andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Updates for L64XX

pull/1/head
Scott Lahteine 5 years ago
parent
f6a6839a82
commit
707349d492
10 changed files with 180 additions and 178 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 4
      Marlin/src/gcode/calibrate/G28.cpp
  2. 30
      Marlin/src/gcode/feature/L6470/M906.cpp
  3. 6
      Marlin/src/inc/Conditionals_post.h
  4. 42
      Marlin/src/libs/L64XX/L64XX_Marlin.cpp
  5. 10
      Marlin/src/libs/L64XX/L64XX_Marlin.h
  6. 2
      Marlin/src/module/stepper.cpp
  7. 156
      Marlin/src/module/stepper/L64xx.h
  8. 28
      Marlin/src/module/stepper/TMC26X.h
  9. 54
      Marlin/src/module/stepper/indirection.h
  10. 26
      Marlin/src/module/stepper/trinamic.h

4
Marlin/src/gcode/calibrate/G28.cpp
View File

@ -530,14 +530,14 @@ void GcodeSuite::G28(const bool always_home_all) {
// Set L6470 absolute position registers to counts
// constexpr *might* move this to PROGMEM.
// If not, this will need a PROGMEM directive and an accessor.
static constexpr AxisEnum L6470_axis_xref[MAX_L6470] = {
static constexpr AxisEnum L64XX_axis_xref[MAX_L64XX] = {
X_AXIS, Y_AXIS, Z_AXIS,
X_AXIS, Y_AXIS, Z_AXIS, Z_AXIS,
E_AXIS, E_AXIS, E_AXIS, E_AXIS, E_AXIS, E_AXIS
};
for (uint8_t j = 1; j <= L64XX::chain[0]; j++) {
const uint8_t cv = L64XX::chain[j];
L64xxManager.set_param((L64XX_axis_t)cv, L6470_ABS_POS, stepper.position(L6470_axis_xref[cv]));
L64xxManager.set_param((L64XX_axis_t)cv, L6470_ABS_POS, stepper.position(L64XX_axis_xref[cv]));
}
#endif
}

30
Marlin/src/gcode/feature/L6470/M906.cpp
View File

@ -77,7 +77,7 @@
* KVAL_DEC
* Vs compensation (if enabled)
*/
void L6470_report_current(L64XX &motor, const L64XX_axis_t axis) {
void L64XX_report_current(L64XX &motor, const L64XX_axis_t axis) {
if (L64xxManager.spi_abort) return; // don't do anything if set_directions() has occurred
@ -303,48 +303,48 @@ void GcodeSuite::M906() {
}
if (report_current) {
#define L6470_REPORT_CURRENT(Q) L6470_report_current(stepper##Q, Q)
#define L64XX_REPORT_CURRENT(Q) L64XX_report_current(stepper##Q, Q)
L64xxManager.spi_active = true; // Tell set_directions() a series of SPI transfers is underway
#if AXIS_IS_L64XX(X)
L6470_REPORT_CURRENT(X);
L64XX_REPORT_CURRENT(X);
#endif
#if AXIS_IS_L64XX(X2)
L6470_REPORT_CURRENT(X2);
L64XX_REPORT_CURRENT(X2);
#endif
#if AXIS_IS_L64XX(Y)
L6470_REPORT_CURRENT(Y);
L64XX_REPORT_CURRENT(Y);
#endif
#if AXIS_IS_L64XX(Y2)
L6470_REPORT_CURRENT(Y2);
L64XX_REPORT_CURRENT(Y2);
#endif
#if AXIS_IS_L64XX(Z)
L6470_REPORT_CURRENT(Z);
L64XX_REPORT_CURRENT(Z);
#endif
#if AXIS_IS_L64XX(Z2)
L6470_REPORT_CURRENT(Z2);
L64XX_REPORT_CURRENT(Z2);
#endif
#if AXIS_IS_L64XX(Z3)
L6470_REPORT_CURRENT(Z3);
L64XX_REPORT_CURRENT(Z3);
#endif
#if AXIS_IS_L64XX(E0)
L6470_REPORT_CURRENT(E0);
L64XX_REPORT_CURRENT(E0);
#endif
#if AXIS_IS_L64XX(E1)
L6470_REPORT_CURRENT(E1);
L64XX_REPORT_CURRENT(E1);
#endif
#if AXIS_IS_L64XX(E2)
L6470_REPORT_CURRENT(E2);
L64XX_REPORT_CURRENT(E2);
#endif
#if AXIS_IS_L64XX(E3)
L6470_REPORT_CURRENT(E3);
L64XX_REPORT_CURRENT(E3);
#endif
#if AXIS_IS_L64XX(E4)
L6470_REPORT_CURRENT(E4);
L64XX_REPORT_CURRENT(E4);
#endif
#if AXIS_IS_L64XX(E5)
L6470_REPORT_CURRENT(E5);
L64XX_REPORT_CURRENT(E5);
#endif
L64xxManager.spi_active = false; // done with all SPI transfers - clear handshake flags

6
Marlin/src/inc/Conditionals_post.h
View File

@ -1030,7 +1030,9 @@
#define HAS_Z_MIN_PROBE_PIN (HAS_CUSTOM_PROBE_PIN && PIN_EXISTS(Z_MIN_PROBE))
#define HAS_CALIBRATION_PIN (PIN_EXISTS(CALIBRATION))
//
// ADC Temp Sensors (Thermistor or Thermocouple with amplifier ADC interface)
//
#define HAS_ADC_TEST(P) (PIN_EXISTS(TEMP_##P) && TEMP_SENSOR_##P != 0 && DISABLED(HEATER_##P##_USES_MAX6675))
#define HAS_TEMP_ADC_0 HAS_ADC_TEST(0)
#define HAS_TEMP_ADC_1 HAS_ADC_TEST(1)
@ -1145,7 +1147,9 @@
#define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS))
#define HAS_MOTOR_CURRENT_PWM ANY_PIN(MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y, MOTOR_CURRENT_PWM_XY, MOTOR_CURRENT_PWM_Z, MOTOR_CURRENT_PWM_E)
#define HAS_MICROSTEPS (HAS_X_MICROSTEPS || HAS_X2_MICROSTEPS || HAS_Y_MICROSTEPS || HAS_Y2_MICROSTEPS || HAS_Z_MICROSTEPS || HAS_Z2_MICROSTEPS || HAS_Z3_MICROSTEPS || HAS_E0_MICROSTEPS || HAS_E1_MICROSTEPS || HAS_E2_MICROSTEPS || HAS_E3_MICROSTEPS || HAS_E4_MICROSTEPS || HAS_E5_MICROSTEPS)
#define HAS_SOME_Z_MICROSTEPS (HAS_Z_MICROSTEPS || HAS_Z2_MICROSTEPS || HAS_Z3_MICROSTEPS)
#define HAS_SOME_E_MICROSTEPS (HAS_E0_MICROSTEPS || HAS_E1_MICROSTEPS || HAS_E2_MICROSTEPS || HAS_E3_MICROSTEPS || HAS_E4_MICROSTEPS || HAS_E5_MICROSTEPS)
#define HAS_MICROSTEPS (HAS_X_MICROSTEPS || HAS_X2_MICROSTEPS || HAS_Y_MICROSTEPS || HAS_Y2_MICROSTEPS || HAS_SOME_Z_MICROSTEPS || HAS_SOME_E_MICROSTEPS)
#if HAS_MICROSTEPS

