andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Support for Z-Bold board (#14024)

pull/1/head
Aliaksei Kvitsinski 6 years ago
committed by Scott Lahteine
parent
18904c42f6
commit
648a91bce8
5 changed files with 296 additions and 32 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 4
      Marlin/Makefile
  2. 1
      Marlin/src/core/boards.h
  3. 2
      Marlin/src/pins/pins.h
  4. 64
      Marlin/src/pins/pins_EINSTART-S.h
  5. 257
      Marlin/src/pins/pins_Z_BOLT_X_SERIES.h

4
Marlin/Makefile
View File

@ -237,6 +237,8 @@ else ifeq ($(HARDWARE_MOTHERBOARD),31)
else ifeq ($(HARDWARE_MOTHERBOARD),441)
# TRONXY V3 1.0
else ifeq ($(HARDWARE_MOTHERBOARD),442)
# Z-Bolt X Series
else ifeq ($(HARDWARE_MOTHERBOARD),550)
#
# Other ATmega1280, ATmega2560
@ -288,6 +290,8 @@ else ifeq ($(HARDWARE_MOTHERBOARD),75)
else ifeq ($(HARDWARE_MOTHERBOARD),76)
# Geeetech GT2560 Rev B for A20(M/D)
else ifeq ($(HARDWARE_MOTHERBOARD),86)
# Einstart retrofit
else ifeq ($(HARDWARE_MOTHERBOARD),666)
#
# ATmega1281, ATmega2561

1
Marlin/src/core/boards.h
View File

@ -91,6 +91,7 @@
#define BOARD_DUPLICATOR_I3_PLUS 31 // Wanhao Duplicator i3 Plus
#define BOARD_VORON 441 // VORON Design
#define BOARD_TRONXY_V3_1_0 442 // Tronxy TRONXY-V3-1.0
#define BOARD_Z_BOLT_X_SERIES 550 // Z-Bolt X Series
//
// Other ATmega1280, ATmega2560

2
Marlin/src/pins/pins.h
View File

@ -170,6 +170,8 @@
#include "pins_VORON.h" // ATmega2560 env:megaatmega2560
#elif MB(TRONXY_V3_1_0)
#include "pins_TRONXY_V3_1_0.h" // ATmega2560 env:megaatmega2560
#elif MB(Z_BOLT_X_SERIES)
#include "pins_Z_BOLT_X_SERIES.h" // ATmega2560 env:megaatmega2560
//
// Other ATmega1280, ATmega2560

