andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

merged https://github.com/MarlinFirmware/Marlin.git

pull/1/head
AnHardt 10 years ago
parent
b3ca430a20 b033783e0f
commit
6e6e3cf443
4 changed files with 84 additions and 86 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 156
      Marlin/Marlin_main.cpp
  2. 2
      Marlin/boards.h
  3. 2
      Marlin/language.h
  4. 10
      Marlin/ultralcd_implementation_hitachi_HD44780.h

156
Marlin/Marlin_main.cpp
View File

@ -49,16 +49,16 @@
#include "math.h" #include "math.h"
#ifdef BLINKM #ifdef BLINKM
#include "BlinkM.h" #include "BlinkM.h"
#include "Wire.h" #include "Wire.h"
#endif #endif
#if NUM_SERVOS > 0 #if NUM_SERVOS > 0
#include "Servo.h" #include "Servo.h"
#endif #endif
#if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1 #if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
#include <SPI.h> #include <SPI.h>
#endif #endif
// look here for descriptions of G-codes: http://linuxcnc.org/handbook/gcode/g-code.html // look here for descriptions of G-codes: http://linuxcnc.org/handbook/gcode/g-code.html
@ -138,17 +138,17 @@
// M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec // M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec
// M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) in mm/sec^2 also sets minimum segment time in ms (B20000) to prevent buffer under-runs and M20 minimum feedrate // M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) in mm/sec^2 also sets minimum segment time in ms (B20000) to prevent buffer under-runs and M20 minimum feedrate
// M205 - advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk, E=maximum E jerk // M205 - advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk, E=maximum E jerk
// M206 - set additional homing offset // M206 - Set additional homing offset
// M207 - set retract length S[positive mm] F[feedrate mm/min] Z[additional zlift/hop], stays in mm regardless of M200 setting // M207 - Set retract length S[positive mm] F[feedrate mm/min] Z[additional zlift/hop], stays in mm regardless of M200 setting
// M208 - set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/sec] // M208 - Set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/sec]
// M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction. // M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction.
// M218 - set hotend offset (in mm): T<extruder_number> X<offset_on_X> Y<offset_on_Y> // M218 - Set hotend offset (in mm): T<extruder_number> X<offset_on_X> Y<offset_on_Y>
// M220 S<factor in percent>- set speed factor override percentage // M220 S<factor in percent>- set speed factor override percentage
// M221 S<factor in percent>- set extrude factor override percentage // M221 S<factor in percent>- set extrude factor override percentage
// M226 P<pin number> S<pin state>- Wait until the specified pin reaches the state required // M226 P<pin number> S<pin state>- Wait until the specified pin reaches the state required
// M240 - Trigger a camera to take a photograph // M240 - Trigger a camera to take a photograph
// M250 - Set LCD contrast C<contrast value> (value 0..63) // M250 - Set LCD contrast C<contrast value> (value 0..63)
// M280 - set servo position absolute. P: servo index, S: angle or microseconds // M280 - Set servo position absolute. P: servo index, S: angle or microseconds
// M300 - Play beep sound S<frequency Hz> P<duration ms> // M300 - Play beep sound S<frequency Hz> P<duration ms>
// M301 - Set PID parameters P I and D // M301 - Set PID parameters P I and D
// M302 - Allow cold extrudes, or set the minimum extrude S<temperature>. // M302 - Allow cold extrudes, or set the minimum extrude S<temperature>.
@ -161,14 +161,14 @@
// M405 - Turn on Filament Sensor extrusion control. Optional D<delay in cm> to set delay in centimeters between sensor and extruder // M405 - Turn on Filament Sensor extrusion control. Optional D<delay in cm> to set delay in centimeters between sensor and extruder
// M406 - Turn off Filament Sensor extrusion control // M406 - Turn off Filament Sensor extrusion control
// M407 - Displays measured filament diameter // M407 - Displays measured filament diameter
// M500 - stores parameters in EEPROM // M500 - Store parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - Read parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - Revert to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// M503 - print the current settings (from memory not from EEPROM). Use S0 to leave off headings. // M503 - Print the current settings (from memory not from EEPROM). Use S0 to leave off headings.
// M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) // M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
// M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] // M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
// M665 - set delta configurations // M665 - Set delta configurations
