From 0575dd10de76338d89f9502e59f6e6044de4431b Mon Sep 17 00:00:00 2001 From: CONSULitAS Date: Wed, 4 Feb 2015 00:15:50 +0100 Subject: [PATCH 1/3] K8200: Example Configuration.h back in sync Example Configuration.h for K8200 back in sync * Configuration.h: rebased and added missing changes * Configuration.h: updated comments for K8200 --- Marlin/example_configurations/K8200/Configuration.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index 7c61944a7c..406091ea05 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -1,6 +1,6 @@ -#ifndef CONFIGURATION_H +#ifndef CONFIGURATION_H #define CONFIGURATION_H - + #include "boards.h" @@ -521,7 +521,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // default settings -#define DEFAULT_AXIS_STEPS_PER_UNIT {64.25,64.25,2560,600} // default steps per unit for Ultimaker +#define DEFAULT_AXIS_STEPS_PER_UNIT {64.25,64.25,2560,600} // default steps per unit for K8200 #define DEFAULT_MAX_FEEDRATE {500, 500, 5, 500} // (mm/sec) #define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot. @@ -575,6 +575,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of //LCD and SD support +// VM8201 (LCD Option for K8200) uses "DISPLAY_CHARSET_HD44870_JAPAN" and "ULTIMAKERCONTROLLER" + // Character based displays can have different extended charsets. #define DISPLAY_CHARSET_HD44780_JAPAN // "ääööüüß23°" //#define DISPLAY_CHARSET_HD44780_WESTERN // "ÄäÖöÜüß²³°" if you see a '~' instead of a 'arrow_right' at the right of submenuitems - this is the right one. @@ -586,9 +588,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of //#define SD_CHECK_AND_RETRY // Use CRC checks and retries on the SD communication //#define ENCODER_PULSES_PER_STEP 1 // Increase if you have a high resolution encoder //#define ENCODER_STEPS_PER_MENU_ITEM 5 // Set according to ENCODER_PULSES_PER_STEP or your liking - #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. - //#define ULTIPANEL //the UltiPanel as on Thingiverse //#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click From c421ffd52027d56e3b8db96a9c2a84055b9d1e3a Mon Sep 17 00:00:00 2001 From: CONSULitAS Date: Wed, 4 Feb 2015 00:19:18 +0100 Subject: [PATCH 2/3] K8200: Example Configuration_adv.h back in sync Example Configuration_adv.h for K8200 back in sync * Configuration_adv.h: rebased and added missing changes for 4th extruder --- .../K8200/Configuration_adv.h | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h index e54fe3b781..a7f55854cd 100644 --- a/Marlin/example_configurations/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/K8200/Configuration_adv.h @@ -75,9 +75,10 @@ // extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. // Multiple extruders can be assigned to the same pin in which case // the fan will turn on when any selected extruder is above the threshold. -#define EXTRUDER_0_AUTO_FAN_PIN -1 -#define EXTRUDER_1_AUTO_FAN_PIN -1 -#define EXTRUDER_2_AUTO_FAN_PIN -1 +#define EXTRUDER_0_AUTO_FAN_PIN -1 +#define EXTRUDER_1_AUTO_FAN_PIN -1 +#define EXTRUDER_2_AUTO_FAN_PIN -1 +#define EXTRUDER_3_AUTO_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed @@ -483,6 +484,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define THERMISTORHEATER_2 TEMP_SENSOR_2 #define HEATER_2_USES_THERMISTOR #endif +#if TEMP_SENSOR_3 > 0 + #define THERMISTORHEATER_3 TEMP_SENSOR_3 + #define HEATER_3_USES_THERMISTOR +#endif #if TEMP_SENSOR_BED > 0 #define THERMISTORBED TEMP_SENSOR_BED #define BED_USES_THERMISTOR @@ -496,6 +501,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st #if TEMP_SENSOR_2 == -1 #define HEATER_2_USES_AD595 #endif +#if TEMP_SENSOR_3 == -1 + #define HEATER_3_USES_AD595 +#endif #if TEMP_SENSOR_BED == -1 #define BED_USES_AD595 #endif @@ -514,6 +522,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st #undef HEATER_2_MINTEMP #undef HEATER_2_MAXTEMP #endif +#if TEMP_SENSOR_3 == 0 + #undef HEATER_3_MINTEMP + #undef HEATER_3_MAXTEMP +#endif #if TEMP_SENSOR_BED == 0 #undef BED_MINTEMP #undef BED_MAXTEMP From 0de5083aff962139f4b0f7fc5a792d480a42ec3f Mon Sep 17 00:00:00 2001 From: CONSULitAS Date: Wed, 4 Feb 2015 00:24:51 +0100 Subject: [PATCH 3/3] K8200: Example Configurations readme.md updated Example Configurations for K8200 readme.md updated * readme.md: added description for german umlaut support on LCD --- Marlin/example_configurations/K8200/readme.md | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/Marlin/example_configurations/K8200/readme.md b/Marlin/example_configurations/K8200/readme.md index 8b343d2420..79cb6e039e 100644 --- a/Marlin/example_configurations/K8200/readme.md +++ b/Marlin/example_configurations/K8200/readme.md @@ -1,9 +1,12 @@ # Example Configuration for Vellemann K8200 -* Configuration files for **Vellemann K8200** (with VM8201 LCD/SD-Support) +* Configuration files for **Vellemann K8200** (with VM8201 - LCD Option for K8200) * K8200 is a 3Drag clone - configuration should work with 3Drag http://reprap.org/wiki/3drag, too. Please report. * updated manually with parameters form genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the recent development branch +* VM8201 uses "DISPLAY_CHARSET_HD44870_JAPAN" and "ULTIMAKERCONTROLLER" +* german (de) translation with umlaut is supported now - thanks to @AnHardt for the great hardware based umlaut support + I (@CONSULitAS) tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for Windows (SD library added to IDE manually) - everything works well. **Source for genuine Vellemann Firmware V2 (with LCD/SD-Support):**