Browse Source

Update some pins errors

vanilla_fb_2.0.x
Scott Lahteine 4 years ago
parent
commit
7243ea549d
  1. 2
      Marlin/src/pins/ramps/pins_LONGER3D_LKx_PRO.h
  2. 2
      Marlin/src/pins/ramps/pins_RAMPS_ENDER_4.h
  3. 2
      Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h
  4. 2
      Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
  5. 4
      Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h
  6. 2
      Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h
  7. 2
      Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h
  8. 2
      Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h
  9. 2
      Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h
  10. 2
      Marlin/src/pins/stm32f4/pins_LERDGE_X.h
  11. 2
      Marlin/src/pins/stm32f7/pins_REMRAM_V1.h

2
Marlin/src/pins/ramps/pins_LONGER3D_LKx_PRO.h

@ -28,7 +28,7 @@
#if NOT_TARGET(__AVR_ATmega2560__) #if NOT_TARGET(__AVR_ATmega2560__)
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1 #elif HOTENDS > 1 || E_STEPPERS > 1
#error "Longer3D LGT KIT V1.0 board only supports 1 hotend / E-stepper. Comment out this line to continue." #error "Longer3D LGT KIT V1.0 board only supports one hotend / E-stepper. Comment out this line to continue."
#endif #endif
#if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1 #if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1

2
Marlin/src/pins/ramps/pins_RAMPS_ENDER_4.h

@ -22,7 +22,7 @@
#pragma once #pragma once
#if HOTENDS > 1 || E_STEPPERS > 1 #if HOTENDS > 1 || E_STEPPERS > 1
#error "Ender-4 supports only 1 hotend / E-stepper. Comment out this line to continue." #error "Ender-4 only supports one hotend / E-stepper. Comment out this line to continue."
#endif #endif
#define BOARD_INFO_NAME "Ender-4" #define BOARD_INFO_NAME "Ender-4"

2
Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h

@ -24,7 +24,7 @@
#if NOT_TARGET(TARGET_STM32F1) #if NOT_TARGET(TARGET_STM32F1)
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1 #elif HOTENDS > 1 || E_STEPPERS > 1
#error "CCROBOT-ONLINE MEEB_3DP only supports 1 hotend / E-stepper. Comment out this line to continue." #error "CCROBOT-ONLINE MEEB_3DP only supports one hotend / E-stepper. Comment out this line to continue."
#endif #endif
// https://github.com/ccrobot-online/MEEB_3DP // https://github.com/ccrobot-online/MEEB_3DP

2
Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h

@ -32,7 +32,7 @@
#if NOT_TARGET(__STM32F1__, STM32F1xx) #if NOT_TARGET(__STM32F1__, STM32F1xx)
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1 #elif HOTENDS > 1 || E_STEPPERS > 1
#error "FLSUN HiSpeedV1 supports 1 hotend / E-stepper. Comment out this line to continue." #error "FLSUN HiSpeedV1 only supports one hotend / E-stepper. Comment out this line to continue."
#endif #endif
#define BOARD_INFO_NAME "FLSun HiSpeedV1" #define BOARD_INFO_NAME "FLSun HiSpeedV1"

4
Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h

@ -31,10 +31,10 @@
#if NOT_TARGET(__STM32F1__) #if NOT_TARGET(__STM32F1__)
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1 #elif HOTENDS > 1 || E_STEPPERS > 1
#error "JGAurora 32-bit board only supports 1 hotend / E-stepper. Comment out this line to continue." #error "JGAurora A5S A1 only supports one hotend / E-stepper. Comment out this line to continue."
#endif #endif
#define BOARD_INFO_NAME "JGAurora A5S A1 board" #define BOARD_INFO_NAME "JGAurora A5S A1"
#define BOARD_NO_NATIVE_USB #define BOARD_NO_NATIVE_USB

2
Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h

@ -25,7 +25,7 @@
#if NOT_TARGET(__STM32F1__, STM32F1xx) #if NOT_TARGET(__STM32F1__, STM32F1xx)
#error "Oops! Select a STM32F1 board in 'Tools > Board.'" #error "Oops! Select a STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1 #elif HOTENDS > 1 || E_STEPPERS > 1
#error "Longer3D board only supports 1 hotend / E-stepper. Comment out this line to continue." #error "Longer3D only supports one hotend / E-stepper. Comment out this line to continue."
#endif #endif
#define BOARD_INFO_NAME "Longer3D" #define BOARD_INFO_NAME "Longer3D"

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h

@ -24,7 +24,7 @@
#if NOT_TARGET(__STM32F1__) #if NOT_TARGET(__STM32F1__)
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1 #elif HOTENDS > 1 || E_STEPPERS > 1
#error "MKS Robin Lite supports only 1 hotend / E-stepper. Comment out this line to continue." #error "MKS Robin Lite only supports one hotend / E-stepper. Comment out this line to continue."
#endif #endif
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h

@ -28,7 +28,7 @@
#if NOT_TARGET(__STM32F1__) #if NOT_TARGET(__STM32F1__)
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1 #elif HOTENDS > 1 || E_STEPPERS > 1
#error "MKS Robin mini only supports 1 hotend / E-stepper. Comment out this line to continue." #error "MKS Robin mini only supports one hotend / E-stepper. Comment out this line to continue."
#endif #endif
#define BOARD_INFO_NAME "MKS Robin Mini" #define BOARD_INFO_NAME "MKS Robin Mini"

2
Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h

@ -24,7 +24,7 @@
#if NOT_TARGET(STM32F4) #if NOT_TARGET(STM32F4)
#error "Oops! Select an STM32F4 board in 'Tools > Board.'" #error "Oops! Select an STM32F4 board in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1 #elif HOTENDS > 1 || E_STEPPERS > 1
#error "BIGTREE BTT002 V1.0 only supports one hotend / E-stepper." #error "BIGTREE BTT002 V1.0 only supports one hotend / E-stepper. Comment out this line to continue."
#endif #endif
#define BOARD_INFO_NAME "BTT BTT002 V1.0" #define BOARD_INFO_NAME "BTT BTT002 V1.0"

2
Marlin/src/pins/stm32f4/pins_LERDGE_X.h

@ -21,7 +21,7 @@
#if NOT_TARGET(STM32F4, STM32F4xx) #if NOT_TARGET(STM32F4, STM32F4xx)
#error "Oops! Select an STM32F4 board in 'Tools > Board.'" #error "Oops! Select an STM32F4 board in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1 #elif HOTENDS > 1 || E_STEPPERS > 1
#error "LERDGE X only supports one hotend / E-steppers" #error "LERDGE X only supports one hotend / E-stepper. Comment out this line to continue."
#endif #endif
#define BOARD_INFO_NAME "Lerdge X" #define BOARD_INFO_NAME "Lerdge X"

2
Marlin/src/pins/stm32f7/pins_REMRAM_V1.h

@ -33,7 +33,7 @@
#endif #endif
#if HOTENDS > 1 || E_STEPPERS > 1 #if HOTENDS > 1 || E_STEPPERS > 1
#error "RemRam only supports one hotend / E-stepper." #error "RemRam only supports one hotend / E-stepper. Comment out this line to continue."
#endif #endif
// //

Loading…
Cancel
Save