diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index db266b524b..1f6b0db946 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -35,7 +35,7 @@ * * Advanced settings can be found in Configuration_adv.h */ -#define CONFIGURATION_H_VERSION 020007 +#define CONFIGURATION_H_VERSION 020008 //=========================================================================== //============================= Getting Started ============================= @@ -2205,22 +2205,83 @@ //============================================================================= /** - * TFT Type - Select your Display type - * - * Available options are: - * MKS_TS35_V2_0, - * MKS_ROBIN_TFT24, MKS_ROBIN_TFT28, MKS_ROBIN_TFT32, MKS_ROBIN_TFT35, - * MKS_ROBIN_TFT43, MKS_ROBIN_TFT_V1_1R - * TFT_TRONXY_X5SA, ANYCUBIC_TFT35, LONGER_LK_TFT28 - * TFT_GENERIC - * - * For TFT_GENERIC, you need to configure these 3 options: - * Driver: TFT_DRIVER - * Current Drivers are: AUTO, ST7735, ST7789, ST7796, R61505, ILI9328, ILI9341, ILI9488 - * Resolution: TFT_WIDTH and TFT_HEIGHT - * Interface: TFT_INTERFACE_FSMC or TFT_INTERFACE_SPI + * Specific TFT Model Presets. Enable one of the following options + * or enable TFT_GENERIC and set sub-options. */ + +// +// 480x320, 3.5", SPI Display From MKS +// Normally used in MKS Robin Nano V2 +// +//#define MKS_TS35_V2_0 + +// +// 320x240, 2.4", FSMC Display From MKS +// Normally used in MKS Robin Nano V1.2 +// +//#define MKS_ROBIN_TFT24 + +// +// 320x240, 2.8", FSMC Display From MKS +// Normally used in MKS Robin Nano V1.2 +// +//#define MKS_ROBIN_TFT28 + +// +// 320x240, 3.2", FSMC Display From MKS +// Normally used in MKS Robin Nano V1.2 +// +//#define MKS_ROBIN_TFT32 + +// +// 480x320, 3.5", FSMC Display From MKS +// Normally used in MKS Robin Nano V1.2 +// +//#define MKS_ROBIN_TFT35 + +// +// 480x272, 4.3", FSMC Display From MKS +// +//#define MKS_ROBIN_TFT43 + +// +// 320x240, 3.2", FSMC Display From MKS +// Normally used in MKS Robin +// +//#define MKS_ROBIN_TFT_V1_1R + +// +// 480x320, 3.5", FSMC Stock Display from TronxXY +// +//#define TFT_TRONXY_X5SA + +// +// 480x320, 3.5", FSMC Stock Display from AnyCubic +// +//#define ANYCUBIC_TFT35 + +// +// 320x240, 2.8", FSMC Stock Display from Longer/Alfawise +// +//#define LONGER_LK_TFT28 + +// +// Generic TFT with detailed options +// //#define TFT_GENERIC +#if ENABLED(TFT_GENERIC) + // :[ 'AUTO', 'ST7735', 'ST7789', 'ST7796', 'R61505', 'ILI9328', 'ILI9341', 'ILI9488' ] + #define TFT_DRIVER AUTO + + // Interface. Enable one of the following options: + //#define TFT_INTERFACE_FSMC + //#define TFT_INTERFACE_SPI + + // TFT Resolution. Enable one of the following options: + //#define TFT_RES_320x240 + //#define TFT_RES_480x272 + //#define TFT_RES_480x320 +#endif /** * TFT UI - User Interface Selection. Enable one of the following options: diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index bcacddd20d..714bcb288f 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -30,7 +30,7 @@ * * Basic settings can be found in Configuration.h */ -#define CONFIGURATION_ADV_H_VERSION 020007 +#define CONFIGURATION_ADV_H_VERSION 020008 //=========================================================================== //============================= Thermal Settings ============================ @@ -1048,10 +1048,10 @@ // @section lcd -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) +#if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen #endif diff --git a/Marlin/src/HAL/LPC1768/inc/SanityCheck.h b/Marlin/src/HAL/LPC1768/inc/SanityCheck.h index f5051d32a1..8b7d27742d 100644 --- a/Marlin/src/HAL/LPC1768/inc/SanityCheck.h +++ b/Marlin/src/HAL/LPC1768/inc/SanityCheck.h @@ -72,7 +72,7 @@ static_assert(!(NUM_SERVOS && ENABLED(FAST_PWM_FAN)), "BLTOUCH and Servos are in //#endif #if MB(RAMPS_14_RE_ARM_EFB, RAMPS_14_RE_ARM_EEB, RAMPS_14_RE_ARM_EFF, RAMPS_14_RE_ARM_EEF, RAMPS_14_RE_ARM_SF) - #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI) + #if IS_RRD_FG_SC && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI) #error "Re-ARM with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and TMC2130 requires TMC_USE_SW_SPI." #endif #endif diff --git a/Marlin/src/HAL/STM32F1/HAL.cpp b/Marlin/src/HAL/STM32F1/HAL.cpp index cd1efc1659..6733aead6d 100644 --- a/Marlin/src/HAL/STM32F1/HAL.cpp +++ b/Marlin/src/HAL/STM32F1/HAL.cpp @@ -130,7 +130,7 @@ const uint8_t adc_pins[] = { #if ENABLED(FILAMENT_WIDTH_SENSOR) FILWIDTH_PIN, #endif - #if ENABLED(ADC_KEYPAD) + #if HAS_ADC_BUTTONS ADC_KEYPAD_PIN, #endif #if HAS_JOY_ADC_X @@ -187,7 +187,7 @@ enum TempPinIndex : char { #if ENABLED(FILAMENT_WIDTH_SENSOR) FILWIDTH, #endif - #if ENABLED(ADC_KEYPAD) + #if HAS_ADC_BUTTONS ADC_KEY, #endif #if HAS_JOY_ADC_X @@ -389,7 +389,7 @@ void HAL_adc_start_conversion(const uint8_t adc_pin) { #if ENABLED(FILAMENT_WIDTH_SENSOR) case FILWIDTH_PIN: pin_index = FILWIDTH; break; #endif - #if ENABLED(ADC_KEYPAD) + #if HAS_ADC_BUTTONS case ADC_KEYPAD_PIN: pin_index = ADC_KEY; break; #endif #if ENABLED(POWER_MONITOR_CURRENT) diff --git a/Marlin/src/core/macros.h b/Marlin/src/core/macros.h index 21bb32c4cf..7948e8ce87 100644 --- a/Marlin/src/core/macros.h +++ b/Marlin/src/core/macros.h @@ -170,7 +170,7 @@ #define _DO_12(W,C,A,V...) (_##W##_1(A) C _DO_11(W,C,V)) #define __DO_N(W,C,N,V...) _DO_##N(W,C,V) #define _DO_N(W,C,N,V...) __DO_N(W,C,N,V) -#define DO(W,C,V...) _DO_N(W,C,NUM_ARGS(V),V) +#define DO(W,C,V...) (_DO_N(W,C,NUM_ARGS(V),V)) // Macros to support option testing #define _CAT(a,V...) a##V @@ -186,6 +186,7 @@ #define _DIS_1(O) NOT(_ENA_1(O)) #define ENABLED(V...) DO(ENA,&&,V) #define DISABLED(V...) DO(DIS,&&,V) +#define COUNT_ENABLED(V...) DO(ENA,+,V) #define TERN(O,A,B) _TERN(_ENA_1(O),B,A) // OPTION converted to '0' or '1' #define TERN0(O,A) _TERN(_ENA_1(O),0,A) // OPTION converted to A or '0' @@ -200,6 +201,7 @@ #define ALL(V...) ENABLED(V) #define BOTH(V1,V2) ALL(V1,V2) #define EITHER(V1,V2) ANY(V1,V2) +#define MANY(V...) (COUNT_ENABLED(V) > 1) // Macros to support pins/buttons exist testing #define PIN_EXISTS(PN) (defined(PN##_PIN) && PN##_PIN >= 0) diff --git a/Marlin/src/feature/bedlevel/ubl/ubl.h b/Marlin/src/feature/bedlevel/ubl/ubl.h index 9ac9de1806..22ca1f69ec 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl.h +++ b/Marlin/src/feature/bedlevel/ubl/ubl.h @@ -59,7 +59,7 @@ class unified_bed_leveling { static int g29_grid_size; #endif - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL static void move_z_with_encoder(const float &multiplier); static float measure_point_with_encoder(); static float measure_business_card_thickness(float in_height); diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h index 56ce2ca5ed..4eeb0e8a44 100644 --- a/Marlin/src/inc/Conditionals_LCD.h +++ b/Marlin/src/inc/Conditionals_LCD.h @@ -46,7 +46,7 @@ * * DOGLCD : Run a Graphical LCD through U8GLib (with MarlinUI) * IS_ULTIPANEL : Define LCD_PINS_D5/6/7 for direct-connected "Ultipanel" LCDs - * IS_ULTRA_LCD : Ultra LCD, not necessarily Ultipanel. Used most often with NEWPANEL. + * IS_ULTRA_LCD : Ultra LCD, not necessarily Ultipanel. * IS_RRD_SC : Common RRD Smart Controller digital interface pins * IS_RRD_FG_SC : Common RRD Full Graphical Smart Controller digital interface pins * U8GLIB_ST7920 : Most common DOGM display SPI interface, supporting a "lightweight" display mode. @@ -63,22 +63,21 @@ #elif ENABLED(CARTESIO_UI) #define DOGLCD - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 #elif EITHER(DWIN_MARLINUI_PORTRAIT, DWIN_MARLINUI_LANDSCAPE) #define IS_DWIN_MARLINUI 1 - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 #elif ENABLED(ZONESTAR_LCD) - #define ADC_KEYPAD - #define IS_RRW_KEYPAD + #define HAS_ADC_BUTTONS 1 #define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 #define ADC_KEY_NUM 8 - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 - // This helps to implement ADC_KEYPAD menus + // This helps to implement HAS_ADC_BUTTONS menus #define REVERSE_MENU_DIRECTION #define ENCODER_PULSES_PER_STEP 1 #define ENCODER_STEPS_PER_MENU_ITEM 1 @@ -86,29 +85,25 @@ #elif ENABLED(ZONESTAR_12864LCD) #define DOGLCD - #define IS_RRD_SC + #define IS_RRD_SC 1 #define U8GLIB_ST7920 #elif ENABLED(ZONESTAR_12864OLED) - #define IS_RRD_SC + #define IS_RRD_SC 1 #define U8GLIB_SH1106 #elif ENABLED(ZONESTAR_12864OLED_SSD1306) - #define IS_RRD_SC + #define IS_RRD_SC 1 #define IS_U8GLIB_SSD1306 #elif ENABLED(RADDS_DISPLAY) - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 #define ENCODER_PULSES_PER_STEP 2 -#elif EITHER(ANET_FULL_GRAPHICS_LCD, BQ_LCD_SMART_CONTROLLER) - - #define IS_RRD_FG_SC - #elif ANY(miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864) #define DOGLCD - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 #if ENABLED(miniVIKI) #define U8GLIB_ST7565_64128N @@ -123,40 +118,33 @@ #elif ENABLED(OLED_PANEL_TINYBOY2) #define IS_U8GLIB_SSD1306 - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 #elif ENABLED(RA_CONTROL_PANEL) #define LCD_I2C_TYPE_PCA8574 #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #define DOGLCD #define U8GLIB_ST7920 - #define IS_ULTIPANEL - -#elif ENABLED(CR10_STOCKDISPLAY) - - #define IS_RRD_FG_SC - #define BOARD_ST7920_DELAY_1 DELAY_NS(125) - #define BOARD_ST7920_DELAY_2 DELAY_NS(125) - #define BOARD_ST7920_DELAY_3 DELAY_NS(125) + #define IS_ULTIPANEL 1 #elif ENABLED(MKS_12864OLED) - #define IS_RRD_SC + #define IS_RRD_SC 1 #define U8GLIB_SH1106 #elif ENABLED(MKS_12864OLED_SSD1306) - #define IS_RRD_SC + #define IS_RRD_SC 1 #define IS_U8GLIB_SSD1306 #elif ENABLED(FYSETC_242_OLED_12864) - #define IS_RRD_SC + #define IS_RRD_SC 1 #define U8GLIB_SH1106 #define LED_CONTROL_MENU @@ -179,7 +167,7 @@ #define FYSETC_MINI_12864 #define DOGLCD - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 #define LED_COLORS_REDUCE_GREEN #if ENABLED(PSU_CONTROL) && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) #define LED_BACKLIGHT_TIMEOUT 10000 @@ -205,7 +193,7 @@ #elif ENABLED(ULTI_CONTROLLER) - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 #define U8GLIB_SSD1309 #define LCD_RESET_PIN LCD_PINS_D6 // This controller need a reset pin #define ENCODER_PULSES_PER_STEP 2 @@ -213,14 +201,14 @@ #elif ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) - #define IS_RRD_SC + #define IS_RRD_SC 1 #define LCD_WIDTH 16 #define LCD_HEIGHT 2 #elif EITHER(TFTGLCD_PANEL_SPI, TFTGLCD_PANEL_I2C) #define IS_TFTGLCD_PANEL 1 - #define IS_ULTIPANEL // Note that IS_ULTIPANEL leads to HAS_WIRED_LCD + #define IS_ULTIPANEL 1 // Note that IS_ULTIPANEL leads to HAS_WIRED_LCD #if ENABLED(SDSUPPORT) && DISABLED(LCD_PROGRESS_BAR) #define LCD_PROGRESS_BAR @@ -239,14 +227,35 @@ #define CONVERT_TO_EXT_ASCII // Use extended 128-255 symbols from ASCII table. // At this time present conversion only for cyrillic - bg, ru and uk languages. // First 7 ASCII symbols in panel font must be replaced with Marlin's special symbols. + +#elif ENABLED(CR10_STOCKDISPLAY) + + #define IS_RRD_FG_SC 1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(125) + #define BOARD_ST7920_DELAY_2 DELAY_NS(125) + #define BOARD_ST7920_DELAY_3 DELAY_NS(125) + +#elif ANY(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, ANET_FULL_GRAPHICS_LCD, BQ_LCD_SMART_CONTROLLER) + + #define IS_RRD_FG_SC 1 + +#elif ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + + // RepRapDiscount LCD or Graphical LCD with rotary click encoder + #define IS_RRD_SC 1 + #endif -#if ENABLED(IS_RRD_FG_SC) - #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +// ST7920-based graphical displays +#if ANY(IS_RRD_FG_SC, LCD_FOR_MELZI, SILVER_GATE_GLCD_CONTROLLER) + #define DOGLCD + #define U8GLIB_ST7920 + #define IS_RRD_SC 1 #endif +// ST7565 / 64128N graphical displays #if EITHER(MAKRPANEL, MINIPANEL) - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 #define DOGLCD #if ENABLED(MAKRPANEL) #define U8GLIB_ST7565_64128N @@ -258,7 +267,7 @@ #endif #if ENABLED(OVERLORD_OLED) - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 #define U8GLIB_SH1106 /** * PCA9632 for buzzer and LEDs via i2c @@ -278,64 +287,44 @@ // 128x64 I2C OLED LCDs - SSD1306/SSD1309/SH1106 #if ANY(U8GLIB_SSD1306, U8GLIB_SSD1309, U8GLIB_SH1106) #define HAS_U8GLIB_I2C_OLED 1 -#endif -#if HAS_U8GLIB_I2C_OLED - #define IS_ULTRA_LCD + #define IS_ULTRA_LCD 1 #define DOGLCD #endif -// ST7920-based graphical displays -#if ANY(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, LCD_FOR_MELZI, SILVER_GATE_GLCD_CONTROLLER) - #define DOGLCD - #define U8GLIB_ST7920 - #define IS_RRD_SC -#endif - -// RepRapDiscount LCD or Graphical LCD with rotary click encoder -#if ENABLED(IS_RRD_SC) - #define REPRAP_DISCOUNT_SMART_CONTROLLER -#endif - /** * SPI Ultipanels */ // Basic Ultipanel-like displays -#if ANY(ULTIMAKERCONTROLLER, REPRAP_DISCOUNT_SMART_CONTROLLER, G3D_PANEL, RIGIDBOT_PANEL, PANEL_ONE, U8GLIB_SH1106) - #define IS_ULTIPANEL +#if ANY(ULTIMAKERCONTROLLER, IS_RRD_SC, G3D_PANEL, RIGIDBOT_PANEL, PANEL_ONE, U8GLIB_SH1106) + #define IS_ULTIPANEL 1 #endif // Einstart OLED has Cardinal nav via pins