42
Marlin/src/libs/L64XX/L64XX_Marlin.cpp
View File

@ -39,34 +39,34 @@ L64XX_Marlin L64xxManager;
void echo_yes_no(const bool yes) { serialprintPGM(yes ? PSTR(" YES") : PSTR(" NO ")); }
char L64XX_Marlin::index_to_axis[MAX_L6470][3] = { "X ", "Y ", "Z ", "X2", "Y2", "Z2", "Z3", "E0", "E1", "E2", "E3", "E4", "E5" };
char L64XX_Marlin::index_to_axis[MAX_L64XX][3] = { "X ", "Y ", "Z ", "X2", "Y2", "Z2", "Z3", "E0", "E1", "E2", "E3", "E4", "E5" };
#define DEBUG_OUT ENABLED(L6470_CHITCHAT)
#include "../../core/debug_out.h"
uint8_t L64XX_Marlin::dir_commands[MAX_L6470]; // array to hold direction command for each driver
uint8_t L64XX_Marlin::dir_commands[MAX_L64XX]; // array to hold direction command for each driver
uint8_t L64XX_Marlin::index_to_dir[MAX_L6470] = { (INVERT_X_DIR) , // 0 X
(INVERT_Y_DIR) , // 1 Y
(INVERT_Z_DIR) , // 2 Z
#if ENABLED(X_DUAL_STEPPER_DRIVERS)
(INVERT_X_DIR) ^ (INVERT_X2_VS_X_DIR) , // 3 X2
uint8_t L64XX_Marlin::index_to_dir[MAX_L64XX] = { (INVERT_X_DIR), // 0 X
(INVERT_Y_DIR), // 1 Y
(INVERT_Z_DIR), // 2 Z
#if ENABLED(X_DUAL_STEPPER_DRIVERS) // 3 X2
(INVERT_X_DIR) ^ (INVERT_X2_VS_X_DIR),
#else
(INVERT_X_DIR) , // 3 X2
(INVERT_X_DIR),
#endif
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
(INVERT_Y_DIR) ^ (INVERT_Y2_VS_Y_DIR) , // 4 Y2
#if ENABLED(Y_DUAL_STEPPER_DRIVERS) // 4 Y2
(INVERT_Y_DIR) ^ (INVERT_Y2_VS_Y_DIR),
#else
(INVERT_Y_DIR) , // 4 Y2
(INVERT_Y_DIR),
#endif
(INVERT_Z_DIR) , // 5 Z2
(INVERT_Z_DIR) , // 6 Z3
(INVERT_E0_DIR) , // 7 E0
(INVERT_E1_DIR) , // 8 E1
(INVERT_E2_DIR) , // 9 E2
(INVERT_E3_DIR) , // 10 E3
(INVERT_E4_DIR) , // 11 E4
(INVERT_E5_DIR) , // 12 E5
(INVERT_Z_DIR), // 5 Z2
(INVERT_Z_DIR), // 6 Z3
(INVERT_E0_DIR), // 7 E0
(INVERT_E1_DIR), // 8 E1
(INVERT_E2_DIR), // 9 E2
(INVERT_E3_DIR), // 10 E3
(INVERT_E4_DIR), // 11 E4
(INVERT_E5_DIR), // 12 E5
};
volatile uint8_t L64XX_Marlin::spi_abort = false;
@ -367,7 +367,7 @@ uint8_t L64XX_Marlin::get_user_input(uint8_t &driver_count, L64XX_axis_t axis_in
uint8_t driver_count_local = 0; // Can't use "driver_count" directly as a subscript because it's passed by reference
if (axis_offset >= 2 || axis_mon[0][0] == 'E') { // Single axis, E0, or E1
axis_mon[0][1] = axis_offset + '0';
for (j = 0; j < MAX_L6470; j++) { // See how many drivers on this axis
for (j = 0; j < MAX_L64XX; j++) { // See how many drivers on this axis
const char * const str = index_to_axis[j];
if (axis_mon[0][0] == str[0]) {
char * const mon = axis_mon[driver_count_local];
@ -380,7 +380,7 @@ uint8_t L64XX_Marlin::get_user_input(uint8_t &driver_count, L64XX_axis_t axis_in
}
}
else if (axis_offset == 0) { // One or more axes
for (j = 0; j < MAX_L6470; j++) { // See how many drivers on this axis
for (j = 0; j < MAX_L64XX; j++) { // See how many drivers on this axis
const char * const str = index_to_axis[j];
if (axis_mon[0][0] == str[0]) {
char * const mon = axis_mon[driver_count_local];

10
Marlin/src/libs/L64XX/L64XX_Marlin.h
View File

@ -30,21 +30,19 @@
#define L6470_GETPARAM(P,Q) stepper##Q.GetParam(P)
#define MAX_L6470 (7 + MAX_EXTRUDERS) // Maximum number of axes in Marlin
#define dSPIN_STEP_CLOCK 0x58
#define dSPIN_STEP_CLOCK_FWD dSPIN_STEP_CLOCK
#define dSPIN_STEP_CLOCK_REV dSPIN_STEP_CLOCK+1
#define HAS_L64XX_EXTRUDER (AXIS_IS_L64XX(E0) || AXIS_IS_L64XX(E1) || AXIS_IS_L64XX(E2) || AXIS_IS_L64XX(E3) || AXIS_IS_L64XX(E4) || AXIS_IS_L64XX(E5))
typedef enum : uint8_t { X, Y, Z, X2, Y2, Z2, Z3, E0, E1, E2, E3, E4, E5 } L64XX_axis_t;
enum L64XX_axis_t : uint8_t { X, Y, Z, X2, Y2, Z2, Z3, E0, E1, E2, E3, E4, E5, MAX_L64XX };
class L64XX_Marlin : public L64XXHelper {
public:
static char index_to_axis[MAX_L6470][3];
static char index_to_axis[MAX_L64XX][3];
static uint8_t index_to_dir[MAX_L6470];
static uint8_t dir_commands[MAX_L6470];
static uint8_t index_to_dir[MAX_L64XX];
static uint8_t dir_commands[MAX_L64XX];
// Flags to guarantee graceful switch if stepper interrupts L6470 SPI transfer
static volatile uint8_t spi_abort;

2
Marlin/src/module/stepper.cpp
View File

@ -119,7 +119,7 @@ Stepper stepper; // Singleton
#if HAS_L64XX
#include "../libs/L64XX/L64XX_Marlin.h"
uint8_t L6470_buf[MAX_L6470 + 1]; // chip command sequence - element 0 not used
uint8_t L6470_buf[MAX_L64XX + 1]; // chip command sequence - element 0 not used
bool L64XX_OK_to_power_up = false; // flag to keep L64xx steppers powered down after a reset or power up
#endif

