diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index bdda6885bd..c89bea954a 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/default/Configuration.h b/Marlin/src/config/default/Configuration.h
index bdda6885bd..c89bea954a 100644
--- a/Marlin/src/config/default/Configuration.h
+++ b/Marlin/src/config/default/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
index aeda630be2..114db85006 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
index 0659907b92..5ad26b874b 100644
--- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
+++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Anet/A2/Configuration.h b/Marlin/src/config/examples/Anet/A2/Configuration.h
index d3ac8b5020..1f393b94a6 100644
--- a/Marlin/src/config/examples/Anet/A2/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A2/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Anet/A2plus/Configuration.h b/Marlin/src/config/examples/Anet/A2plus/Configuration.h
index e15ebfef8d..7e59332809 100644
--- a/Marlin/src/config/examples/Anet/A2plus/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A2plus/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h
index f8da37def8..796b72190c 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h
index fd1e6611e6..5ec8bde4d9 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
index 9a3768a29b..2091548d1e 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
index 07522333e8..a6be2347ac 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
index ec0096d2d3..a2cf8f8632 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
index c6fad592d3..b0122008a2 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
index 6efc7f6b55..2c793ef67b 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
@@ -155,7 +155,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
index 508bfc24b7..f097fb71b6 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h
index e30a4699fc..a6fcc78c59 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration.h
@@ -148,7 +148,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 3
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
index 5f91c9efba..d045274675 100755
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
index a625b16091..91c52c6a47 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
@@ -151,7 +151,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
index e3852262ac..5ae0a89f92 100644
--- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
@@ -156,7 +156,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration.h b/Marlin/src/config/examples/Creality/CR-8/Configuration.h
index f4a237b404..e52821f98b 100644
--- a/Marlin/src/config/examples/Creality/CR-8/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-8/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
index 24ef0c7a9a..363363fbcc 100644
--- a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
index 06b75db027..791cc9f6a0 100644
--- a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
index 26ad4b1f4a..8f70e33e56 100644
--- a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Einstart-S/Configuration.h b/Marlin/src/config/examples/Einstart-S/Configuration.h
index e3682da822..369aff78b9 100644
--- a/Marlin/src/config/examples/Einstart-S/Configuration.h
+++ b/Marlin/src/config/examples/Einstart-S/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h
index db352afa1f..8da4608433 100644
--- a/Marlin/src/config/examples/Felix/Configuration.h
+++ b/Marlin/src/config/examples/Felix/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h
index 0e7519e378..9bc2752597 100644
--- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h
+++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
index ae10105b47..051e19e881 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration.h b/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration.h
index 66b9d32869..c0938ee15f 100644
--- a/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration.h
+++ b/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration.h
@@ -152,7 +152,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
index e286d6fb8b..1c6c303cd1 100644
--- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
@@ -157,7 +157,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
index a22145d9a3..236999ec82 100644
--- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index f0552eb805..f179434385 100644
--- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index f749b8d489..852e23a5b4 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 8d25911c15..1f77b030c3 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index e22ccf10aa..467bd2f024 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index 8230b01a1c..8481f050c9 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
index 3d51536971..6dc513a7ce 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
index 9648d29bc3..556b0a4faa 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
@@ -152,7 +152,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h
index 1d96ace104..82d8ad5d09 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration.h
@@ -167,7 +167,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h
index 00f2521b51..80956a4272 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h
@@ -152,7 +152,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h
index ab9aca2c2d..8b36c42e43 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
index ae60548428..09bf254b35 100644
--- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
+++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
index 66638069ea..6d1a537c80 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h
index b77d3bff9a..9c54637dca 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
index 1d543d56ee..51a5802c62 100644
--- a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
index c028d264bc..2696375b8b 100644
--- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h
index abc3f89160..8f7fa72545 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration.h
@@ -150,7 +150,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1  // Single extruder. Set to 2 for dual extruders
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h
index e5497f3538..78218eda4b 100644
--- a/Marlin/src/config/examples/SCARA/Configuration.h
+++ b/Marlin/src/config/examples/SCARA/Configuration.h
@@ -178,7 +178,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h
index 0fb733eab7..3a84cfd483 100644
--- a/Marlin/src/config/examples/STM32F10/Configuration.h
+++ b/Marlin/src/config/examples/STM32F10/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/STM32F4/Configuration.h b/Marlin/src/config/examples/STM32F4/Configuration.h
index f51c8ebb6b..283b31d0b9 100644
--- a/Marlin/src/config/examples/STM32F4/Configuration.h
+++ b/Marlin/src/config/examples/STM32F4/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h
index b3f6d2074e..3765252e5a 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h
index 5c38232390..a53e601815 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h
index 1b0942a9ca..3e00d9cd53 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h
@@ -169,7 +169,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
index 518b746173..b8c58b4038 100644
--- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration.h
index 379145d0af..1838a9649d 100644
--- a/Marlin/src/config/examples/Tronxy/X3A/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
index 1e1a94f9dd..5f19c65060 100644
--- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
index 2998390ea7..af1091f329 100644
--- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
index 00bb89fc04..5f8c05970d 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
index 726d8d6fb9..d228dc2953 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
@@ -167,7 +167,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h
index 74e9c67e55..f61a2ffcb7 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
index 2ef4632621..3873b478ab 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
index 51b600cc5a..35d11bcf64 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h	
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h	
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
index fa6c152f37..7517368483 100644
--- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
+++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
index 41d11991dd..a240fe7fcc 100644
--- a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
@@ -160,7 +160,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index a9a6295220..9652de1ef2 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
index af1a69d93e..8859a9fe1f 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index 06f81ed561..a07df3d324 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
index 0c7e6ccebe..c267c828af 100644
--- a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -152,7 +152,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h
index 0edca0564f..5a874a67a5 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
index d8cca0ae6b..8fcf286187 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
index ca1c47e570..83f3a063da 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
@@ -151,7 +151,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
index b975061712..852b6ef2ce 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
index 1f0525c69b..be15aac7fa 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -152,7 +152,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h
index 5c42380fd1..4395aa43c2 100644
--- a/Marlin/src/config/examples/makibox/Configuration.h
+++ b/Marlin/src/config/examples/makibox/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
index 82017d7f60..85b9748343 100644
--- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h
+++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
index 1e80eb1ddb..fbc854cae4 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h
index af5b0e665f..59a9d4db28 100644
--- a/Marlin/src/config/examples/wt150/Configuration.h
+++ b/Marlin/src/config/examples/wt150/Configuration.h
@@ -147,7 +147,7 @@
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5]
+// :[1, 2, 3, 4, 5, 6]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.