andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Make M600 heat up the nozzle. Reset runout on fail. (#19298) 

Co-authored-by: Scott Lahteine <github@thinkyhead.com>
vanilla_fb_2.0.x
Giuliano Zaro 4 years ago
committed by Scott Lahteine
parent
09a5014b3c
commit
5fcfecc56e
4 changed files with 56 additions and 13 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 58
      Marlin/src/feature/pause.cpp
  2. 2
      Marlin/src/feature/pause.h
  3. 7
      Marlin/src/gcode/feature/pause/M600.cpp
  4. 2
      Marlin/src/module/temperature.h

58
Marlin/src/feature/pause.cpp
View File

@ -29,6 +29,8 @@
#if ENABLED(ADVANCED_PAUSE_FEATURE)
//#define DEBUG_PAUSE_RESUME
#include "../MarlinCore.h"
#include "../gcode/gcode.h"
#include "../module/motion.h"
@ -62,6 +64,9 @@
#include "../libs/nozzle.h"
#include "pause.h"
#define DEBUG_OUT ENABLED(DEBUG_PAUSE_RESUME)
#include "../core/debug_out.h"
// private:
static xyze_pos_t resume_position;
@ -120,25 +125,32 @@ fil_change_settings_t fc_settings[EXTRUDERS];
* Returns 'true' if heating was completed, 'false' for abort
*/
static bool ensure_safe_temperature(const bool wait=true, const PauseMode mode=PAUSE_MODE_SAME) {
DEBUG_SECTION(est, "ensure_safe_temperature", true);
DEBUG_ECHOLNPAIR("... wait:", int(wait), " mode:", int(mode));
#if ENABLED(PREVENT_COLD_EXTRUSION)
if (!DEBUGGING(DRYRUN) && thermalManager.targetTooColdToExtrude(active_extruder)) {
SERIAL_ECHO_MSG(STR_ERR_HOTEND_TOO_COLD);
return false;
}
#endif
if (!DEBUGGING(DRYRUN) && thermalManager.targetTooColdToExtrude(active_extruder))
thermalManager.setTargetHotend(thermalManager.extrude_min_temp, active_extruder);
#if HAS_LCD_MENU
lcd_pause_show_message(PAUSE_MESSAGE_HEATING, mode);
#else
UNUSED(mode);
#endif
UNUSED(mode);
if (wait)
return thermalManager.wait_for_hotend(active_extruder);
while (ABS(thermalManager.degHotend(active_extruder) - thermalManager.degTargetHotend(active_extruder)) > TEMP_WINDOW)
wait_for_heatup = true; // Allow interruption by Emergency Parser M108
while (wait_for_heatup && ABS(thermalManager.degHotend(active_extruder) - thermalManager.degTargetHotend(active_extruder)) > TEMP_WINDOW)
idle();
wait_for_heatup = false;
#if ENABLED(PREVENT_COLD_EXTRUSION)
// A user can cancel wait-for-heating with M108
if (!DEBUGGING(DRYRUN) && thermalManager.targetTooColdToExtrude(active_extruder)) {
SERIAL_ECHO_MSG(STR_ERR_HOTEND_TOO_COLD);
return false;
}
#endif
return true;
}
@ -160,7 +172,10 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
const PauseMode mode/*=PAUSE_MODE_PAUSE_PRINT*/
DXC_ARGS
) {
TERN(HAS_LCD_MENU,,UNUSED(show_lcd));
DEBUG_SECTION(lf, "load_filament", true);
DEBUG_ECHOLNPAIR("... slowlen:", slow_load_length, " fastlen:", fast_load_length, " purgelen:", purge_length, " maxbeep:", int(max_beep_count), " showlcd:", int(show_lcd), " pauseforuser:", int(pause_for_user), " pausemode:", int(mode) DXC_SAY);
UNUSED(show_lcd);
if (!ensure_safe_temperature(false, mode)) {
#if HAS_LCD_MENU
@ -292,7 +307,14 @@ bool unload_filament(const float &unload_length, const bool show_lcd/*=false*/,
, const float &mix_multiplier/*=1.0*/
#endif
) {
TERN(HAS_LCD_MENU,,UNUSED(show_lcd));
DEBUG_SECTION(uf, "unload_filament", true);
DEBUG_ECHOLNPAIR("... unloadlen:", unload_length, " showlcd:", int(show_lcd), " mode:", int(mode)
#if BOTH(FILAMENT_UNLOAD_ALL_EXTRUDERS, MIXING_EXTRUDER)
, " mixmult:", mix_multiplier
#endif
);
UNUSED(show_lcd);
#if !BOTH(FILAMENT_UNLOAD_ALL_EXTRUDERS, MIXING_EXTRUDER)
constexpr float mix_multiplier = 1.0;
@ -358,7 +380,10 @@ bool unload_filament(const float &unload_length, const bool show_lcd/*=false*/,
uint8_t did_pause_print = 0;
bool pause_print(const float &retract, const xyz_pos_t &park_point, const float &unload_length/*=0*/, const bool show_lcd/*=false*/ DXC_ARGS) {
TERN(HAS_LCD_MENU,,UNUSED(show_lcd));
DEBUG_SECTION(pp, "pause_print", true);
DEBUG_ECHOLNPAIR("... retract:", retract, " park.x:", park_point.x, " y:", park_point.y, " z:", park_point.z, " unloadlen:", unload_length, " showlcd:", int(show_lcd) DXC_SAY);
UNUSED(show_lcd);
if (did_pause_print) return false; // already paused
@ -449,12 +474,18 @@ bool pause_print(const float &retract, const xyz_pos_t &park_point, const float
*/
void show_continue_prompt(const bool is_reload) {
DEBUG_SECTION(scp, "pause_print", true);
DEBUG_ECHOLNPAIR("... is_reload:", int(is_reload));
TERN_(HAS_LCD_MENU, lcd_pause_show_message(is_reload ? PAUSE_MESSAGE_INSERT : PAUSE_MESSAGE_WAITING));
SERIAL_ECHO_START();
serialprintPGM(is_reload ? PSTR(_PMSG(STR_FILAMENT_CHANGE_INSERT) "\n") : PSTR(_PMSG(STR_FILAMENT_CHANGE_WAIT) "\n"));
}
void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep_count/*=0*/ DXC_ARGS) {
DEBUG_SECTION(wfc, "wait_for_confirmation", true);
DEBUG_ECHOLNPAIR("... is_reload:", is_reload, " maxbeep:", int(max_beep_count) DXC_SAY);
bool nozzle_timed_out = false;
show_continue_prompt(is_reload);
@ -551,6 +582,9 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
* - Resume the current SD print job, if any
*/
void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_length/*=0*/, const float &purge_length/*=ADVANCED_PAUSE_PURGE_LENGTH*/, const int8_t max_beep_count/*=0*/, int16_t targetTemp/*=0*/ DXC_ARGS) {
DEBUG_SECTION(rp, "resume_print", true);
DEBUG_ECHOLNPAIR("... slowlen:", slow_load_length, " fastlen:", fast_load_length, " purgelen:", purge_length, " maxbeep:", int(max_beep_count), " targetTemp:", targetTemp DXC_SAY);
/*
SERIAL_ECHOLNPAIR(
"start of resume_print()\ndual_x_carriage_mode:", dual_x_carriage_mode,

