](https://github.com/MarlinFirmware/Marlin/tree/bugfix-2.0.x)) branch. |
После компиляции, готовая прошивка лежит в .pio/build/mks_robin_nano35/Robin_nano35.bin для плат Robin Nano v1.1(1.2) и в .pio/build/mks_robin_nano_v1_3/Robin_nano35.bin для плат Robin Nano-s v1.3 и Robin Nano v1.3 |
||||
- Follow the [Coding Standards](http://marlinfw.org/docs/development/coding_standards.html) to gain points with the maintainers. |
|
||||
- Please submit your questions and concerns to the [Issue Queue](https://github.com/MarlinFirmware/Marlin/issues). |
|
||||
|
|
||||
## Marlin Support |
На SD карту нужно записывать именно Robin_nano35.bin, а не firmaware.bin |
||||
|
|
||||
The Issue Queue is reserved for Bug Reports and Feature Requests. To get help with configuration and troubleshooting, please use the following resources: |
### Что нужно настроить |
||||
|
|
||||
- [Marlin Documentation](http://marlinfw.org) - Official Marlin documentation |
Нужно настроить направления движения по осям под свои драйвера в файле [Configuration.h](./Marlin/Configuration.h) (параметры INVERT_?_DIR, строка 1373). |
||||
- [Marlin Discord](https://discord.gg/n5NJ59y) - Discuss issues with Marlin users and developers |
|
||||
- Facebook Group ["Marlin Firmware"](https://www.facebook.com/groups/1049718498464482/) |
|
||||
- RepRap.org [Marlin Forum](http://forums.reprap.org/list.php?415) |
|
||||
- Facebook Group ["Marlin Firmware for 3D Printers"](https://www.facebook.com/groups/3Dtechtalk/) |
|
||||
- [Marlin Configuration](https://www.youtube.com/results?search_query=marlin+configuration) on YouTube |
|
||||
|
|
||||
## Contributors |
Для удобства, в файле [Configuration.h](./Marlin/Configuration.h) уже есть готовые наборы настроек для всех типовых конфигураций. |
||||
|
|
||||
Marlin is constantly improving thanks to a huge number of contributors from all over the world bringing their specialties and talents. Huge thanks are due to [all the contributors](https://github.com/MarlinFirmware/Marlin/graphs/contributors) who regularly patch up bugs, help direct traffic, and basically keep Marlin from falling apart. Marlin's continued existence would not be possible without them. |
Для плат Robin Nano v1.1(1.2): |
||||
|
|
||||
## Administration |
* ALL_DRV_2208 - 4 драйвера TMC 2208/2209 |
||||
|
* FB_4S_STOCK - 4 драйвера A4988. Это конфигурация для FB4S с стандартными драйверами. |
||||
|
* FB_5_STOCK - 2 TMC 2208 (на осях X,Y) и 2 A4988 (на осях Z,E) |
||||
|
|
||||
Regular users can open and close their own issues, but only the administrators can do project-related things like add labels, merge changes, set milestones, and kick trolls. The current Marlin admin team consists of: |
Для плат Robin Nano v1.3: |
||||
|
|
||||
- Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] - USA - Project Maintainer [](http://www.thinkyhead.com/donate-to-marlin) |
* FB_5_NANO_S_V1_3 - для платы Robin Nano-S v1.3 |
||||
- Roxanne Neufeld [[@Roxy-3D](https://github.com/Roxy-3D)] - USA |
* FB_5_NANO_V1_3_4TMC - Robin Nano v1.3 c 4 драйверами TMC 2208/2209 |
||||
- Keith Bennett [[@thisiskeithb](https://github.com/thisiskeithb)] - USA |
* FB_5_NANO_V1_3 - Robin Nano v1.3 c 2 драйверами TMC 2208/2209 и 2 драйверами A4988 |
||||
- Victor Oliveira [[@rhapsodyv](https://github.com/rhapsodyv)] - Brazil |
|
||||
- Chris Pepper [[@p3p](https://github.com/p3p)] - UK |
|
||||
- Jason Smith [[@sjasonsmith](https://github.com/sjasonsmith)] - USA |
|
||||
- Luu Lac [[@shitcreek](https://github.com/shitcreek)] - USA |
|
||||
- Bob Kuhn [[@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)] - USA |
|
||||
- Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands [](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software) |
|
||||
|
|
||||
## License |
В строке 1322 нужно выбрать только один из вариантов: |
||||
|
|
||||
Marlin is published under the [GPL license](/LICENSE) because we believe in open development. The GPL comes with both rights and obligations. Whether you use Marlin firmware as the driver for your open or closed-source product, you must keep Marlin open, and you must provide your compatible Marlin source code to end users upon request. The most straightforward way to comply with the Marlin license is to make a fork of Marlin on Github, perform your modifications, and direct users to your modified fork. |
```C |
||||
|
#define ALL_DRV_2208 |
||||
While we can't prevent the use of this code in products (3D printers, CNC, etc.) that are closed source or crippled by a patent, we would prefer that you choose another firmware or, better yet, make your own. |
//#define FB_4S_STOCK |
||||
|
//#define FB_5_STOCK |
||||
|
//#define FB_5_NANO_S_V1_3 |
||||
|
//#define FB_5_NANO_V1_3_4TMC |
||||
|
//#define FB_5_NANO_V1_3 |
||||
|
``` |
||||
|
|||||
Loading…
Reference in new issue