diff --git a/Marlin/MarlinConfig.h b/Marlin/MarlinConfig.h index 5ead4a11b5..b0d10a301f 100644 --- a/Marlin/MarlinConfig.h +++ b/Marlin/MarlinConfig.h @@ -35,5 +35,6 @@ #endif #include "Arduino.h" #include "Conditionals_post.h" +#include "SanityCheck.h" #endif // MARLIN_CONFIG_H diff --git a/Marlin/SanityCheck.cpp b/Marlin/SanityCheck.cpp deleted file mode 100644 index f3ef238b75..0000000000 --- a/Marlin/SanityCheck.cpp +++ /dev/null @@ -1,735 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ - -/** - * SanityCheck.cpp - * - * Test configuration values for errors at compile-time. - * This is done only once, here, to speed up compilation time. - */ -#include "MarlinConfig.h" - -/** - * Due to the high number of issues related with old versions of Arduino IDE - * we are now warning our users to update their toolkits. In a future Marlin - * release we will stop supporting old IDE versions and will require user - * action to proceed with compilation in such environments. - */ -#if !defined(ARDUINO) || ARDUINO < 10600 - #error "Versions of Arduino IDE prior to 1.6.0 are no longer supported, please update your toolkit." -#endif - -/** - * We try our best to include sanity checks for all the changes configuration - * directives because people have a tendency to use outdated config files with - * the bleding edge source code, but sometimes this is not enough. This check - * will force a minimum config file revision, otherwise Marlin will not build. - */ -#if ! defined(CONFIGURATION_H_VERSION) || CONFIGURATION_H_VERSION < REQUIRED_CONFIGURATION_H_VERSION - #error "You are using an old Configuration.h file, update it before building Marlin." -#endif - -#if ! defined(CONFIGURATION_ADV_H_VERSION) || CONFIGURATION_ADV_H_VERSION < REQUIRED_CONFIGURATION_ADV_H_VERSION - #error "You are using an old Configuration_adv.h file, update it before building Marlin." -#endif - -/** - * Marlin release, version and default string - */ -#ifndef SHORT_BUILD_VERSION - #error "SHORT_BUILD_VERSION must be specified." -#elif !defined(DETAILED_BUILD_VERSION) - #error "BUILD_VERSION must be specified." -#elif !defined(STRING_DISTRIBUTION_DATE) - #error "STRING_DISTRIBUTION_DATE must be specified." -#elif !defined(PROTOCOL_VERSION) - #error "PROTOCOL_VERSION must be specified." -#elif !defined(MACHINE_NAME) - #error "MACHINE_NAME must be specified." -#elif !defined(SOURCE_CODE_URL) - #error "SOURCE_CODE_URL must be specified." -#elif !defined(DEFAULT_MACHINE_UUID) - #error "DEFAULT_MACHINE_UUID must be specified." -#elif !defined(WEBSITE_URL) - #error "WEBSITE_URL must be specified." -#endif - -/** - * Dual Stepper Drivers - */ -#if ENABLED(X_DUAL_STEPPER_DRIVERS) && ENABLED(DUAL_X_CARRIAGE) - #error "DUAL_X_CARRIAGE is not compatible with X_DUAL_STEPPER_DRIVERS." -#elif ENABLED(X_DUAL_STEPPER_DRIVERS) && (!HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR) - #error "X_DUAL_STEPPER_DRIVERS requires X2 pins (and an extra E plug)." -#elif ENABLED(Y_DUAL_STEPPER_DRIVERS) && (!HAS_Y2_ENABLE || !HAS_Y2_STEP || !HAS_Y2_DIR) - #error "Y_DUAL_STEPPER_DRIVERS requires Y2 pins (and an extra E plug)." -#elif ENABLED(Z_DUAL_STEPPER_DRIVERS) && (!HAS_Z2_ENABLE || !HAS_Z2_STEP || !HAS_Z2_DIR) - #error "Z_DUAL_STEPPER_DRIVERS requires Z2 pins (and an extra E plug)." -#endif - -/** - * Progress Bar - */ -#if ENABLED(LCD_PROGRESS_BAR) - #if DISABLED(SDSUPPORT) - #error "LCD_PROGRESS_BAR requires SDSUPPORT." - #endif - #if ENABLED(DOGLCD) - #error "LCD_PROGRESS_BAR does not apply to graphical displays." - #endif - #if ENABLED(FILAMENT_LCD_DISPLAY) - #error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both." - #endif -#endif - -/** - * Babystepping - */ -#if ENABLED(BABYSTEPPING) - #if DISABLED(ULTRA_LCD) - #error "BABYSTEPPING requires an LCD controller." - #endif - #if ENABLED(SCARA) - #error "BABYSTEPPING is not implemented for SCARA yet." - #endif - #if ENABLED(DELTA) && ENABLED(BABYSTEP_XY) - #error "BABYSTEPPING only implemented for Z axis on deltabots." - #endif -#endif - -/** - * Filament Runout needs a pin and either SD Support or Auto print start detection - */ -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #if !HAS_FIL_RUNOUT - #error "FILAMENT_RUNOUT_SENSOR requires FIL_RUNOUT_PIN." - #elif DISABLED(SDSUPPORT) && DISABLED(PRINTJOB_TIMER_AUTOSTART) - #error "FILAMENT_RUNOUT_SENSOR requires SDSUPPORT or PRINTJOB_TIMER_AUTOSTART." - #endif -#endif - -/** - * Filament Change with Extruder Runout Prevention - */ -#if ENABLED(FILAMENT_CHANGE_FEATURE) && ENABLED(EXTRUDER_RUNOUT_PREVENT) - #error "EXTRUDER_RUNOUT_PREVENT is incompatible with FILAMENT_CHANGE_FEATURE." -#endif - -/** - * Individual axis homing is useless for DELTAS - */ -#if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU) && ENABLED(DELTA) - #error "INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics." -#endif - -/** - * Options only for EXTRUDERS > 1 - */ -#if EXTRUDERS > 1 - - #if EXTRUDERS > 4 - #error "The maximum number of EXTRUDERS in Marlin is 4." - #endif - - #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) - #error "EXTRUDERS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT." - #endif - - #if ENABLED(HEATERS_PARALLEL) - #error "EXTRUDERS must be 1 with HEATERS_PARALLEL." - #endif - -#elif ENABLED(SINGLENOZZLE) - #error "SINGLENOZZLE requires 2 or more EXTRUDERS." -#endif - -/** - * Only one type of extruder allowed - */ -#if (ENABLED(SWITCHING_EXTRUDER) && (ENABLED(SINGLENOZZLE) || ENABLED(MIXING_EXTRUDER))) \ - || (ENABLED(SINGLENOZZLE) && ENABLED(MIXING_EXTRUDER)) - #error "Please define only one type of extruder: SINGLENOZZLE, SWITCHING_EXTRUDER, or MIXING_EXTRUDER." -#endif - -/** - * Single Stepper Dual Extruder with switching servo - */ -#if ENABLED(SWITCHING_EXTRUDER) - #if ENABLED(DUAL_X_CARRIAGE) - #error "SWITCHING_EXTRUDER and DUAL_X_CARRIAGE are incompatible." - #elif EXTRUDERS != 2 - #error "SWITCHING_EXTRUDER requires exactly 2 EXTRUDERS." - #elif NUM_SERVOS < 1 - #error "SWITCHING_EXTRUDER requires NUM_SERVOS >= 1." - #endif -#endif - -/** - * Mixing Extruder requirements - */ -#if ENABLED(MIXING_EXTRUDER) - #if EXTRUDERS > 1 - #error "MIXING_EXTRUDER currently only supports one extruder." - #endif - #if MIXING_STEPPERS < 2 - #error "You must set MIXING_STEPPERS >= 2 for a mixing extruder." - #endif - #if ENABLED(FILAMENT_SENSOR) - #error "MIXING_EXTRUDER is incompatible with FILAMENT_SENSOR. Comment out this line to use it anyway." - #endif -#endif - -/** - * Limited number of servos - */ -#if defined(NUM_SERVOS) && NUM_SERVOS > 0 - #if NUM_SERVOS > 4 - #error "The maximum number of SERVOS in Marlin is 4." - #elif HAS_Z_SERVO_ENDSTOP && Z_ENDSTOP_SERVO_NR >= NUM_SERVOS - #error "Z_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS." - #endif -#endif - -/** - * Servo