156
Marlin/src/module/stepper/L64xx.h
View File

@ -44,220 +44,220 @@
// X Stepper
#if AXIS_IS_L64XX(X)
extern L64XX_CLASS(X) stepperX;
#define X_ENABLE_INIT NOOP
#define X_ENABLE_INIT() NOOP
#define X_ENABLE_WRITE(STATE) (STATE ? NOOP : stepperX.free())
#define X_ENABLE_READ (stepperX.getStatus() & STATUS_HIZ)
#define X_ENABLE_READ() (stepperX.getStatus() & STATUS_HIZ)
#if AXIS_DRIVER_TYPE_X(L6474)
#define X_DIR_INIT SET_OUTPUT(X_DIR_PIN)
#define X_DIR_INIT() SET_OUTPUT(X_DIR_PIN)
#define X_DIR_WRITE(STATE) L6474_DIR_WRITE(X, STATE)
#define X_DIR_READ READ(X_DIR_PIN)
#define X_DIR_READ() READ(X_DIR_PIN)
#else
#define X_DIR_INIT NOOP
#define X_DIR_INIT() NOOP
#define X_DIR_WRITE(STATE) L64XX_DIR_WRITE(X, STATE)
#define X_DIR_READ (stepper##X.getStatus() & STATUS_DIR);
#define X_DIR_READ() (stepper##X.getStatus() & STATUS_DIR);
#endif
#endif
// Y Stepper
#if AXIS_IS_L64XX(Y)
extern L64XX_CLASS(Y) stepperY;
#define Y_ENABLE_INIT NOOP
#define Y_ENABLE_INIT() NOOP
#define Y_ENABLE_WRITE(STATE) (STATE ? NOOP : stepperY.free())
#define Y_ENABLE_READ (stepperY.getStatus() & STATUS_HIZ)
#define Y_ENABLE_READ() (stepperY.getStatus() & STATUS_HIZ)
#if AXIS_DRIVER_TYPE_Y(L6474)
#define Y_DIR_INIT SET_OUTPUT(Y_DIR_PIN)
#define Y_DIR_INIT() SET_OUTPUT(Y_DIR_PIN)
#define Y_DIR_WRITE(STATE) L6474_DIR_WRITE(Y, STATE)
#define Y_DIR_READ READ(Y_DIR_PIN)
#define Y_DIR_READ() READ(Y_DIR_PIN)
#else
#define Y_DIR_INIT NOOP
#define Y_DIR_INIT() NOOP
#define Y_DIR_WRITE(STATE) L64XX_DIR_WRITE(Y, STATE)
#define Y_DIR_READ (stepper##Y.getStatus() & STATUS_DIR);
#define Y_DIR_READ() (stepper##Y.getStatus() & STATUS_DIR);
#endif
#endif
// Z Stepper
#if AXIS_IS_L64XX(Z)
extern L64XX_CLASS(Z) stepperZ;
#define Z_ENABLE_INIT NOOP
#define Z_ENABLE_INIT() NOOP
#define Z_ENABLE_WRITE(STATE) (STATE ? NOOP : stepperZ.free())
#define Z_ENABLE_READ (stepperZ.getStatus() & STATUS_HIZ)
#define Z_ENABLE_READ() (stepperZ.getStatus() & STATUS_HIZ)
#if AXIS_DRIVER_TYPE_Z(L6474)
#define Z_DIR_INIT SET_OUTPUT(Z_DIR_PIN)
#define Z_DIR_INIT() SET_OUTPUT(Z_DIR_PIN)
#define Z_DIR_WRITE(STATE) L6474_DIR_WRITE(Z, STATE)
#define Z_DIR_READ READ(Z_DIR_PIN)
#define Z_DIR_READ() READ(Z_DIR_PIN)
#else
#define Z_DIR_INIT NOOP
#define Z_DIR_INIT() NOOP
#define Z_DIR_WRITE(STATE) L64XX_DIR_WRITE(Z, STATE)
#define Z_DIR_READ (stepper##Z.getStatus() & STATUS_DIR);
#define Z_DIR_READ() (stepper##Z.getStatus() & STATUS_DIR);
#endif
#endif
// X2 Stepper
#if HAS_X2_ENABLE && AXIS_IS_L64XX(X2)
extern L64XX_CLASS(X2) stepperX2;
#define X2_ENABLE_INIT NOOP
#define X2_ENABLE_INIT() NOOP
#define X2_ENABLE_WRITE(STATE) (STATE ? NOOP : stepperX2.free())
#define X2_ENABLE_READ (stepperX2.getStatus() & STATUS_HIZ)
#define X2_ENABLE_READ() (stepperX2.getStatus() & STATUS_HIZ)
#if AXIS_DRIVER_TYPE_X2(L6474)
#define X2_DIR_INIT SET_OUTPUT(X2_DIR_PIN)
#define X2_DIR_INIT() SET_OUTPUT(X2_DIR_PIN)
#define X2_DIR_WRITE(STATE) L6474_DIR_WRITE(X2, STATE)
#define X2_DIR_READ READ(X2_DIR_PIN)
#define X2_DIR_READ() READ(X2_DIR_PIN)
#else
#define X2_DIR_INIT NOOP
#define X2_DIR_INIT() NOOP
#define X2_DIR_WRITE(STATE) L64XX_DIR_WRITE(X2, STATE)
#define X2_DIR_READ (stepper##X2.getStatus() & STATUS_DIR);
#define X2_DIR_READ() (stepper##X2.getStatus() & STATUS_DIR);
#endif
#endif
// Y2 Stepper
#if HAS_Y2_ENABLE && AXIS_IS_L64XX(Y2)
extern L64XX_CLASS(Y2) stepperY2;
#define Y2_ENABLE_INIT NOOP
#define Y2_ENABLE_INIT() NOOP
#define Y2_ENABLE_WRITE(STATE) (STATE ? NOOP : stepperY2.free())
#define Y2_ENABLE_READ (stepperY2.getStatus() & STATUS_HIZ)
#define Y2_ENABLE_READ() (stepperY2.getStatus() & STATUS_HIZ)
#if AXIS_DRIVER_TYPE_Y2(L6474)
#define Y2_DIR_INIT SET_OUTPUT(Y2_DIR_PIN)
#define Y2_DIR_INIT() SET_OUTPUT(Y2_DIR_PIN)
#define Y2_DIR_WRITE(STATE) L6474_DIR_WRITE(Y2, STATE)
#define Y2_DIR_READ READ(Y2_DIR_PIN)
#define Y2_DIR_READ() READ(Y2_DIR_PIN)
#else
#define Y2_DIR_INIT NOOP
#define Y2_DIR_INIT() NOOP
#define Y2_DIR_WRITE(STATE) L64XX_DIR_WRITE(Y2, STATE)
#define Y2_DIR_READ (stepper##Y2.getStatus() & STATUS_DIR);
#define Y2_DIR_READ() (stepper##Y2.getStatus() & STATUS_DIR);
#endif
#endif
// Z2 Stepper
#if HAS_Z2_ENABLE && AXIS_IS_L64XX(Z2)
extern L64XX_CLASS(Z2) stepperZ2;
#define Z2_ENABLE_INIT NOOP
#define Z2_ENABLE_INIT() NOOP
#define Z2_ENABLE_WRITE(STATE) (STATE ? NOOP : stepperZ2.free())
#define Z2_ENABLE_READ (stepperZ2.getStatus() & STATUS_HIZ)
#define Z2_ENABLE_READ() (stepperZ2.getStatus() & STATUS_HIZ)
#if AXIS_DRIVER_TYPE_Z2(L6474)
#define Z2_DIR_INIT SET_OUTPUT(Z2_DIR_PIN)
#define Z2_DIR_INIT() SET_OUTPUT(Z2_DIR_PIN)
#define Z2_DIR_WRITE(STATE) L6474_DIR_WRITE(Z2, STATE)
#define Z2_DIR_READ READ(Z2_DIR_PIN)
#define Z2_DIR_READ() READ(Z2_DIR_PIN)
#else
#define Z2_DIR_INIT NOOP
#define Z2_DIR_INIT() NOOP
#define Z2_DIR_WRITE(STATE) L64XX_DIR_WRITE(Z2, STATE)
#define Z2_DIR_READ (stepper##Z2.getStatus() & STATUS_DIR);
#define Z2_DIR_READ() (stepper##Z2.getStatus() & STATUS_DIR);
#endif
#endif
// Z3 Stepper
#if HAS_Z3_ENABLE && AXIS_IS_L64XX(Z3)
extern L64XX_CLASS(Z3) stepperZ3;
#define Z3_ENABLE_INIT NOOP
#define Z3_ENABLE_INIT() NOOP
#define Z3_ENABLE_WRITE(STATE) (STATE ? NOOP : stepperZ3.free())
#define Z3_ENABLE_READ (stepperZ3.getStatus() & STATUS_HIZ)
#define Z3_ENABLE_READ() (stepperZ3.getStatus() & STATUS_HIZ)
#if AXIS_DRIVER_TYPE_Z3(L6474)
#define Z3_DIR_INIT SET_OUTPUT(Z3_DIR_PIN)