// M666 - set delta endstop adjustment // M666 - Set delta endstop adjustment
// M605 - Set dual x-carriage movement mode: S<mode> [ X<duplication x-offset> R<duplication temp offset> ] // M605 - Set dual x-carriage movement mode: S<mode> [ X<duplication x-offset> R<duplication temp offset> ]
// M907 - Set digital trimpot motor current using axis codes. // M907 - Set digital trimpot motor current using axis codes.
// M908 - Control digital trimpot directly. // M908 - Control digital trimpot directly.
@ -187,25 +187,16 @@
// M928 - Start SD logging (M928 filename.g) - ended by M29 // M928 - Start SD logging (M928 filename.g) - ended by M29
// M999 - Restart after being stopped by error // M999 - Restart after being stopped by error
//Stepper Movement Variables
//===========================================================================
//=============================imported variables============================
//===========================================================================
//===========================================================================
//=============================public variables=============================
//===========================================================================
#ifdef SDSUPPORT #ifdef SDSUPPORT
CardReader card; CardReader card;
#endif #endif
float homing_feedrate[] = HOMING_FEEDRATE; float homing_feedrate[] = HOMING_FEEDRATE;
bool axis_relative_modes[] = AXIS_RELATIVE_MODES; bool axis_relative_modes[] = AXIS_RELATIVE_MODES;
int feedmultiply=100; //100->1 200->2 int feedmultiply = 100; //100->1 200->2
int saved_feedmultiply; int saved_feedmultiply;
int extrudemultiply=100; //100->1 200->2 int extrudemultiply = 100; //100->1 200->2
int extruder_multiply[EXTRUDERS] = {100 int extruder_multiply[EXTRUDERS] = { 100
#if EXTRUDERS > 1 #if EXTRUDERS > 1
, 100 , 100
#if EXTRUDERS > 2 #if EXTRUDERS > 2
@ -240,14 +231,14 @@ float volumetric_multiplier[EXTRUDERS] = {1.0
#endif #endif
}; };
float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0 }; float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0 };
float add_homing[3]={0,0,0}; float add_homing[3] = { 0, 0, 0 };
#ifdef DELTA #ifdef DELTA
float endstop_adj[3]={0,0,0}; float endstop_adj[3] = { 0, 0, 0 };
#endif #endif
float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS }; float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS };
float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS }; float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS };
bool axis_known_position[3] = {false, false, false}; bool axis_known_position[3] = { false, false, false };
float zprobe_zoffset; float zprobe_zoffset;
// Extruder offset // Extruder offset
@ -258,25 +249,36 @@ float zprobe_zoffset;
#define NUM_EXTRUDER_OFFSETS 3 // supports offsets in XYZ plane #define NUM_EXTRUDER_OFFSETS 3 // supports offsets in XYZ plane
#endif #endif
float extruder_offset[NUM_EXTRUDER_OFFSETS][EXTRUDERS] = { float extruder_offset[NUM_EXTRUDER_OFFSETS][EXTRUDERS] = {
#if defined(EXTRUDER_OFFSET_X) && defined(EXTRUDER_OFFSET_Y) #if defined(EXTRUDER_OFFSET_X)
EXTRUDER_OFFSET_X, EXTRUDER_OFFSET_Y EXTRUDER_OFFSET_X
#endif #else
0
#endif
#if defined(EXTRUDER_OFFSET_Y)
EXTRUDER_OFFSET_Y
#else
0
#endif
}; };
#endif #endif
uint8_t active_extruder = 0; uint8_t active_extruder = 0;
int fanSpeed=0; int fanSpeed = 0;
#ifdef SERVO_ENDSTOPS #ifdef SERVO_ENDSTOPS
int servo_endstops[] = SERVO_ENDSTOPS; int servo_endstops[] = SERVO_ENDSTOPS;
int servo_endstop_angles[] = SERVO_ENDSTOP_ANGLES; int servo_endstop_angles[] = SERVO_ENDSTOP_ANGLES;
#endif #endif
#ifdef BARICUDA #ifdef BARICUDA
int ValvePressure=0; int ValvePressure = 0;
int EtoPPressure=0; int EtoPPressure = 0;
#endif #endif
#ifdef FWRETRACT #ifdef FWRETRACT
bool autoretract_enabled=false;
bool retracted[EXTRUDERS]={false bool autoretract_enabled = false;
bool retracted[EXTRUDERS] = { false
#if EXTRUDERS > 1 #if EXTRUDERS > 1
, false , false
#if EXTRUDERS > 2 #if EXTRUDERS > 2
@ -287,7 +289,7 @@ int EtoPPressure=0;
#endif #endif
#endif #endif
}; };
bool retracted_swap[EXTRUDERS]={false bool retracted_swap[EXTRUDERS] = { false
#if EXTRUDERS > 1 #if EXTRUDERS > 1
, false , false
#if EXTRUDERS > 2 #if EXTRUDERS > 2
@ -306,38 +308,41 @@ int EtoPPressure=0;
float retract_recover_length = RETRACT_RECOVER_LENGTH; float retract_recover_length = RETRACT_RECOVER_LENGTH;
float retract_recover_length_swap = RETRACT_RECOVER_LENGTH_SWAP; float retract_recover_length_swap = RETRACT_RECOVER_LENGTH_SWAP;
float retract_recover_feedrate = RETRACT_RECOVER_FEEDRATE; float retract_recover_feedrate = RETRACT_RECOVER_FEEDRATE;
#endif // FWRETRACT #endif // FWRETRACT
#ifdef ULTIPANEL #ifdef ULTIPANEL
#ifdef PS_DEFAULT_OFF bool powersupply =
bool powersupply = false; #ifdef PS_DEFAULT_OFF
#else false
bool powersupply = true; #else
#endif true
#endif
;
#endif #endif
#ifdef DELTA #ifdef DELTA
float delta[3] = {0.0, 0.0, 0.0}; float delta[3] = { 0, 0, 0 };
#define SIN_60 0.8660254037844386 #define SIN_60 0.8660254037844386
#define COS_60 0.5 #define COS_60 0.5
// these are the default values, can be overriden with M665 // these are the default values, can be overriden with M665
float delta_radius= DELTA_RADIUS; float delta_radius = DELTA_RADIUS;
float delta_tower1_x= -SIN_60*delta_radius; // front left tower float delta_tower1_x = -SIN_60 * delta_radius; // front left tower
float delta_tower1_y= -COS_60*delta_radius; float delta_tower1_y = -COS_60 * delta_radius;
float delta_tower2_x= SIN_60*delta_radius; // front right tower float delta_tower2_x = SIN_60 * delta_radius; // front right tower
float delta_tower2_y= -COS_60*delta_radius; float delta_tower2_y = -COS_60 * delta_radius;
float delta_tower3_x= 0.0; // back middle tower float delta_tower3_x = 0; // back middle tower
float delta_tower3_y= delta_radius; float delta_tower3_y = delta_radius;
float delta_diagonal_rod= DELTA_DIAGONAL_ROD; float delta_diagonal_rod = DELTA_DIAGONAL_ROD;
float delta_diagonal_rod_2= sq(delta_diagonal_rod); float delta_diagonal_rod_2 = sq(delta_diagonal_rod);
float delta_segments_per_second= DELTA_SEGMENTS_PER_SECOND; float delta_segments_per_second = DELTA_SEGMENTS_PER_SECOND;
#endif #endif
#ifdef SCARA // Build size scaling #ifdef SCARA
float axis_scaling[3]={1,1,1}; // Build size scaling, default to 1 float axis_scaling[3] = { 1, 1, 1 }; // Build size scaling, default to 1
#endif #endif
bool cancel_heatup = false ; bool cancel_heatup = false;
#ifdef FILAMENT_SENSOR #ifdef FILAMENT_SENSOR
//Variables for Filament Sensor input //Variables for Filament Sensor input
@ -354,17 +359,14 @@ bool cancel_heatup = false ;
const char errormagic[] PROGMEM = "Error:"; const char errormagic[] PROGMEM = "Error:";
const char echomagic[] PROGMEM = "echo:"; const char echomagic[] PROGMEM = "echo:";
//===========================================================================
//=============================Private Variables=============================
//===========================================================================
const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'}; const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'};
static float destination[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0}; static float destination[NUM_AXIS] = { 0, 0, 0, 0 };
#ifndef DELTA #ifndef DELTA
static float delta[3] = {0.0, 0.0, 0.0}; static float delta[3] = { 0, 0, 0 };
#endif #endif
static float offset[3] = {0.0, 0.0, 0.0}; static float offset[3] = { 0, 0, 0 };
static bool home_all_axis = true; static bool home_all_axis = true;
static float feedrate = 1500.0, next_feedrate, saved_feedrate; static float feedrate = 1500.0, next_feedrate, saved_feedrate;
static long gcode_N, gcode_LastN, Stopped_gcode_LastN = 0; static long gcode_N, gcode_LastN, Stopped_gcode_LastN = 0;
@ -376,29 +378,26 @@ static bool fromsd[BUFSIZE];
static int bufindr = 0; static int bufindr = 0;
static int bufindw = 0; static int bufindw = 0;
static int buflen = 0; static int buflen = 0;
//static int i = 0;
static char serial_char; static char serial_char;
static int serial_count = 0; static int serial_count = 0;
static boolean comment_mode = false; static boolean comment_mode = false;
static char *strchr_pointer; // just a pointer to find chars in the command string like X, Y, Z, E, etc static char *strchr_pointer; ///< A pointer to find chars in the command string (X, Y, Z, E, etc.)
const int sensitive_pins[] = SENSITIVE_PINS; // Sensitive pin list for M42
//static float tt = 0; const int sensitive_pins[] = SENSITIVE_PINS; ///< Sensitive pin list for M42
//static float bt = 0;
//Inactivity shutdown variables // Inactivity shutdown
static unsigned long previous_millis_cmd = 0; static unsigned long previous_millis_cmd = 0;
static unsigned long max_inactive_time = 0; static unsigned long max_inactive_time = 0;
static unsigned long stepper_inactive_time = DEFAULT_STEPPER_DEACTIVE_TIME*1000l; static unsigned long stepper_inactive_time = DEFAULT_STEPPER_DEACTIVE_TIME*1000l;
unsigned long starttime=0; unsigned long starttime = 0; ///< Print job start time
unsigned long stoptime=0; unsigned long stoptime = 0; ///< Print job stop time
static uint8_t tmp_extruder; static uint8_t tmp_extruder;
bool Stopped=false; bool Stopped = false;
#if NUM_SERVOS > 0 #if NUM_SERVOS > 0
Servo servos[NUM_SERVOS]; Servo servos[NUM_SERVOS];
@ -407,10 +406,9 @@ bool Stopped=false;
bool CooldownNoWait = true; bool CooldownNoWait = true;
bool target_direction; bool target_direction;
//Insert variables if CHDK is defined
#ifdef CHDK #ifdef CHDK
unsigned long chdkHigh = 0; unsigned long chdkHigh = 0;
boolean chdkActive = false; boolean chdkActive = false;
#endif #endif
//=========================================================================== //===========================================================================