defined in pins_EINSTART-S.h #if ENABLED(U8GLIB_SH1106_EINSTART) #define DOGLCD - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 #endif -// Compatibility -#if ENABLED(FSMC_GRAPHICAL_TFT) - #define TFT_CLASSIC_UI - #define TFT_INTERFACE_FSMC - #define TFT_GENERIC -#elif ENABLED(SPI_GRAPHICAL_TFT) - #define TFT_CLASSIC_UI - #define TFT_INTERFACE_SPI +// TFT Compatibility +#if ANY(FSMC_GRAPHICAL_TFT, SPI_GRAPHICAL_TFT, TFT_320x240, TFT_480x320, TFT_320x240_SPI, TFT_480x320_SPI, TFT_LVGL_UI_FSMC, TFT_LVGL_UI_SPI) + #define IS_LEGACY_TFT 1 #define TFT_GENERIC -#elif EITHER(TFT_320x240, TFT_480x320) - #define TFT_COLOR_UI + #warning "Don't forget to update your TFT settings in Configuration.h." +#endif + +#if ANY(FSMC_GRAPHICAL_TFT, TFT_320x240, TFT_480x320, TFT_LVGL_UI_FSMC) #define TFT_INTERFACE_FSMC - #define TFT_GENERIC -#elif EITHER(TFT_320x240_SPI, TFT_480x320_SPI) - #define TFT_COLOR_UI +#elif ANY(SPI_GRAPHICAL_TFT, TFT_320x240_SPI, TFT_480x320_SPI, TFT_LVGL_UI_SPI) #define TFT_INTERFACE_SPI - #define TFT_GENERIC -#elif ENABLED(TFT_LVGL_UI_FSMC) - #define TFT_LVGL_UI - #define TFT_INTERFACE_FSMC - #define TFT_GENERIC -#elif ENABLED(TFT_LVGL_UI_SPI) +#endif + +#if EITHER(FSMC_GRAPHICAL_TFT, SPI_GRAPHICAL_TFT) + #define TFT_CLASSIC_UI +#elif ANY(TFT_320x240, TFT_480x320, TFT_320x240_SPI, TFT_480x320_SPI) + #define TFT_COLOR_UI +#elif EITHER(TFT_LVGL_UI_FSMC, TFT_LVGL_UI_SPI) #define TFT_LVGL_UI - #define TFT_INTERFACE_SPI - #define TFT_GENERIC #endif // FSMC/SPI TFT Panels (LVGL) @@ -350,7 +339,7 @@ #if TFT_SCALED_DOGLCD #define DOGLCD - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 #define DELAYED_BACKLIGHT_INIT #elif ENABLED(TFT_LVGL_UI) #define DELAYED_BACKLIGHT_INIT @@ -359,7 +348,7 @@ // Color UI #if ENABLED(TFT_COLOR_UI) #define HAS_GRAPHICAL_TFT 1 - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 #endif /** @@ -383,7 +372,7 @@ #define LCD_I2C_TYPE_MCP23017 #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander #define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (optional) - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 #elif ENABLED(LCD_I2C_VIKI) @@ -398,7 +387,7 @@ #define LCD_I2C_TYPE_MCP23017 #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander #define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 #define ENCODER_FEEDRATE_DEADZONE 4 @@ -410,7 +399,7 @@ #define STD_ENCODER_PULSES_PER_STEP 2 #define STD_ENCODER_STEPS_PER_MENU_ITEM 1 -#elif ANY(REPRAP_DISCOUNT_SMART_CONTROLLER, miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864, OLED_PANEL_TINYBOY2, BQ_LCD_SMART_CONTROLLER, LCD_I2C_PANELOLU2) +#elif ANY(IS_RRD_SC, miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864, OLED_PANEL_TINYBOY2, BQ_LCD_SMART_CONTROLLER, LCD_I2C_PANELOLU2) #define STD_ENCODER_PULSES_PER_STEP 4 #define STD_ENCODER_STEPS_PER_MENU_ITEM 1 @@ -443,30 +432,24 @@ // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection #if ENABLED(FF_INTERFACEBOARD) #define SR_LCD_3W_NL // Non latching 3 wire shift register - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 #elif ENABLED(SAV_3DLCD) #define SR_LCD_2W_NL // Non latching 2 wire shift register - #define IS_ULTIPANEL + #define IS_ULTIPANEL 1 +#elif ENABLED(ULTIPANEL) + #define IS_ULTIPANEL 1 #endif -#if ENABLED(IS_ULTIPANEL) - #define ULTIPANEL -#endif -#if ENABLED(ULTIPANEL) - #define IS_ULTRA_LCD - #define NEWPANEL -#endif -#if ENABLED(IS_ULTRA_LCD) - #define ULTRA_LCD +#if EITHER(IS_ULTIPANEL, ULTRA_LCD) + #define IS_ULTRA_LCD 1 #endif -#if ENABLED(IS_RRW_KEYPAD) - #define REPRAPWORLD_KEYPAD +#if EITHER(IS_ULTIPANEL, REPRAPWORLD_KEYPAD) + #define IS_NEWPANEL 1 #endif -// Keypad needs a move step -#if ENABLED(REPRAPWORLD_KEYPAD) - #define NEWPANEL +#if EITHER(ZONESTAR_LCD, REPRAPWORLD_KEYPAD) + #define IS_RRW_KEYPAD 1 #ifndef REPRAPWORLD_KEYPAD_MOVE_STEP #define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 #endif @@ -479,16 +462,16 @@ // Extensible UI serial touch screens. (See src/lcd/extui) #if ANY(HAS_DGUS_LCD, MALYAN_LCD, TOUCH_UI_FTDI_EVE, ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON) - #define IS_EXTUI + #define IS_EXTUI 1 #define EXTENSIBLE_UI #endif // Aliases for LCD features -#if EITHER(ULTRA_LCD, EXTENSIBLE_UI) +#if EITHER(IS_ULTRA_LCD, EXTENSIBLE_UI) #define HAS_DISPLAY 1 #endif -#if ENABLED(ULTRA_LCD) +#if IS_ULTRA_LCD #define HAS_WIRED_LCD 1 #if ENABLED(DOGLCD) #define HAS_MARLINUI_U8GLIB 1 @@ -499,12 +482,9 @@ #endif #endif -#if ENABLED(ULTIPANEL) && DISABLED(NO_LCD_MENUS) +#if IS_ULTIPANEL && DISABLED(NO_LCD_MENUS) #define HAS_LCD_MENU 1 #endif -#if ENABLED(ADC_KEYPAD) - #define HAS_ADC_BUTTONS 1 -#endif #if HAS_MARLINUI_U8GLIB #ifndef LCD_PIXEL_WIDTH @@ -837,83 +817,85 @@ #if ENABLED(MKS_TS35_V2_0) // Most common: ST7796 #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY) - #define TFT_WIDTH 480 - #define TFT_HEIGHT 320 + #define TFT_RES_480x320 #define TFT_INTERFACE_SPI - #define GRAPHICAL_TFT_UPSCALE 3 #elif ENABLED(MKS_ROBIN_TFT24) // Most common: ST7789 #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y) - #define TFT_WIDTH 320 - #define TFT_HEIGHT 240 + #define TFT_RES_320x240 #define TFT_INTERFACE_FSMC - #define GRAPHICAL_TFT_UPSCALE 2 #elif ENABLED(MKS_ROBIN_TFT28) // Most common: ST7789 #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y) - #define TFT_WIDTH 320 - #define TFT_HEIGHT 240 + #define TFT_RES_320x240 #define TFT_INTERFACE_FSMC - #define GRAPHICAL_TFT_UPSCALE 2 #elif ENABLED(MKS_ROBIN_TFT32) // Most common: ST7789 #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y) - #define TFT_WIDTH 320 - #define TFT_HEIGHT 240 + #define TFT_RES_320x240 #define TFT_INTERFACE_FSMC - #define GRAPHICAL_TFT_UPSCALE 2 #elif ENABLED(MKS_ROBIN_TFT35) // Most common: ILI9488 #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y) - #define TFT_WIDTH 480 - #define TFT_HEIGHT 320 + #define TFT_RES_480x320 #define TFT_INTERFACE_FSMC - #define GRAPHICAL_TFT_UPSCALE 3 #elif ENABLED(MKS_ROBIN_TFT43) #define TFT_DEFAULT_ORIENTATION 0 #define TFT_DRIVER SSD1963 - #define TFT_WIDTH 480 - #define TFT_HEIGHT 272 + #define TFT_RES_480x272 #define TFT_INTERFACE_FSMC - #define GRAPHICAL_TFT_UPSCALE 2 #elif ENABLED(MKS_ROBIN_TFT_V1_1R) // ILI9328 or R61505 - #define TFT_DEFAULT_ORIENTATION (TFT_INVERT_X | TFT_INVERT_Y | TFT_EXCHANGE_XY) - #define TFT_WIDTH 320 - #define TFT_HEIGHT 240 + #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y) + #define TFT_RES_320x240 #define TFT_INTERFACE_FSMC - #define GRAPHICAL_TFT_UPSCALE 2 #elif EITHER(TFT_TRONXY_X5SA, ANYCUBIC_TFT35) #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y) #define TFT_DRIVER ILI9488 - #define TFT_WIDTH 480 - #define TFT_HEIGHT 320 + #define TFT_RES_480x320 #define TFT_INTERFACE_FSMC - #define GRAPHICAL_TFT_UPSCALE 3 #elif ENABLED(LONGER_LK_TFT28) #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y) - #define TFT_WIDTH 320 - #define TFT_HEIGHT 240 + #define TFT_RES_320x240 #define TFT_INTERFACE_FSMC - #define GRAPHICAL_TFT_UPSCALE 2 #elif ENABLED(TFT_GENERIC) #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y) + #if NONE(TFT_RES_320x240, TFT_RES_480x272, TFT_RES_480x320) + #define TFT_RES_320x240 + #endif + #if NONE(TFT_INTERFACE_FSMC, TFT_INTERFACE_SPI) + #define TFT_INTERFACE_SPI + #endif +#endif + +#if ENABLED(TFT_RES_320x240) + #define TFT_WIDTH 320 + #define TFT_HEIGHT 240 + #define GRAPHICAL_TFT_UPSCALE 2 +#elif ENABLED(TFT_RES_480x272) + #define TFT_WIDTH 480 + #define TFT_HEIGHT 272 + #define GRAPHICAL_TFT_UPSCALE 2 +#elif ENABLED(TFT_RES_480x320) + #define TFT_WIDTH 480 + #define TFT_HEIGHT 320 + #define GRAPHICAL_TFT_UPSCALE 3 #endif // FSMC/SPI TFT Panels using standard HAL/tft/tft_(fsmc|spi).h #if ENABLED(TFT_INTERFACE_FSMC) #define HAS_FSMC_TFT 1 #if ENABLED(TFT_CLASSIC_UI) - #define FSMC_GRAPHICAL_TFT + #define HAS_FSMC_GRAPHICAL_TFT 1 #elif ENABLED(TFT_LVGL_UI) - #define TFT_LVGL_UI_FSMC + #define HAS_TFT_LVGL_UI_FSMC 1 #endif #elif ENABLED(TFT_INTERFACE_SPI) #define HAS_SPI_TFT 1 #if ENABLED(TFT_CLASSIC_UI) - #define SPI_GRAPHICAL_TFT + #define HAS_SPI_GRAPHICAL_TFT 1 #elif ENABLED(TFT_LVGL_UI) - #define TFT_LVGL_UI_SPI + #define HAS_TFT_LVGL_UI_SPI 1 #endif #endif diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h index 255470bca6..78c014865c 100644 --- a/Marlin/src/inc/Conditionals_adv.h +++ b/Marlin/src/inc/Conditionals_adv.h @@ -148,7 +148,7 @@ #if ANY(MARLIN_BRICKOUT, MARLIN_INVADERS, MARLIN_SNAKE, MARLIN_MAZE) #define HAS_GAMES 1 - #if (1 < ENABLED(MARLIN_BRICKOUT) + ENABLED(MARLIN_INVADERS) + ENABLED(MARLIN_SNAKE) + ENABLED(MARLIN_MAZE)) + #if MANY(MARLIN_BRICKOUT, MARLIN_INVADERS, MARLIN_SNAKE, MARLIN_MAZE) #define HAS_GAME_MENU 1 #endif #endif @@ -163,7 +163,7 @@ #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) #define HAS_SOFTWARE_ENDSTOPS 1 #endif -#if ANY(EXTENSIBLE_UI, NEWPANEL, EMERGENCY_PARSER, HAS_ADC_BUTTONS, DWIN_CREALITY_LCD) +#if ANY(EXTENSIBLE_UI, IS_NEWPANEL, EMERGENCY_PARSER, HAS_ADC_BUTTONS, DWIN_CREALITY_LCD) #define HAS_RESUME_CONTINUE 1 #endif diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index 798bf009c6..581b36932a 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -383,7 +383,7 @@ #endif -#if ANY(HAS_GRAPHICAL_TFT, LCD_USE_DMA_FSMC, FSMC_GRAPHICAL_TFT, SPI_GRAPHICAL_TFT) || !PIN_EXISTS(SD_DETECT) +#if ANY(HAS_GRAPHICAL_TFT, LCD_USE_DMA_FSMC, HAS_FSMC_GRAPHICAL_TFT, HAS_SPI_GRAPHICAL_TFT) || !PIN_EXISTS(SD_DETECT) #define NO_LCD_REINIT 1 // Suppress LCD re-initialization #endif @@ -2578,7 +2578,7 @@ // Force SDCARD_SORT_ALPHA to be enabled for Graphical LCD on LPC1768 // on boards where SD card and LCD display share the same SPI bus // because of a bug in the shared SPI implementation. (See #8122) -#if defined(TARGET_LPC1768) && ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && (SCK_PIN == LCD_PINS_D4) +#if defined(TARGET_LPC1768) && IS_RRD_FG_SC && (SCK_PIN == LCD_PINS_D4) #define SDCARD_SORT_ALPHA // Keep one directory level in RAM. Changing directory levels // may still glitch the screen, but LCD updates clean it up. #undef SDSORT_LIMIT diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index e4f278b22b..9aea18c2d7 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -702,8 +702,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #elif PROGRESS_MSG_EXPIRE < 0 #error "PROGRESS_MSG_EXPIRE must be greater than or equal to 0." #endif -#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && NONE(HAS_MARLINUI_U8GLIB, HAS_GRAPHICAL_TFT, HAS_MARLINUI_HD44780, EXTENSIBLE_UI) - #error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR, Character LCD, Graphical LCD, TFT, or EXTENSIBLE_UI." +#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) + #if NONE(HAS_MARLINUI_U8GLIB, HAS_GRAPHICAL_TFT, HAS_MARLINUI_HD44780, EXTENSIBLE_UI) + #error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR, Character LCD, Graphical LCD, TFT, or EXTENSIBLE_UI." + #endif #endif #if !HAS_LCD_MENU && ENABLED(SD_REPRINT_LAST_SELECTED_FILE) @@ -843,7 +845,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #error "ADVANCED_PAUSE_FEATURE requires FILAMENT_UNLOAD_PURGE_FEEDRATE. Please add it to Configuration_adv.h." #elif ENABLED(EXTRUDER_RUNOUT_PREVENT) #error "EXTRUDER_RUNOUT_PREVENT is incompatible with ADVANCED_PAUSE_FEATURE." - #elif ENABLED(PARK_HEAD_ON_PAUSE) && NONE(SDSUPPORT, NEWPANEL, EMERGENCY_PARSER) + #elif ENABLED(PARK_HEAD_ON_PAUSE) && NONE(SDSUPPORT, IS_NEWPANEL, EMERGENCY_PARSER) #error "PARK_HEAD_ON_PAUSE requires SDSUPPORT, EMERGENCY_PARSER, or an LCD controller." #elif ENABLED(HOME_BEFORE_FILAMENT_CHANGE) && DISABLED(PAUSE_PARK_NO_STEPPER_TIMEOUT) #error "HOME_BEFORE_FILAMENT_CHANGE requires PAUSE_PARK_NO_STEPPER_TIMEOUT." @@ -1026,15 +1028,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS /** * Special tool-changing options */ -#if 1 < 0 \ - + ENABLED(SINGLENOZZLE) \ - + ENABLED(DUAL_X_CARRIAGE) \ - + ENABLED(PARKING_EXTRUDER) \ - + ENABLED(MAGNETIC_PARKING_EXTRUDER) \ - + ENABLED(SWITCHING_TOOLHEAD) \ - + ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) \ - + ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #error "Please select only one of SINGLENOZZLE, DUAL_X_CARRIAGE, PARKING_EXTRUDER, SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, or ELECTROMAGNETIC_SWITCHING_TOOLHEAD." +#if MANY(SINGLENOZZLE, DUAL_X_CARRIAGE, PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER, SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) + #error "Please select only one of SINGLENOZZLE, DUAL_X_CARRIAGE, PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER, SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, or ELECTROMAGNETIC_SWITCHING_TOOLHEAD." #endif /** @@ -1161,16 +1156,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS /** * Allow only one kinematic type to be defined */ -#if 1 < 0 \ - + ENABLED(DELTA) \ - + ENABLED(MORGAN_SCARA) \ - + ENABLED(COREXY) \ - + ENABLED(COREXZ) \ - + ENABLED(COREYZ) \ - + ENABLED(COREYX) \ - + ENABLED(COREZX) \ - + ENABLED(COREZY) \ - + ENABLED(MARKFORGED_XY) +#if