Simplify pins_TRIGORILLA_14.h (#12162)

Marlin/src/pins/pins_TRIGORILLA_14.h

@@ -28,20 +28,44 @@
   #define BOARD_NAME "Anycubic RAMPS 1.4"
 #endif
 
-// Remap MOSFET pins to common usages
+// Labeled pins
-#if HOTENDS > 1
+#define TRIGORILLA_HEATER_BED_PIN  8
-  #define RAMPS_D9_PIN     45   // EEB, EEF
+#define TRIGORILLA_HEATER_0_PIN   10
+#define TRIGORILLA_HEATER_1_PIN   45   // Anycubic Kossel: Unused
+
+#define TRIGORILLA_FAN0_PIN        9   // Anycubic Kossel: Usually the part cooling fan
+#define TRIGORILLA_FAN1_PIN        7   // Anycubic Kossel: Unused
+#define TRIGORILLA_FAN2_PIN       44   // Anycubic Kossel: Hotend fan
+
+// Remap MOSFET pins to common usages:
+
+#define RAMPS_D10_PIN    TRIGORILLA_HEATER_0_PIN // HEATER_0_PIN is always RAMPS_D10_PIN in pins_RAMPS.h
+
+#if HOTENDS > 1   // EEF and EEB
+  #define RAMPS_D9_PIN   TRIGORILLA_HEATER_1_PIN
   #if !TEMP_SENSOR_BED
-    #define RAMPS_D8_PIN    9   // EEF
+    // EEF
+    #define RAMPS_D8_PIN TRIGORILLA_FAN0_PIN
+  #else
+    // EEB
+    #define RAMPS_D8_PIN TRIGORILLA_HEATER_BED_PIN
+    #define FAN_PIN      TRIGORILLA_FAN0_PIN    // Override pin 4 in pins_RAMPS.h
   #endif
 #elif TEMP_SENSOR_BED
-  #define FAN1_PIN          7   // EFB
+  // EFB (Anycubic Kossel default)
+  #define RAMPS_D9_PIN   TRIGORILLA_FAN0_PIN
+  #define RAMPS_D8_PIN   TRIGORILLA_HEATER_BED_PIN
 #else
-  #define FAN2_PIN         44   // EFF
+  // EFF
+  #define RAMPS_D9_PIN   TRIGORILLA_FAN1_PIN
+  #define RAMPS_D8_PIN   TRIGORILLA_FAN0_PIN
 #endif
 
-// D44 - Typical Extruder Fan on Anycubic Delta devices
+#if HOTENDS > 1 || TEMP_SENSOR_BED      // EEF, EEB, EFB
-#define ORIG_E0_AUTO_FAN_PIN 44
+  #define FAN1_PIN       TRIGORILLA_FAN1_PIN
+#endif
+#define FAN2_PIN         TRIGORILLA_FAN2_PIN
+#define ORIG_E0_AUTO_FAN_PIN TRIGORILLA_FAN2_PIN  // Used in Anycubic Kossel example config
 
 #include "pins_RAMPS.h"