#define Z3_DIR_INIT() SET_OUTPUT(Z3_DIR_PIN)
#define Z3_DIR_WRITE(STATE) L6474_DIR_WRITE(Z3, STATE)
#define Z3_DIR_READ READ(Z3_DIR_PIN)
#define Z3_DIR_READ() READ(Z3_DIR_PIN)
#else
#define Z3_DIR_INIT NOOP
#define Z3_DIR_INIT() NOOP
#define Z3_DIR_WRITE(STATE) L64XX_DIR_WRITE(Z3, STATE)
#define Z3_DIR_READ (stepper##Z3.getStatus() & STATUS_DIR);
#define Z3_DIR_READ() (stepper##Z3.getStatus() & STATUS_DIR);
#endif
#endif
// E0 Stepper
#if AXIS_IS_L64XX(E0)
extern L64XX_CLASS(E0) stepperE0;
#define E0_ENABLE_INIT NOOP
#define E0_ENABLE_INIT() NOOP
#define E0_ENABLE_WRITE(STATE) (STATE ? NOOP : stepperE0.free())
#define E0_ENABLE_READ (stepperE0.getStatus() & STATUS_HIZ)
#define E0_ENABLE_READ() (stepperE0.getStatus() & STATUS_HIZ)
#if AXIS_DRIVER_TYPE_E0(L6474)
#define E0_DIR_INIT SET_OUTPUT(E0_DIR_PIN)
#define E0_DIR_INIT() SET_OUTPUT(E0_DIR_PIN)
#define E0_DIR_WRITE(STATE) L6474_DIR_WRITE(E0, STATE)
#define E0_DIR_READ READ(E0_DIR_PIN)
#define E0_DIR_READ() READ(E0_DIR_PIN)
#else
#define E0_DIR_INIT NOOP
#define E0_DIR_INIT() NOOP
#define E0_DIR_WRITE(STATE) L64XX_DIR_WRITE(E0, STATE)
#define E0_DIR_READ (stepper##E0.getStatus() & STATUS_DIR);
#define E0_DIR_READ() (stepper##E0.getStatus() & STATUS_DIR);
#endif
#endif
// E1 Stepper
#if AXIS_IS_L64XX(E1)
extern L64XX_CLASS(E1) stepperE1;
#define E1_ENABLE_INIT NOOP
#define E1_ENABLE_INIT() NOOP
#define E1_ENABLE_WRITE(STATE) (STATE ? NOOP : stepperE1.free())
#define E1_ENABLE_READ (stepperE1.getStatus() & STATUS_HIZ)
#define E1_ENABLE_READ() (stepperE1.getStatus() & STATUS_HIZ)
#if AXIS_DRIVER_TYPE_E1(L6474)
#define E1_DIR_INIT SET_OUTPUT(E1_DIR_PIN)
#define E1_DIR_INIT() SET_OUTPUT(E1_DIR_PIN)
#define E1_DIR_WRITE(STATE) L6474_DIR_WRITE(E1, STATE)
#define E1_DIR_READ READ(E1_DIR_PIN)
#define E1_DIR_READ() READ(E1_DIR_PIN)
#else
#define E1_DIR_INIT NOOP
#define E1_DIR_INIT() NOOP
#define E1_DIR_WRITE(STATE) L64XX_DIR_WRITE(E1, STATE)
#define E1_DIR_READ (stepper##E1.getStatus() & STATUS_DIR);
#define E1_DIR_READ() (stepper##E1.getStatus() & STATUS_DIR);
#endif
#endif
// E2 Stepper
#if AXIS_IS_L64XX(E2)
extern L64XX_CLASS(E2) stepperE2;
#define E2_ENABLE_INIT NOOP
#define E2_ENABLE_INIT() NOOP
#define E2_ENABLE_WRITE(STATE) (STATE ? NOOP : stepperE2.free())
#define E2_ENABLE_READ (stepperE2.getStatus() & STATUS_HIZ)
#define E2_ENABLE_READ() (stepperE2.getStatus() & STATUS_HIZ)
#if AXIS_DRIVER_TYPE_E2(L6474)
#define E2_DIR_INIT SET_OUTPUT(E2_DIR_PIN)
#define E2_DIR_INIT() SET_OUTPUT(E2_DIR_PIN)
#define E2_DIR_WRITE(STATE) L6474_DIR_WRITE(E2, STATE)
#define E2_DIR_READ READ(E2_DIR_PIN)
#define E2_DIR_READ() READ(E2_DIR_PIN)
#else
#define E2_DIR_INIT NOOP
#define E2_DIR_INIT() NOOP
#define E2_DIR_WRITE(STATE) L64XX_DIR_WRITE(E2, STATE)
#define E2_DIR_READ (stepper##E2.getStatus() & STATUS_DIR);
#define E2_DIR_READ() (stepper##E2.getStatus() & STATUS_DIR);
#endif
#endif
// E3 Stepper
#if AXIS_IS_L64XX(E3)
extern L64XX_CLASS(E3) stepperE3;
#define E3_ENABLE_INIT NOOP
#define E3_ENABLE_INIT() NOOP
#define E3_ENABLE_WRITE(STATE) (STATE ? NOOP : stepperE3.free())
#define E3_ENABLE_READ (stepperE3.getStatus() & STATUS_HIZ)
#define E3_ENABLE_READ() (stepperE3.getStatus() & STATUS_HIZ)
#if AXIS_DRIVER_TYPE_E3(L6474)
#define E3_DIR_INIT SET_OUTPUT(E3_DIR_PIN)
#define E3_DIR_INIT() SET_OUTPUT(E3_DIR_PIN)
#define E3_DIR_WRITE(STATE) L6474_DIR_WRITE(E3, STATE)
#define E3_DIR_READ READ(E3_DIR_PIN)
#define E3_DIR_READ() READ(E3_DIR_PIN)
#else
#define E3_DIR_INIT NOOP
#define E3_DIR_INIT() NOOP
#define E3_DIR_WRITE(STATE) L64XX_DIR_WRITE(E3, STATE)
#define E3_DIR_READ (stepper##E3.getStatus() & STATUS_DIR);
#define E3_DIR_READ() (stepper##E3.getStatus() & STATUS_DIR);
#endif
#endif
// E4 Stepper
#if AXIS_IS_L64XX(E4)
extern L64XX_CLASS(E4) stepperE4;
#define E4_ENABLE_INIT NOOP
#define E4_ENABLE_INIT() NOOP
#define E4_ENABLE_WRITE(STATE) (STATE ? NOOP : stepperE4.free())
#define E4_ENABLE_READ (stepperE4.getStatus() & STATUS_HIZ)
#define E4_ENABLE_READ() (stepperE4.getStatus() & STATUS_HIZ)
#if AXIS_DRIVER_TYPE_E4(L6474)
#define E4_DIR_INIT SET_OUTPUT(E4_DIR_PIN)
#define E4_DIR_INIT() SET_OUTPUT(E4_DIR_PIN)
#define E4_DIR_WRITE(STATE) L6474_DIR_WRITE(E4, STATE)
#define E4_DIR_READ READ(E4_DIR_PIN)
#define E4_DIR_READ() READ(E4_DIR_PIN)
#else
#define E4_DIR_INIT NOOP
#define E4_DIR_INIT() NOOP
#define E4_DIR_WRITE(STATE) L64XX_DIR_WRITE(E4, STATE)
#define E4_DIR_READ (stepper##E4.getStatus() & STATUS_DIR);
#define E4_DIR_READ() (stepper##E4.getStatus() & STATUS_DIR);
#endif
#endif
// E5 Stepper
#if AXIS_IS_L64XX(E5)
extern L64XX_CLASS(E5) stepperE5;
#define E5_ENABLE_INIT NOOP
#define E5_ENABLE_INIT() NOOP
#define E5_ENABLE_WRITE(STATE) (STATE ? NOOP : stepperE5.free())
#define E5_ENABLE_READ (stepperE5.getStatus() & STATUS_HIZ)
#define E5_ENABLE_READ() (stepperE5.getStatus() & STATUS_HIZ)
#if AXIS_DRIVER_TYPE_E5(L6474)
#define E5_DIR_INIT SET_OUTPUT(E5_DIR_PIN)
#define E5_DIR_INIT() SET_OUTPUT(E5_DIR_PIN)
#define E5_DIR_WRITE(STATE) L6474_DIR_WRITE(E5, STATE)
#define E5_DIR_READ READ(E5_DIR_PIN)
#define E5_DIR_READ() READ(E5_DIR_PIN)
#else
#define E5_DIR_INIT NOOP
#define E5_DIR_INIT() NOOP
#define E5_DIR_WRITE(STATE) L64XX_DIR_WRITE(E5, STATE)
#define E5_DIR_READ (stepper##E5.getStatus() & STATUS_DIR);
#define E5_DIR_READ() (stepper##E5.getStatus() & STATUS_DIR);
#endif
#endif

