andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Spacing of g-codes in GCodes.md

pull/1/head
Scott Lahteine 10 years ago
parent
fe912f44dc
commit
652d59cd80
1 changed files with 15 additions and 15 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 30
      Documentation/GCodes.md

30
Documentation/GCodes.md
View File

@ -2,12 +2,12 @@
### Movement G and M Codes ### Movement G and M Codes
``` ```
G0 -> G1 G0 -> G1
G1 - Coordinated Movement X Y Z E G1 - Coordinated Movement X Y Z E
G2 - CW ARC G2 - CW ARC
G3 - CCW ARC G3 - CCW ARC
G4 - Dwell S[seconds] or P[milliseconds] G4 - Dwell S[seconds] or P[milliseconds]
G92 - Set current position to cordinates given G92 - Set current position to cordinates given
M0 - Wait for user, with optional prompt message (to press the LCD button, requires ULTRA_LCD) M0 - Wait for user, with optional prompt message (to press the LCD button, requires ULTRA_LCD)
M0 Click When Ready ; show "Click When Ready" until the button is pressed. M0 Click When Ready ; show "Click When Ready" until the button is pressed.
M1 - Same as M0 M1 - Same as M0
@ -94,8 +94,8 @@ M600 - Pause for filament change X<xpos> Y<ypos> Z<lift> E<initial retract> L<la
``` ```
### Units and Measures G and M Codes ### Units and Measures G and M Codes
``` ```
G90 - Use Absolute Coordinates G90 - Use Absolute Coordinates
G91 - Use Relative Coordinates G91 - Use Relative Coordinates
M82 - Set E codes absolute (default) M82 - Set E codes absolute (default)
M83 - Set E codes relative while in Absolute Coordinates (G90) mode M83 - Set E codes relative while in Absolute Coordinates (G90) mode
M92 - Set axis_steps_per_unit - same syntax as G92 M92 - Set axis_steps_per_unit - same syntax as G92
@ -112,19 +112,19 @@ M221 - Set extrude factor override percentage: S<factor in percent>
``` ```
### Firmware Retraction G and M Codes ### Firmware Retraction G and M Codes
``` ```
G10 - Retract filament according to settings of M207 G10 - Retract filament according to settings of M207
G11 - Retract recover filament according to settings of M208 G11 - Retract recover filament according to settings of M208
M207 - Set retract length S[positive mm] F[feedrate mm/min] Z[additional zlift/hop], stays in mm regardless of M200 setting M207 - Set retract length S[positive mm] F[feedrate mm/min] Z[additional zlift/hop], stays in mm regardless of M200 setting
M208 - Set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/s] M208 - Set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/s]
M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction
``` ```
### Z Probe G and M Codes ### Z Probe G and M Codes
``` ```
G28 - Home all Axis G28 - Home all Axis
G29 - Detailed Z-Probe, probes the bed at 3 or more points. The printer must be homed with G28 before G29. G29 - Detailed Z-Probe, probes the bed at 3 or more points. The printer must be homed with G28 before G29.
G30 - Single Z Probe, probes bed at current XY location. G30 - Single Z Probe, probes bed at current XY location.
G31 - Dock Z Probe sled (if enabled) G31 - Dock Z Probe sled (if enabled)
G32 - Undock Z Probe sled (if enabled) G32 - Undock Z Probe sled (if enabled)
M48 - Measure Z_Probe repeatability: P<points> X<xpos> Y<ypos> V<verbosity> E=engage L<legs of travel> M48 - Measure Z_Probe repeatability: P<points> X<xpos> Y<ypos> V<verbosity> E=engage L<legs of travel>
As with G29, the E flag causes the probe to stow after each probe. As with G29, the E flag causes the probe to stow after each probe.
M401 - Lower Z-probe (if present) M401 - Lower Z-probe (if present)

Write Preview
Loading…
Cancel
Save