MANY(DELTA, MORGAN_SCARA, COREXY, COREXZ, COREYZ, COREYX, COREZX, COREZY, MARKFORGED_XY) #error "Please enable only one of DELTA, MORGAN_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, COREZY, or MARKFORGED_XY." #endif @@ -1210,18 +1196,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS * Allow only one probe option to be defined */ #if 1 < 0 \ - + ENABLED(PROBE_MANUALLY) \ - + ENABLED(FIX_MOUNTED_PROBE) \ - + ENABLED(NOZZLE_AS_PROBE) \ - + (HAS_Z_SERVO_PROBE && DISABLED(BLTOUCH)) \ - + ENABLED(BLTOUCH) && DISABLED(CREALITY_TOUCH) \ - + ENABLED(CREALITY_TOUCH) \ - + ENABLED(TOUCH_MI_PROBE) \ - + ENABLED(SOLENOID_PROBE) \ - + ENABLED(Z_PROBE_ALLEN_KEY) \ - + ENABLED(Z_PROBE_SLED) \ - + ENABLED(RACK_AND_PINION_PROBE) \ - + ENABLED(SENSORLESS_PROBING) + + (DISABLED(BLTOUCH) && HAS_Z_SERVO_PROBE) \ + + (ENABLED(BLTOUCH) && DISABLED(CREALITY_TOUCH)) \ + + COUNT_ENABLED(PROBE_MANUALLY, FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, CREALITY_TOUCH, TOUCH_MI_PROBE, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, RACK_AND_PINION_PROBE, SENSORLESS_PROBING) #error "Please enable only one probe option: PROBE_MANUALLY, SENSORLESS_PROBING, BLTOUCH, FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, TOUCH_MI_PROBE, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo." #endif @@ -1391,12 +1368,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS /** * Allow only one bed leveling option to be defined */ -#if 1 < 0 \ - + ENABLED(AUTO_BED_LEVELING_LINEAR) \ - + ENABLED(AUTO_BED_LEVELING_3POINT) \ - + ENABLED(AUTO_BED_LEVELING_BILINEAR) \ - + ENABLED(AUTO_BED_LEVELING_UBL) \ - + ENABLED(MESH_BED_LEVELING) +#if MANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL, MESH_BED_LEVELING) #error "Select only one of: MESH_BED_LEVELING, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL." #endif @@ -1558,8 +1530,8 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal /** * ULTIPANEL encoder */ -#if ENABLED(ULTIPANEL) && NONE(NEWPANEL, SR_LCD_2W_NL) && !defined(SHIFT_CLK) - #error "ULTIPANEL requires some kind of encoder." +#if IS_ULTIPANEL && NONE(IS_NEWPANEL, SR_LCD_2W_NL) && !defined(SHIFT_CLK) + #error "ULTIPANEL controllers require some kind of encoder." #endif #if ENCODER_PULSES_PER_STEP < 0 @@ -2237,89 +2209,100 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal * Make sure only one display is enabled */ #if 1 < 0 \ - + (ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(IS_RRD_SC)) \ - + (ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(IS_RRD_FG_SC)) \ - + (ENABLED(ULTRA_LCD) && DISABLED(IS_ULTRA_LCD)) \ + + ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \ + + ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) \ + + ENABLED(ULTIPANEL) \ + + ENABLED(ULTRA_LCD) \ + (ENABLED(U8GLIB_SSD1306) && DISABLED(IS_U8GLIB_SSD1306)) \ + (ENABLED(MINIPANEL) && NONE(MKS_MINI_12864, ENDER2_STOCKDISPLAY)) \ + (ENABLED(MKS_MINI_12864) && DISABLED(MKS_LCD12864)) \ + (ENABLED(EXTENSIBLE_UI) && DISABLED(IS_EXTUI)) \ - + (ENABLED(ULTIPANEL) && DISABLED(IS_ULTIPANEL)) \ - + ENABLED(RADDS_DISPLAY) \ - + ENABLED(ULTIMAKERCONTROLLER) \ - + ENABLED(PANEL_ONE) \ + + (DISABLED(IS_LEGACY_TFT) && ENABLED(TFT_GENERIC)) \ + + (ENABLED(IS_LEGACY_TFT) && COUNT_ENABLED(TFT_320x240, TFT_320x240_SPI, TFT_480x320, TFT_480x320_SPI)) \ + + COUNT_ENABLED(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON, ANYCUBIC_TFT35) \ + + COUNT_ENABLED(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) \ + + COUNT_ENABLED(ENDER2_STOCKDISPLAY, CR10_STOCKDISPLAY, DWIN_CREALITY_LCD) \ + + COUNT_ENABLED(FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1, FYSETC_GENERIC_12864_1_1) \ + + COUNT_ENABLED(LCD_SAINSMART_I2C_1602, LCD_SAINSMART_I2C_2004) \ + + COUNT_ENABLED(MKS_12864OLED, MKS_12864OLED_SSD1306) \ + + COUNT_ENABLED(MKS_TS35_V2_0, MKS_ROBIN_TFT24, MKS_ROBIN_TFT28, MKS_ROBIN_TFT32, MKS_ROBIN_TFT35, MKS_ROBIN_TFT43, MKS_ROBIN_TFT_V1_1R) \ + + COUNT_ENABLED(TFTGLCD_PANEL_SPI, TFTGLCD_PANEL_I2C) \ + + COUNT_ENABLED(VIKI2, miniVIKI) \ + + COUNT_ENABLED(ZONESTAR_12864LCD, ZONESTAR_12864OLED, ZONESTAR_12864OLED_SSD1306) \ + + ENABLED(ANET_FULL_GRAPHICS_LCD) \ + + ENABLED(AZSMZ_12864) \ + + ENABLED(BQ_LCD_SMART_CONTROLLER) \ + + ENABLED(CARTESIO_UI) \ + + ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \ + + ENABLED(FF_INTERFACEBOARD) \ + + ENABLED(FYSETC_242_OLED_12864) \ + ENABLED(G3D_PANEL) \ - + ENABLED(RIGIDBOT_PANEL) \ - + ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) \ - + ENABLED(ZONESTAR_LCD) \ - + ENABLED(RA_CONTROL_PANEL) \ - + ENABLED(LCD_SAINSMART_I2C_1602) \ - + ENABLED(LCD_SAINSMART_I2C_2004) \ - + ENABLED(LCM1602) \ + + ENABLED(LCD_FOR_MELZI) \ + ENABLED(LCD_I2C_PANELOLU2) \ + ENABLED(LCD_I2C_VIKI) \ - + ENABLED(SAV_3DLCD) \ - + ENABLED(FF_INTERFACEBOARD) \ - + ENABLED(REPRAPWORLD_GRAPHICAL_LCD) \ - + ENABLED(VIKI2) \ - + ENABLED(miniVIKI) \ + + ENABLED(LCM1602) \ + + ENABLED(LONGER_LK_TFT28) \ + + ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) \ + ENABLED(MAKRPANEL) \ - + ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \ - + ENABLED(BQ_LCD_SMART_CONTROLLER) \ - + ENABLED(CARTESIO_UI) \ - + ENABLED(LCD_FOR_MELZI) \ - + ENABLED(ULTI_CONTROLLER) \ + + ENABLED(MALYAN_LCD) \ + ENABLED(MKS_LCD12864) \ - + ENABLED(ENDER2_STOCKDISPLAY) \ - + ENABLED(FYSETC_MINI_12864_X_X) \ - + ENABLED(FYSETC_MINI_12864_1_2) \ - + ENABLED(FYSETC_MINI_12864_2_0) \ - + ENABLED(FYSETC_MINI_12864_2_1) \ - + ENABLED(FYSETC_GENERIC_12864_1_1) \ - + ENABLED(CR10_STOCKDISPLAY) \ - + ENABLED(DWIN_CREALITY_LCD) \ - + ENABLED(ANET_FULL_GRAPHICS_LCD) \ - + ENABLED(AZSMZ_12864) \ - + ENABLED(SILVER_GATE_GLCD_CONTROLLER) \ - + ENABLED(SAV_3DGLCD) \ + ENABLED(OLED_PANEL_TINYBOY2) \ - + ENABLED(MKS_12864OLED) \ - + ENABLED(MKS_12864OLED_SSD1306) \ - + ENABLED(ZONESTAR_12864LCD) \ - + ENABLED(ZONESTAR_12864OLED) \ - + ENABLED(ZONESTAR_12864OLED_SSD1306) \ - + ENABLED(U8GLIB_SH1106_EINSTART) \ + ENABLED(OVERLORD_OLED) \ - + ENABLED(FYSETC_242_OLED_12864) \ - + ENABLED(DGUS_LCD_UI_ORIGIN) \ - + ENABLED(DGUS_LCD_UI_FYSETC) \ - + ENABLED(DGUS_LCD_UI_HIPRECY) \ - + ENABLED(MALYAN_LCD) \ + + ENABLED(PANEL_ONE) \ + + ENABLED(RA_CONTROL_PANEL) \ + + ENABLED(RADDS_DISPLAY) \ + + ENABLED(REPRAPWORLD_GRAPHICAL_LCD) \ + + ENABLED(RIGIDBOT_PANEL) \ + + ENABLED(SAV_3DGLCD) \ + + ENABLED(SAV_3DLCD) \ + + ENABLED(SILVER_GATE_GLCD_CONTROLLER) \ + + ENABLED(TFT_TRONXY_X5SA) \ + ENABLED(TOUCH_UI_FTDI_EVE) \ - + ENABLED(TFT_320x240) \ - + ENABLED(TFT_320x240_SPI) \ - + ENABLED(FSMC_GRAPHICAL_TFT) \ - + ENABLED(TFT_LVGL_UI_FSMC) \ - + ENABLED(TFT_LVGL_UI_SPI) \ - + ENABLED(ANYCUBIC_LCD_I3MEGA) \ - + ENABLED(ANYCUBIC_LCD_CHIRON) \ - + ENABLED(TFTGLCD_PANEL_SPI) \ - + ENABLED(TFTGLCD_PANEL_I2C) + + ENABLED(U8GLIB_SH1106_EINSTART) \ + + ENABLED(ULTI_CONTROLLER) \ + + ENABLED(ULTIMAKERCONTROLLER) \ + + ENABLED(ZONESTAR_LCD) #error "Please select only one LCD controller option." #endif -#undef IS_RRD_SC -#undef IS_RRD_FG_SC -#undef IS_ULTRA_LCD #undef IS_U8GLIB_SSD1306 -#undef IS_RRW_KEYPAD #undef IS_EXTUI -#undef IS_ULTIPANEL +#undef IS_LEGACY_TFT + +#if ANY(TFT_GENERIC, MKS_TS35_V2_0, MKS_ROBIN_TFT24, MKS_ROBIN_TFT28, MKS_ROBIN_TFT32, MKS_ROBIN_TFT35, MKS_ROBIN_TFT43, MKS_ROBIN_TFT_V1_1R, TFT_TRONXY_X5SA, ANYCUBIC_TFT35, ANYCUBIC_TFT35, LONGER_LK_TFT28) + #if NONE(TFT_COLOR_UI, TFT_CLASSIC_UI, TFT_LVGL_UI) + #error "TFT_COLOR_UI, TFT_CLASSIC_UI, TFT_LVGL_UI is required for your TFT. Please enable one." + #elif 1 < ENABLED(TFT_COLOR_UI) + ENABLED(TFT_CLASSIC_UI) + ENABLED(TFT_LVGL_UI) + #error "Please select only one of TFT_COLOR_UI, TFT_CLASSIC_UI, or TFT_LVGL_UI." + #endif +#elif ANY(TFT_COLOR_UI, TFT_CLASSIC_UI, TFT_LVGL_UI) + #error "TFT_(COLOR|CLASSIC|LVGL)_UI requires a TFT display to be enabled." +#endif + +#if ENABLED(TFT_GENERIC) && NONE(TFT_INTERFACE_FSMC, TFT_INTERFACE_SPI) + #error "TFT_GENERIC requires either TFT_INTERFACE_FSMC or TFT_INTERFACE_SPI interface." +#endif -#if 1 < ENABLED(LCD_SCREEN_ROT_0) + ENABLED(LCD_SCREEN_ROT_90) + ENABLED(LCD_SCREEN_ROT_180) + ENABLED(LCD_SCREEN_ROT_270) +#if BOTH(TFT_INTERFACE_FSMC, TFT_INTERFACE_SPI) + #error "Please enable only one of TFT_INTERFACE_SPI or TFT_INTERFACE_SPI." +#endif + +#if MANY(LCD_SCREEN_ROT_0, LCD_SCREEN_ROT_90, LCD_SCREEN_ROT_180, LCD_SCREEN_ROT_270) #error "Please enable only one LCD_SCREEN_ROT_* option: 0, 90, 180, or 270." #endif +#if MANY(TFT_RES_320x240, TFT_RES_480x272, TFT_RES_480x320) + #error "Please select only one of TFT_RES_480x320, TFT_RES_480x320, or TFT_RES_480x272." +#endif + +#if HAS_TFT_LVGL_UI && DISABLED(TFT_RES_480x320) + #error "(FMSC|SPI)TFT_LVGL_UI requires TFT_RES_480x320." +#endif + +#if defined(GRAPHICAL_TFT_UPSCALE) && !WITHIN(GRAPHICAL_TFT_UPSCALE, 2, 3) + #error "GRAPHICAL_TFT_UPSCALE must be set to 2 or 3." +#endif + /** * Serial displays require a dedicated serial port */ @@ -2756,7 +2739,7 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2) #error "BLOCK_BUFFER_SIZE must be a power of 2." #endif -#if ENABLED(LED_CONTROL_MENU) && DISABLED(ULTIPANEL) +#if ENABLED(LED_CONTROL_MENU) && !IS_ULTIPANEL #error "LED_CONTROL_MENU requires an LCD controller." #endif diff --git a/Marlin/src/inc/Version.h b/Marlin/src/inc/Version.h index 7b6a13bc56..0cea923f6a 100644 --- a/Marlin/src/inc/Version.h +++ b/Marlin/src/inc/Version.h @@ -52,7 +52,7 @@ * to alert users to major changes. */ -#define MARLIN_HEX_VERSION 020007 +#define MARLIN_HEX_VERSION 020008 #ifndef REQUIRED_CONFIGURATION_H_VERSION #define REQUIRED_CONFIGURATION_H_VERSION MARLIN_HEX_VERSION #endif diff --git a/Marlin/src/lcd/TFTGLCD/ultralcd_TFTGLCD.cpp b/Marlin/src/lcd/TFTGLCD/ultralcd_TFTGLCD.cpp index b5789091dc..4aa6bcd485 100644 --- a/Marlin/src/lcd/TFTGLCD/ultralcd_TFTGLCD.cpp +++ b/Marlin/src/lcd/TFTGLCD/ultralcd_TFTGLCD.cpp @@ -28,7 +28,7 @@ * ultralcd_TFTGLCD.cpp * * Implementation of the LCD display routines for a TFT GLCD displays with external controller. - * This display looks as a REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER but has good text font + * This display looks like a REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER but has good text font * and supports color output. */ diff --git a/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h b/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h index da7d4f6f1e..535502f2e1 100644 --- a/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h +++ b/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h @@ -112,7 +112,7 @@ #ifndef U8G_COM_SSD_I2C_HAL #define U8G_COM_SSD_I2C_HAL u8g_com_null_fn #endif -#if EITHER(FSMC_GRAPHICAL_TFT, SPI_GRAPHICAL_TFT) +#if HAS_FSMC_GRAPHICAL_TFT || HAS_SPI_GRAPHICAL_TFT uint8_t u8g_com_hal_tft_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr); #define U8G_COM_HAL_TFT_FN u8g_com_hal_tft_fn #else diff --git a/Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp b/Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp index d18b617987..fa9e006744 100644 --- a/Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp +++ b/Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp @@ -55,7 +55,7 @@ #include "../../inc/MarlinConfig.h" -#if HAS_MARLINUI_U8GLIB && (PIN_EXISTS(FSMC_CS) || ENABLED(SPI_GRAPHICAL_TFT)) +#if HAS_MARLINUI_U8GLIB && (PIN_EXISTS(FSMC_CS) || HAS_SPI_GRAPHICAL_TFT) #include "HAL_LCD_com_defines.h" #include "ultralcd_DOGM.h" @@ -477,4 +477,4 @@ uint8_t u8g_com_hal_tft_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_p U8G_PB_DEV(u8g_dev_tft_320x240_upscale_from_128x64, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_tft_320x240_upscale_from_128x64_fn, U8G_COM_HAL_TFT_FN); -#endif // HAS_MARLINUI_U8GLIB && FSMC_CS +#endif // HAS_MARLINUI_U8GLIB && (FSMC_CS_PIN || HAS_SPI_GRAPHICAL_TFT) diff --git a/Marlin/src/lcd/dogm/ultralcd_DOGM.h b/Marlin/src/lcd/dogm/ultralcd_DOGM.h index 228cee6848..b0db727f09 100644 --- a/Marlin/src/lcd/dogm/ultralcd_DOGM.h +++ b/Marlin/src/lcd/dogm/ultralcd_DOGM.h @@ -189,7 +189,7 @@ // Unspecified 320x240 TFT pre-initialized by built-in bootloader #define U8G_CLASS U8GLIB_TFT_320X240_UPSCALE_FROM_128X64 - #if ENABLED(FSMC_GRAPHICAL_TFT) + #if HAS_FSMC_GRAPHICAL_TFT #define U8G_PARAM FSMC_CS_PIN, FSMC_RS_PIN #else #define U8G_PARAM -1, -1 diff --git a/Marlin/src/lcd/extui/lib/mks_ui/draw_print_file.cpp b/Marlin/src/lcd/extui/lib/mks_ui/draw_print_file.cpp index 6d7b68af42..e84bb395e0 100644 --- a/Marlin/src/lcd/extui/lib/mks_ui/draw_print_file.cpp +++ b/Marlin/src/lcd/extui/lib/mks_ui/draw_print_file.cpp @@ -520,7 +520,7 @@ void lv_gcode_file_read(uint8_t *data_buf) { j = 0; ignore_start = false; } - #if ENABLED(TFT_LVGL_UI_SPI) + #if HAS_TFT_LVGL_UI_SPI for (i = 0; i < 200;) { p_index = (uint16_t *)(&public_buf[i]); @@ -529,7 +529,7 @@ void lv_gcode_file_read(uint8_t *data_buf) { i += 2; if (*p_index == 0x0000) *p_index = LV_COLOR_BACKGROUND.full; } - #else + #else // !HAS_TFT_LVGL_UI_SPI for (i = 0; i < 200;) { p_index = (uint16_t *)(&public_buf[i]); //Color = (*p_index >> 8); @@ -537,7 +537,7 @@ void lv_gcode_file_read(uint8_t *data_buf) { i += 2; if (*p_index == 0x0000) *p_index = LV_COLOR_BACKGROUND.full; // 0x18C3; } - #endif // TFT_LVGL_UI_SPI + #endif // !HAS_TFT_LVGL_UI_SPI memcpy(data_buf, public_buf, 200); #endif // SDSUPPORT } diff --git a/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.cpp b/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.cpp index d600b09a5f..519fae2f39 100644 --- a/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.cpp +++ b/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.cpp @@ -751,7 +751,7 @@ char *creat_title_text() { card.openFileRead(cur_name); card.setIndex((PREVIEW_LITTLE_PIC_SIZE + To_pre_view) + size * row + 8); - #if ENABLED(TFT_LVGL_UI_SPI) + #if HAS_TFT_LVGL_UI_SPI SPI_TFT.setWindow(xpos_pixel, ypos_pixel + row, 200, 1); #else LCD_setWindowArea(xpos_pixel, ypos_pixel + row, 200, 1); @@ -782,7 +782,7 @@ char *creat_title_text() { //#endif } - #if ENABLED(TFT_LVGL_UI_SPI) + #if HAS_TFT_LVGL_UI_SPI for (i = 0; i < 400;) { p_index = (uint16_t *)(&bmp_public_buf[i]); diff --git a/Marlin/src/lcd/scaled_tft.h b/Marlin/src/lcd/scaled_tft.h index 2c05e5f26d..54bf6f8d13 100644 --- a/Marlin/src/lcd/scaled_tft.h +++ b/Marlin/src/lcd/scaled_tft.h @@ -49,7 +49,7 @@ #define TFT_PIXEL_OFFSET_X 48 #endif #endif + #ifndef TFT_PIXEL_OFFSET_Y - // 32 is better for both 320x240 and 480x320 - #define TFT_PIXEL_OFFSET_Y 32 + #define TFT_PIXEL_OFFSET_Y 32 // 32 is best for both 320x240 and 480x320 #endif diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp index 7003d13fdd..da9c3e2456 100644 --- a/Marlin/src/lcd/ultralcd.cpp +++ b/Marlin/src/lcd/ultralcd.cpp @@ -400,7 +400,7 @@ bool MarlinUI::get_blink() { ///////////// Keypad Handling ////////////// //////////////////////////////////////////// -#if BOTH(REPRAPWORLD_KEYPAD, HAS_ENCODER_ACTION) +#if IS_RRW_KEYPAD && HAS_ENCODER_ACTION volatile uint8_t MarlinUI::keypad_buttons; @@ -432,7 +432,7 @@ bool MarlinUI::get_blink() { #if HAS_ENCODER_ACTION refresh(LCDVIEW_REDRAW_NOW); #if HAS_LCD_MENU - if (encoderDirection == -(ENCODERBASE)) { // ADC_KEYPAD forces REVERSE_MENU_DIRECTION, so this indicates menu navigation + if (encoderDirection == -(ENCODERBASE)) { // HAS_ADC_BUTTONS forces REVERSE_MENU_DIRECTION, so this indicates menu navigation if (RRK(EN_KEYPAD_UP)) encoderPosition += ENCODER_STEPS_PER_MENU_ITEM; else if (RRK(EN_KEYPAD_DOWN)) encoderPosition -= ENCODER_STEPS_PER_MENU_ITEM; else if (RRK(EN_KEYPAD_LEFT)) { MenuItem_back::action(); quick_feedback(); } @@ -497,12 +497,12 @@ bool MarlinUI::get_blink() { return true; } - #endif // !ADC_KEYPAD + #endif // !HAS_ADC_BUTTONS return false; } -#endif // REPRAPWORLD_KEYPAD +#endif // IS_RRW_KEYPAD && HAS_ENCODER_ACTION /** * Status Screen diff --git a/Marlin/src/lcd/ultralcd.h b/Marlin/src/lcd/ultralcd.h index c7ef41596d..bf9e47e0c8 100644 --- a/Marlin/src/lcd/ultralcd.h +++ b/Marlin/src/lcd/ultralcd.h @@ -34,13 +34,13 @@ #if EITHER(HAS_LCD_MENU, ULTIPANEL_FEEDMULTIPLY) #define HAS_ENCODER_ACTION 1 #endif -#if ((!HAS_ADC_BUTTONS && ENABLED(NEWPANEL)) || BUTTONS_EXIST(EN1, EN2)) && !IS_TFTGLCD_PANEL +#if ((!HAS_ADC_BUTTONS && IS_NEWPANEL) || BUTTONS_EXIST(EN1, EN2)) && !IS_TFTGLCD_PANEL #define HAS_ENCODER_WHEEL 1 #endif #if HAS_ENCODER_WHEEL || ANY_BUTTON(ENC, BACK, UP, DWN, LFT, RT) #define HAS_DIGITAL_BUTTONS 1 #endif -#if !HAS_ADC_BUTTONS && (ENABLED(REPRAPWORLD_KEYPAD) || (HAS_WIRED_LCD && DISABLED(NEWPANEL))) +#if !HAS_ADC_BUTTONS && (IS_RRW_KEYPAD || (HAS_WIRED_LCD && !IS_NEWPANEL)) #define HAS_SHIFT_ENCODER 1 #endif @@ -106,8 +106,7 @@ #endif // HAS_WIRED_LCD -// REPRAPWORLD_KEYPAD (and ADC_KEYPAD) -#if ENABLED(REPRAPWORLD_KEYPAD) +#if IS_RRW_KEYPAD #define BTN_OFFSET 0 // Bit offset into buttons for shift register values #define BLEN_KEYPAD_F3 0 @@ -136,7 +135,7 @@ #define BUTTON_CLICK() RRK(EN_KEYPAD_MIDDLE) #endif -#endif +#endif // IS_RRW_KEYPAD #if HAS_DIGITAL_BUTTONS @@ -633,7 +632,7 @@ public: #if HAS_ENCODER_ACTION static volatile uint8_t buttons; - #if ENABLED(REPRAPWORLD_KEYPAD) + #if IS_RRW_KEYPAD static volatile uint8_t keypad_buttons; static bool handle_keypad(); #endif diff --git a/Marlin/src/pins/esp32/pins_MRR_ESPE.h b/Marlin/src/pins/esp32/pins_MRR_ESPE.h index 95f761f26a..d22a82d7a4 100644 --- a/Marlin/src/pins/esp32/pins_MRR_ESPE.h +++ b/Marlin/src/pins/esp32/pins_MRR_ESPE.h @@ -134,7 +134,7 @@ #define BEEPER_PIN 151 - #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #elif IS_RRD_FG_SC #define BEEPER_PIN 151 diff --git a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h index 002d2ebd9c..ce2ee2579a 100644 --- a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h +++ b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h @@ -400,7 +400,7 @@ #define LCD_PINS_ENABLE 51 // SID (MOSI) #define LCD_PINS_D4 52 // SCK (CLK) clock - #elif BOTH(NEWPANEL, PANEL_ONE) + #elif BOTH(IS_NEWPANEL, PANEL_ONE) #define LCD_PINS_RS 40 #define LCD_PINS_ENABLE 42 @@ -417,7 +417,7 @@ #define LCD_PINS_ENABLE 29 #define LCD_PINS_D4 25 - #if DISABLED(NEWPANEL) + #if !IS_NEWPANEL #define BEEPER_PIN 37 #endif @@ -450,13 +450,13 @@ #define LCD_PINS_D7 29 - #if DISABLED(NEWPANEL) + #if !IS_NEWPANEL #define BEEPER_PIN 33 #endif #endif - #if DISABLED(NEWPANEL) + #if !IS_NEWPANEL // Buttons attached to a shift register // Not wired yet //#define SHIFT_CLK 38 @@ -470,7 +470,7 @@ // // LCD Display input pins // - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) @@ -607,7 +607,7 @@ #define BEEPER_PIN 33 // Buttons are directly attached to AUX-2 - #if ENABLED(REPRAPWORLD_KEYPAD) + #if IS_RRW_KEYPAD #define SHIFT_OUT 40 #define SHIFT_CLK 44 #define SHIFT_LD 42 @@ -630,6 +630,6 @@ #endif #endif - #endif // NEWPANEL + #endif // IS_NEWPANEL #endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h index df182049f9..8c1c124d90 100644 --- a/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h +++ b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h @@ -138,8 +138,8 @@ #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 - #if BOTH(HAS_MARLINUI_HD44780, REPRAP_DISCOUNT_SMART_CONTROLLER) - #error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU B300 v1.0" + #if BOTH(HAS_MARLINUI_HD44780, IS_RRD_SC) + #error "REPRAP_DISCOUNT_SMART_CONTROLLER displays aren't supported by the BIQU B300 v1.0" #endif #if ENABLED(SDSUPPORT) diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h index bcff04eb85..d92d5e578f 100644 --- a/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h +++ b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h @@ -109,8 +109,8 @@ #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 - #if BOTH(HAS_MARLINUI_HD44780, REPRAP_DISCOUNT_SMART_CONTROLLER) - #error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU BQ111-A4" + #if BOTH(HAS_MARLINUI_HD44780, IS_RRD_SC) + #error "REPRAP_DISCOUNT_SMART_CONTROLLER displays aren't supported by the BIQU BQ111-A4" #endif #if ENABLED(SDSUPPORT) diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h index 31373fedff..51e48fc8e9 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h @@ -348,7 +348,7 @@ #define LCD_BACKLIGHT_PIN -1 #endif - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 EXPA1_05_PIN #define LCD_PINS_D6 EXPA1_04_PIN #define LCD_PINS_D7 EXPA1_03_PIN diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h index 4686e984b0..f2afc23bc2 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h @@ -293,9 +293,6 @@ #define TOUCH_BUTTONS_HW_SPI #define TOUCH_BUTTONS_HW_SPI_DEVICE 1 - #ifndef GRAPHICAL_TFT_UPSCALE - #define GRAPHICAL_TFT_UPSCALE 3 - #endif // SPI 1 #define SCK_PIN P0_15 #define MISO_PIN P0_17 @@ -398,7 +395,7 @@ #define FORCE_SOFT_SPI #endif - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 P1_21 #define LCD_PINS_D6 P1_22 #define LCD_PINS_D7 P1_23 diff --git a/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h b/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h index 5132081a55..3562619f5c 100644 --- a/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h +++ b/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h @@ -125,7 +125,7 @@ // // LCD // -#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) +#if IS_RRD_SC #define BEEPER_PIN P0_19 #define BTN_EN1 P1_23 #define BTN_EN2 P1_24 diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h index 6c6a9ea306..2430958895 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h @@ -147,7 +147,7 @@ // // Ethernet pins // -#ifndef ULTIPANEL +#if !IS_ULTIPANEL #define ENET_MDIO P1_17 // J12-4 #define ENET_RX_ER P1_14 // J12-6 #define ENET_RXD1 P1_10 // J12-8 diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h index d269ecbdc9..0a8f3a6da8 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h @@ -319,7 +319,7 @@ #define DOGLCD_A0 P1_00 #endif - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 P0_17 #define LCD_PINS_D6 P1_00 #define LCD_PINS_D7 P1_22 diff --git a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h index 294e7527a8..674bd6b0ff 100644 --- a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h +++ b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h @@ -357,8 +357,8 @@ #define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4 #define LCD_SDSS P1_23 // (53) J3-5 & AUX-3 - #if ENABLED(NEWPANEL) - #if ENABLED(REPRAPWORLD_KEYPAD) + #if IS_NEWPANEL + #if IS_RRW_KEYPAD #define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3 #define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3 #define SHIFT_LD P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant) @@ -416,7 +416,7 @@ #define LCD_BACKLIGHT_PIN P0_16 //(16) J3-7 & AUX-4 - only used on DOGLCD controllers #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3 #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3 - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 P1_17 // (71) ENET_MDIO #define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER #define LCD_PINS_D7 P1_10 // (75) ENET_RXD1 @@ -436,7 +436,7 @@ // // Ethernet pins // -#if DISABLED(ULTIPANEL) +#if !IS_ULTIPANEL #define ENET_MDIO P1_17 // (71) J12-4 #define ENET_RX_ER P1_14 // (73) J12-6 #define ENET_RXD1 P1_10 // (75) J12-8 diff --git a/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h b/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h index f9b9db918d..4e3b2ef425 100644 --- a/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h +++ b/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h @@ -96,7 +96,7 @@ // Display // -#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) +#if IS_RRD_FG_SC #define LCD_PINS_RS P0_16 #define LCD_PINS_ENABLE P0_18 #define LCD_PINS_D4 P0_15 @@ -110,4 +110,4 @@ #define BTN_ENC P1_30 #define SD_DETECT_PIN -1 -#endif // REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#endif // IS_RRD_FG_SC diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h index 6331d6aa7c..ad792447ea 100644 --- a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h +++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h @@ -144,11 +144,11 @@ #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 - #if ENABLED(REPRAPWORLD_KEYPAD) + #if IS_RRW_KEYPAD #define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3 #define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3 #define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3 - #elif DISABLED(NEWPANEL) + #elif !IS_NEWPANEL //#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4 //#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4 //#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4 @@ -166,7 +166,7 @@ #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes #else - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 P1_17 // (71) ENET_MDIO #define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER #define LCD_PINS_D7 P1_10 // (75) ENET_RXD1 diff --git a/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h b/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h index 62660935f5..e18f938dc4 100644 --- a/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h +++ b/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h @@ -325,7 +325,7 @@ #define DOGLCD_A0 P1_00 #endif - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 P0_17 #define LCD_PINS_D6 P1_00 #define LCD_PINS_D7 P1_22 diff --git a/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h index f2811b14ab..3c47a70101 100644 --- a/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h +++ b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h @@ -138,7 +138,7 @@ * http://chibidibidiwah.wdfiles.com/local--files/panel/smoothieboard2sd.jpg * http://smoothieware.org/panel */ - #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #if IS_RRD_FG_SC // EXP1 Pins #define BEEPER_PIN P1_31 // EXP1 Pin 1 #define BTN_ENC P1_30 // EXP1 Pin 2 diff --git a/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h b/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h index 3a84f4395f..af9f683c7d 100644 --- a/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h +++ b/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h @@ -129,7 +129,7 @@ #define SD_DETECT_PIN 