28
Marlin/src/module/stepper/TMC26X.h
View File

@ -42,7 +42,7 @@ void tmc26x_init_to_defaults();
// X Stepper
#if AXIS_DRIVER_TYPE_X(TMC26X)
extern TMC26XStepper stepperX;
#define X_ENABLE_INIT NOOP
#define X_ENABLE_INIT() NOOP
#define X_ENABLE_WRITE(STATE) stepperX.setEnabled(STATE)
#define X_ENABLE_READ() stepperX.isEnabled()
#endif
@ -50,7 +50,7 @@ void tmc26x_init_to_defaults();
// Y Stepper
#if AXIS_DRIVER_TYPE_Y(TMC26X)
extern TMC26XStepper stepperY;
#define Y_ENABLE_INIT NOOP
#define Y_ENABLE_INIT() NOOP
#define Y_ENABLE_WRITE(STATE) stepperY.setEnabled(STATE)
#define Y_ENABLE_READ() stepperY.isEnabled()
#endif
@ -58,7 +58,7 @@ void tmc26x_init_to_defaults();
// Z Stepper
#if AXIS_DRIVER_TYPE_Z(TMC26X)
extern TMC26XStepper stepperZ;
#define Z_ENABLE_INIT NOOP
#define Z_ENABLE_INIT() NOOP
#define Z_ENABLE_WRITE(STATE) stepperZ.setEnabled(STATE)
#define Z_ENABLE_READ() stepperZ.isEnabled()
#endif
@ -66,7 +66,7 @@ void tmc26x_init_to_defaults();
// X2 Stepper
#if HAS_X2_ENABLE && AXIS_DRIVER_TYPE_X2(TMC26X)
extern TMC26XStepper stepperX2;
#define X2_ENABLE_INIT NOOP
#define X2_ENABLE_INIT() NOOP
#define X2_ENABLE_WRITE(STATE) stepperX2.setEnabled(STATE)
#define X2_ENABLE_READ() stepperX2.isEnabled()
#endif
@ -74,7 +74,7 @@ void tmc26x_init_to_defaults();
// Y2 Stepper
#if HAS_Y2_ENABLE && AXIS_DRIVER_TYPE_Y2(TMC26X)
extern TMC26XStepper stepperY2;
#define Y2_ENABLE_INIT NOOP
#define Y2_ENABLE_INIT() NOOP
#define Y2_ENABLE_WRITE(STATE) stepperY2.setEnabled(STATE)
#define Y2_ENABLE_READ() stepperY2.isEnabled()
#endif
@ -82,15 +82,15 @@ void tmc26x_init_to_defaults();
// Z2 Stepper
#if HAS_Z2_ENABLE && AXIS_DRIVER_TYPE_Z2(TMC26X)
extern TMC26XStepper stepperZ2;
#define Z2_ENABLE_INIT NOOP
#define Z2_ENABLE_INIT() NOOP
#define Z2_ENABLE_WRITE(STATE) stepperZ2.setEnabled(STATE)
#define Z2_ENABLE_READ() stepperZ2.isEnabled()
#endif
// Z3 Stepper
#if HAS_Z3_ENABLE && ENABLED(Z3_IS_TMC26X)
#if HAS_Z3_ENABLE && AXIS_DRIVER_TYPE_Z3(TMC26X)
extern TMC26XStepper stepperZ3;
#define Z3_ENABLE_INIT NOOP
#define Z3_ENABLE_INIT() NOOP
#define Z3_ENABLE_WRITE(STATE) stepperZ3.setEnabled(STATE)
#define Z3_ENABLE_READ() stepperZ3.isEnabled()
#endif
@ -98,7 +98,7 @@ void tmc26x_init_to_defaults();
// E0 Stepper
#if AXIS_DRIVER_TYPE_E0(TMC26X)
extern TMC26XStepper stepperE0;
#define E0_ENABLE_INIT NOOP
#define E0_ENABLE_INIT() NOOP
#define E0_ENABLE_WRITE(STATE) stepperE0.setEnabled(STATE)
#define E0_ENABLE_READ() stepperE0.isEnabled()
#endif
@ -106,7 +106,7 @@ void tmc26x_init_to_defaults();
// E1 Stepper
#if AXIS_DRIVER_TYPE_E1(TMC26X)
extern TMC26XStepper stepperE1;
#define E1_ENABLE_INIT NOOP
#define E1_ENABLE_INIT() NOOP
#define E1_ENABLE_WRITE(STATE) stepperE1.setEnabled(STATE)
#define E1_ENABLE_READ() stepperE1.isEnabled()
#endif
@ -114,7 +114,7 @@ void tmc26x_init_to_defaults();
// E2 Stepper
#if AXIS_DRIVER_TYPE_E2(TMC26X)
extern TMC26XStepper stepperE2;
#define E2_ENABLE_INIT NOOP
#define E2_ENABLE_INIT() NOOP
#define E2_ENABLE_WRITE(STATE) stepperE2.setEnabled(STATE)
#define E2_ENABLE_READ() stepperE2.isEnabled()
#endif
@ -122,7 +122,7 @@ void tmc26x_init_to_defaults();
// E3 Stepper
#if AXIS_DRIVER_TYPE_E3(TMC26X)
extern TMC26XStepper stepperE3;
#define E3_ENABLE_INIT NOOP
#define E3_ENABLE_INIT() NOOP
#define E3_ENABLE_WRITE(STATE) stepperE3.setEnabled(STATE)
#define E3_ENABLE_READ() stepperE3.isEnabled()
#endif
@ -130,7 +130,7 @@ void tmc26x_init_to_defaults();
// E4 Stepper
#if AXIS_DRIVER_TYPE_E4(TMC26X)
extern TMC26XStepper stepperE4;
#define E4_ENABLE_INIT NOOP
#define E4_ENABLE_INIT() NOOP
#define E4_ENABLE_WRITE(STATE) stepperE4.setEnabled(STATE)
#define E4_ENABLE_READ() stepperE4.isEnabled()
#endif
@ -138,7 +138,7 @@ void tmc26x_init_to_defaults();
// E5 Stepper
#if AXIS_DRIVER_TYPE_E5(TMC26X)
extern TMC26XStepper stepperE5;
#define E5_ENABLE_INIT NOOP
#define E5_ENABLE_INIT() NOOP
#define E5_ENABLE_WRITE(STATE) stepperE5.setEnabled(STATE)
#define E5_ENABLE_READ() stepperE5.isEnabled()
#endif

