From 756bb5e268208af6ac7b7bd8a1ca818f55850649 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 7 Apr 2015 22:04:10 -0700 Subject: [PATCH] Cleanup formatting in hitachi & dogm lcd --- Marlin/dogm_lcd_implementation.h | 28 +-- .../ultralcd_implementation_hitachi_HD44780.h | 232 ++++++++++-------- 2 files changed, 137 insertions(+), 123 deletions(-) diff --git a/Marlin/dogm_lcd_implementation.h b/Marlin/dogm_lcd_implementation.h index 627bbc8c57..2a6d229b7f 100644 --- a/Marlin/dogm_lcd_implementation.h +++ b/Marlin/dogm_lcd_implementation.h @@ -37,8 +37,8 @@ // save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT // we don't have a big font for Cyrillic, Kana -#if defined( MAPPER_C2C3 ) || defined( MAPPER_NON ) -// #define USE_BIG_EDIT_FONT +#if defined(MAPPER_C2C3) || defined(MAPPER_NON) + //#define USE_BIG_EDIT_FONT #endif // If you have spare 2300Byte of progmem and want to use a @@ -126,17 +126,17 @@ // LCD selection #ifdef U8GLIB_ST7920 -//U8GLIB_ST7920_128X64_RRD u8g(0,0,0); -U8GLIB_ST7920_128X64_RRD u8g(0); + //U8GLIB_ST7920_128X64_RRD u8g(0,0,0); + U8GLIB_ST7920_128X64_RRD u8g(0); #elif defined(MAKRPANEL) -// The MaKrPanel display, ST7565 controller as well -U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0); + // The MaKrPanel display, ST7565 controller as well + U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0); #elif defined(VIKI2) || defined(miniVIKI) -// Mini Viki and Viki 2.0 LCD, ST7565 controller as well -U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0); + // Mini Viki and Viki 2.0 LCD, ST7565 controller as well + U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0); #else -// for regular DOGM128 display with HW-SPI -U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0 + // for regular DOGM128 display with HW-SPI + U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0 #endif #include "utf_mapper.h" @@ -188,8 +188,8 @@ char lcd_printPGM(const char* str) { static bool show_splashscreen = true; -static void lcd_implementation_init() -{ +static void lcd_implementation_init() { + #ifdef LCD_PIN_BL // Enable LCD backlight pinMode(LCD_PIN_BL, OUTPUT); digitalWrite(LCD_PIN_BL, HIGH); @@ -359,9 +359,9 @@ static void lcd_implementation_status_screen() { // Status line lcd_setFont(FONT_STATUSMENU); #ifdef USE_SMALL_INFOFONT - u8g.setPrintPos(0,62); + u8g.setPrintPos(0,62); #else - u8g.setPrintPos(0,63); + u8g.setPrintPos(0,63); #endif #ifndef FILAMENT_LCD_DISPLAY lcd_print(lcd_status_message); diff --git a/Marlin/ultralcd_implementation_hitachi_HD44780.h b/Marlin/ultralcd_implementation_hitachi_HD44780.h index 4819e3e00b..5698fd94b9 100644 --- a/Marlin/ultralcd_implementation_hitachi_HD44780.h +++ b/Marlin/ultralcd_implementation_hitachi_HD44780.h @@ -443,7 +443,7 @@ Possible status screens: 20x4 |01234567890123456789| |T000/000D B000/000D | - |X+000.0 Y+000.0 Z+000.0| + |X000 Y000 Z000.00| |F100% SD100% T--:--| |Status line.........| @@ -453,141 +453,154 @@ Possible status screens: |F100% SD100% T--:--| |Status line.........| */ -static void lcd_implementation_status_screen() -{ - int tHotend=int(degHotend(0) + 0.5); - int tTarget=int(degTargetHotend(0) + 0.5); +static void lcd_implementation_status_screen() { + int tHotend = int(degHotend(0) + 0.5); + int tTarget = int(degTargetHotend(0) + 0.5); + + #if LCD_WIDTH < 20 -#if LCD_WIDTH < 20 lcd.setCursor(0, 0); lcd.print(itostr3(tHotend)); lcd.print('/'); lcd.print(itostr3left(tTarget)); -# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 - //If we have an 2nd extruder or heated bed, show that in the top right corner - lcd.setCursor(8, 0); -# if EXTRUDERS > 1 - tHotend = int(degHotend(1) + 0.5); - tTarget = int(degTargetHotend(1) + 0.5); - lcd.print(LCD_STR_THERMOMETER[0]); -# else//Heated bed - tHotend=int(degBed() + 0.5); - tTarget=int(degTargetBed() + 0.5); - lcd.print(LCD_STR_BEDTEMP[0]); -# endif - lcd.print(itostr3(tHotend)); - lcd.print('/'); - lcd.print(itostr3left(tTarget)); -# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 + #if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 + + // If we have an 2nd extruder or heated bed, show that in the top right corner + lcd.setCursor(8, 0); + #if EXTRUDERS > 1 + tHotend = int(degHotend(1) + 0.5); + tTarget = int(degTargetHotend(1) + 0.5); + lcd.print(LCD_STR_THERMOMETER[0]); + #else // Heated bed + tHotend = int(degBed() + 0.5); + tTarget = int(degTargetBed() + 0.5); + lcd.print(LCD_STR_BEDTEMP[0]); + #endif + lcd.print(itostr3(tHotend)); + lcd.print('/'); + lcd.print(itostr3left(tTarget)); + + #endif // EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 + + #else // LCD_WIDTH > 19 -#else//LCD_WIDTH > 19 lcd.setCursor(0, 0); lcd.print(LCD_STR_THERMOMETER[0]); lcd.print(itostr3(tHotend)); lcd.print('/'); lcd.print(itostr3left(tTarget)); lcd_printPGM(PSTR(LCD_STR_DEGREE " ")); - if (tTarget < 10) - lcd.print(' '); - -# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 - //If we have an 2nd extruder or heated bed, show that in the top right corner - lcd.setCursor(10, 0); -# if EXTRUDERS > 1 - tHotend = int(degHotend(1) + 0.5); - tTarget = int(degTargetHotend(1) + 0.5); - lcd.print(LCD_STR_THERMOMETER[0]); -# else//Heated bed - tHotend=int(degBed() + 0.5); - tTarget=int(degTargetBed() + 0.5); - lcd.print(LCD_STR_BEDTEMP[0]); -# endif - lcd.print(itostr3(tHotend)); - lcd.print('/'); - lcd.print(itostr3left(tTarget)); - lcd_printPGM(PSTR(LCD_STR_DEGREE " ")); - if (tTarget < 10) - lcd.print(' '); -# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 -#endif//LCD_WIDTH > 19 - -#if LCD_HEIGHT > 2 -//Lines 2 for 4 line LCD -# if LCD_WIDTH < 20 -# ifdef SDSUPPORT - lcd.setCursor(0, 2); - lcd_printPGM(PSTR("SD")); - if (IS_SD_PRINTING) - lcd.print(itostr3(card.percentDone())); - else - lcd_printPGM(PSTR("---")); - lcd.print('%'); -# endif//SDSUPPORT -# else//LCD_WIDTH > 19 -# if EXTRUDERS > 1 && TEMP_SENSOR_BED != 0 - //If we both have a 2nd extruder and a heated bed, show the heated bed temp on the 2nd line on the left, as the first line is filled with extruder temps - tHotend=int(degBed() + 0.5); - tTarget=int(degTargetBed() + 0.5); - - lcd.setCursor(0, 1); - lcd.print(LCD_STR_BEDTEMP[0]); - lcd.print(itostr3(tHotend)); - lcd.print('/'); - lcd.print(itostr3left(tTarget)); - lcd_printPGM(PSTR(LCD_STR_DEGREE " ")); - if (tTarget < 10) - lcd.print(' '); -# else - lcd.setCursor(0,1); - lcd.print('X'); - lcd.print(ftostr3(current_position[X_AXIS])); - lcd_printPGM(PSTR(" Y")); - lcd.print(ftostr3(current_position[Y_AXIS])); -# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 -# endif//LCD_WIDTH > 19 + if (tTarget < 10) lcd.print(' '); + + #if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 + // If we have an 2nd extruder or heated bed, show that in the top right corner + lcd.setCursor(10, 0); + #if EXTRUDERS > 1 + tHotend = int(degHotend(1) + 0.5); + tTarget = int(degTargetHotend(1) + 0.5); + lcd.print(LCD_STR_THERMOMETER[0]); + #else // Heated bed + tHotend = int(degBed() + 0.5); + tTarget = int(degTargetBed() + 0.5); + lcd.print(LCD_STR_BEDTEMP[0]); + #endif + lcd.print(itostr3(tHotend)); + lcd.print('/'); + lcd.print(itostr3left(tTarget)); + lcd_printPGM(PSTR(LCD_STR_DEGREE " ")); + if (tTarget < 10) lcd.print(' '); + + #endif // EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 + + #endif // LCD_WIDTH > 19 + + #if LCD_HEIGHT > 2 + // Lines 2 for 4 line LCD + #if LCD_WIDTH < 20 + #ifdef SDSUPPORT + lcd.setCursor(0, 2); + lcd_printPGM(PSTR("SD")); + if (IS_SD_PRINTING) + lcd.print(itostr3(card.percentDone())); + else + lcd_printPGM(PSTR("---")); + lcd.print('%'); + #endif // SDSUPPORT + + #else // LCD_WIDTH > 19 + + #if EXTRUDERS > 1 && TEMP_SENSOR_BED != 0 + // If we both have a 2nd extruder and a heated bed, show the heated bed temp on the 2nd line on the left, as the first line is filled with extruder temps + tHotend = int(degBed() + 0.5); + tTarget = int(degTargetBed() + 0.5); + + lcd.setCursor(0, 1); + lcd.print(LCD_STR_BEDTEMP[0]); + lcd.print(itostr3(tHotend)); + lcd.print('/'); + lcd.print(itostr3left(tTarget)); + lcd_printPGM(PSTR(LCD_STR_DEGREE " ")); + if (tTarget < 10) lcd.print(' '); + #else + lcd.setCursor(0,1); + lcd.print('X'); + lcd.print(ftostr3(current_position[X_AXIS])); + lcd_printPGM(PSTR(" Y")); + lcd.print(ftostr3(current_position[Y_AXIS])); + #endif // EXTRUDERS > 1 || TEMP_SENSOR_BED != 0 + + #endif // LCD_WIDTH > 19 + lcd.setCursor(LCD_WIDTH - 8, 1); lcd.print('Z'); lcd.print(ftostr32sp(current_position[Z_AXIS] + 0.00001)); -#endif//LCD_HEIGHT > 2 -#if LCD_HEIGHT > 3 + #endif // LCD_HEIGHT > 2 + + #if LCD_HEIGHT > 3 + lcd.setCursor(0, 2); lcd.print(LCD_STR_FEEDRATE[0]); lcd.print(itostr3(feedmultiply)); lcd.print('%'); -# if LCD_WIDTH > 19 -# ifdef SDSUPPORT - lcd.setCursor(7, 2); - lcd_printPGM(PSTR("SD")); - if (IS_SD_PRINTING) + + #if LCD_WIDTH > 19 && defined(SDSUPPORT) + + lcd.setCursor(7, 2); + lcd_printPGM(PSTR("SD")); + if (IS_SD_PRINTING) lcd.print(itostr3(card.percentDone())); - else + else lcd_printPGM(PSTR("---")); - lcd.print('%'); -# endif//SDSUPPORT -# endif//LCD_WIDTH > 19 + lcd.print('%'); + + #endif // LCD_WIDTH > 19 && SDSUPPORT + lcd.setCursor(LCD_WIDTH - 6, 2); lcd.print(LCD_STR_CLOCK[0]); - if(starttime != 0) - { - uint16_t time = millis()/60000 - starttime/60000; - lcd.print(itostr2(time/60)); - lcd.print(':'); - lcd.print(itostr2(time%60)); - }else{ - lcd_printPGM(PSTR("--:--")); + if (starttime != 0) { + uint16_t time = millis()/60000 - starttime/60000; + lcd.print(itostr2(time/60)); + lcd.print(':'); + lcd.print(itostr2(time%60)); } -#endif + else { + lcd_printPGM(PSTR("--:--")); + } + + #endif // LCD_HEIGHT > 3 + + /** + * Display Progress Bar, Filament display, and/or Status Message on the last line + */ - // Status message line at the bottom lcd.setCursor(0, LCD_HEIGHT - 1); #ifdef LCD_PROGRESS_BAR if (card.isFileOpen()) { - uint16_t mil = millis(), diff = mil - progressBarTick; - if (diff >= PROGRESS_BAR_MSG_TIME || !lcd_status_message[0]) { + if (millis() >= progressBarTick + PROGRESS_BAR_MSG_TIME || !lcd_status_message[0]) { // draw the progress bar int tix = (int)(card.percentDone() * LCD_WIDTH * 3) / 100, cel = tix / 3, rem = tix % 3, i = LCD_WIDTH; @@ -605,11 +618,11 @@ static void lcd_implementation_status_screen() } } //card.isFileOpen - #endif //LCD_PROGRESS_BAR + #elif defined(FILAMENT_LCD_DISPLAY) - //Display both Status message line and Filament display on the last line - #ifdef FILAMENT_LCD_DISPLAY - if (message_millis + 5000 <= millis()) { //display any status for the first 5 sec after screen is initiated + // Show Filament Diameter and Volumetric Multiplier % + // After allowing lcd_status_message to show for 5 seconds + if (millis() >= message_millis + 5000) { lcd_printPGM(PSTR("Dia ")); lcd.print(ftostr12ns(filament_width_meas)); lcd_printPGM(PSTR(" V")); @@ -617,7 +630,8 @@ static void lcd_implementation_status_screen() lcd.print('%'); return; } - #endif //FILAMENT_LCD_DISPLAY + + #endif // FILAMENT_LCD_DISPLAY lcd_print(lcd_status_message); }