diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 74e30dc94f..0d68d23bb1 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index 1adaa6398a..69c6aebf1a 100644
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index cc42dd4acd..037e79a115 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index 1a171138b3..1bbe28907d 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index d64fd29754..ccaa19a2bd 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
index 1adaa6398a..69c6aebf1a 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h
index 4d4cc4bd2b..26638d26ac 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index 6318c34ba1..1e1aca3170 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index b5bb62677d..2fdc0ee922 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index 6318c34ba1..1e1aca3170 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index b9a0e40a4e..8443ad73c0 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index 40eaf7a461..580358af4e 100755
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
index a3da782377..78d0f6f783 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
index d80c90603e..e720a4e8e1 100644
--- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
index 5ada72ad49..1cee8e4959 100644
--- a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
index 24f35fef1d..7705665b6c 100644
--- a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index 443ecfecbc..379d329141 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 6ecf9eec55..6bab0bd284 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index af304a78de..18906856e6 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
index 430f6542e0..ae287b5de8 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
index 801075f6ee..e87612d508 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 2 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2  // (µs)   DRV8825 on 32bit CPUs
 #define STEPPER_DIRECTION_DELAY 2 // (µs) Delay between dir and step
 
 // @section temperature
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index 769403174c..b914832d45 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
index e503930394..0c3157fb3a 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 1 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 1 // (µs)
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 6e1976c6d2..f1085cee4e 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index d6fbdd6c43..825c97c08f 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -784,7 +784,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 4 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 4 // (µs)
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
index 7bb39171bb..b20896babc 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index 439a138c44..048d763b74 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index 7886855949..b5295736e5 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
index f885186fae..30eacb6a83 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index 237324c4d5..d469fb554a 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index dcf965e871..23a56e1168 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index a8ad33e893..7827878f8f 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -789,7 +789,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
index 8f3c60edaf..7839386b92 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 132588080d..8731e36084 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -778,7 +778,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 019573aa60..0739e74a96 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -778,7 +778,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 019573aa60..0739e74a96 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -778,7 +778,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index a09899838d..8c812edfbc 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -778,7 +778,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index a09899838d..8c812edfbc 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -778,7 +778,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index a09899838d..8c812edfbc 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -778,7 +778,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
index a584ab9688..ac881887cc 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
@@ -783,7 +783,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index 30a7f66f2e..0a18a8dd80 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -778,7 +778,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index d030c61e43..a47c2d58e0 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index 9e75247c23..747ea64ebf 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
index eff6383801..99db494930 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -776,7 +776,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature
 
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index 637a951353..1539575709 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -777,7 +777,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2 // (µs)   DRV8825 on 32bit CPUs
 
 // @section temperature