54
Marlin/src/module/stepper/indirection.h
View File

@ -49,12 +49,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
// X Stepper
#ifndef X_ENABLE_INIT
#define X_ENABLE_INIT SET_OUTPUT(X_ENABLE_PIN)
#define X_ENABLE_INIT() SET_OUTPUT(X_ENABLE_PIN)
#define X_ENABLE_WRITE(STATE) WRITE(X_ENABLE_PIN,STATE)
#define X_ENABLE_READ() READ(X_ENABLE_PIN)
#endif
#ifndef X_DIR_INIT
#define X_DIR_INIT SET_OUTPUT(X_DIR_PIN)
#define X_DIR_INIT() SET_OUTPUT(X_DIR_PIN)
#define X_DIR_WRITE(STATE) WRITE(X_DIR_PIN,STATE)
#define X_DIR_READ() READ(X_DIR_PIN)
#endif
@ -66,12 +66,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
// Y Stepper
#ifndef Y_ENABLE_INIT
#define Y_ENABLE_INIT SET_OUTPUT(Y_ENABLE_PIN)
#define Y_ENABLE_INIT() SET_OUTPUT(Y_ENABLE_PIN)
#define Y_ENABLE_WRITE(STATE) WRITE(Y_ENABLE_PIN,STATE)
#define Y_ENABLE_READ() READ(Y_ENABLE_PIN)
#endif
#ifndef Y_DIR_INIT
#define Y_DIR_INIT SET_OUTPUT(Y_DIR_PIN)
#define Y_DIR_INIT() SET_OUTPUT(Y_DIR_PIN)
#define Y_DIR_WRITE(STATE) WRITE(Y_DIR_PIN,STATE)
#define Y_DIR_READ() READ(Y_DIR_PIN)
#endif
@ -83,12 +83,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
// Z Stepper
#ifndef Z_ENABLE_INIT
#define Z_ENABLE_INIT SET_OUTPUT(Z_ENABLE_PIN)
#define Z_ENABLE_INIT() SET_OUTPUT(Z_ENABLE_PIN)
#define Z_ENABLE_WRITE(STATE) WRITE(Z_ENABLE_PIN,STATE)
#define Z_ENABLE_READ() READ(Z_ENABLE_PIN)
#endif
#ifndef Z_DIR_INIT
#define Z_DIR_INIT SET_OUTPUT(Z_DIR_PIN)
#define Z_DIR_INIT() SET_OUTPUT(Z_DIR_PIN)
#define Z_DIR_WRITE(STATE) WRITE(Z_DIR_PIN,STATE)
#define Z_DIR_READ() READ(Z_DIR_PIN)
#endif
@ -101,12 +101,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
// X2 Stepper
#if HAS_X2_ENABLE
#ifndef X2_ENABLE_INIT
#define X2_ENABLE_INIT SET_OUTPUT(X2_ENABLE_PIN)
#define X2_ENABLE_INIT() SET_OUTPUT(X2_ENABLE_PIN)
#define X2_ENABLE_WRITE(STATE) WRITE(X2_ENABLE_PIN,STATE)
#define X2_ENABLE_READ() READ(X2_ENABLE_PIN)
#endif
#ifndef X2_DIR_INIT
#define X2_DIR_INIT SET_OUTPUT(X2_DIR_PIN)
#define X2_DIR_INIT() SET_OUTPUT(X2_DIR_PIN)
#define X2_DIR_WRITE(STATE) WRITE(X2_DIR_PIN,STATE)
#define X2_DIR_READ() READ(X2_DIR_PIN)
#endif
@ -120,12 +120,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
// Y2 Stepper
#if HAS_Y2_ENABLE
#ifndef Y2_ENABLE_INIT
#define Y2_ENABLE_INIT SET_OUTPUT(Y2_ENABLE_PIN)
#define Y2_ENABLE_INIT() SET_OUTPUT(Y2_ENABLE_PIN)
#define Y2_ENABLE_WRITE(STATE) WRITE(Y2_ENABLE_PIN,STATE)
#define Y2_ENABLE_READ() READ(Y2_ENABLE_PIN)
#endif
#ifndef Y2_DIR_INIT
#define Y2_DIR_INIT SET_OUTPUT(Y2_DIR_PIN)
#define Y2_DIR_INIT() SET_OUTPUT(Y2_DIR_PIN)
#define Y2_DIR_WRITE(STATE) WRITE(Y2_DIR_PIN,STATE)
#define Y2_DIR_READ() READ(Y2_DIR_PIN)
#endif
@ -141,12 +141,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
// Z2 Stepper
#if HAS_Z2_ENABLE
#ifndef Z2_ENABLE_INIT
#define Z2_ENABLE_INIT SET_OUTPUT(Z2_ENABLE_PIN)
#define Z2_ENABLE_INIT() SET_OUTPUT(Z2_ENABLE_PIN)
#define Z2_ENABLE_WRITE(STATE) WRITE(Z2_ENABLE_PIN,STATE)
#define Z2_ENABLE_READ() READ(Z2_ENABLE_PIN)
#endif
#ifndef Z2_DIR_INIT
#define Z2_DIR_INIT SET_OUTPUT(Z2_DIR_PIN)
#define Z2_DIR_INIT() SET_OUTPUT(Z2_DIR_PIN)
#define Z2_DIR_WRITE(STATE) WRITE(Z2_DIR_PIN,STATE)
#define Z2_DIR_READ() READ(Z2_DIR_PIN)
#endif
@ -162,12 +162,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
// Z3 Stepper
#if HAS_Z3_ENABLE
#ifndef Z3_ENABLE_INIT
#define Z3_ENABLE_INIT SET_OUTPUT(Z3_ENABLE_PIN)
#define Z3_ENABLE_INIT() SET_OUTPUT(Z3_ENABLE_PIN)
#define Z3_ENABLE_WRITE(STATE) WRITE(Z3_ENABLE_PIN,STATE)
#define Z3_ENABLE_READ() READ(Z3_ENABLE_PIN)
#endif
#ifndef Z3_DIR_INIT
#define Z3_DIR_INIT SET_OUTPUT(Z3_DIR_PIN)
#define Z3_DIR_INIT() SET_OUTPUT(Z3_DIR_PIN)
