andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Updated M48 friendly for DELTA 

Partial implementation with reference to MarlinFirmware/Marlin#3011
pull/1/head
Scott Lahteine 9 years ago
parent
09ef955191
commit
68085ca855
2 changed files with 125 additions and 109 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 230
      Marlin/Marlin_main.cpp
  2. 4
      Marlin/SanityCheck.h

230
Marlin/Marlin_main.cpp
View File

@ -3642,6 +3642,7 @@ inline void gcode_M42() {
* V = Verbose level (0-4, default=1) * V = Verbose level (0-4, default=1)
* E = Engage Z probe for each reading * E = Engage Z probe for each reading
* L = Number of legs of movement before probe * L = Number of legs of movement before probe
* S = Schizoid (Or Star if you prefer)
* *
* This function assumes the bed has been homed. Specifically, that a G28 command * This function assumes the bed has been homed. Specifically, that a G28 command
* as been issued prior to invoking the M48 Z probe repeatability measurement function. * as been issued prior to invoking the M48 Z probe repeatability measurement function.
@ -3651,7 +3652,7 @@ inline void gcode_M42() {
inline void gcode_M48() { inline void gcode_M48() {
double sum = 0.0, mean = 0.0, sigma = 0.0, sample_set[50]; double sum = 0.0, mean = 0.0, sigma = 0.0, sample_set[50];
uint8_t verbose_level = 1, n_samples = 10, n_legs = 0; uint8_t verbose_level = 1, n_samples = 10, n_legs = 0, schizoid_flag = 0;
if (code_seen('V')) { if (code_seen('V')) {
verbose_level = code_value_short(); verbose_level = code_value_short();
@ -3672,50 +3673,57 @@ inline void gcode_M42() {
} }
} }
double X_current = st_get_axis_position_mm(X_AXIS), float X_current = current_position[X_AXIS],
Y_current = st_get_axis_position_mm(Y_AXIS), Y_current = current_position[Y_AXIS],
Z_current = st_get_axis_position_mm(Z_AXIS), Z_current = current_position[Z_AXIS],
E_current = st_get_axis_position_mm(E_AXIS), X_probe_location = X_current + X_PROBE_OFFSET_FROM_EXTRUDER,
X_probe_location = X_current, Y_probe_location = Y_current, Y_probe_location = Y_current + Y_PROBE_OFFSET_FROM_EXTRUDER,
Z_start_location = Z_current + Z_RAISE_BEFORE_PROBING; Z_start_location = Z_current + Z_RAISE_BEFORE_PROBING;
bool deploy_probe_for_each_reading = code_seen('E'); bool deploy_probe_for_each_reading = code_seen('E');
if (code_seen('X')) { if (code_seen('X')) {
X_probe_location = code_value() - (X_PROBE_OFFSET_FROM_EXTRUDER); X_probe_location = code_value();
if (X_probe_location < X_MIN_POS || X_probe_location > X_MAX_POS) { #if DISABLED(DELTA)
out_of_range_error(PSTR("X")); if (X_probe_location < MIN_PROBE_X || X_probe_location > MAX_PROBE_X) {
return; out_of_range_error(PSTR("X"));
} return;
}
#endif
} }
if (code_seen('Y')) { if (code_seen('Y')) {
Y_probe_location = code_value() - Y_PROBE_OFFSET_FROM_EXTRUDER; Y_probe_location = code_value();
if (Y_probe_location < Y_MIN_POS || Y_probe_location > Y_MAX_POS) { #if DISABLED(DELTA)
out_of_range_error(PSTR("Y")); if (Y_probe_location < MIN_PROBE_Y || Y_probe_location > MAX_PROBE_Y) {
out_of_range_error(PSTR("Y"));
return;
}
#endif
}
#if ENABLED(DELTA)
if (sqrt(X_probe_location * X_probe_location + Y_probe_location * Y_probe_location) > DELTA_PROBEABLE_RADIUS) {
SERIAL_PROTOCOLPGM("? (X,Y) location outside of probeable radius.\n");
return; return;
} }
} #endif
bool seen_L = code_seen('L');
if (code_seen('L')) { if (seen_L) {
n_legs = code_value_short(); n_legs = code_value_short();
if (n_legs == 1) n_legs = 2;
if (n_legs < 0 || n_legs > 15) { if (n_legs < 0 || n_legs > 15) {
SERIAL_PROTOCOLPGM("?Number of legs in movement not plausible (0-15).\n"); SERIAL_PROTOCOLPGM("?Number of legs in movement not plausible (0-15).\n");
return; return;
} }
if (n_legs == 1) n_legs = 2;
} }
// if (code_seen('S')) {
// Do all the preliminary setup work. First raise the Z probe. schizoid_flag++;
// if (!seen_L) n_legs = 7;
}
st_synchronize();
plan_bed_level_matrix.set_to_identity();
plan_buffer_line(X_current, Y_current, Z_start_location, E_current, homing_feedrate[Z_AXIS] / 60, active_extruder);
st_synchronize();
//
// Now get everything to the specified probe point So we can safely do a probe to // Now get everything to the specified probe point So we can safely do a probe to
// get us close to the bed. If the Z-Axis is far from the bed, we don't want to // get us close to the bed. If the Z-Axis is far from the bed, we don't want to
// use that as a starting point for each probe. // use that as a starting point for each probe.
