From 72a750e0eb19f69e87cb172a9572dbb5a936ea05 Mon Sep 17 00:00:00 2001 From: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Thu, 4 Oct 2018 10:03:47 +0200 Subject: [PATCH] [2.0.x] Update Italian language (#11996) --- Marlin/src/lcd/language/language_en.h | 3 -- Marlin/src/lcd/language/language_it.h | 50 ++++++++++++++++----------- 2 files changed, 30 insertions(+), 23 deletions(-) diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h index 7b896adf76..40e84be8a1 100644 --- a/Marlin/src/lcd/language/language_en.h +++ b/Marlin/src/lcd/language/language_en.h @@ -648,9 +648,6 @@ #ifndef MSG_E6STEPS #define MSG_E6STEPS _UxGT("E6steps/mm") #endif -#ifndef MSG_E6STEPS - #define MSG_E6STEPS _UxGT("E6steps/mm") -#endif #ifndef MSG_TEMPERATURE #define MSG_TEMPERATURE _UxGT("Temperature") #endif diff --git a/Marlin/src/lcd/language/language_it.h b/Marlin/src/lcd/language/language_it.h index 129fa6c5db..b65fa0a2e1 100644 --- a/Marlin/src/lcd/language/language_it.h +++ b/Marlin/src/lcd/language/language_it.h @@ -36,7 +36,8 @@ #define MSG_BACK _UxGT("Indietro") #define MSG_SD_INSERTED _UxGT("SD Card inserita") #define MSG_SD_REMOVED _UxGT("SD Card rimossa") -#define MSG_LCD_ENDSTOPS _UxGT("Endstop") +#define MSG_LCD_ENDSTOPS _UxGT("Finecor.") // Max length 8 characters +#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Finecorsa Soft") #define MSG_MAIN _UxGT("Menu principale") #define MSG_ADVANCED_SETTINGS _UxGT("Impostaz. avanzate") #define MSG_CONFIGURATION _UxGT("Configurazione") @@ -69,6 +70,7 @@ #define MSG_PREHEAT_2_END MSG_PREHEAT_2_N _UxGT("Ugello") #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N _UxGT("Piatto") #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2_N _UxGT("conf") +#define MSG_PREHEAT_CUSTOM _UxGT("Prerisc.personaliz.") #define MSG_COOLDOWN _UxGT("Raffredda") #define MSG_SWITCH_PS_ON _UxGT("Accendi aliment.") #define MSG_SWITCH_PS_OFF _UxGT("Spegni aliment.") @@ -80,8 +82,7 @@ #define MSG_LEVEL_CORNERS _UxGT("Livella spigoli") #define MSG_NEXT_CORNER _UxGT("Prossimo spigolo") #define MSG_EDITING_STOPPED _UxGT("Modif. Mesh Fermata") -#define MSG_USER_MENU _UxGT("Comandi Utente") - +#define MSG_USER_MENU _UxGT("Comandi personaliz.") #define MSG_UBL_DOING_G29 _UxGT("G29 in corso") #define MSG_UBL_UNHOMED _UxGT("Home XYZ prima") #define MSG_UBL_TOOLS _UxGT("Strumenti UBL") @@ -89,7 +90,12 @@ #define MSG_IDEX_MENU _UxGT("Modo IDEX") #define MSG_IDEX_MODE_AUTOPARK _UxGT("Auto-Park") #define MSG_IDEX_MODE_DUPLICATE _UxGT("Duplicazione") +#define MSG_IDEX_MODE_SCALED_COPY _UxGT("Copia scalata") #define MSG_IDEX_MODE_FULL_CTRL _UxGT("Pieno controllo") +#define MSG_IDEX_X_OFFSET _UxGT("2° ugello X") +#define MSG_IDEX_Y_OFFSET _UxGT("2° ugello Y") +#define MSG_IDEX_Z_OFFSET _UxGT("2° ugello Z") +#define MSG_IDEX_SAVE_OFFSETS _UxGT("Memorizza Offsets") #define MSG_UBL_MANUAL_MESH _UxGT("Mesh Manuale") #define MSG_UBL_BC_INSERT _UxGT("Metti spes. e misura") #define MSG_UBL_BC_INSERT2 _UxGT("Misura") @@ -97,15 +103,15 @@ #define MSG_UBL_MOVING_TO_NEXT _UxGT("Spostamento succes.") #define MSG_UBL_ACTIVATE_MESH _UxGT("Attiva UBL") #define MSG_UBL_DEACTIVATE_MESH _UxGT("Disattiva UBL") -#define MSG_UBL_SET_BED_TEMP _UxGT("Temp Piatto") +#define MSG_UBL_SET_BED_TEMP _UxGT("Temp. Piatto") #define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP -#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temp Ugello") +#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temp. Ugello") #define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP #define MSG_UBL_MESH_EDIT _UxGT("Modifica Mesh") -#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Modif Custom Mesh") +#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Modif.Mesh personal.") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Ritocca Mesh") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Modif.Mesh fatta") -#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Crea Mesh Custom") +#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Crea Mesh personal.") #define MSG_UBL_BUILD_MESH_MENU _UxGT("Crea Mesh") #define MSG_UBL_BUILD_PLA_MESH _UxGT("Crea Mesh PLA") #define MSG_UBL_BUILD_ABS_MESH _UxGT("Crea Mesh ABS") @@ -115,7 +121,7 @@ #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Valida Mesh") #define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Valida Mesh PLA") #define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Valida Mesh ABS") -#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valida Mesh Custom") +#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valida Mesh pers.") #define MSG_UBL_CONTINUE_MESH _UxGT("Continua Mesh") #define MSG_UBL_MESH_LEVELING _UxGT("Livell. Mesh") #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Livell. 