andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Improved M900

vanilla_fb_2.0.x
Scott Lahteine 4 years ago
parent
b1a50d54e2
commit
6b5347ee39
2 changed files with 75 additions and 69 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 140
      Marlin/src/gcode/feature/advance/M900.cpp
  2. 4
      Marlin/src/module/configuration_store.cpp

140
Marlin/src/gcode/feature/advance/M900.cpp
View File

@ -29,11 +29,10 @@
#include "../../../module/stepper.h"
#if ENABLED(EXTRA_LIN_ADVANCE_K)
float saved_extruder_advance_K[EXTRUDERS];
float other_extruder_advance_K[EXTRUDERS];
uint8_t lin_adv_slot = 0;
#endif
/**
* M900: Get or Set Linear Advance K-factor
* T<tool> Which tool to address
@ -43,100 +42,107 @@
*/
void GcodeSuite::M900() {
auto echo_value_oor = [] (const char ltr, const bool ten=true) {
SERIAL_CHAR('?'); SERIAL_CHAR(ltr);
SERIAL_ECHOPGM(" value out of range");
if (ten) SERIAL_ECHOPGM(" (0-10)");
SERIAL_ECHOLNPGM(".");
}
if (!parser.seen_any()) {
#if ENABLED(EXTRA_LIN_ADVANCE_K)
#if EXTRUDERS < 2
SERIAL_ECHOLNPAIR("Advance S", int(new_slot), " K", kref, "(S", int(!new_slot), " K", lref, ")");
#else
LOOP_L_N(i, EXTRUDERS) {
const bool slot = TEST(lin_adv_slot, i);
SERIAL_ECHOLNPAIR("Advance T", int(i), " S", int(slot), " K", planner.extruder_advance_K[i],
"(S", int(!slot), " K", other_extruder_advance_K[i], ")");
SERIAL_EOL();
}
#endif
#else
SERIAL_ECHO_START();
#if EXTRUDERS < 2
SERIAL_ECHOLNPAIR("Advance K=", planner.extruder_advance_K[0]);
#else
SERIAL_ECHOPGM("Advance K");
LOOP_L_N(i, EXTRUDERS) {
SERIAL_CHAR(' ', '0' + i, ':');
SERIAL_ECHO(planner.extruder_advance_K[i]);
}
SERIAL_EOL();
#endif
#endif
return;
}
#if EXTRUDERS < 2
constexpr uint8_t tool_index = 0;
#else
const uint8_t tool_index = parser.intval('T', active_extruder);
if (tool_index >= EXTRUDERS) {
SERIAL_ECHOLNPGM("?T value out of range.");
echo_value_oor('T', false);
return;
}
#endif
float &kref = planner.extruder_advance_K[tool_index],
&lref = other_extruder_advance_K[tool_index];
const float oldK = kref, oldOther = lref;
float newK = oldK;
#if ENABLED(EXTRA_LIN_ADVANCE_K)
bool ext_slot = TEST(lin_adv_slot, tool_index);
if (parser.seenval('S')) {
const bool slot = parser.value_bool();
if (ext_slot != slot) {
ext_slot = slot;
SET_BIT_TO(lin_adv_slot, tool_index, slot);
planner.synchronize();
const float temp = planner.extruder_advance_K[tool_index];
planner.extruder_advance_K[tool_index] = saved_extruder_advance_K[tool_index];
saved_extruder_advance_K[tool_index] = temp;
}
const bool old_slot = TEST(lin_adv_slot, tool_index), // The tool's current slot (0 or 1)
new_slot = parser.boolval('S', old_slot); // The passed slot (default = current)
// If a new slot is being selected swap the current and
// saved K values. Do here so K/L will apply correctly.
if (new_slot != old_slot) { // Not the same slot?
SET_BIT_TO(lin_adv_slot, tool_index, new_slot); // Update the slot for the tool
newK = oldOther; // Get new K value from backup
lref = oldK; // Save K to backup
}
// Set the main K value. Apply if the main slot is active.
if (parser.seenval('K')) {
const float newK = parser.value_float();
if (WITHIN(newK, 0, 10)) {
if (ext_slot)
saved_extruder_advance_K[tool_index] = newK;
else {
planner.synchronize();
planner.extruder_advance_K[tool_index] = newK;
}
}
else
SERIAL_ECHOLNPGM("?K value out of range (0-10).");
if (!WITHIN(newK, 0, 10)) echo_value_oor('K');
else if (new_slot) lref = newK; // S1 Knn
else newK = newK; // S0 Knn
}
// Set the extra K value. Apply if the extra slot is active.
if (parser.seenval('L')) {
const float newL = parser.value_float();
if (WITHIN(newL, 0, 10)) {
if (!ext_slot)
saved_extruder_advance_K[tool_index] = newL;
else {
planner.synchronize();
planner.extruder_advance_K[tool_index] = newL;
}
}
else
SERIAL_ECHOLNPGM("?L value out of range (0-10).");
}
if (!parser.seen_any()) {
#if EXTRUDERS < 2
SERIAL_ECHOLNPAIR("Advance S", ext_slot, " K", planner.extruder_advance_K[0],
"(Slot ", 1 - ext_slot, " K", saved_extruder_advance_K[0], ")");
#else
LOOP_L_N(i, EXTRUDERS) {
const int slot = (int)TEST(lin_adv_slot, i);
SERIAL_ECHOLNPAIR("Advance T", int(i), " S", slot, " K", planner.extruder_advance_K[i],
"(Slot ", 1 - slot, " K", saved_extruder_advance_K[i], ")");
SERIAL_EOL();
}
#endif
if (!WITHIN(newL, 0, 10)) echo_value_oor('L');
else if (!new_slot) lref = newL; // S0 Lnn
else newK = newL; // S1 Lnn
}
#else
if (parser.seenval('K')) {
const float newK = parser.value_float();
if (WITHIN(newK, 0, 10)) {
planner.synchronize();
planner.extruder_advance_K[tool_index] = newK;
}
if (WITHIN(newK, 0, 10))
newK = newK;
else
SERIAL_ECHOLNPGM("?K value out of range (0-10).");
}
else {
SERIAL_ECHO_START();
#if EXTRUDERS < 2
SERIAL_ECHOLNPAIR("Advance K=", planner.extruder_advance_K[0]);
#else
SERIAL_ECHOPGM("Advance K");
LOOP_L_N(i, EXTRUDERS) {
SERIAL_CHAR(' '); SERIAL_ECHO(int(i));
SERIAL_CHAR('='); SERIAL_ECHO(planner.extruder_advance_K[i]);
}
SERIAL_EOL();
#endif
echo_value_oor('K');
}
#endif
if (newK != oldK) {
planner.synchronize();
kref = newK;
}
}
#endif // LIN_ADVANCE

4
Marlin/src/module/configuration_store.cpp
View File

@ -101,7 +101,7 @@
#endif
#if ENABLED(EXTRA_LIN_ADVANCE_K)
extern float saved_extruder_advance_K[EXTRUDERS];
extern float other_extruder_advance_K[EXTRUDERS];
#endif
#if EXTRUDERS > 1
@ -2717,7 +2717,7 @@ void MarlinSettings::reset() {
LOOP_L_N(i, EXTRUDERS) {
planner.extruder_advance_K[i] = LIN_ADVANCE_K;
#if ENABLED(EXTRA_LIN_ADVANCE_K)
saved_extruder_advance_K[i] = LIN_ADVANCE_K;
other_extruder_advance_K[i] = LIN_ADVANCE_K;
#endif
}
#endif

Write Preview
Loading…
Cancel
Save