#define Z3_DIR_WRITE(STATE) WRITE(Z3_DIR_PIN,STATE)
#define Z3_DIR_READ() READ(Z3_DIR_PIN)
#endif
@ -182,12 +182,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
// E0 Stepper
#ifndef E0_ENABLE_INIT
#define E0_ENABLE_INIT SET_OUTPUT(E0_ENABLE_PIN)
#define E0_ENABLE_INIT() SET_OUTPUT(E0_ENABLE_PIN)
#define E0_ENABLE_WRITE(STATE) WRITE(E0_ENABLE_PIN,STATE)
#define E0_ENABLE_READ() READ(E0_ENABLE_PIN)
#endif
#ifndef E0_DIR_INIT
#define E0_DIR_INIT SET_OUTPUT(E0_DIR_PIN)
#define E0_DIR_INIT() SET_OUTPUT(E0_DIR_PIN)
#define E0_DIR_WRITE(STATE) WRITE(E0_DIR_PIN,STATE)
#define E0_DIR_READ() READ(E0_DIR_PIN)
#endif
@ -199,12 +199,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
// E1 Stepper
#ifndef E1_ENABLE_INIT
#define E1_ENABLE_INIT SET_OUTPUT(E1_ENABLE_PIN)
#define E1_ENABLE_INIT() SET_OUTPUT(E1_ENABLE_PIN)
#define E1_ENABLE_WRITE(STATE) WRITE(E1_ENABLE_PIN,STATE)
#define E1_ENABLE_READ() READ(E1_ENABLE_PIN)
#endif
#ifndef E1_DIR_INIT
#define E1_DIR_INIT SET_OUTPUT(E1_DIR_PIN)
#define E1_DIR_INIT() SET_OUTPUT(E1_DIR_PIN)
#define E1_DIR_WRITE(STATE) WRITE(E1_DIR_PIN,STATE)
#define E1_DIR_READ() READ(E1_DIR_PIN)
#endif
@ -216,12 +216,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
// E2 Stepper
#ifndef E2_ENABLE_INIT
#define E2_ENABLE_INIT SET_OUTPUT(E2_ENABLE_PIN)
#define E2_ENABLE_INIT() SET_OUTPUT(E2_ENABLE_PIN)
#define E2_ENABLE_WRITE(STATE) WRITE(E2_ENABLE_PIN,STATE)
#define E2_ENABLE_READ() READ(E2_ENABLE_PIN)
#endif
#ifndef E2_DIR_INIT
#define E2_DIR_INIT SET_OUTPUT(E2_DIR_PIN)
#define E2_DIR_INIT() SET_OUTPUT(E2_DIR_PIN)
#define E2_DIR_WRITE(STATE) WRITE(E2_DIR_PIN,STATE)
#define E2_DIR_READ() READ(E2_DIR_PIN)
#endif
@ -233,12 +233,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
// E3 Stepper
#ifndef E3_ENABLE_INIT
#define E3_ENABLE_INIT SET_OUTPUT(E3_ENABLE_PIN)
#define E3_ENABLE_INIT() SET_OUTPUT(E3_ENABLE_PIN)
#define E3_ENABLE_WRITE(STATE) WRITE(E3_ENABLE_PIN,STATE)
#define E3_ENABLE_READ() READ(E3_ENABLE_PIN)
#endif
#ifndef E3_DIR_INIT
#define E3_DIR_INIT SET_OUTPUT(E3_DIR_PIN)
#define E3_DIR_INIT() SET_OUTPUT(E3_DIR_PIN)
#define E3_DIR_WRITE(STATE) WRITE(E3_DIR_PIN,STATE)
#define E3_DIR_READ() READ(E3_DIR_PIN)
#endif
@ -250,12 +250,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
// E4 Stepper
#ifndef E4_ENABLE_INIT
#define E4_ENABLE_INIT SET_OUTPUT(E4_ENABLE_PIN)
#define E4_ENABLE_INIT() SET_OUTPUT(E4_ENABLE_PIN)
#define E4_ENABLE_WRITE(STATE) WRITE(E4_ENABLE_PIN,STATE)
#define E4_ENABLE_READ() READ(E4_ENABLE_PIN)
#endif
#ifndef E4_DIR_INIT
#define E4_DIR_INIT SET_OUTPUT(E4_DIR_PIN)
#define E4_DIR_INIT() SET_OUTPUT(E4_DIR_PIN)
#define E4_DIR_WRITE(STATE) WRITE(E4_DIR_PIN,STATE)
#define E4_DIR_READ() READ(E4_DIR_PIN)
#endif
@ -267,12 +267,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
// E5 Stepper
#ifndef E5_ENABLE_INIT
#define E5_ENABLE_INIT SET_OUTPUT(E5_ENABLE_PIN)
#define E5_ENABLE_INIT() SET_OUTPUT(E5_ENABLE_PIN)
#define E5_ENABLE_WRITE(STATE) WRITE(E5_ENABLE_PIN,STATE)
#define E5_ENABLE_READ() READ(E5_ENABLE_PIN)
#endif
#ifndef E5_DIR_INIT
#define E5_DIR_INIT SET_OUTPUT(E5_DIR_PIN)
#define E5_DIR_INIT() SET_OUTPUT(E5_DIR_PIN)
#define E5_DIR_WRITE(STATE) WRITE(E5_DIR_PIN,STATE)
#define E5_DIR_READ() READ(E5_DIR_PIN)
#endif
@ -491,7 +491,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Z3_disable() NOOP
#endif
#define enable_Z() do{ Z_enable(); Z2_enable(); Z3_enable(); }while(0)
#define enable_Z() do{ Z_enable(); Z2_enable(); Z3_enable(); }while(0)
#define disable_Z() do{ Z_disable(); Z2_disable(); Z3_disable(); CBI(axis_known_position, Z_AXIS); }while(0)
//

