Add A5984 to example configurations

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/AliExpress/CL-260/Configuration.h

@@ -556,11 +556,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Anet/A6/Configuration.h

@@ -576,11 +576,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Azteeg/X5GT/Configuration.h

@@ -556,11 +556,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h

@@ -557,11 +557,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -850,6 +850,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -862,8 +863,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Creality/CR-10/Configuration.h

@@ -566,11 +566,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Creality/CR-10S/Configuration.h

@@ -560,11 +560,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Creality/CR-10mini/Configuration.h

@@ -575,11 +575,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Creality/CR-8/Configuration.h

@@ -566,11 +566,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Creality/Ender-2/Configuration.h

@@ -560,11 +560,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Creality/Ender-3/Configuration.h

@@ -560,11 +560,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Creality/Ender-4/Configuration.h

@@ -566,11 +566,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Einstart-S/Configuration_adv.h

@@ -848,8 +848,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Felix/Configuration.h

@@ -537,11 +537,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Felix/DUAL/Configuration.h

@@ -537,11 +537,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Geeetech/GT2560/Configuration.h

@@ -571,11 +571,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -556,11 +556,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -571,11 +571,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -571,11 +571,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

@@ -556,11 +556,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

@@ -556,11 +556,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/JGAurora/A5/Configuration.h

@@ -568,11 +568,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/MakerParts/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Malyan/M200/Configuration.h

@@ -555,11 +555,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Micromake/C1/basic/Configuration.h

@@ -556,11 +556,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -850,6 +850,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -862,8 +863,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h

@@ -556,11 +556,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/STM32F10/Configuration.h

@@ -558,11 +558,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/STM32F4/Configuration.h

@@ -556,11 +556,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Sanguinololu/Configuration.h

@@ -556,11 +556,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/TheBorg/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/TinyBoy2/Configuration.h

@@ -607,11 +607,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Tronxy/X1/Configuration.h

@@ -556,11 +556,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Tronxy/XY100/Configuration.h

@@ -567,11 +567,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h

@@ -556,11 +556,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  TMC2130
 #define Y_DRIVER_TYPE  TMC2130

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Velleman/K8200/Configuration.h

@@ -586,11 +586,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -845,6 +845,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -857,8 +858,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h

@@ -566,11 +566,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -844,6 +844,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -856,8 +857,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/adafruit/ST7565/Configuration.h

@@ -556,11 +556,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -844,6 +844,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -856,8 +857,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -844,6 +844,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -856,8 +857,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -632,11 +632,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -844,6 +844,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -856,8 +857,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -844,6 +844,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -856,8 +857,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/delta/kossel_mini/Configuration.h

@@ -622,11 +622,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -844,6 +844,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -856,8 +857,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/delta/kossel_pro/Configuration.h

@@ -608,11 +608,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h

@@ -849,6 +849,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -861,8 +862,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/delta/kossel_xl/Configuration.h

@@ -626,11 +626,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -844,6 +844,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -856,8 +857,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h

@@ -569,11 +569,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/makibox/Configuration.h

@@ -559,11 +559,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/stm32f103ret6/Configuration.h

@@ -558,11 +558,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -842,6 +842,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -854,8 +855,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers

Marlin/src/config/examples/wt150/Configuration.h

@@ -561,11 +561,11 @@
  * The options are used to determine driver pulse timings as well as more advanced functionality.
  * Stepper timing options can be overridden in Configuration_adv.h
  *
- * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
  *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
  *          TMC5130, TMC5130_STANDALONE
- * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
  */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -843,6 +843,7 @@
  *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  *    20 : Minimum for TMC2xxx drivers
  *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
  *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  *   650 : Minimum for DRV8825 drivers
  *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
@@ -855,8 +856,7 @@
 /**
  * Minimum stepper driver pulse width (in µs)
  *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
+ *   1 : Minimum for A4988, A5984, and LV8729 stepper drivers
  *   2 : Minimum for DRV8825 stepper drivers
  *   3 : Minimum for TB6600 stepper drivers
  *  30 : Minimum for TB6560 stepper drivers