2
Marlin/boards.h
View File

@ -48,7 +48,7 @@
#define BOARD_ELEFU_3 21 // Elefu Ra Board (v3) #define BOARD_ELEFU_3 21 // Elefu Ra Board (v3)
#define BOARD_5DPRINT 88 // 5DPrint D8 Driver Board #define BOARD_5DPRINT 88 // 5DPrint D8 Driver Board
#define BOARD_LEAPFROG 999 // Leapfrog #define BOARD_LEAPFROG 999 // Leapfrog
#define BOARD_WITBOX 41 // bq WITBOX #define BOARD_WITBOX 41 // bq WITBOX
#define BOARD_99 99 // This is in pins.h but...? #define BOARD_99 99 // This is in pins.h but...?

2
Marlin/language.h
View File

@ -164,7 +164,7 @@
// LCD Menu Messages // LCD Menu Messages
#define STR_Ae "Ae" // no charset we know now. Will be overruled when we know. #define STR_Ae "Ae" // No charset known now. Default will be overruled when we know.
#define STR_ae "ae" #define STR_ae "ae"
#define STR_Oe "Oe" #define STR_Oe "Oe"
#define STR_oe "oe" #define STR_oe "oe"

10
Marlin/ultralcd_implementation_hitachi_HD44780.h
View File

@ -1,5 +1,5 @@
#ifndef ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H #ifndef ULTRALCD_IMPLEMENTATION_HITACHI_HD44780_H
#define ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H #define ULTRALCD_IMPLEMENTATION_HITACHI_HD44780_H
/** /**
* Implementation of the LCD display routines for a Hitachi HD44780 display. These are common LCD character displays. * Implementation of the LCD display routines for a Hitachi HD44780 display. These are common LCD character displays.
@ -7,9 +7,9 @@
**/ **/
#ifndef REPRAPWORLD_KEYPAD #ifndef REPRAPWORLD_KEYPAD
extern volatile uint8_t buttons; //the last checked buttons in a bit array. extern volatile uint8_t buttons; //the last checked buttons in a bit array.
#else #else
extern volatile uint16_t buttons; //an extended version of the last checked buttons in a bit array. extern volatile uint16_t buttons; //an extended version of the last checked buttons in a bit array.
#endif #endif
//////////////////////////////////// ////////////////////////////////////
@ -903,4 +903,4 @@ static uint8_t lcd_implementation_read_slow_buttons()
} }
#endif #endif
#endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H #endif //__ULTRALCD_IMPLEMENTATION_HITACHI_HD44780_H

Write Preview
Loading…
Cancel
Save