@ -3723,90 +3731,112 @@ inline void gcode_M42() {
if (verbose_level > 2) if (verbose_level > 2)
SERIAL_PROTOCOLPGM("Positioning the probe...\n"); SERIAL_PROTOCOLPGM("Positioning the probe...\n");
plan_buffer_line(X_probe_location, Y_probe_location, Z_start_location, #if ENABLED(DELTA)
E_current, reset_bed_level(); // we don't do bed level correction in M48 because we want the raw data when we probe
homing_feedrate[X_AXIS] / 60, #else
active_extruder); plan_bed_level_matrix.set_to_identity(); // we don't do bed level correction in M48 because we wantthe raw data when we probe
st_synchronize(); #endif
if (Z_start_location < Z_RAISE_BEFORE_PROBING * 2.0)
do_blocking_move_to_z(Z_start_location);
current_position[X_AXIS] = X_current = st_get_axis_position_mm(X_AXIS); do_blocking_move_to_xy(X_probe_location - X_PROBE_OFFSET_FROM_EXTRUDER, Y_probe_location - Y_PROBE_OFFSET_FROM_EXTRUDER);
current_position[Y_AXIS] = Y_current = st_get_axis_position_mm(Y_AXIS);
current_position[Z_AXIS] = Z_current = st_get_axis_position_mm(Z_AXIS);
current_position[E_AXIS] = E_current = st_get_axis_position_mm(E_AXIS);
// //
// OK, do the initial probe to get us close to the bed. // OK, do the initial probe to get us close to the bed.
// Then retrace the right amount and use that in subsequent probes // Then retrace the right amount and use that in subsequent probes
// //
deploy_z_probe();
setup_for_endstop_move(); setup_for_endstop_move();
run_z_probe();
Z_current = current_position[Z_AXIS] = st_get_axis_position_mm(Z_AXIS); probe_pt(X_probe_location, Y_probe_location, Z_RAISE_BEFORE_PROBING,
Z_start_location = Z_current + Z_RAISE_BEFORE_PROBING; deploy_probe_for_each_reading ? ProbeDeployAndStow : ProbeDeploy,
verbose_level);
plan_buffer_line(X_probe_location, Y_probe_location, Z_start_location, raise_z_after_probing();
E_current,
homing_feedrate[X_AXIS] / 60,
active_extruder);
st_synchronize();
Z_current = current_position[Z_AXIS] = st_get_axis_position_mm(Z_AXIS);
if (deploy_probe_for_each_reading) stow_z_probe();
for (uint8_t n = 0; n < n_samples; n++) { for (uint8_t n = 0; n < n_samples; n++) {
// Make sure we are at the probe location randomSeed(millis());
do_blocking_move_to(X_probe_location, Y_probe_location, Z_start_location); // this also updates current_position delay(500);
if (n_legs) { if (n_legs) {
millis_t ms = millis(); float radius, angle = random(0.0, 360.0);
double radius = ms % ((X_MAX_LENGTH) / 4), // limit how far out to go int dir = (random(0, 10) > 5.0) ? -1 : 1; // clockwise or counter clockwise
theta = RADIANS(ms % 360L);
float dir = (ms & 0x0001) ? 1 : -1; // clockwise or counter clockwise
//SERIAL_ECHOPAIR("starting radius: ",radius); radius = random(
//SERIAL_ECHOPAIR(" theta: ",theta); #if ENABLED(DELTA)
//SERIAL_ECHOPAIR(" direction: ",dir); DELTA_PROBEABLE_RADIUS / 8, DELTA_PROBEABLE_RADIUS / 3
//SERIAL_EOL; #else
5, X_MAX_LENGTH / 8
#endif
);
if (verbose_level > 3) {
SERIAL_ECHOPAIR("Starting radius: ", radius);
SERIAL_ECHOPAIR(" angle: ", angle);
delay(100);
if (dir > 0)
SERIAL_ECHO(" Direction: Counter Clockwise \n");
else
SERIAL_ECHO(" Direction: Clockwise \n");
delay(100);
}
for (uint8_t l = 0; l < n_legs - 1; l++) { for (uint8_t l = 0; l < n_legs - 1; l++) {
ms = millis(); double delta_angle;
theta += RADIANS(dir * (ms % 20L)); if (schizoid_flag)
radius += (ms % 10L) - 5L; delta_angle = dir * 2.0 * 72.0; // The points of a 5 point star are 72 degrees apart. We need to
if (radius < 0.0) radius = -radius; // skip a point and go to the next one on the star.
