Bring some configs up to date

Marlin/src/config/examples/Einstart-S/Configuration.h

@@ -87,7 +87,7 @@
  * by the standard Marlin logo with version number and web URL.
  *
  * We encourage you to take advantage of this new feature and we also
- * respecfully request that you retain the unmodified Marlin boot screen.
+ * respectfully request that you retain the unmodified Marlin boot screen.
  */
 
 // Enable to show the bitmap in Marlin/_Bootscreen.h on startup.
@@ -562,6 +562,32 @@
 #define Y_STOP_INVERTING true
 #define Z_STOP_INVERTING true
 
+/**
+ * Stepper Drivers
+ *
+ * These settings allow Marlin to tune stepper driver timing and enable advanced options for
+ * stepper drivers that support them. You may also override timing options in Configuration_adv.h.
+ *
+ * A4988 is assumed for unspecified drivers.
+ *
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+//#define X_DRIVER_TYPE  A4988
+//#define Y_DRIVER_TYPE  A4988
+//#define Z_DRIVER_TYPE  A4988
+//#define X2_DRIVER_TYPE A4988
+//#define Y2_DRIVER_TYPE A4988
+//#define Z2_DRIVER_TYPE A4988
+//#define E0_DRIVER_TYPE A4988
+//#define E1_DRIVER_TYPE A4988
+//#define E2_DRIVER_TYPE A4988
+//#define E3_DRIVER_TYPE A4988
+//#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
@@ -1870,7 +1896,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Einstart-S/Configuration_adv.h

@@ -1688,9 +1688,11 @@
   #define MAX7219_DIN_PIN   57
   #define MAX7219_LOAD_PIN  44
 
-  //#define MAX7219_GCODE       // Add the M7219 G-code to control the LED matrix
-  #define MAX7219_INIT_TEST     // Do a test pattern at initialization (Set to 2 for spiral)
-  #define MAX7219_ROTATE     0  // Rotate the display clockwise (in multiples of +/- 90°)
+  //#define MAX7219_GCODE          // Add the M7219 G-code to control the LED matrix
+  #define MAX7219_INIT_TEST    2   // Do a test pattern at initialization (Set to 2 for spiral)
+  #define MAX7219_NUMBER_UNITS 1   // Number of Max7219 units in chain.
+  #define MAX7219_ROTATE       0   // Rotate the display clockwise (in multiples of +/- 90°)
+                                   // connector at:  right=0   bottom=-90  top=90  left=180
 
   /**
    * Sample debug features

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -1642,9 +1642,11 @@
   #define MAX7219_DIN_PIN   57
   #define MAX7219_LOAD_PIN  44
 
-  //#define MAX7219_GCODE       // Add the M7219 G-code to control the LED matrix
-  #define MAX7219_INIT_TEST     // Do a test pattern at initialization (Set to 2 for spiral)
-  #define MAX7219_ROTATE     0  // Rotate the display clockwise (in multiples of +/- 90°)
+  //#define MAX7219_GCODE          // Add the M7219 G-code to control the LED matrix
+  #define MAX7219_INIT_TEST    2   // Do a test pattern at initialization (Set to 2 for spiral)
+  #define MAX7219_NUMBER_UNITS 1   // Number of Max7219 units in chain.
+  #define MAX7219_ROTATE       0   // Rotate the display clockwise (in multiples of +/- 90°)
+                                   // connector at:  right=0   bottom=-90  top=90  left=180
 
   /**
    * Sample debug features

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -1642,9 +1642,11 @@
   #define MAX7219_DIN_PIN   57
   #define MAX7219_LOAD_PIN  44
 
-  //#define MAX7219_GCODE       // Add the M7219 G-code to control the LED matrix
-  #define MAX7219_INIT_TEST     // Do a test pattern at initialization (Set to 2 for spiral)
-  #define MAX7219_ROTATE     0  // Rotate the display clockwise (in multiples of +/- 90°)
+  //#define MAX7219_GCODE          // Add the M7219 G-code to control the LED matrix
+  #define MAX7219_INIT_TEST    2   // Do a test pattern at initialization (Set to 2 for spiral)
+  #define MAX7219_NUMBER_UNITS 1   // Number of Max7219 units in chain.
+  #define MAX7219_ROTATE       0   // Rotate the display clockwise (in multiples of +/- 90°)
+                                   // connector at:  right=0   bottom=-90  top=90  left=180
 
   /**
    * Sample debug features

Marlin/src/config/examples/Tronxy/X3A/Configuration.h

@@ -1406,11 +1406,10 @@
  *
  * Select the language to display on the LCD. These languages are available:
  *
- *    en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr,
- *    gl, hr, it, jp-kana, nl, pl, pt, pt-br, ru, sk,
- *    tr, uk, zh_CN, zh_TW, test
+ *    en, an, bg, ca, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
+ *    jp-kana, nl, pl, pt, pt-br, ru, sk, tr, uk, zh_CN, zh_TW, test
  *
- * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp-kana':'Japanese', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', test':'TEST' }
+ * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp-kana':'Japanese', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' }
  */
 #define LCD_LANGUAGE en
 
@@ -1886,7 +1885,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -1644,9 +1644,11 @@
   #define MAX7219_DIN_PIN   57
   #define MAX7219_LOAD_PIN  44
 
-  //#define MAX7219_GCODE       // Add the M7219 G-code to control the LED matrix
-  #define MAX7219_INIT_TEST     // Do a test pattern at initialization (Set to 2 for spiral)
-  #define MAX7219_ROTATE     0  // Rotate the display clockwise (in multiples of +/- 90°)
+  //#define MAX7219_GCODE          // Add the M7219 G-code to control the LED matrix
+  #define MAX7219_INIT_TEST    2   // Do a test pattern at initialization (Set to 2 for spiral)
+  #define MAX7219_NUMBER_UNITS 1   // Number of Max7219 units in chain.
+  #define MAX7219_ROTATE       0   // Rotate the display clockwise (in multiples of +/- 90°)
+                                   // connector at:  right=0   bottom=-90  top=90  left=180
 
   /**
    * Sample debug features