64
Marlin/src/pins/pins_EINSTART-S.h
View File

@ -42,28 +42,28 @@
//
// Limit Switches
//
#define X_STOP_PIN 44 // 2560 PIN 40
#define Y_STOP_PIN 43 // 2560 PIN 41
#define Z_STOP_PIN 42 // 2560 PIN 42
#define X_STOP_PIN 44
#define Y_STOP_PIN 43
#define Z_STOP_PIN 42
//
// Steppers
//
#define X_STEP_PIN 76 // 2560 PIN 68
#define X_DIR_PIN 75 // 2560 PIN 67
#define X_ENABLE_PIN 73 // 2560 PIN 66
#define X_STEP_PIN 76
#define X_DIR_PIN 75
#define X_ENABLE_PIN 73
#define Y_STEP_PIN 31 // 2560 PIN 59
#define Y_DIR_PIN 32 // 2560 PIN 58
#define Y_ENABLE_PIN 72 // 2560 PIN 65
#define Y_STEP_PIN 31
#define Y_DIR_PIN 32
#define Y_ENABLE_PIN 72
#define Z_STEP_PIN 34 // 2560 PIN 56
#define Z_DIR_PIN 35 // 2560 PIN 55
#define Z_ENABLE_PIN 33 // 2560 PIN 57
#define Z_STEP_PIN 34
#define Z_DIR_PIN 35
#define Z_ENABLE_PIN 33
#define E0_STEP_PIN 36 // 2560 PIN 54
#define E0_DIR_PIN 37 // 2560 PIN 53
#define E0_ENABLE_PIN 30 // 2560 PIN 60
#define E0_STEP_PIN 36
#define E0_DIR_PIN 37
#define E0_ENABLE_PIN 30
//
// Temperature Sensors
@ -74,16 +74,16 @@
//
// Heaters / Fans
//
#define HEATER_0_PIN 83 // 2560 PIN 49
#define HEATER_BED_PIN 38 // 2560 PIN 50
#define HEATER_0_PIN 83
#define HEATER_BED_PIN 38
#define FAN_PIN 82 // 2560 PIN 48
#define FAN_PIN 82
//
// Misc. Functions
//
#define SDSS 53 // 2560 PIN 19
#define LED_PIN 4 // 2560 PIN 1
#define SDSS 53
#define LED_PIN 4
//////////////////////////
// LCDs and Controllers //
@ -97,24 +97,24 @@
// u8glib constructor
// U8GLIB_SH1106_128X64 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, LCD_PINS_DC, LCD_PINS_RS);
#define LCD_PINS_DC 78 // 2560 PIN 4
#define LCD_PINS_RS 79 // 2560 PIN 8
#define LCD_PINS_DC 78
#define LCD_PINS_RS 79
// DOGM SPI LCD Support
#define DOGLCD_CS 3 // 2560 PIN 7
#define DOGLCD_MOSI 2 // 2560 PIN 6
#define DOGLCD_SCK 5 // 2560 PIN 5
#define DOGLCD_A0 2 // 2560 PIN 6
#define DOGLCD_CS 3
#define DOGLCD_MOSI 2
#define DOGLCD_SCK 5
#define DOGLCD_A0 2
//
// LCD Display input pins
//
#define BTN_UP 25 // 2560 PIN 75
#define BTN_DWN 26 // 2560 PIN 74
#define BTN_LFT 27 // 2560 PIN 73
#define BTN_RT 28 // 2560 PIN 72
#define BTN_UP 25
#define BTN_DWN 26
#define BTN_LFT 27
#define BTN_RT 28
// 'OK' button
#define BTN_ENC 29 // 2560 PIN 71
#define BTN_ENC 29
// Set Kill to right arrow, same as RIGID_PANEL
#define KILL_PIN 28 // 2560 PIN 72
#define KILL_PIN 28

