Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS (#13439)

Marlin/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/src/lcd/menu/menu_bed_corners.cpp

@@ -36,6 +36,10 @@
   #define LEVEL_CORNERS_Z_HOP 4.0
 #endif
 
+#ifndef LEVEL_CORNERS_HEIGHT
+  #define LEVEL_CORNERS_HEIGHT 0.0
+#endif
+
 static_assert(LEVEL_CORNERS_Z_HOP >= 0, "LEVEL_CORNERS_Z_HOP must be >= 0. Please update your configuration.");
 
 /**
@@ -66,7 +70,7 @@ void _lcd_goto_next_corner() {
     #endif
   }
   planner.buffer_line(current_position, MMM_TO_MMS(manual_feedrate_mm_m[X_AXIS]), active_extruder);
-  line_to_z(0.0);
+  line_to_z(LEVEL_CORNERS_HEIGHT);
   if (++bed_corner > 3
     #if ENABLED(LEVEL_CENTER_TOO)
       + 1

config/default/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -1243,6 +1243,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/AlephObjects/TAZ4/Configuration.h

@@ -1257,6 +1257,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/AliExpress/CL-260/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -1248,6 +1248,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Anet/A2/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Anet/A2plus/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Anet/A6/Configuration.h

@@ -1375,6 +1375,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Anet/A8/Configuration.h

@@ -1250,6 +1250,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/AnyCubic/i3/Configuration.h

@@ -1247,6 +1247,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/ArmEd/Configuration.h

@@ -1238,6 +1238,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Azteeg/X5GT/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/BIBO/TouchX/default/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/BQ/Hephestos/Configuration.h

@@ -1225,6 +1225,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/BQ/Hephestos_2/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/BQ/WITBOX/Configuration.h

@@ -1225,6 +1225,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Cartesio/Configuration.h

@@ -1236,6 +1236,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Creality/CR-10/Configuration.h

@@ -1247,6 +1247,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Creality/CR-10S/Configuration.h

@@ -1238,6 +1238,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Creality/CR-10_5S/Configuration.h

@@ -1240,6 +1240,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Creality/CR-10mini/Configuration.h

@@ -1256,6 +1256,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Creality/CR-8/Configuration.h

@@ -1247,6 +1247,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Creality/Ender-2/Configuration.h

@@ -1241,6 +1241,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Creality/Ender-3/Configuration.h

@@ -1241,6 +1241,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Creality/Ender-4/Configuration.h

@@ -1247,6 +1247,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Einstart-S/Configuration.h

@@ -1247,6 +1247,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Felix/Configuration.h

@@ -1219,6 +1219,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Felix/DUAL/Configuration.h

@@ -1219,6 +1219,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/FolgerTech/i3-2020/Configuration.h

@@ -1243,6 +1243,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Formbot/Raptor/Configuration.h

@@ -1342,6 +1342,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Formbot/T_Rex_2+/Configuration.h

@@ -1272,6 +1272,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Formbot/T_Rex_3/Configuration.h

@@ -1262,6 +1262,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Geeetech/A10M/Configuration.h

@@ -1222,6 +1222,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Geeetech/A20M/Configuration.h

@@ -1222,6 +1222,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Geeetech/GT2560/Configuration.h

@@ -1252,6 +1252,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -1230,6 +1230,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Geeetech/MeCreator2/Configuration.h

@@ -1244,6 +1244,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -1253,6 +1253,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -1252,6 +1252,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Infitary/i3-M508/Configuration.h

@@ -1241,6 +1241,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/JGAurora/A5/Configuration.h

@@ -1249,6 +1249,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/MakerParts/Configuration.h

@@ -1257,6 +1257,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Malyan/M150/Configuration.h

@@ -1265,6 +1265,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Malyan/M200/Configuration.h

@@ -1236,6 +1236,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Micromake/C1/basic/Configuration.h

@@ -1241,6 +1241,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Micromake/C1/enhanced/Configuration.h

@@ -1241,6 +1241,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Mks/Robin/Configuration.h

@@ -1238,6 +1238,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Mks/Sbase/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Printrbot/PrintrboardG2/Configuration.h

@@ -1245,6 +1245,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/RapideLite/RL200/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/RepRapPro/Huxley/Configuration.h

@@ -1286,6 +1286,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/RigidBot/Configuration.h

@@ -1235,6 +1235,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/SCARA/Configuration.h

@@ -1250,6 +1250,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/STM32F10/Configuration.h

@@ -1239,6 +1239,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/STM32F4/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Sanguinololu/Configuration.h

@@ -1268,6 +1268,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/TheBorg/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/TinyBoy2/Configuration.h

@@ -1293,6 +1293,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Tronxy/X1/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Tronxy/X3A/Configuration.h

@@ -1241,6 +1241,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Tronxy/X5S-2E/Configuration.h

@@ -1258,6 +1258,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Tronxy/X5S/Configuration.h

@@ -1236,6 +1236,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Tronxy/XY100/Configuration.h

@@ -1248,6 +1248,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/UltiMachine/Archim1/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/UltiMachine/Archim2/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/VORONDesign/Configuration.h

@@ -1246,6 +1246,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Velleman/K8200/Configuration.h

@@ -1267,6 +1267,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Velleman/K8400/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Velleman/K8400/Dual-head/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/WASP/PowerWASP/Configuration.h

@@ -1256,6 +1256,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/Wanhao/Duplicator 6/Configuration.h

@@ -1247,6 +1247,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/adafruit/ST7565/Configuration.h

@@ -1237,6 +1237,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/delta/Anycubic/Kossel/Configuration.h

@@ -1428,6 +1428,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -1366,6 +1366,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/delta/FLSUN/kossel/Configuration.h

@@ -1365,6 +1365,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -1365,6 +1365,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/delta/Geeetech/Rostock 301/Configuration.h

@@ -1356,6 +1356,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/delta/Hatchbox_Alpha/Configuration.h

@@ -1368,6 +1368,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/delta/MKS/SBASE/Configuration.h

@@ -1353,6 +1353,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/delta/Tevo Little Monster/Configuration.h

@@ -1350,6 +1350,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/delta/generic/Configuration.h

@@ -1353,6 +1353,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/delta/kossel_mini/Configuration.h

@@ -1355,6 +1355,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/delta/kossel_pro/Configuration.h

@@ -1356,6 +1356,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/delta/kossel_xl/Configuration.h

@@ -1356,6 +1356,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/gCreate/gMax1.5+/Configuration.h

@@ -1244,6 +1244,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/makibox/Configuration.h

@@ -1240,6 +1240,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/stm32f103ret6/Configuration.h

@@ -1239,6 +1239,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/tvrrug/Round2/Configuration.h

@@ -1232,6 +1232,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

config/examples/wt150/Configuration.h

@@ -1242,6 +1242,7 @@
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
   #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif