From 68055a5959dee2a0c242dc6bb47cefd41d18c4e2 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 2 Aug 2015 13:56:49 -0700 Subject: [PATCH] Include RIGIDBOT_PANEL in Conditionals --- Marlin/Conditionals.h | 2 +- Marlin/example_configurations/RigidBot/Configuration_adv.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h index 35312aef0d..f3896d1f6c 100644 --- a/Marlin/Conditionals.h +++ b/Marlin/Conditionals.h @@ -58,7 +58,7 @@ #define REPRAP_DISCOUNT_SMART_CONTROLLER #endif - #if ENABLED(ULTIMAKERCONTROLLER) || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL) + #if ENABLED(ULTIMAKERCONTROLLER) || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL) || ENABLED(RIGIDBOT_PANEL) #define ULTIPANEL #define NEWPANEL #endif diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index fe17a1d272..e68085ba74 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -85,7 +85,7 @@ //This is for controlling a fan to cool down the stepper drivers //it will turn on when any driver is enabled //and turn off after the set amount of seconds from last driver being disabled again -#define CONTROLLERFAN_PIN 4 //Pin used for the fan to cool motherboard (-1 to disable) // RigidBot: Fans/Water Pump to cool the hotend cool side. +#define CONTROLLERFAN_PIN 4 // RigidBot: Fans/Water Pump to cool the hotend cool side. #define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run #define CONTROLLERFAN_SPEED 255 // == full speed