From 5e97f37a78f1e91e37d3ede5fe225288c03d0309 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 29 Aug 2021 23:06:24 -0500 Subject: [PATCH] =?UTF-8?q?=F0=9F=8E=A8=20screws=5Ftilt=5Fadjust=5Fpos=20?= =?UTF-8?q?=3D>=20tramming=5Fpoints?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/src/feature/tramming.h | 6 +++--- Marlin/src/gcode/bedlevel/G35.cpp | 6 +++--- Marlin/src/lcd/menu/menu_tramming.cpp | 2 +- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/Marlin/src/feature/tramming.h b/Marlin/src/feature/tramming.h index eb27fe82fe..925659e29d 100644 --- a/Marlin/src/feature/tramming.h +++ b/Marlin/src/feature/tramming.h @@ -28,12 +28,12 @@ #error "TRAMMING_SCREW_THREAD must be equal to 30, 31, 40, 41, 50, or 51." #endif -constexpr xy_pos_t screws_tilt_adjust_pos[] = TRAMMING_POINT_XY; +constexpr xy_pos_t tramming_points[] = TRAMMING_POINT_XY; -#define G35_PROBE_COUNT COUNT(screws_tilt_adjust_pos) +#define G35_PROBE_COUNT COUNT(tramming_points) static_assert(WITHIN(G35_PROBE_COUNT, 3, 6), "TRAMMING_POINT_XY requires between 3 and 6 XY positions."); -#define VALIDATE_TRAMMING_POINT(N) static_assert(N >= G35_PROBE_COUNT || Probe::build_time::can_reach(screws_tilt_adjust_pos[N]), \ +#define VALIDATE_TRAMMING_POINT(N) static_assert(N >= G35_PROBE_COUNT || Probe::build_time::can_reach(tramming_points[N]), \ "TRAMMING_POINT_XY point " STRINGIFY(N) " is not reachable with the default NOZZLE_TO_PROBE offset and PROBING_MARGIN.") VALIDATE_TRAMMING_POINT(0); VALIDATE_TRAMMING_POINT(1); VALIDATE_TRAMMING_POINT(2); VALIDATE_TRAMMING_POINT(3); VALIDATE_TRAMMING_POINT(4); VALIDATE_TRAMMING_POINT(5); diff --git a/Marlin/src/gcode/bedlevel/G35.cpp b/Marlin/src/gcode/bedlevel/G35.cpp index 3d75a76915..3a4e1bdd5a 100644 --- a/Marlin/src/gcode/bedlevel/G35.cpp +++ b/Marlin/src/gcode/bedlevel/G35.cpp @@ -103,13 +103,13 @@ void GcodeSuite::G35() { // Users of G35 might have a badly misaligned bed, so raise Z by the // length of the deployed pin (BLTOUCH stroke < 7mm) do_blocking_move_to_z(SUM_TERN(BLTOUCH_HS_MODE, Z_CLEARANCE_BETWEEN_PROBES, 7)); - const float z_probed_height = probe.probe_at_point(screws_tilt_adjust_pos[i], PROBE_PT_RAISE, 0, true); + const float z_probed_height = probe.probe_at_point(tramming_points[i], PROBE_PT_RAISE, 0, true); if (isnan(z_probed_height)) { SERIAL_ECHOPAIR("G35 failed at point ", i + 1, " ("); SERIAL_ECHOPGM_P((char *)pgm_read_ptr(&tramming_point_name[i])); SERIAL_CHAR(')'); - SERIAL_ECHOLNPAIR_P(SP_X_STR, screws_tilt_adjust_pos[i].x, SP_Y_STR, screws_tilt_adjust_pos[i].y); + SERIAL_ECHOLNPAIR_P(SP_X_STR, tramming_points[i].x, SP_Y_STR, tramming_points[i].y); err_break = true; break; } @@ -118,7 +118,7 @@ void GcodeSuite::G35() { DEBUG_ECHOPAIR("Probing point ", i + 1, " ("); DEBUG_ECHOPGM_P((char *)pgm_read_ptr(&tramming_point_name[i])); DEBUG_CHAR(')'); - DEBUG_ECHOLNPAIR_P(SP_X_STR, screws_tilt_adjust_pos[i].x, SP_Y_STR, screws_tilt_adjust_pos[i].y, SP_Z_STR, z_probed_height); + DEBUG_ECHOLNPAIR_P(SP_X_STR, tramming_points[i].x, SP_Y_STR, tramming_points[i].y, SP_Z_STR, z_probed_height); } z_measured[i] = z_probed_height; diff --git a/Marlin/src/lcd/menu/menu_tramming.cpp b/Marlin/src/lcd/menu/menu_tramming.cpp index b5868f4056..d230ca6397 100644 --- a/Marlin/src/lcd/menu/menu_tramming.cpp +++ b/Marlin/src/lcd/menu/menu_tramming.cpp @@ -49,7 +49,7 @@ static uint8_t tram_index = 0; static bool probe_single_point() { do_blocking_move_to_z(TERN(BLTOUCH, Z_CLEARANCE_DEPLOY_PROBE, Z_CLEARANCE_BETWEEN_PROBES)); // Stow after each point with BLTouch "HIGH SPEED" mode for push-pin safety - const float z_probed_height = probe.probe_at_point(screws_tilt_adjust_pos[tram_index], TERN(BLTOUCH_HS_MODE, PROBE_PT_STOW, PROBE_PT_RAISE), 0, true); + const float z_probed_height = probe.probe_at_point(tramming_points[tram_index], TERN(BLTOUCH_HS_MODE, PROBE_PT_STOW, PROBE_PT_RAISE), 0, true); DEBUG_ECHOLNPAIR("probe_single_point: ", z_probed_height, "mm"); z_measured[tram_index] = z_probed_height; move_to_tramming_wait_pos();