else
X_current = X_probe_location + cos(theta) * radius; delta_angle = dir * (float) random(25, 45); // If we do this line, we are just trying to move further
X_current = constrain(X_current, X_MIN_POS, X_MAX_POS); // around the circle.
Y_current = Y_probe_location + sin(theta) * radius; angle += delta_angle;
Y_current = constrain(Y_current, Y_MIN_POS, Y_MAX_POS); while (angle > 360.0) // We probably do not need to keep the angle between 0 and 2*PI, but the
angle -= 360.0; // Arduino documentation says the trig functions should not be given values
while (angle < 0.0) // outside of this range. It looks like they behave correctly with
angle += 360.0; // numbers outside of the range, but just to be safe we clamp them.
X_current = X_probe_location - X_PROBE_OFFSET_FROM_EXTRUDER + cos(RADIANS(angle)) * radius;
Y_current = Y_probe_location - Y_PROBE_OFFSET_FROM_EXTRUDER + sin(RADIANS(angle)) * radius;
#if DISABLED(DELTA)
X_current = constrain(X_current, X_MIN_POS, X_MAX_POS);
Y_current = constrain(Y_current, Y_MIN_POS, Y_MAX_POS);
#else
// If we have gone out too far, we can do a simple fix and scale the numbers
// back in closer to the origin.
while (sqrt(X_current * X_current + Y_current * Y_current) > DELTA_PROBEABLE_RADIUS) {
X_current /= 1.25;
Y_current /= 1.25;
if (verbose_level > 3) {
SERIAL_ECHOPAIR("Pulling point towards center:", X_current);
SERIAL_ECHOPAIR(", ", Y_current);
SERIAL_EOL;
delay(50);
}
}
#endif
if (verbose_level > 3) { if (verbose_level > 3) {
SERIAL_PROTOCOL("Going to:");
SERIAL_ECHOPAIR("x: ", X_current); SERIAL_ECHOPAIR("x: ", X_current);
SERIAL_ECHOPAIR("y: ", Y_current); SERIAL_ECHOPAIR("y: ", Y_current);
SERIAL_ECHOPAIR(" z: ", current_position[Z_AXIS]);
SERIAL_EOL; SERIAL_EOL;
delay(55);
} }
do_blocking_move_to_xy(X_current, Y_current);
do_blocking_move_to(X_current, Y_current, Z_current); // this also updates current_position
} // n_legs loop } // n_legs loop
// Go back to the probe location
do_blocking_move_to(X_probe_location, Y_probe_location, Z_start_location); // this also updates current_position
} // n_legs } // n_legs
if (deploy_probe_for_each_reading) { // We don't really have to do this move, but if we don't we can see a funny shift in the Z Height
deploy_z_probe(); // Because the user might not have the Z_RAISE_BEFORE_PROBING height identical to the
delay(1000); // Z_RAISE_BETWEEN_PROBING height. This gets us back to the probe location at the same height that
// we have been running around the circle at.