3 Punti") @@ -174,7 +180,7 @@ #define MSG_MOVE_Y _UxGT("Muovi Y") #define MSG_MOVE_Z _UxGT("Muovi Z") #define MSG_MOVE_E _UxGT("Estrusore") -#define MSG_MOVE_01MM _UxGT("Muovi di 0.1mm") +#define MSG_MOVE_01MM _UxGT("Muovi di 0,1mm") #define MSG_MOVE_1MM _UxGT("Muovi di 1mm") #define MSG_MOVE_10MM _UxGT("Muovi di 10mm") #define MSG_SPEED _UxGT("Velocità") @@ -215,7 +221,7 @@ #define MSG_VTRAV_MIN _UxGT("VTrav min") #define MSG_ACCELERATION _UxGT("Accelerazione") #define MSG_AMAX _UxGT("Amax ") -#define MSG_A_RETRACT _UxGT("A-retract") +#define MSG_A_RETRACT _UxGT("A-Ritrazione") #define MSG_A_TRAVEL _UxGT("A-Spostamento") #define MSG_STEPS_PER_MM _UxGT("Passi/mm") #if IS_KINEMATIC @@ -243,15 +249,15 @@ #define MSG_FILAMENT_LOAD _UxGT("Carica mm") #define MSG_ADVANCE_K _UxGT("K Avanzamento") #define MSG_CONTRAST _UxGT("Contrasto LCD") -#define MSG_STORE_EEPROM _UxGT("Salva in memoria") -#define MSG_LOAD_EEPROM _UxGT("Carica da memoria") +#define MSG_STORE_EEPROM _UxGT("Salva impostazioni") +#define MSG_LOAD_EEPROM _UxGT("Carica impostazioni") #define MSG_RESTORE_FAILSAFE _UxGT("Ripristina imp.") #define MSG_INIT_EEPROM _UxGT("Inizializza EEPROM") #define MSG_REFRESH _UxGT("Aggiorna") #define MSG_WATCH _UxGT("Schermata info") #define MSG_PREPARE _UxGT("Prepara") #define MSG_TUNE _UxGT("Regola") -#define MSG_PAUSE_PRINT _UxGT("Pausa") +#define MSG_PAUSE_PRINT _UxGT("Pausa stampa") #define MSG_RESUME_PRINT _UxGT("Riprendi stampa") #define MSG_STOP_PRINT _UxGT("Arresta stampa") #define MSG_POWER_LOSS_RECOVERY _UxGT("Ripresa da PowerLoss") @@ -287,13 +293,15 @@ #define MSG_BLTOUCH_RESET _UxGT("Resetta BLTouch") #define MSG_BLTOUCH_DEPLOY _UxGT("Estendi BLTouch") #define MSG_BLTOUCH_STOW _UxGT("Ritrai BLTouch") +#define MSG_MANUAL_DEPLOY _UxGT("Estendi Sonda-Z") +#define MSG_MANUAL_STOW _UxGT("Ritrai Sonda-Z") #define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST _UxGT("prima") -#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset") +#define MSG_ZPROBE_ZOFFSET _UxGT("Offset sonda Z") #define MSG_BABYSTEP_X _UxGT("Babystep X") #define MSG_BABYSTEP_Y _UxGT("Babystep Y") #define MSG_BABYSTEP_Z _UxGT("Babystep Z") -#define MSG_ENDSTOP_ABORT _UxGT("Finecorsa abort") +#define MSG_ENDSTOP_ABORT _UxGT("Finecorsa annullati") #define MSG_HEATING_FAILED_LCD _UxGT("Riscald. Fallito") #define MSG_HEATING_FAILED_LCD_BED _UxGT("Risc. piatto fallito") #define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: TEMP RIDONDANTE") @@ -321,7 +329,7 @@ #define MSG_DELTA_SETTINGS _UxGT("Impostaz. Delta") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto calibrazione") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Imp. altezza Delta") -#define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Probe Z-offset") +#define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Offset sonda-Z") #define MSG_DELTA_DIAG_ROD _UxGT("Barra Diagonale") #define MSG_DELTA_HEIGHT _UxGT("Altezza") #define MSG_DELTA_RADIUS _UxGT("Raggio") @@ -363,15 +371,18 @@ #define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("CARICA FILAMENTO") #define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("RIMUOVI FILAMENTO") #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPZIONI RIPRESA:") -#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Libera di piu") +#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Spurga di più") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Riprendi stampa") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Ugello: ") +#define MSG_RUNOUT_SENSOR_ENABLE _UxGT("Sens.filo terminato") #define MSG_ERR_HOMING_FAILED _UxGT("Home fallito") -#define MSG_ERR_PROBING_FAILED _UxGT("Probing fallito") +#define MSG_ERR_PROBING_FAILED _UxGT("Sondaggio fallito") #define MSG_M600_TOO_COLD _UxGT("M600:Troppo freddo") +// +// Le schermate di Filament Change mostrano fino a 3 linee su un display a 4 righe +// ...o fino a 2 linee su un display a 3 righe. #if LCD_HEIGHT >= 4 - // Up to 3 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere avvio") #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("del cambio") #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("di filamento") @@ -395,7 +406,6 @@ #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("la ripresa") #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("della stampa") #else // LCD_HEIGHT < 4 - // Up to 2 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere...") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Espulsione...") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci e premi")