26
Marlin/src/module/stepper/trinamic.h
View File

@ -88,7 +88,7 @@ void reset_trinamic_drivers();
#if AXIS_IS_TMC(X)
extern TMC_CLASS(X, X) stepperX;
#if ENABLED(SOFTWARE_DRIVER_ENABLE)
#define X_ENABLE_INIT NOOP
#define X_ENABLE_INIT() NOOP
#define X_ENABLE_WRITE(STATE) stepperX.toff((STATE)==X_ENABLE_ON ? chopper_timing.toff : 0)
#define X_ENABLE_READ() stepperX.isEnabled()
#endif
@ -101,7 +101,7 @@ void reset_trinamic_drivers();
#if AXIS_IS_TMC(Y)
extern TMC_CLASS(Y, Y) stepperY;
#if ENABLED(SOFTWARE_DRIVER_ENABLE)
#define Y_ENABLE_INIT NOOP
#define Y_ENABLE_INIT() NOOP
#define Y_ENABLE_WRITE(STATE) stepperY.toff((STATE)==Y_ENABLE_ON ? chopper_timing.toff : 0)
#define Y_ENABLE_READ() stepperY.isEnabled()
#endif
@ -114,7 +114,7 @@ void reset_trinamic_drivers();
#if AXIS_IS_TMC(Z)
extern TMC_CLASS(Z, Z) stepperZ;
#if ENABLED(SOFTWARE_DRIVER_ENABLE)
#define Z_ENABLE_INIT NOOP
#define Z_ENABLE_INIT() NOOP
#define Z_ENABLE_WRITE(STATE) stepperZ.toff((STATE)==Z_ENABLE_ON ? chopper_timing.toff : 0)
#define Z_ENABLE_READ() stepperZ.isEnabled()
#endif
@ -127,7 +127,7 @@ void reset_trinamic_drivers();
#if HAS_X2_ENABLE && AXIS_IS_TMC(X2)
extern TMC_CLASS(X2, X) stepperX2;
#if ENABLED(SOFTWARE_DRIVER_ENABLE)
#define X2_ENABLE_INIT NOOP
#define X2_ENABLE_INIT() NOOP
#define X2_ENABLE_WRITE(STATE) stepperX2.toff((STATE)==X_ENABLE_ON ? chopper_timing.toff : 0)
#define X2_ENABLE_READ() stepperX2.isEnabled()
#endif
@ -140,7 +140,7 @@ void reset_trinamic_drivers();
#if HAS_Y2_ENABLE && AXIS_IS_TMC(Y2)
extern TMC_CLASS(Y2, Y) stepperY2;
#if ENABLED(SOFTWARE_DRIVER_ENABLE)
#define Y2_ENABLE_INIT NOOP
#define Y2_ENABLE_INIT() NOOP
#define Y2_ENABLE_WRITE(STATE) stepperY2.toff((STATE)==Y_ENABLE_ON ? chopper_timing.toff : 0)
#define Y2_ENABLE_READ() stepperY2.isEnabled()
#endif
@ -153,7 +153,7 @@ void reset_trinamic_drivers();
#if HAS_Z2_ENABLE && AXIS_IS_TMC(Z2)
extern TMC_CLASS(Z2, Z) stepperZ2;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z2)
#define Z2_ENABLE_INIT NOOP
#define Z2_ENABLE_INIT() NOOP
#define Z2_ENABLE_WRITE(STATE) stepperZ2.toff((STATE)==Z_ENABLE_ON ? chopper_timing.toff : 0)
#define Z2_ENABLE_READ() stepperZ2.isEnabled()
#endif
@ -166,7 +166,7 @@ void reset_trinamic_drivers();
#if HAS_Z3_ENABLE && AXIS_IS_TMC(Z3)
extern TMC_CLASS(Z3, Z) stepperZ3;
#if ENABLED(SOFTWARE_DRIVER_ENABLE)
#define Z3_ENABLE_INIT NOOP
#define Z3_ENABLE_INIT() NOOP
#define Z3_ENABLE_WRITE(STATE) stepperZ3.toff((STATE)==Z_ENABLE_ON ? chopper_timing.toff : 0)
#define Z3_ENABLE_READ() stepperZ3.isEnabled()
#endif
@ -179,7 +179,7 @@ void reset_trinamic_drivers();
#if AXIS_IS_TMC(E0)
extern TMC_CLASS_E(0) stepperE0;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E0)
#define E0_ENABLE_INIT NOOP
#define E0_ENABLE_INIT() NOOP
#define E0_ENABLE_WRITE(STATE) stepperE0.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
#define E0_ENABLE_READ() stepperE0.isEnabled()
#endif
@ -192,7 +192,7 @@ void reset_trinamic_drivers();
#if AXIS_IS_TMC(E1)
extern TMC_CLASS_E(1) stepperE1;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E1)
#define E1_ENABLE_INIT NOOP
#define E1_ENABLE_INIT() NOOP
#define E1_ENABLE_WRITE(STATE) stepperE1.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
#define E1_ENABLE_READ() stepperE1.isEnabled()
#endif
@ -205,7 +205,7 @@ void reset_trinamic_drivers();
#if AXIS_IS_TMC(E2)
extern TMC_CLASS_E(2) stepperE2;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E2)
#define E2_ENABLE_INIT NOOP
#define E2_ENABLE_INIT() NOOP
#define E2_ENABLE_WRITE(STATE) stepperE2.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
#define E2_ENABLE_READ() stepperE2.isEnabled()
#endif
@ -218,7 +218,7 @@ void reset_trinamic_drivers();
#if AXIS_IS_TMC(E3)
extern TMC_CLASS_E(3) stepperE3;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E3)
#define E3_ENABLE_INIT NOOP
#define E3_ENABLE_INIT() NOOP
#define E3_ENABLE_WRITE(STATE) stepperE3.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
#define E3_ENABLE_READ() stepperE3.isEnabled()
#endif
@ -231,7 +231,7 @@ void reset_trinamic_drivers();
#if AXIS_IS_TMC(E4)
extern TMC_CLASS_E(4) stepperE4;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E4)
#define E4_ENABLE_INIT NOOP
#define E4_ENABLE_INIT() NOOP
#define E4_ENABLE_WRITE(STATE) stepperE4.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
#define E4_ENABLE_READ() stepperE4.isEnabled()
#endif
@ -244,7 +244,7 @@ void reset_trinamic_drivers();
#if AXIS_IS_TMC(E5)
extern TMC_CLASS_E(5) stepperE5;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E5)
#define E5_ENABLE_INIT NOOP
#define E5_ENABLE_INIT() NOOP
#define E5_ENABLE_WRITE(STATE) stepperE5.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
#define E5_ENABLE_READ() stepperE5.isEnabled()
#endif

Write Preview
Loading…
Cancel
Save