Clean up trailing whitespace

Marlin/src/config/examples/Einstart-S/Configuration.h

@@ -561,7 +561,7 @@
 
 #define X_STOP_INVERTING true
 #define Y_STOP_INVERTING true
-#define Z_STOP_INVERTING true 
+#define Z_STOP_INVERTING true
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.

Marlin/src/config/examples/Einstart-S/readme.md

@@ -84,7 +84,7 @@ PF      Part Fan    (PWM)
 ZS      Z-Endstop   (Max)
 YS      Y-Endstop   (Min)
 XS      X-Endstop   (Min)
-PS      SPST Switch to enable DC 24v 
+PS      SPST Switch to enable DC 24v
 BT      Bed Thermistor (header not populated)
 ET      Extruder Thermistor
 PT1     PT100 Thermocouple (not populated)

Marlin/src/inc/Conditionals_post.h

@@ -453,7 +453,7 @@
   #elif HAS_DRIVER(LV8729)
     #define MINIMUM_STEPPER_DIR_DELAY 500
   #elif HAS_DRIVER(A5984)
-    #define MINIMUM_STEPPER_DIR_DELAY 400  
+    #define MINIMUM_STEPPER_DIR_DELAY 400
   #elif HAS_DRIVER(A4988)
     #define MINIMUM_STEPPER_DIR_DELAY 200
   #elif HAS_TRINAMIC || HAS_DRIVER(TMC2660) || HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC26X_STANDALONE) || HAS_DRIVER(TMC2660_STANDALONE)

Marlin/src/lcd/ultralcd_impl_DOGM.h

@@ -183,7 +183,7 @@
     U8GLIB_MINI12864_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes
 #elif ENABLED(U8GLIB_SH1106_EINSTART)
   // Connected via motherboard header
-  U8GLIB_SH1106_128X64 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, LCD_PINS_DC, LCD_PINS_RS);    
+  U8GLIB_SH1106_128X64 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, LCD_PINS_DC, LCD_PINS_RS);
 #else
   // for regular DOGM128 display with HW-SPI
     //U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0);  // HW-SPI Com: CS, A0  // 8 stripes

Marlin/src/module/printcounter.cpp

@@ -74,7 +74,7 @@ void PrintCounter::initStats() {
   data = { 0, 0, 0, 0, 0.0 };
 
   saveStats();
-  
+
   uint16_t crc = 0;
   int a = address;
   persistentStore.access_start();

Marlin/src/pins/pins_EINSTART-S.h

@@ -45,7 +45,7 @@
 // Limit Switches
 //
 #define X_STOP_PIN         44   // 2560 PIN 40
-#define Y_STOP_PIN         43   // 2560 PIN 41 
+#define Y_STOP_PIN         43   // 2560 PIN 41
 #define Z_STOP_PIN         42   // 2560 PIN 42
 
 //

frameworks/CMSIS/LPC1768/lib/Print.h

@@ -41,7 +41,7 @@ class Print {
   public:
     Print() : write_error(0) {}
     virtual ~Print() {}
-    
+
     int getWriteError() { return write_error; }
     void clearWriteError() { setWriteError(0); }