49 #endif -#if ENABLED(NEWPANEL) +#if IS_NEWPANEL #define BTN_EN1 11 #define BTN_EN2 12 #define BTN_ENC 43 diff --git a/Marlin/src/pins/mega/pins_GT2560_REV_A.h b/Marlin/src/pins/mega/pins_GT2560_REV_A.h index 2fe9a43ba1..f481db2b96 100644 --- a/Marlin/src/pins/mega/pins_GT2560_REV_A.h +++ b/Marlin/src/pins/mega/pins_GT2560_REV_A.h @@ -109,7 +109,7 @@ #define BEEPER_PIN 18 - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL #if ENABLED(MKS_MINI_12864) #define DOGLCD_A0 5 @@ -130,7 +130,7 @@ #define BTN_ENC 19 #define SD_DETECT_PIN 38 - #else // !NEWPANEL + #else // !IS_NEWPANEL #define SHIFT_CLK 38 #define SHIFT_LD 42 @@ -146,6 +146,6 @@ #define SD_DETECT_PIN -1 - #endif // !NEWPANEL + #endif // !IS_NEWPANEL #endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/mega/pins_GT2560_V3.h b/Marlin/src/pins/mega/pins_GT2560_V3.h index d71a195419..606debd1b0 100644 --- a/Marlin/src/pins/mega/pins_GT2560_V3.h +++ b/Marlin/src/pins/mega/pins_GT2560_V3.h @@ -172,7 +172,7 @@ #define LCD_PINS_D7 36 #endif -#if ENABLED(NEWPANEL) +#if IS_NEWPANEL #ifndef BTN_EN1 #define BTN_EN1 42 #endif diff --git a/Marlin/src/pins/mega/pins_GT2560_V3_A20.h b/Marlin/src/pins/mega/pins_GT2560_V3_A20.h index e1956488c6..20cccf148f 100644 --- a/Marlin/src/pins/mega/pins_GT2560_V3_A20.h +++ b/Marlin/src/pins/mega/pins_GT2560_V3_A20.h @@ -32,7 +32,7 @@ #define SPEAKER // The speaker can produce tones -#if ENABLED(NEWPANEL) +#if IS_NEWPANEL #define BTN_EN1 16 #define BTN_EN2 17 #define BTN_ENC 19 diff --git a/Marlin/src/pins/mega/pins_HJC2560C_REV2.h b/Marlin/src/pins/mega/pins_HJC2560C_REV2.h index e30a65b90e..fa2027fb78 100644 --- a/Marlin/src/pins/mega/pins_HJC2560C_REV2.h +++ b/Marlin/src/pins/mega/pins_HJC2560C_REV2.h @@ -127,7 +127,7 @@ #define BEEPER_PIN 18 - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL #define LCD_PINS_RS 20 // LCD_CS #define LCD_PINS_ENABLE 15 // LCD_SDA @@ -168,6 +168,6 @@ #define LCD_PINS_D6 20 #define LCD_PINS_D7 19 - #endif // !NEWPANEL + #endif // !IS_NEWPANEL #endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS.h b/Marlin/src/pins/mega/pins_MEGATRONICS.h index 1c37b21ab7..f813366a14 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS.h @@ -108,7 +108,7 @@ // #define BEEPER_PIN 33 -#if BOTH(ULTRA_LCD, NEWPANEL) +#if IS_ULTRA_LCD && IS_NEWPANEL #define LCD_PINS_RS 16 #define LCD_PINS_ENABLE 17 @@ -124,7 +124,7 @@ #define SD_DETECT_PIN -1 // RAMPS doesn't use this -#endif // ULTRA_LCD && NEWPANEL +#endif // IS_ULTRA_LCD && IS_NEWPANEL // // M3/M4/M5 - Spindle/Laser Control diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h index ff7cf15714..67ec24ed6f 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h @@ -139,7 +139,7 @@ #define LCD_PINS_D6 32 #define LCD_PINS_D7 33 - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL // Buttons are directly attached using keypad #define BTN_EN1 61 #define BTN_EN2 59 diff --git a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h index 963911ec5d..d074db8b25 100644 --- a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h +++ b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h @@ -214,7 +214,7 @@ // #if HAS_WIRED_LCD - #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #if IS_RRD_FG_SC #define LCD_PINS_RS 33 // C4: LCD-STROBE #define LCD_PINS_ENABLE 72 // J2: LEFT diff --git a/Marlin/src/pins/mega/pins_OVERLORD.h b/Marlin/src/pins/mega/pins_OVERLORD.h index 045c1bc0fa..18bb1f27bf 100644 --- a/Marlin/src/pins/mega/pins_OVERLORD.h +++ b/Marlin/src/pins/mega/pins_OVERLORD.h @@ -132,7 +132,7 @@ #endif #endif -#if ENABLED(NEWPANEL) +#if IS_NEWPANEL #define BTN_ENC 16 // Enter Pin #define BTN_UP 19 // Button UP Pin #define BTN_DWN 17 // Button DOWN Pin diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index c5dbd20876..bd85c44899 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -49,7 +49,9 @@ #define IS_RAMPS_SF #endif -#define HAS_FREE_AUX2_PINS !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD)) +#if !(BOTH(IS_ULTRA_LCD, IS_NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD)) + #define HAS_FREE_AUX2_PINS 1 +#endif // Test the target within the included pins file #ifdef __MARLIN_DEPS__ diff --git a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h index 2ea15c97d3..c2cc24943a 100644 --- a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h +++ b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h @@ -164,7 +164,7 @@ #define KILL_PIN 32 - #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL + #if IS_ULTIPANEL || TOUCH_UI_ULTIPANEL #if ENABLED(CR10_STOCKDISPLAY) #define LCD_PINS_RS 85 @@ -187,5 +187,5 @@ #define BEEPER_PIN 84 // AUX-4 #define SD_DETECT_PIN 15 - #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL + #endif // IS_ULTIPANEL || TOUCH_UI_ULTIPANEL #endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/rambo/pins_EINSY_RETRO.h b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h index 4a1bf70b6e..7e53246181 100644 --- a/Marlin/src/pins/rambo/pins_EINSY_RETRO.h +++ b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h @@ -170,7 +170,7 @@ #define KILL_PIN 32 - #if ANY(ULTIPANEL, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE) + #if ANY(IS_ULTIPANEL, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE) #if ENABLED(CR10_STOCKDISPLAY) #define LCD_PINS_RS 85 @@ -194,6 +194,6 @@ #define SD_DETECT_PIN 15 - #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE + #endif // IS_ULTIPANEL || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE #endif // HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE diff --git a/Marlin/src/pins/rambo/pins_MINIRAMBO.h b/Marlin/src/pins/rambo/pins_MINIRAMBO.h index 6314bc07b8..8b034820cf 100644 --- a/Marlin/src/pins/rambo/pins_MINIRAMBO.h +++ b/Marlin/src/pins/rambo/pins_MINIRAMBO.h @@ -147,7 +147,7 @@ #define KILL_PIN 32 #endif - #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL + #if IS_ULTIPANEL || TOUCH_UI_ULTIPANEL #if MB(MINIRAMBO_10A) @@ -187,6 +187,6 @@ #endif // !MINIRAMBO_10A - #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL + #endif // IS_ULTIPANEL || TOUCH_UI_ULTIPANEL #endif // HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL diff --git a/Marlin/src/pins/rambo/pins_RAMBO.h b/Marlin/src/pins/rambo/pins_RAMBO.h index 735852b2ff..0254edea26 100644 --- a/Marlin/src/pins/rambo/pins_RAMBO.h +++ b/Marlin/src/pins/rambo/pins_RAMBO.h @@ -187,7 +187,7 @@ #define KILL_PIN 80 - #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL + #if IS_ULTIPANEL || TOUCH_UI_ULTIPANEL #define LCD_PINS_RS 70 #define LCD_PINS_ENABLE 71 @@ -228,7 +228,7 @@ #endif // !VIKI2 && !miniVIKI - #else // !NEWPANEL - old style panel with shift register + #else // !IS_NEWPANEL - old style panel with shift register // No Beeper added #define BEEPER_PIN 33 @@ -247,6 +247,6 @@ #define LCD_PINS_D6 27 #define LCD_PINS_D7 29 - #endif // !NEWPANEL + #endif // !IS_NEWPANEL #endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/ramps/pins_3DRAG.h b/Marlin/src/pins/ramps/pins_3DRAG.h index f0057e1fc9..b7f0517aac 100644 --- a/Marlin/src/pins/ramps/pins_3DRAG.h +++ b/Marlin/src/pins/ramps/pins_3DRAG.h @@ -78,7 +78,7 @@ // // LCD / Controller // -#if BOTH(ULTRA_LCD, NEWPANEL) +#if IS_ULTRA_LCD && IS_NEWPANEL #undef BEEPER_PIN #undef LCD_PINS_RS @@ -106,7 +106,7 @@ #define BEEPER_PIN 33 -#endif // ULTRA_LCD && NEWPANEL +#endif // IS_ULTRA_LCD && IS_NEWPANEL /** * M3/M4/M5 - Spindle/Laser Control @@ -157,7 +157,7 @@ #define SPINDLE_LASER_PWM_PIN 46 // Hardware PWM #define SPINDLE_LASER_ENA_PIN 62 // Pullup! #define SPINDLE_DIR_PIN 48 - #elif !BOTH(ULTRA_LCD, NEWPANEL) // use expansion header if no LCD in use + #elif !BOTH(IS_ULTRA_LCD, IS_NEWPANEL) // use expansion header if no LCD in use #define SPINDLE_LASER_ENA_PIN 16 // Pullup or pulldown! #define SPINDLE_DIR_PIN 17 #endif diff --git a/Marlin/src/pins/ramps/pins_FELIX2.h b/Marlin/src/pins/ramps/pins_FELIX2.h index 6cc6997adc..e572d3f286 100644 --- a/Marlin/src/pins/ramps/pins_FELIX2.h +++ b/Marlin/src/pins/ramps/pins_FELIX2.h @@ -49,11 +49,11 @@ // // LCD / Controller // -#if BOTH(ULTRA_LCD, NEWPANEL) +#if IS_ULTRA_LCD && IS_NEWPANEL #define SD_DETECT_PIN 6 -#endif // NEWPANEL && ULTRA_LCD +#endif // // M3/M4/M5 - Spindle/Laser Control diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h index 0877d168d6..5b724787e9 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h @@ -181,7 +181,7 @@ // // Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER // -#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) +#if IS_RRD_SC #define BEEPER_PIN 37 #define BTN_EN1 31 #define BTN_EN2 33 diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h b/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h index 75a219c177..81b6ea16d7 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h @@ -175,7 +175,7 @@ // // Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER // -#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) +#if IS_RRD_SC #ifndef BEEPER_PIN #define BEEPER_PIN 37 #endif diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h b/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h index 0470fc47e9..a97b0d2d12 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h @@ -155,7 +155,7 @@ // // Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER // -#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) +#if IS_RRD_SC #define LCD_PINS_RS 16 #define LCD_PINS_ENABLE 17 #define LCD_PINS_D4 23 diff --git a/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h index 3fa3cc9e8c..9e4ee10096 100644 --- a/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h +++ b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h @@ -277,7 +277,7 @@ #endif - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL #define BTN_EN1 31 #define BTN_EN2 33 #define BTN_ENC 35 diff --git a/Marlin/src/pins/ramps/pins_K8600.h b/Marlin/src/pins/ramps/pins_K8600.h index 0de0192752..60bb18204a 100644 --- a/Marlin/src/pins/ramps/pins_K8600.h +++ b/Marlin/src/pins/ramps/pins_K8600.h @@ -96,7 +96,7 @@ // // LCD / Controller // -#if BOTH(ULTRA_LCD, NEWPANEL) +#if IS_ULTRA_LCD && IS_NEWPANEL #undef BEEPER_PIN #undef LCD_PINS_RS diff --git a/Marlin/src/pins/ramps/pins_K8800.h b/Marlin/src/pins/ramps/pins_K8800.h index 7e8c245a41..5388c9621d 100644 --- a/Marlin/src/pins/ramps/pins_K8800.h +++ b/Marlin/src/pins/ramps/pins_K8800.h @@ -113,7 +113,7 @@ #define LCD_CONTRAST_MAX 100 #define DEFAULT_LCD_CONTRAST 30 - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL #define BTN_EN1 17 #define BTN_EN2 16 #define BTN_ENC 23 diff --git a/Marlin/src/pins/ramps/pins_ORTUR_4.h b/Marlin/src/pins/ramps/pins_ORTUR_4.h index cef01bf62a..e79973e06f 100644 --- a/Marlin/src/pins/ramps/pins_ORTUR_4.h +++ b/Marlin/src/pins/ramps/pins_ORTUR_4.h @@ -91,7 +91,7 @@ // // LCD / Controller // -#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) +#if IS_RRD_FG_SC #undef BEEPER_PIN #define BEEPER_PIN 35 diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h index de56d2b59d..c8578f2fa1 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS.h @@ -441,7 +441,7 @@ #define LCD_PINS_ENABLE 51 // SID (MOSI) #define LCD_PINS_D4 52 // SCK (CLK) clock - #elif BOTH(NEWPANEL, PANEL_ONE) + #elif BOTH(IS_NEWPANEL, PANEL_ONE) #define LCD_PINS_RS 40 #define LCD_PINS_ENABLE 42 @@ -462,7 +462,7 @@ #define LCD_PINS_ENABLE 29 #define LCD_PINS_D4 25 - #if DISABLED(NEWPANEL) + #if !IS_NEWPANEL #define BEEPER_PIN 37 #endif @@ -481,10 +481,10 @@ #define LCD_PINS_DC 25 // Set as output on init #define LCD_PINS_RS 27 // Pull low for 1s to init // DOGM SPI LCD Support + #define DOGLCD_A0 LCD_PINS_DC #define DOGLCD_CS 16 #define DOGLCD_MOSI 17 #define DOGLCD_SCK 23 - #define DOGLCD_A0 LCD_PINS_DC #else #define LCD_PINS_RS 16 #define LCD_PINS_ENABLE 17 @@ -495,13 +495,13 @@ #define LCD_PINS_D7 29 - #if DISABLED(NEWPANEL) + #if !IS_NEWPANEL #define BEEPER_PIN 33 #endif #endif - #if DISABLED(NEWPANEL) + #if !IS_NEWPANEL // Buttons attached to a shift register // Not wired yet //#define SHIFT_CLK 38 @@ -515,9 +515,9 @@ // // LCD Display input pins // - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + #if IS_RRD_SC #define BEEPER_PIN 37 @@ -685,6 +685,7 @@ #elif ENABLED(AZSMZ_12864) // Pins only defined for RAMPS_SMART currently + #error "No pins defined for RAMPS with AZSMZ_12864." #elif IS_TFTGLCD_PANEL @@ -712,11 +713,11 @@ #endif #endif - #endif // NEWPANEL + #endif // IS_NEWPANEL #endif // HAS_WIRED_LCD -#if ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(ADC_KEYPAD) +#if IS_RRW_KEYPAD && !HAS_ADC_BUTTONS #define SHIFT_OUT 40 #define SHIFT_CLK 44 #define SHIFT_LD 42 diff --git a/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h b/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h index 9908d9494f..23b1dfa346 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h @@ -73,7 +73,7 @@ #undef E0_CS_PIN #undef E1_CS_PIN -#if ENABLED(ULTRA_LCD) && NONE(REPRAPWORLD_GRAPHICAL_LCD, CR10_STOCKDISPLAY) && !BOTH(NEWPANEL, PANEL_ONE) +#if IS_ULTRA_LCD && NONE(REPRAPWORLD_GRAPHICAL_LCD, CR10_STOCKDISPLAY) && !BOTH(IS_NEWPANEL, PANEL_ONE) #if DISABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306) #undef LCD_PINS_RS #define LCD_PINS_RS 42 // 3DYMY boards pin 16 -> 42 diff --git a/Marlin/src/pins/ramps/pins_RIGIDBOARD.h b/Marlin/src/pins/ramps/pins_RIGIDBOARD.h index c43d786aa2..345c51d5de 100644 --- a/Marlin/src/pins/ramps/pins_RIGIDBOARD.h +++ b/Marlin/src/pins/ramps/pins_RIGIDBOARD.h @@ -124,7 +124,7 @@ #undef SD_DETECT_PIN #define SD_DETECT_PIN 22 -#elif ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) +#elif IS_RRD_SC #undef SD_DETECT_PIN #define SD_DETECT_PIN 22 diff --git a/Marlin/src/pins/ramps/pins_RUMBA.h b/Marlin/src/pins/ramps/pins_RUMBA.h index 5be2896e18..4af49d9164 100644 --- a/Marlin/src/pins/ramps/pins_RUMBA.h +++ b/Marlin/src/pins/ramps/pins_RUMBA.h @@ -227,7 +227,7 @@ #define SD_DETECT_PIN 49 #endif -#if ENABLED(NEWPANEL) +#if IS_NEWPANEL #define BTN_EN1 11 #define BTN_EN2 12 #define BTN_ENC 43 diff --git a/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h b/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h index e7a59a69df..84e7e31126 100644 --- a/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h +++ b/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h @@ -163,7 +163,7 @@ // LCD / Controller // -//#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) +//#if IS_RRD_SC #define LCD_PINS_RS -1 #define LCD_PINS_ENABLE -1 @@ -182,4 +182,4 @@ #define BEEPER_PIN -1 //#endif -//#endif // REPRAP_DISCOUNT_SMART_CONTROLLER +//#endif // IS_RRD_SC diff --git a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h index 1c2cb60957..54d91cee6a 100644 --- a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h +++ b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h @@ -131,13 +131,13 @@ #if 0 && HAS_WIRED_LCD // LCD Display output pins - #if BOTH(NEWPANEL, PANEL_ONE) + #if BOTH(IS_NEWPANEL, PANEL_ONE) #undef LCD_PINS_D6 #define LCD_PINS_D6 57 #endif // LCD Display input pins - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL #if ANY(VIKI2, miniVIKI) #undef DOGLCD_A0 #define DOGLCD_A0 23 diff --git a/Marlin/src/pins/ramps/pins_TT_OSCAR.h b/Marlin/src/pins/ramps/pins_TT_OSCAR.h index 1568288e69..725d36466c 100644 --- a/Marlin/src/pins/ramps/pins_TT_OSCAR.h +++ b/Marlin/src/pins/ramps/pins_TT_OSCAR.h @@ -282,7 +282,7 @@ #define LCD_PINS_ENABLE 51 // SID (MOSI) #define LCD_PINS_D4 52 // SCK (CLK) clock - #elif BOTH(NEWPANEL, PANEL_ONE) + #elif BOTH(IS_NEWPANEL, PANEL_ONE) #define LCD_PINS_RS 40 #define LCD_PINS_ENABLE 42 @@ -309,7 +309,7 @@ #define LCD_PINS_ENABLE 29 #define LCD_PINS_D4 25 - #if DISABLED(NEWPANEL) + #if !IS_NEWPANEL #define BEEPER_PIN 37 #endif @@ -333,13 +333,13 @@ #define LCD_PINS_D7 29 - #if DISABLED(NEWPANEL) + #if !IS_NEWPANEL #define BEEPER_PIN 33 #endif #endif - #if DISABLED(NEWPANEL) + #if !IS_NEWPANEL // Buttons attached to a shift register // Not wired yet //#define SHIFT_CLK 38 @@ -353,9 +353,9 @@ // // LCD Display input pins // - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + #if IS_RRD_SC #define BEEPER_PIN 37 @@ -486,7 +486,7 @@ #define BEEPER_PIN 33 // Buttons are directly attached to AUX-2 - #if ENABLED(REPRAPWORLD_KEYPAD) + #if IS_RRW_KEYPAD #define SHIFT_OUT 40 #define SHIFT_CLK 44 #define SHIFT_LD 42 @@ -510,6 +510,6 @@ #endif - #endif // NEWPANEL + #endif // IS_NEWPANEL #endif diff --git a/Marlin/src/pins/ramps/pins_ULTIMAKER.h b/Marlin/src/pins/ramps/pins_ULTIMAKER.h index 597a37bdbc..116301f4d4 100644 --- a/Marlin/src/pins/ramps/pins_ULTIMAKER.h +++ b/Marlin/src/pins/ramps/pins_ULTIMAKER.h @@ -123,7 +123,7 @@ #define BEEPER_PIN 18 - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL #define LCD_PINS_RS 20 #define LCD_PINS_ENABLE 17 @@ -139,7 +139,7 @@ #define SD_DETECT_PIN 38 - #else // !NEWPANEL - Old style panel with shift register + #else // !IS_NEWPANEL - Old style panel with shift register // Buttons attached to a shift register #define SHIFT_CLK 38 @@ -156,7 +156,7 @@ #define SD_DETECT_PIN -1 - #endif // !NEWPANEL + #endif // !IS_NEWPANEL #endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h b/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h index c5bbd02bf5..9b17384aaf 100644 --- a/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h +++ b/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h @@ -174,11 +174,11 @@ #define LCD_PINS_D6 32 #define LCD_PINS_D7 30 -#elif BOTH(BOARD_REV_1_5, ULTRA_LCD) +#elif BOTH(BOARD_REV_1_5, IS_ULTRA_LCD) #define BEEPER_PIN 18 - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL #define LCD_PINS_RS 20 #define LCD_PINS_ENABLE 17 @@ -194,7 +194,7 @@ #define SD_DETECT_PIN 38 - #else // !NEWPANEL - Old style panel with shift register + #else // !IS_NEWPANEL - Old style panel with shift register // Buttons attached to a shift register #define SHIFT_CLK 38 @@ -209,7 +209,7 @@ #define LCD_PINS_D6 20 #define LCD_PINS_D7 19 - #endif // !NEWPANEL + #endif // !IS_NEWPANEL #endif diff --git a/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h b/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h index 8d6906117d..b01d1aafdf 100644 --- a/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h +++ b/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h @@ -143,7 +143,7 @@ // // LCD / Controller // -#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) +#if IS_RRD_FG_SC #define LCD_PINS_RS 18 #define LCD_PINS_ENABLE 15 #define LCD_PINS_D4 19 @@ -152,7 +152,7 @@ #define UI_VOLTAGE_LEVEL 1 #endif -#if ENABLED(NEWPANEL) +#if IS_NEWPANEL #define BTN_EN1 14 #define BTN_EN2 16 #define BTN_ENC 17 diff --git a/Marlin/src/pins/sam/pins_ARCHIM1.h b/Marlin/src/pins/sam/pins_ARCHIM1.h index 6e3768c663..347afe9ebd 100644 --- a/Marlin/src/pins/sam/pins_ARCHIM1.h +++ b/Marlin/src/pins/sam/pins_ARCHIM1.h @@ -192,10 +192,10 @@ #define SD_DETECT_PIN 2 // D2 PB25_TIOA0 - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL // Buttons on AUX-2 #define BTN_EN1 60 // D60 PA3_TIOB1 #define BTN_EN2 13 // D13 PB27_TIOB0 #define BTN_ENC 16 // D16 PA13_TXD1 - #endif // NEWPANEL + #endif // IS_NEWPANEL #endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/sam/pins_ARCHIM2.h b/Marlin/src/pins/sam/pins_ARCHIM2.h index 5a3fe0e4d5..5923ea0f8f 100644 --- a/Marlin/src/pins/sam/pins_ARCHIM2.h +++ b/Marlin/src/pins/sam/pins_ARCHIM2.h @@ -247,11 +247,11 @@ #define LCD_PINS_D7 34 // D34 PC2_PWML0 #define SD_DETECT_PIN 2 // D2 PB25_TIOA0 +#endif - #if ANY(ULTIPANEL, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE) - // Buttons on AUX-2 - #define BTN_EN1 60 // D60 PA3_TIOB1 - #define BTN_EN2 13 // D13 PB27_TIOB0 - #define BTN_ENC 16 // D16 PA13_TXD1 // the click - #endif +#if ANY(IS_ULTIPANEL, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE) + // Buttons on AUX-2 + #define BTN_EN1 60 // D60 PA3_TIOB1 + #define BTN_EN2 13 // D13 PB27_TIOB0 + #define BTN_ENC 16 // D16 PA13_TXD1 // the click #endif diff --git a/Marlin/src/pins/sam/pins_DUE3DOM.h b/Marlin/src/pins/sam/pins_DUE3DOM.h index cd4033aa6f..a5c22ff3f2 100644 --- a/Marlin/src/pins/sam/pins_DUE3DOM.h +++ b/Marlin/src/pins/sam/pins_DUE3DOM.h @@ -122,7 +122,7 @@ #define LCD_PINS_D6 46 #define LCD_PINS_D7 47 - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + #if IS_RRD_SC #define BEEPER_PIN 41 diff --git a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h index 5f9ad48a08..b3e76199dc 100644 --- a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h +++ b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h @@ -114,7 +114,7 @@ #define LCD_PINS_D6 46 #define LCD_PINS_D7 47 - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + #if IS_RRD_SC #define BEEPER_PIN 41 diff --git a/Marlin/src/pins/sam/pins_RADDS.h b/Marlin/src/pins/sam/pins_RADDS.h index 60fe351237..cd895365d0 100644 --- a/Marlin/src/pins/sam/pins_RADDS.h +++ b/Marlin/src/pins/sam/pins_RADDS.h @@ -248,7 +248,7 @@ #define SDSS 10 #define SD_DETECT_PIN 14 - #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #elif IS_RRD_FG_SC // The REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER requires // an adapter such as https://www.thingiverse.com/thing:1740725 diff --git a/Marlin/src/pins/sam/pins_RAMPS_DUO.h b/Marlin/src/pins/sam/pins_RAMPS_DUO.h index bfc3968ffa..44e2695a53 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_DUO.h +++ b/Marlin/src/pins/sam/pins_RAMPS_DUO.h @@ -78,7 +78,7 @@ // #if HAS_WIRED_LCD - #if BOTH(NEWPANEL, PANEL_ONE) + #if BOTH(IS_NEWPANEL, PANEL_ONE) #undef LCD_PINS_D4 #define LCD_PINS_D4 68 @@ -89,7 +89,7 @@ #define LCD_PINS_D7 67 #endif - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) @@ -115,7 +115,7 @@ #else - #if ENABLED(REPRAPWORLD_KEYPAD) + #if IS_RRW_KEYPAD #undef BTN_EN1 #define BTN_EN1 67 // encoder @@ -127,6 +127,6 @@ #endif #endif - #endif // NEWPANEL + #endif // IS_NEWPANEL #endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h index ee525eefaa..a0dbddf567 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h +++ b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h @@ -148,7 +148,7 @@ #define BTN_ENC 35 #define SD_DETECT_PIN 49 - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL #define LCD_PINS_RS 16 #define LCD_PINS_ENABLE 17 #endif @@ -178,7 +178,7 @@ #define NEOPIXEL_PIN 25 #endif - #elif ENABLED(NEWPANEL) + #elif IS_NEWPANEL #define LCD_PINS_D4 23 #define LCD_PINS_D5 25 diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_11.h b/Marlin/src/pins/sam/pins_RURAMPS4D_11.h index b9e61fb27c..49378541a9 100644 --- a/Marlin/src/pins/sam/pins_RURAMPS4D_11.h +++ b/Marlin/src/pins/sam/pins_RURAMPS4D_11.h @@ -202,7 +202,7 @@ // #if HAS_WIRED_LCD - #if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #if ANY(RADDS_DISPLAY, IS_RRD_SC, IS_RRD_FG_SC) #define BEEPER_PIN 62 #define LCD_PINS_D4 48 #define LCD_PINS_D5 50 @@ -211,12 +211,12 @@ #define SD_DETECT_PIN 51 #endif - #if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER) + #if EITHER(RADDS_DISPLAY, IS_RRD_SC) #define LCD_PINS_RS 63 #define LCD_PINS_ENABLE 64 - #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #elif IS_RRD_FG_SC #define LCD_PINS_RS 52 #define LCD_PINS_ENABLE 53 @@ -265,7 +265,7 @@ #endif // SPARK_FULL_GRAPHICS - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL #define BTN_EN1 44 #define BTN_EN2 42 #define BTN_ENC 40 diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_13.h b/Marlin/src/pins/sam/pins_RURAMPS4D_13.h index dc0c127995..1cc2eee6b0 100644 --- a/Marlin/src/pins/sam/pins_RURAMPS4D_13.h +++ b/Marlin/src/pins/sam/pins_RURAMPS4D_13.h @@ -188,7 +188,7 @@ // #if HAS_WIRED_LCD - #if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #if ANY(RADDS_DISPLAY, IS_RRD_SC, IS_RRD_FG_SC) #define BEEPER_PIN 62 #define LCD_PINS_D4 48 #define LCD_PINS_D5 50 @@ -197,12 +197,12 @@ #define SD_DETECT_PIN 51 #endif - #if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER) + #if EITHER(RADDS_DISPLAY, IS_RRD_SC) #define LCD_PINS_RS 63 #define LCD_PINS_ENABLE 64 - #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #elif IS_RRD_FG_SC #define LCD_PINS_RS 52 #define LCD_PINS_ENABLE 53 @@ -247,7 +247,7 @@ #endif - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL #define BTN_EN1 44 #define BTN_EN2 42 #define BTN_ENC 40 diff --git a/Marlin/src/pins/samd/pins_RAMPS_144.h b/Marlin/src/pins/samd/pins_RAMPS_144.h index 6076be07e9..1948acf897 100644 --- a/Marlin/src/pins/samd/pins_RAMPS_144.h +++ b/Marlin/src/pins/samd/pins_RAMPS_144.h @@ -299,7 +299,7 @@ //#define LCD_PINS_ENABLE 51 // SID (MOSI) //#define LCD_PINS_D4 52 // SCK (CLK) clock - #elif BOTH(NEWPANEL, PANEL_ONE) + #elif BOTH(IS_NEWPANEL, PANEL_ONE) // TO TEST //#define LCD_PINS_RS 40 @@ -318,7 +318,7 @@ //#define LCD_PINS_ENABLE 29 //#define LCD_PINS_D4 25 - #if DISABLED(NEWPANEL) + #if !IS_NEWPANEL // TO TEST //#define BEEPER_PIN 37 #endif @@ -354,13 +354,13 @@ #define LCD_PINS_D7 29 - #if DISABLED(NEWPANEL) + #if !IS_NEWPANEL #define BEEPER_PIN 33 #endif #endif - #if DISABLED(NEWPANEL) + #if !IS_NEWPANEL // Buttons attached to a shift register // Not wired yet //#define SHIFT_CLK 38 @@ -374,9 +374,9 @@ // // LCD Display input pins // - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + #if IS_RRD_SC #define BEEPER_PIN 37 @@ -565,7 +565,7 @@ //#define BEEPER_PIN 33 // Buttons are directly attached to AUX-2 - #if ENABLED(REPRAPWORLD_KEYPAD) + #if IS_RRW_KEYPAD // TO TEST //#define SHIFT_OUT 40 //#define SHIFT_CLK 44 @@ -592,7 +592,7 @@ #endif #endif - #endif // NEWPANEL + #endif // IS_NEWPANEL #endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/sanguino/pins_ANET_10.h b/Marlin/src/pins/sanguino/pins_ANET_10.h index 74692a21a3..d48db36287 100644 --- a/Marlin/src/pins/sanguino/pins_ANET_10.h +++ b/Marlin/src/pins/sanguino/pins_ANET_10.h @@ -151,7 +151,7 @@ #if HAS_WIRED_LCD #define LCD_SDSS 28 - #if ENABLED(ADC_KEYPAD) + #if HAS_ADC_BUTTONS #define SERVO0_PIN 27 // free for BLTouch/3D-Touch #define LCD_PINS_RS 28 #define LCD_PINS_ENABLE 29 @@ -160,7 +160,7 @@ #define LCD_PINS_D6 16 #define LCD_PINS_D7 17 #define ADC_KEYPAD_PIN 1 - #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #elif