2
Marlin/src/feature/pause.h
View File

@ -77,10 +77,12 @@ extern uint8_t did_pause_print;
#define DXC_PARAMS , const int8_t DXC_ext=-1
#define DXC_ARGS , const int8_t DXC_ext
#define DXC_PASS , DXC_ext
#define DXC_SAY , " dxc:", int(DXC_ext)
#else
#define DXC_PARAMS
#define DXC_ARGS
#define DXC_PASS
#define DXC_SAY
#endif
bool pause_print(const float &retract, const xyz_pos_t &park_point, const float &unload_length=0, const bool show_lcd=false DXC_PARAMS);

7
Marlin/src/gcode/feature/pause/M600.cpp
View File

@ -45,6 +45,10 @@
#include "../../../feature/mixing.h"
#endif
#if HAS_FILAMENT_SENSOR
#include "../../../feature/runout.h"
#endif
/**
* M600: Pause for filament change
*
@ -158,6 +162,9 @@ void GcodeSuite::M600() {
beep_count, (parser.seenval('R') ? parser.value_celsius() : 0) DXC_PASS);
#endif
}
else {
TERN_(HAS_FILAMENT_SENSOR, runout.reset());
}
#if EXTRUDERS > 1
// Restore toolhead if it was changed

2
Marlin/src/module/temperature.h
View File

@ -330,7 +330,7 @@ class Temperature {
#if ENABLED(PREVENT_COLD_EXTRUSION)
static bool allow_cold_extrude;
static int16_t extrude_min_temp;
FORCE_INLINE static bool tooCold(const int16_t temp) { return allow_cold_extrude ? false : temp < extrude_min_temp; }
FORCE_INLINE static bool tooCold(const int16_t temp) { return allow_cold_extrude ? false : temp < extrude_min_temp - (TEMP_WINDOW); }
FORCE_INLINE static bool tooColdToExtrude(const uint8_t E_NAME) {
return tooCold(degHotend(HOTEND_INDEX));
}

Write Preview
Loading…
Cancel
Save