257
Marlin/src/pins/pins_Z_BOLT_X_SERIES.h
View File

@ -0,0 +1,257 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Z-Bolt X Series board – based on Arduino Mega2560
*/
#if HOTENDS > 4 || E_STEPPERS > 4
#error "Z-Bolt X Series board supports up to 4 hotends / E-steppers."
#endif
#define BOARD_NAME "Z-Bolt X Series"
#if ENABLED(TARGET_LPC1768)
#error "Oops! Set MOTHERBOARD to an LPC1768-based board when building for LPC1768."
#elif defined(__STM32F1__)
#error "Oops! Set MOTHERBOARD to an STM32F1-based board when building for STM32F1."
#endif
#if DISABLED(IS_RAMPS_SMART, IS_RAMPS_DUO, IS_RAMPS4DUE, TARGET_LPC1768)
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#endif
//
// Servos
//
#ifndef SERVO0_PIN
#define SERVO0_PIN 11
#endif
#ifndef SERVO3_PIN
#define SERVO3_PIN 4
#endif
//
// Limit Switches
//
#define X_MIN_PIN 3
#ifndef X_MAX_PIN
#define X_MAX_PIN 2
#endif
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 32
#endif
//
// Steppers
//
#define X_STEP_PIN 54
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38
#ifndef X_CS_PIN
#define X_CS_PIN -1
#endif
#define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
#ifndef Y_CS_PIN
#define Y_CS_PIN -1
#endif
#define Z_STEP_PIN 46
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 62
#ifndef Z_CS_PIN
#define Z_CS_PIN -1
#endif
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 24
#ifndef E0_CS_PIN
#define E0_CS_PIN -1
#endif
#define E1_STEP_PIN 36
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30
#ifndef E1_CS_PIN
#define E1_CS_PIN -1
#endif
// Red
#define E2_STEP_PIN 42
#define E2_DIR_PIN 40
#define E2_ENABLE_PIN 65
#ifndef E2_CS_PIN
#define E2_CS_PIN -1
#endif
// Black
#define E3_STEP_PIN 44
#define E3_DIR_PIN 64
#define E3_ENABLE_PIN 66
#ifndef E3_CS_PIN
#define E3_CS_PIN -1
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN 13 // Analog Input
#define TEMP_1_PIN 15 // Analog Input
#define TEMP_2_PIN 5 // Analog Input (BLACK)
#define TEMP_3_PIN 9 // Analog Input (RED)
#define TEMP_BED_PIN 14 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 10
#define HEATER_1_PIN 7
#define HEATER_2_PIN 6
#define HEATER_3_PIN 5
#define HEATER_BED_PIN 8
#define FAN_PIN 9
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#ifndef FILWIDTH_PIN
#define FILWIDTH_PIN 5 // Analog Input on AUX2
#endif
// Оn the servos connector
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 4
#endif
#ifndef PS_ON_PIN
#define PS_ON_PIN 12
#endif
#define AUX2_PINS_FREE !( BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD) )
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
#if NUM_SERVOS <= 1 // try to use servo connector first
#define CASE_LIGHT_PIN 6 // MUST BE HARDWARE PWM
#elif AUX2_PINS_FREE
#define CASE_LIGHT_PIN 44 // MUST BE HARDWARE PWM
#endif
#endif
//
// M3/M4/M5 - Spindle/Laser Control
//
#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENA)
#if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // try to use servo connector first
#define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 5
#elif AUX2_PINS_FREE
#define SPINDLE_LASER_ENA_PIN 40 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 65
#endif
#endif
#undef AUX2_PINS_FREE
//
// TMC software SPI
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI 66
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO 44
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK 64
#endif
#endif
#if HAS_DRIVER(TMC2208)
/**
* TMC2208 stepper drivers
*
* Hardware serial communication ports.
* If undefined software serial is used according to the pins below
*/
//#define X_HARDWARE_SERIAL Serial1
//#define X2_HARDWARE_SERIAL Serial1
//#define Y_HARDWARE_SERIAL Serial1
//#define Y2_HARDWARE_SERIAL Serial1
//#define Z_HARDWARE_SERIAL Serial1
//#define Z2_HARDWARE_SERIAL Serial1
//#define E0_HARDWARE_SERIAL Serial1
//#define E1_HARDWARE_SERIAL Serial1
//#define E2_HARDWARE_SERIAL Serial1
//#define E3_HARDWARE_SERIAL Serial1
//#define E4_HARDWARE_SERIAL Serial1
//
// Software serial
//
#define X_SERIAL_TX_PIN 40
#define X_SERIAL_RX_PIN 63
#define X2_SERIAL_TX_PIN -1
#define X2_SERIAL_RX_PIN -1
#define Y_SERIAL_TX_PIN 59
#define Y_SERIAL_RX_PIN 64
#define Y2_SERIAL_TX_PIN -1
#define Y2_SERIAL_RX_PIN -1
#define Z_SERIAL_TX_PIN 42
#define Z_SERIAL_RX_PIN 65
#define Z2_SERIAL_TX_PIN -1
#define Z2_SERIAL_RX_PIN -1
#define E0_SERIAL_TX_PIN 44
#define E0_SERIAL_RX_PIN 66
#define E1_SERIAL_TX_PIN -1
#define E1_SERIAL_RX_PIN -1
#define E2_SERIAL_TX_PIN -1
#define E2_SERIAL_RX_PIN -1
#define E3_SERIAL_TX_PIN -1
#define E3_SERIAL_RX_PIN -1
#define E4_SERIAL_TX_PIN -1
#define E4_SERIAL_RX_PIN -1
#endif
Write Preview
Loading…
Cancel
Save