IS_RRD_FG_SC // Pin definitions for the Anet A6 Full Graphics display and the RepRapDiscount Full Graphics // display using an adapter board // https://go.aisler.net/benlye/anet-lcd-adapter/pcb // See below for alternative pin definitions for use with https://www.thingiverse.com/thing:2103748 diff --git a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h index 438d49d615..69b351e3fc 100644 --- a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h +++ b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h @@ -136,7 +136,7 @@ #define LCD_BACKLIGHT_PIN 17 // LCD backlight LED #endif -#if NONE(SPINDLE_FEATURE, LASER_FEATURE) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL)// try to use IO Header +#if NONE(SPINDLE_FEATURE, LASER_FEATURE) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(IS_ULTRA_LCD, IS_NEWPANEL) // try to use IO Header #define CASE_LIGHT_PIN 4 // Hardware PWM - see if IO Header is available #endif @@ -185,7 +185,7 @@ // with M42 instead of BEEPER_PIN. #define BEEPER_PIN 27 - #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #if IS_RRD_FG_SC #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(0) #endif @@ -283,7 +283,7 @@ #endif - #if ENABLED(NEWPANEL) && !defined(BTN_EN1) + #if IS_NEWPANEL && !defined(BTN_EN1) #define BTN_EN1 11 #define BTN_EN2 10 #endif @@ -294,7 +294,7 @@ // M3/M4/M5 - Spindle/Laser Control // #if HAS_CUTTER - #if !MB(AZTEEG_X1) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL)// try to use IO Header + #if !MB(AZTEEG_X1) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(IS_ULTRA_LCD, IS_NEWPANEL) // try to use IO Header #define SPINDLE_LASER_ENA_PIN 10 // Pullup or pulldown! #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM diff --git a/Marlin/src/pins/sanguino/pins_ZMIB_V2.h b/Marlin/src/pins/sanguino/pins_ZMIB_V2.h index 838ffe38aa..4257b2c40e 100644 --- a/Marlin/src/pins/sanguino/pins_ZMIB_V2.h +++ b/Marlin/src/pins/sanguino/pins_ZMIB_V2.h @@ -225,7 +225,7 @@ // // All the above are also RRDSC with rotary encoder // -#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) +#if IS_RRD_SC #define BTN_EN1 2 #define BTN_EN2 12 #define BTN_ENC 29 diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h index 47fff4467c..ce43e677e2 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h @@ -175,7 +175,7 @@ #else // !FYSETC_MINI_12864 #define LCD_PINS_D4 PC13 - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 PB7 #define LCD_PINS_D6 PC15 #define LCD_PINS_D7 PC14 diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D.h b/Marlin/src/pins/stm32f1/pins_CHITU3D.h index 3a872db025..1d8f4f684b 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D.h @@ -126,7 +126,7 @@ #define LCD_PINS_RS PD1 // 49 // CS chip select /SS chip slave select #define LCD_PINS_ENABLE PD3 // 51 // SID (MOSI) #define LCD_PINS_D4 PD4 // 52 // SCK (CLK) clock - #elif BOTH(NEWPANEL, PANEL_ONE) + #elif BOTH(IS_NEWPANEL, PANEL_ONE) #define LCD_PINS_RS PB8 #define LCD_PINS_ENABLE PD2 #define LCD_PINS_D4 PB12 @@ -140,7 +140,7 @@ #define LCD_PINS_D5 PB13 #define LCD_PINS_D6 PB14 #define LCD_PINS_D7 PB15 - #if DISABLED(NEWPANEL) + #if !IS_NEWPANEL #define BEEPER_PIN PC1 // 33 // Buttons attached to a shift register // Not wired yet @@ -151,9 +151,9 @@ #endif #endif - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + #if IS_RRD_SC #define BEEPER_PIN PC5 @@ -254,7 +254,7 @@ #define BEEPER_PIN PC1 // 33 // Buttons directly attached to AUX-2 - #if ENABLED(REPRAPWORLD_KEYPAD) + #if IS_RRW_KEYPAD #define BTN_EN1 PE0 // 64 #define BTN_EN2 PD11 // 59 #define BTN_ENC PD15 // 63 @@ -279,6 +279,6 @@ #endif #endif - #endif // NEWPANEL + #endif // IS_NEWPANEL #endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h index b02d414089..33ec27ddba 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h @@ -152,9 +152,6 @@ // Color UI #define TFT_DRIVER ILI9488 #define TFT_BUFFER_SIZE 14400 -#elif ENABLED(TFT_CLASSIC_UI) - // Emulated DOGM - #define GRAPHICAL_TFT_UPSCALE 3 #endif // XPT2046 Touch Screen calibration diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h index cafd50dcf2..990d33b759 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h @@ -167,9 +167,6 @@ // Color UI #define TFT_DRIVER ILI9488 #define TFT_BUFFER_SIZE 14400 -#elif ENABLED(TFT_CLASSIC_UI) - // Emulated DOGM - #define GRAPHICAL_TFT_UPSCALE 3 #endif // XPT2046 Touch Screen calibration diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h index ebe5964d05..d2c587beb8 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h @@ -162,7 +162,7 @@ // not connected to a pin #define SD_DETECT_PIN PC3 - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL // The encoder and click button #define BTN_EN1 PC10 #define BTN_EN2 PC11 diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h index de5ea45d44..deca1a0546 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h @@ -153,7 +153,7 @@ //#define LCD_CONTRAST_INIT 190 - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL #define BTN_EN1 PC10 #define BTN_EN2 PC11 #define BTN_ENC PC12 diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h index ca25c45a7b..00c5721384 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h @@ -137,7 +137,7 @@ // #if HAS_WIRED_LCD - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + #if IS_RRD_SC // // LCD display on J2 FFC40 // Geeetech's LCD2004A Control Panel is very much like @@ -172,7 +172,7 @@ #endif // HAS_WIRED_LCD -#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) +#if IS_RRD_SC // // Geeetech's LCD2004A Control Panel is very much like // RepRapDiscount Smart Controller, but adds an FFC40 connector diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h index 02fd3bcae7..b10748e57f 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h @@ -137,7 +137,7 @@ // #if HAS_WIRED_LCD - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + #if IS_RRD_SC // // LCD display on J2 FFC40 // Geeetech's LCD2004A Control Panel is very much like diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h index ca25c45a7b..00c5721384 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h @@ -137,7 +137,7 @@ // #if HAS_WIRED_LCD - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + #if IS_RRD_SC // // LCD display on J2 FFC40 // Geeetech's LCD2004A Control Panel is very much like @@ -172,7 +172,7 @@ #endif // HAS_WIRED_LCD -#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) +#if IS_RRD_SC // // Geeetech's LCD2004A Control Panel is very much like // RepRapDiscount Smart Controller, but adds an FFC40 connector diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h index fc18263fdd..b913530f67 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h @@ -137,7 +137,7 @@ // #if HAS_WIRED_LCD - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + #if IS_RRD_SC // // LCD display on J2 FFC40 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h index 8831d6804b..63c0da476d 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h @@ -126,6 +126,11 @@ #endif #define LED_PIN PB2 +#if HAS_FSMC_TFT || HAS_GRAPHICAL_TFT + #define TFT_CS_PIN PG12 // NE4 + #define TFT_RS_PIN PF0 // A0 +#endif + #if HAS_FSMC_TFT /** * Note: MKS Robin TFT screens use various TFT controllers @@ -141,10 +146,8 @@ */ //#define LCD_RESET_PIN PF6 #define LCD_BACKLIGHT_PIN PG11 - #define FSMC_CS_PIN PG12 // NE4 - #define FSMC_RS_PIN PF0 // A0 - #define TFT_CS_PIN FSMC_CS_PIN - #define TFT_RS_PIN FSMC_RS_PIN + #define FSMC_CS_PIN TFT_CS_PIN + #define FSMC_RS_PIN TFT_RS_PIN #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT #define FSMC_DMA_DEV DMA2 @@ -152,8 +155,6 @@ #elif HAS_GRAPHICAL_TFT #define TFT_RESET_PIN PF6 #define TFT_BACKLIGHT_PIN PG11 - #define TFT_CS_PIN PG12 // NE4 - #define TFT_RS_PIN PF0 // A0 #endif #if NEED_TOUCH_PINS diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h index 94a28953cc..4998c92dc5 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h @@ -269,22 +269,13 @@ #endif -#if ENABLED(SPI_GRAPHICAL_TFT) +#if HAS_SPI_GRAPHICAL_TFT // Emulated DOGM SPI - #ifndef GRAPHICAL_TFT_UPSCALE - #define GRAPHICAL_TFT_UPSCALE 3 - #endif - #ifndef TFT_PIXEL_OFFSET_Y - #define TFT_PIXEL_OFFSET_Y 32 - #endif - + #define LCD_PINS_ENABLE PD13 + #define LCD_PINS_RS PC6 #define BTN_ENC PE13 #define BTN_EN1 PE8 #define BTN_EN2 PE11 - - #define LCD_PINS_ENABLE PD13 - #define LCD_PINS_RS PC6 - #elif ENABLED(TFT_480x320_SPI) #define TFT_DRIVER ST7796 #define TFT_BUFFER_SIZE 14400 @@ -304,7 +295,7 @@ #ifndef XPT2046_Y_OFFSET #define XPT2046_Y_OFFSET -24 #endif -#elif ENABLED(SPI_GRAPHICAL_TFT) +#elif HAS_SPI_GRAPHICAL_TFT #ifndef XPT2046_X_CALIBRATION #define XPT2046_X_CALIBRATION -11386 #endif @@ -342,7 +333,7 @@ #else // !MKS_MINI_12864 #define LCD_PINS_D4 PE14 - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 PE15 #define LCD_PINS_D6 PD11 #define LCD_PINS_D7 PD10 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h index 015e29bdbe..af2908545b 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h @@ -154,7 +154,7 @@ #else #define LCD_PINS_D4 PA6 - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 PA7 #define LCD_PINS_D6 PC4 #define LCD_PINS_D7 PC5 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h index aa1ccedb35..ffd21917dd 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h @@ -103,7 +103,7 @@ #else // !MKS_MINI_12864 #define LCD_PINS_D4 PC1 - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 -1 #define LCD_PINS_D6 -1 #define LCD_PINS_D7 -1 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h index d5318b8e87..493efc5c7b 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h @@ -124,7 +124,7 @@ #else // !MKS_MINI_12864 #define LCD_PINS_D4 PA6 - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 PA7 #define LCD_PINS_D6 PC4 #define LCD_PINS_D7 PC5 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h index 2b099b3e93..14f9c3b626 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h @@ -139,23 +139,7 @@ * If the screen stays white, disable 'LCD_RESET_PIN' * to let the bootloader init the screen. */ -#if ENABLED(TOUCH_SCREEN) - #ifndef XPT2046_X_CALIBRATION - #define XPT2046_X_CALIBRATION 12033 - #endif - #ifndef XPT2046_Y_CALIBRATION - #define XPT2046_Y_CALIBRATION -9047 - #endif - #ifndef XPT2046_X_OFFSET - #define XPT2046_X_OFFSET -30 - #endif - #ifndef XPT2046_Y_OFFSET - #define XPT2046_Y_OFFSET 254 - #endif -#endif - -#if ENABLED(FSMC_GRAPHICAL_TFT) - +#if EITHER(HAS_FSMC_GRAPHICAL_TFT, TFT_320x240) #define FSMC_CS_PIN PD7 // NE4 #define FSMC_RS_PIN PD11 // A0 @@ -165,39 +149,38 @@ #define LCD_RESET_PIN PC6 // FSMC_RST #define LCD_BACKLIGHT_PIN PD13 +#endif - #if NEED_TOUCH_PINS - #define TOUCH_CS_PIN PC2 // SPI2_NSS - #define TOUCH_SCK_PIN PB13 // SPI2_SCK - #define TOUCH_MISO_PIN PB14 // SPI2_MISO - #define TOUCH_MOSI_PIN PB15 // SPI2_MOSI - #endif - -#elif ENABLED(TFT_320x240) //TFT32/28 - - #define TFT_RESET_PIN PC6 - #define TFT_BACKLIGHT_PIN PD13 - - #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT - #define FSMC_CS_PIN PD7 - #define FSMC_RS_PIN PD11 - #define FSMC_DMA_DEV DMA2 - #define FSMC_DMA_CHANNEL DMA_CH5 - +#if BOTH(NEED_TOUCH_PINS, HAS_FSMC_GRAPHICAL_TFT) || ENABLED(TFT_320x240) #define TOUCH_CS_PIN PC2 // SPI2_NSS #define TOUCH_SCK_PIN PB13 // SPI2_SCK #define TOUCH_MISO_PIN PB14 // SPI2_MISO #define TOUCH_MOSI_PIN PB15 // SPI2_MOSI +#endif +#if ENABLED(TFT_320x240) // TFT32/28 #define TFT_DRIVER ILI9341 #define TFT_BUFFER_SIZE 14400 - + #define ILI9341_COLOR_RGB // YV for normal screen mounting #define ILI9341_ORIENTATION ILI9341_MADCTL_MY | ILI9341_MADCTL_MV // XV for 180° rotated screen mounting //#define ILI9341_ORIENTATION ILI9341_MADCTL_MX | ILI9341_MADCTL_MV +#endif - #define ILI9341_COLOR_RGB +#if ENABLED(TOUCH_SCREEN) + #ifndef XPT2046_X_CALIBRATION + #define XPT2046_X_CALIBRATION 12033 + #endif + #ifndef XPT2046_Y_CALIBRATION + #define XPT2046_Y_CALIBRATION -9047 + #endif + #ifndef XPT2046_X_OFFSET + #define XPT2046_X_OFFSET -30 + #endif + #ifndef XPT2046_Y_OFFSET + #define XPT2046_Y_OFFSET 254 + #endif #endif #define HAS_SPI_FLASH 1 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h index 16d6d2ffc4..86dab41121 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h @@ -198,7 +198,7 @@ #endif // XPT2046 Touch Screen calibration -#if EITHER(TFT_LVGL_UI_FSMC, TFT_480x320) +#if EITHER(HAS_TFT_LVGL_UI_FSMC, TFT_480x320) #ifndef XPT2046_X_CALIBRATION #define XPT2046_X_CALIBRATION 17880 #endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h index 846fe80a08..b1e49f4d9f 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h @@ -275,20 +275,11 @@ #if ENABLED(TFT_CLASSIC_UI) // Emulated DOGM SPI - #ifndef GRAPHICAL_TFT_UPSCALE - #define GRAPHICAL_TFT_UPSCALE 3 - #endif - #ifndef TFT_PIXEL_OFFSET_Y - #define TFT_PIXEL_OFFSET_Y 32 - #endif - + #define LCD_PINS_ENABLE PD13 + #define LCD_PINS_RS PC6 #define BTN_ENC PE13 #define BTN_EN1 PE8 #define BTN_EN2 PE11 - - #define LCD_PINS_ENABLE PD13 - #define LCD_PINS_RS PC6 - #elif ENABLED(TFT_COLOR_UI) #define TFT_BUFFER_SIZE 14400 #endif @@ -354,7 +345,7 @@ #else // !MKS_MINI_12864 #define LCD_PINS_D4 PE14 - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 PE15 #define LCD_PINS_D6 PD11 #define LCD_PINS_D7 PD10 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h index 32203f52ea..db6bc93205 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h @@ -210,7 +210,7 @@ * If the screen stays white, disable 'LCD_RESET_PIN' * to let the bootloader init the screen. */ -#if ENABLED(FSMC_GRAPHICAL_TFT) +#if HAS_FSMC_GRAPHICAL_TFT #define FSMC_CS_PIN PD7 // NE4 #define FSMC_RS_PIN PD11 // A0 @@ -254,7 +254,7 @@ #else // !MKS_MINI_12864 && !ENDER2_STOCKDISPLAY #define LCD_PINS_D4 PF14 - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 PF15 #define LCD_PINS_D6 PF12 #define LCD_PINS_D7 PF13 diff --git a/Marlin/src/pins/stm32f1/pins_STM32F1R.h b/Marlin/src/pins/stm32f1/pins_STM32F1R.h index cf2ba2c5fa..1b9a62fe9e 100644 --- a/Marlin/src/pins/stm32f1/pins_STM32F1R.h +++ b/Marlin/src/pins/stm32f1/pins_STM32F1R.h @@ -103,7 +103,7 @@ #define LCD_PINS_RS 49 // CS chip select /SS chip slave select #define LCD_PINS_ENABLE 51 // SID (MOSI) #define LCD_PINS_D4 52 // SCK (CLK) clock - #elif BOTH(NEWPANEL, PANEL_ONE) + #elif BOTH(IS_NEWPANEL, PANEL_ONE) #define LCD_PINS_RS PB8 #define LCD_PINS_ENABLE PD2 #define LCD_PINS_D4 PB12 @@ -117,7 +117,7 @@ #define LCD_PINS_D5 PB13 #define LCD_PINS_D6 PB14 #define LCD_PINS_D7 PB15 - #if DISABLED(NEWPANEL) + #if !IS_NEWPANEL #define BEEPER_PIN 33 // Buttons attached to a shift register // Not wired yet @@ -128,9 +128,9 @@ #endif #endif - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + #if IS_RRD_SC #define BEEPER_PIN 37 @@ -231,7 +231,7 @@ #define BEEPER_PIN 33 // Buttons directly attached to AUX-2 - #if ENABLED(REPRAPWORLD_KEYPAD) + #if IS_RRW_KEYPAD #define BTN_EN1 64 #define BTN_EN2 59 #define BTN_ENC 63 @@ -256,6 +256,6 @@ #endif #endif - #endif // NEWPANEL + #endif // IS_NEWPANEL #endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h index e74698f89e..3ebc4bca57 100644 --- a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h @@ -118,7 +118,7 @@ #define LCD_PINS_RS 49 // CS chip select /SS chip slave select #define LCD_PINS_ENABLE 51 // SID (MOSI) #define LCD_PINS_D4 52 // SCK (CLK) clock - #elif BOTH(NEWPANEL, PANEL_ONE) + #elif BOTH(IS_NEWPANEL, PANEL_ONE) #define LCD_PINS_RS PB8 #define LCD_PINS_ENABLE PD2 #define LCD_PINS_D4 PB12 @@ -132,7 +132,7 @@ #define LCD_PINS_D5 PB13 #define LCD_PINS_D6 PB14 #define LCD_PINS_D7 PB15 - #if DISABLED(NEWPANEL) + #if !IS_NEWPANEL #define BEEPER_PIN 33 // Buttons attached to a shift register // Not wired yet @@ -151,9 +151,9 @@ #define TOUCH_MISO_PIN PB15 #define TOUCH_INT_PIN PC6 // (PenIRQ coming from ADS7843) - #elif ENABLED(NEWPANEL) + #elif IS_NEWPANEL - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + #if IS_RRD_SC #define BEEPER_PIN 37 @@ -255,7 +255,7 @@ #define BEEPER_PIN 33 // Buttons directly attached to AUX-2 - #if ENABLED(REPRAPWORLD_KEYPAD) + #if IS_RRW_KEYPAD #define BTN_EN1 64 #define BTN_EN2 59 #define BTN_ENC 63 @@ -280,6 +280,6 @@ #endif #endif - #endif // NEWPANEL + #endif // IS_NEWPANEL #endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/stm32f4/pins_BEAST.h b/Marlin/src/pins/stm32f4/pins_BEAST.h index 268b7b59cd..279d0b9ec7 100644 --- a/Marlin/src/pins/stm32f4/pins_BEAST.h +++ b/Marlin/src/pins/stm32f4/pins_BEAST.h @@ -126,7 +126,7 @@ #define LCD_PINS_RS 49 // CS chip select /SS chip slave select #define LCD_PINS_ENABLE 51 // SID (MOSI) #define LCD_PINS_D4 52 // SCK (CLK) clock - #elif BOTH(NEWPANEL, PANEL_ONE) + #elif BOTH(IS_NEWPANEL, PANEL_ONE) #define LCD_PINS_RS PB8 #define LCD_PINS_ENABLE PD2 #define LCD_PINS_D4 PB12 @@ -140,7 +140,7 @@ #define LCD_PINS_D5 PB13 #define LCD_PINS_D6 PB14 #define LCD_PINS_D7 PB15 - #if DISABLED(NEWPANEL) + #if !IS_NEWPANEL #define BEEPER_PIN 33 // Buttons attached to a shift register // Not wired yet @@ -151,9 +151,9 @@ #endif #endif - #if ENABLED(NEWPANEL) + #if IS_NEWPANEL - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + #if IS_RRD_SC #define BEEPER_PIN 37 @@ -255,7 +255,7 @@ #define BEEPER_PIN 33 // Buttons directly attached to AUX-2 - #if ENABLED(REPRAPWORLD_KEYPAD) + #if IS_RRW_KEYPAD #define BTN_EN1 64 #define BTN_EN2 59 #define BTN_ENC 63 @@ -280,6 +280,6 @@ #endif #endif - #endif // NEWPANEL + #endif // IS_NEWPANEL #endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h index c37f6cce04..6f9c3d3095 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h @@ -228,7 +228,7 @@ #define LCD_PINS_ENABLE PE9 #define LCD_PINS_D4 PE10 - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 PE11 #define LCD_PINS_D6 PE12 #define LCD_PINS_D7 PE13 diff --git a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h index dc8ce9f2d1..eaf90da1ae 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h @@ -385,7 +385,7 @@ #endif #endif // !FYSETC_MINI_12864 - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 PG7 #define LCD_PINS_D6 PG6 #define LCD_PINS_D7 PG5 diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h index 83fd987d9d..995fcb9585 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h @@ -350,7 +350,7 @@ #endif #endif // !FYSETC_MINI_12864 - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 PG3 #define LCD_PINS_D6 PG6 #define LCD_PINS_D7 PG7 diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h index 151f6c3bc0..8638e9a4cf 100644 --- a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h +++ b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h @@ -252,7 +252,7 @@ #endif #endif // !FYSETC_MINI_12864 - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 PC12 #define LCD_PINS_D6 PD0 #define LCD_PINS_D7 PD1 diff --git a/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h b/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h index d52bb11d12..9a6a16516c 100644 --- a/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h +++ b/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h @@ -161,7 +161,7 @@ #define DOGLCD_A0 PE14 #endif - #if ENABLED(ULTIPANEL) + #if IS_ULTIPANEL #define LCD_PINS_D5 PE13 #define LCD_PINS_D6 PE14 #define LCD_PINS_D7 PE15 diff --git a/Marlin/src/pins/stm32f7/pins_NUCLEO_F767ZI.h b/Marlin/src/pins/stm32f7/pins_NUCLEO_F767ZI.h index 5e3d5f4ab5..7d95521eb6 100644 --- a/Marlin/src/pins/stm32f7/pins_NUCLEO_F767ZI.h +++ b/Marlin/src/pins/stm32f7/pins_NUCLEO_F767ZI.h @@ -41,7 +41,7 @@ /** * Timer assignments - * + * * TIM1 - * TIM2 - Hardware PWM (Fan/Heater Pins) * TIM3 - Hardware PWM (Servo Pins) @@ -55,7 +55,7 @@ * TIM12 - * TIM13 - * TIM14 - TEMP_TIMER (Marlin) - * + * */ #define STEP_TIMER 4 #define TEMP_TIMER 14 @@ -66,7 +66,7 @@ * Assignments may not be ideal, and not every assignment has been tested. * Proceed at your own risk. * _CN7_ - * (X_STEP) PC6 | · · | PB8 (X_EN) + * (X_STEP) PC6 | · · | PB8 (X_EN) * (X_DIR) PB15 | · · | PB9 (X_CS) * (LCD_D4) PB13 | · · | AVDD * _CN8_ PB12 | · · | GND @@ -77,7 +77,7 @@ * +5V | · · | PC12 (SDSS) PA4 | · · | PD15 (LCD_ENABLE) * GND | · · | PD2 (SERVO0_PIN) PB4 | · · | PF12 (LCD_RS) * GND | · · | PG2 ￣￣￣ - * VIN | · · | PG3 + * VIN | · · | PG3 _* ￣￣￣ _CN10 * AVDD | · · | PF13 (BTN_EN1) * _CN9_ AGND | · · | PE9 (BTN_EN2) @@ -140,7 +140,7 @@ _* ￣￣￣ _CN10 #define Z_SERIAL_RX_PIN PE12 #define E_SERIAL_TX_PIN PG9 - #define E_SERIAL_RX_PIN PG9 + #define E_SERIAL_RX_PIN PG9 #endif // @@ -182,7 +182,7 @@ _* ￣￣￣ _CN10 // // LCD / Controller // -#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) +#if IS_RRD_FG_SC #define BEEPER_PIN PC7 // LCD_BEEPER #define BTN_ENC PE11 // BTN_ENC #define SD_DETECT_PIN PD14 diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h index ffecc03b4a..2401c976f1 100644 --- a/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h +++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h @@ -124,7 +124,7 @@ // // LCD / Controller // -#if BOTH(ULTRA_LCD, NEWPANEL) +#if IS_ULTRA_LCD && IS_NEWPANEL #define LCD_PINS_RS 9 // E1 JP11-11 #define LCD_PINS_ENABLE 8 // E0 JP11-10 @@ -166,4 +166,4 @@ #endif -#endif // ULTRA_LCD && NEWPANEL +#endif // IS_ULTRA_LCD && IS_NEWPANEL diff --git a/Marlin/src/pins/teensy2/pins_TEENSY2.h b/Marlin/src/pins/teensy2/pins_TEENSY2.h index 4efd83d9bc..d43e39b09a 100644 --- a/Marlin/src/pins/teensy2/pins_TEENSY2.h +++ b/Marlin/src/pins/teensy2/pins_TEENSY2.h @@ -168,7 +168,7 @@ // // LCD / Controller // -#if ENABLED(ULTIPANEL) +#if IS_ULTIPANEL #define LCD_PINS_RS 8 // E0 #define LCD_PINS_ENABLE 9 // E1 #define LCD_PINS_D4 10 // C0 diff --git a/Marlin/src/pins/teensy2/pins_TEENSYLU.h b/Marlin/src/pins/teensy2/pins_TEENSYLU.h index 9de119b62b..54cee137ad 100644 --- a/Marlin/src/pins/teensy2/pins_TEENSYLU.h +++ b/Marlin/src/pins/teensy2/pins_TEENSYLU.h @@ -141,7 +141,7 @@ // // LCD / Controller // -#if BOTH(ULTRA_LCD, NEWPANEL) +#if IS_ULTRA_LCD && IS_NEWPANEL #define BEEPER_PIN -1 @@ -154,7 +154,7 @@ #define SD_DETECT_PIN -1 -#endif // ULTRA_LCD && NEWPANEL +#endif // IS_ULTRA_LCD && IS_NEWPANEL // // M3/M4/M5 - Spindle/Laser Control diff --git a/Marlin/src/pins/teensy3/pins_TEENSY35_36.h b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h index 2e09c8a425..b8a0ffe2c8 100644 --- a/Marlin/src/pins/teensy3/pins_TEENSY35_36.h +++ b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h @@ -139,13 +139,13 @@ #define LCD_PINS_D7 45 #endif -#if ENABLED(NEWPANEL) +#if IS_NEWPANEL #define BTN_EN1 46 #define BTN_EN2 47 #define BTN_ENC 48 #endif -#if ENABLED(REPRAPWORLD_KEYPAD) +#if IS_RRW_KEYPAD #define SHIFT_OUT 40 #define SHIFT_CLK 44 #define SHIFT_LD 42 diff --git a/buildroot/tests/STM32F103VE_longer-tests b/buildroot/tests/STM32F103VE_longer-tests index 85b22c1284..8eb9e4cd1b 100755 --- a/buildroot/tests/STM32F103VE_longer-tests +++ b/buildroot/tests/STM32F103VE_longer-tests @@ -7,8 +7,6 @@ set -e use_example_configs Alfawise/U20 -opt_set MOTHERBOARD BOARD_LONGER3D_LK -opt_set SERIAL_PORT 1 opt_enable BAUD_RATE_GCODE exec_test $1 $2 "Full-featured U20 config" diff --git a/buildroot/tests/mks_robin-tests b/buildroot/tests/mks_robin-tests index d635062205..4246231070 100644 --- a/buildroot/tests/mks_robin-tests +++ b/buildroot/tests/mks_robin-tests @@ -8,9 +8,7 @@ set -e use_example_configs Mks/Robin -opt_disable TFT_320x240 -opt_enable FSMC_GRAPHICAL_TFT -exec_test $1 $2 "MKS Robin base configuration" +exec_test $1 $2 "MKS Robin config (FSMC Color UI)" # cleanup restore_configs diff --git a/buildroot/tests/mks_robin_nano35-tests b/buildroot/tests/mks_robin_nano35-tests index 92c97be756..ce98f563b9 100644 --- a/buildroot/tests/mks_robin_nano35-tests +++ b/buildroot/tests/mks_robin_nano35-tests @@ -7,39 +7,50 @@ # exit on first failure set -e +# +# MKS Robin nano v1.2 Emulated DOGM FSMC +# use_example_configs Mks/Robin opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO -opt_disable TFT_320x240 -opt_enable TOUCH_SCREEN -opt_enable FSMC_GRAPHICAL_TFT exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC" +# +# MKS Robin v2 nano LVGL SPI +# (Robin v2 nano has no FSMC interface) +# use_example_configs Mks/Robin opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 -opt_disable TFT_320x240 -opt_enable TOUCH_SCREEN -opt_enable SPI_GRAPHICAL_TFT +opt_disable TFT_INTERFACE_FSMC +opt_enable TFT_INTERFACE_SPI exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI" +# +# MKS Robin nano v1.2 LVGL FSMC +# use_example_configs Mks/Robin opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO -opt_disable TFT_320x240 -opt_disable TOUCH_SCREEN -opt_enable TFT_LVGL_UI_FSMC +opt_disable TFT_CLASSIC_UI TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240 +opt_enable TFT_LVGL_UI TFT_RES_480x320 exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC" +# +# MKS Robin v2 nano LVGL SPI +# (Robin v2 nano has no FSMC interface) +# use_example_configs Mks/Robin opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 -opt_disable TFT_320x240 -opt_disable TOUCH_SCREEN -opt_enable TFT_LVGL_UI_SPI +opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240 +opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320 exec_test $1 $2 "MKS Robin v2 nano LVGL SPI" +# +# MKS Robin v2 nano New Color UI 480x320 SPI +# (Robin v2 nano has no FSMC interface) +# use_example_configs Mks/Robin opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 -opt_disable TFT_320x240 -opt_enable TOUCH_SCREEN -opt_enable TFT_480x320_SPI +opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240 +opt_enable TFT_INTERFACE_SPI TFT_RES_480x320 exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI" # cleanup diff --git a/buildroot/tests/mks_robin_pro-tests b/buildroot/tests/mks_robin_pro-tests index 7ae4670fed..50ec7b0dd1 100644 --- a/buildroot/tests/mks_robin_pro-tests +++ b/buildroot/tests/mks_robin_pro-tests @@ -13,7 +13,7 @@ opt_set X_DRIVER_TYPE TMC2209 opt_set Y_DRIVER_TYPE TMC2130 opt_set TEMP_SENSOR_BED 1 opt_disable THERMAL_PROTECTION_HOTENDS -exec_test $1 $2 "MKS Robin Pro with TMC Drivers, hotend thermal protection disabled" +exec_test $1 $2 "MKS Robin Pro, TMC Drivers, no thermal protection" # cleanup -#restore_configs +restore_configs