@ -422,6 +422,28 @@
# define E_MUX2_PIN 44 // E1_CS_PIN
# endif
//
// AUX1 : 5V GND D2 D1
// 5V GND A3 A4
# define AUX1_05_PIN 57 // (A3)
# define AUX1_06_PIN 2
# define AUX1_07_PIN 58 // (A4)
# define AUX1_08_PIN 1
//
// AUX2 : GND A9 D40 D42 A11
// VCC A5 A10 D44 A12
# define AUX2_03_PIN 59 // (A5)
# define AUX2_04_PIN 63 // (A9)
# define AUX2_05_PIN 64 // (A10)
# define AUX2_06_PIN 40
# define AUX2_07_PIN 44
# define AUX2_08_PIN 42
# define AUX2_09_PIN 66 // (A12)
# define AUX2_10_PIN 65 // (A11)
//
// AUX3 : GND D52 D50 5V
// NC D53 D51 D49
@ -507,12 +529,12 @@
# elif BOTH(IS_NEWPANEL, PANEL_ONE)
# define LCD_PINS_RS 40
# define LCD_PINS_ENABLE 42
# define LCD_PINS_D4 65
# define LCD_PINS_D5 66
# define LCD_PINS_D6 44
# define LCD_PINS_D7 64
# define LCD_PINS_RS AUX2_06_PIN
# define LCD_PINS_ENABLE AUX2_08_PIN
# define LCD_PINS_D4 AUX2_10_PIN
# define LCD_PINS_D5 AUX2_09_PIN
# define LCD_PINS_D6 AUX2_07_PIN
# define LCD_PINS_D7 AUX2_05_PIN
# elif ENABLED(TFTGLCD_PANEL_SPI)
@ -533,12 +555,12 @@
# elif ENABLED(ZONESTAR_LCD)
# error "CAUTION! ZONESTAR_LCD on RAMPS requires wiring modifications. It plugs into AUX2 but GND and 5V need to be swapped. Comment out this line to continue."
# define LCD_PINS_RS 64
# define LCD_PINS_ENABLE 44
# define LCD_PINS_D4 63
# define LCD_PINS_D5 40
# define LCD_PINS_D6 42
# define LCD_PINS_D7 65
# define LCD_PINS_RS AUX2_05_PIN
# define LCD_PINS_ENABLE AUX2_07_PIN
# define LCD_PINS_D4 AUX2_04_PIN
# define LCD_PINS_D5 AUX2_06_PIN
# define LCD_PINS_D6 AUX2_08_PIN
# define LCD_PINS_D7 AUX2_10_PIN
# else
@ -570,8 +592,8 @@
// Buttons attached to a shift register
// Not wired yet
//#define SHIFT_CLK_PIN 38
//#define SHIFT_LD_PIN 42
//#define SHIFT_OUT_PIN 40
//#define SHIFT_LD_PIN AUX2_08_PIN
//#define SHIFT_OUT_PIN AUX2_06_PIN
//#define SHIFT_EN_PIN EXP1_08_PIN
# endif
@ -612,10 +634,10 @@
# elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
# define BTN_EN1 64
# define BTN_EN2 59
# define BTN_ENC 63
# define SD_DETECT_PIN 42
# define BTN_EN1 AUX2_05_PIN
# define BTN_EN2 AUX2_03_PIN
# define BTN_ENC AUX2_04_PIN
# define SD_DETECT_PIN AUX2_08_PIN
# elif ENABLED(LCD_I2C_PANELOLU2)
@ -627,8 +649,8 @@
# elif ENABLED(LCD_I2C_VIKI)
# define BTN_EN1 40 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42 .
# define BTN_EN2 42
# define BTN_EN1 AUX2_06_PIN // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains AUX2-06 and AUX2-08 .
# define BTN_EN2 AUX2_08_PIN
# define BTN_ENC -1
# define LCD_SDSS SDSS
@ -636,17 +658,17 @@
# elif ANY(VIKI2, miniVIKI)
# define DOGLCD_CS 45
# define DOGLCD_A0 44
# define DOGLCD_CS AUX4_05_PIN
# define DOGLCD_A0 AUX2_07_PIN
# define LCD_SCREEN_ROT_180
# define BEEPER_PIN EXP2_06_PIN
# define STAT_LED_RED_PIN 32
# define STAT_LED_RED_PIN AUX4_03_PIN
# define STAT_LED_BLUE_PIN EXP1_09_PIN
# define BTN_EN1 22
# define BTN_EN2 7
# define BTN_ENC 39
# define BTN_ENC AUX4_08_PIN
# define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board
# define KILL_PIN EXP2_08_PIN
@ -723,19 +745,18 @@
# elif ENABLED(MINIPANEL)
# define BEEPER_PIN 42
// not connected to a pin
# define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
# define BEEPER_PIN AUX2_08_PIN
# define LCD_BACKLIGHT_PIN AUX2_10_PIN
# define DOGLCD_A0 44
# define DOGLCD_CS 66
# define DOGLCD_A0 AUX2_07_PIN
# define DOGLCD_CS AUX2_09_PIN
# define BTN_EN1 40
# define BTN_EN2 63
# define BTN_ENC 59
# define BTN_EN1 AUX2_06_PIN
# define BTN_EN2 AUX2_04_PIN
# define BTN_ENC AUX2_03_PIN
# define SD_DETECT_PIN EXP2_04 _PIN
# define KILL_PIN 64
# define SD_DETECT_PIN AUX3_07 _PIN
# define KILL_PIN AUX2_05_PIN
# elif ENABLED(ZONESTAR_LCD)
@ -764,11 +785,10 @@
# define BEEPER_PIN EXP2_06_PIN
// Buttons are directly attached to AUX-2
# if ENABLED(PANEL_ONE)
# define BTN_EN1 59 // AUX2 PIN 3
# define BTN_EN2 63 // AUX2 PIN 4
# define BTN_ENC EXP2_04_PIN
# if ENABLED(PANEL_ONE) // Buttons connect directly to AUX-2
# define BTN_EN1 AUX2_03_PIN
# define BTN_EN2 AUX2_04_PIN
# define BTN_ENC AUX3_07_PIN
# else
# define BTN_EN1 EXP1_10_PIN
# define BTN_EN2 EXP1_09_PIN
@ -781,17 +801,17 @@
# endif // HAS_WIRED_LCD
# if IS_RRW_KEYPAD && !HAS_ADC_BUTTONS
# define SHIFT_OUT_PIN 40
# define SHIFT_CLK_PIN 44
# define SHIFT_LD_PIN 42
# define SHIFT_OUT_PIN AUX2_06_PIN
# define SHIFT_CLK_PIN AUX2_07_PIN
# define SHIFT_LD_PIN AUX2_08_PIN
# ifndef BTN_EN1
# define BTN_EN1 64
# define BTN_EN1 AUX2_05_PIN
# endif
# ifndef BTN_EN2
# define BTN_EN2 59
# define BTN_EN2 AUX2_03_PIN
# endif
# ifndef BTN_ENC
# define BTN_ENC 63
# define BTN_ENC AUX2_04_PIN
# endif
# endif
Scott Lahteine
3 years ago
Scott Lahteine