do_blocking_move_to_xy(X_probe_location - X_PROBE_OFFSET_FROM_EXTRUDER, Y_probe_location - Y_PROBE_OFFSET_FROM_EXTRUDER);
if (deploy_probe_for_each_reading)
sample_set[n] = probe_pt(X_probe_location, Y_probe_location, Z_RAISE_BEFORE_PROBING, ProbeDeployAndStow, verbose_level);
else {
if (n == n_samples - 1)
sample_set[n] = probe_pt(X_probe_location, Y_probe_location, Z_RAISE_BEFORE_PROBING, ProbeStow, verbose_level); else
sample_set[n] = probe_pt(X_probe_location, Y_probe_location, Z_RAISE_BEFORE_PROBING, ProbeStay, verbose_level);
} }
setup_for_endstop_move();
run_z_probe();
sample_set[n] = current_position[Z_AXIS];
// //
// Get the current mean for the data points we have so far // Get the current mean for the data points we have so far
// //
@ -3824,13 +3854,13 @@ inline void gcode_M42() {
sum += ss * ss; sum += ss * ss;
} }
sigma = sqrt(sum / (n + 1)); sigma = sqrt(sum / (n + 1));
if (verbose_level > 1) { if (verbose_level > 1) {
SERIAL_PROTOCOL(n + 1); SERIAL_PROTOCOL(n + 1);
SERIAL_PROTOCOLPGM(" of "); SERIAL_PROTOCOLPGM(" of ");
SERIAL_PROTOCOL((int)n_samples); SERIAL_PROTOCOL((int)n_samples);
SERIAL_PROTOCOLPGM(" z: "); SERIAL_PROTOCOLPGM(" z: ");
SERIAL_PROTOCOL_F(current_position[Z_AXIS], 6); SERIAL_PROTOCOL_F(current_position[Z_AXIS], 6);
delay(50);
if (verbose_level > 2) { if (verbose_level > 2) {
SERIAL_PROTOCOLPGM(" mean: "); SERIAL_PROTOCOLPGM(" mean: ");
SERIAL_PROTOCOL_F(mean, 6); SERIAL_PROTOCOL_F(mean, 6);
@ -3838,36 +3868,26 @@ inline void gcode_M42() {
SERIAL_PROTOCOL_F(sigma, 6); SERIAL_PROTOCOL_F(sigma, 6);
} }
} }
if (verbose_level > 0) SERIAL_EOL; if (verbose_level > 0) SERIAL_EOL;
delay(50);
do_blocking_move_to_z(current_position[Z_AXIS] + Z_RAISE_BETWEEN_PROBINGS);
} // End of probe loop code
plan_buffer_line(X_probe_location, Y_probe_location, Z_start_location, current_position[E_AXIS], homing_feedrate[Z_AXIS] / 60, active_extruder); // raise_z_after_probing();
st_synchronize();
// Stow between
if (deploy_probe_for_each_reading) {
stow_z_probe();
delay(1000);
}
}
// Stow after
if (!deploy_probe_for_each_reading) {
stow_z_probe();
delay(1000);
}
clean_up_after_endstop_move();
if (verbose_level > 0) { if (verbose_level > 0) {
SERIAL_PROTOCOLPGM("Mean: "); SERIAL_PROTOCOLPGM("Mean: ");
SERIAL_PROTOCOL_F(mean, 6); SERIAL_PROTOCOL_F(mean, 6);
SERIAL_EOL; SERIAL_EOL;
delay(25);
} }
SERIAL_PROTOCOLPGM("Standard Deviation: "); SERIAL_PROTOCOLPGM("Standard Deviation: ");
SERIAL_PROTOCOL_F(sigma, 6); SERIAL_PROTOCOL_F(sigma, 6);
SERIAL_EOL; SERIAL_EOL; SERIAL_EOL; SERIAL_EOL;
delay(25);
clean_up_after_endstop_move();
} }
#endif // AUTO_BED_LEVELING_FEATURE && Z_MIN_PROBE_REPEATABILITY_TEST #endif // AUTO_BED_LEVELING_FEATURE && Z_MIN_PROBE_REPEATABILITY_TEST

4
Marlin/SanityCheck.h
View File

@ -231,10 +231,6 @@
#error You cannot use Z_PROBE_SLED with DELTA. #error You cannot use Z_PROBE_SLED with DELTA.
#endif #endif
#if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
#error Z_MIN_PROBE_REPEATABILITY_TEST is not supported with DELTA yet.
#endif
#endif #endif
#endif #endif

Write Preview
Loading…
Cancel
Save