deactivation depends on servo endstops - */ -#if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) && !HAS_Z_SERVO_ENDSTOP - #error "Z_ENDSTOP_SERVO_NR is required for DEACTIVATE_SERVOS_AFTER_MOVE." -#endif - -/** - * Required LCD language - */ -#if DISABLED(DOGLCD) && ENABLED(ULTRA_LCD) && !defined(DISPLAY_CHARSET_HD44780) - #error "You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller." -#endif - -/** - * Bed Heating Options - PID vs Limit Switching - */ -#if ENABLED(PIDTEMPBED) && ENABLED(BED_LIMIT_SWITCHING) - #error "To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED." -#endif - -/** - * Mesh Bed Leveling - */ -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - #error "MESH_BED_LEVELING does not yet support DELTA printers." - #elif ENABLED(AUTO_BED_LEVELING_FEATURE) - #error "Select AUTO_BED_LEVELING_FEATURE or MESH_BED_LEVELING, not both." - #elif MESH_NUM_X_POINTS > 9 || MESH_NUM_Y_POINTS > 9 - #error "MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS must be less than 10." - #endif -#elif ENABLED(MANUAL_BED_LEVELING) - #error "MESH_BED_LEVELING is required for MANUAL_BED_LEVELING." -#endif - -/** - * Probes - */ - -#if PROBE_SELECTED - - #if ENABLED(Z_PROBE_SLED) && ENABLED(DELTA) - #error "You cannot use Z_PROBE_SLED with DELTA." - #endif - - /** - * NUM_SERVOS is required for a Z servo probe - */ - #if HAS_Z_SERVO_ENDSTOP - #ifndef NUM_SERVOS - #error "You must set NUM_SERVOS for a Z servo probe (Z_ENDSTOP_SERVO_NR)." - #elif Z_ENDSTOP_SERVO_NR >= NUM_SERVOS - #error "Z_ENDSTOP_SERVO_NR must be less than NUM_SERVOS." - #endif - #endif - - /** - * A probe needs a pin - */ - #if !PROBE_PIN_CONFIGURED - #error "A probe needs a pin! Use Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN or Z_MIN_PROBE_PIN." - #endif - - /** - * Z_MIN_PIN and Z_MIN_PROBE_PIN can't co-exist when Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - */ - #if HAS_Z_MIN && HAS_Z_MIN_PROBE_PIN && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) - #error "A probe cannot have more than one pin! Use Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN or Z_MIN_PROBE_PIN." - #endif - - /** - * Make sure the plug is enabled if it's used - */ - #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && DISABLED(USE_ZMIN_PLUG) - #error "You must enable USE_ZMIN_PLUG if any probe or endstop is connected to the ZMIN plug." - #endif - - /** - * Only allow one probe option to be defined - */ - #if (ENABLED(FIX_MOUNTED_PROBE) && (ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_ENDSTOP || ENABLED(Z_PROBE_SLED))) \ - || (ENABLED(Z_PROBE_ALLEN_KEY) && (HAS_Z_SERVO_ENDSTOP || ENABLED(Z_PROBE_SLED))) \ - || (HAS_Z_SERVO_ENDSTOP && ENABLED(Z_PROBE_SLED)) - #error "Please define only one type of probe: Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE." - #endif - - /** - * Don't allow nonsense probe-pin settings - */ - #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && ENABLED(Z_MIN_PROBE_ENDSTOP) - #error "You can't enable both Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN and Z_MIN_PROBE_ENDSTOP." - #elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP) - #error "Don't enable DISABLE_Z_MIN_PROBE_ENDSTOP with Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN." - #elif ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP) && DISABLED(Z_MIN_PROBE_ENDSTOP) - #error "DISABLE_Z_MIN_PROBE_ENDSTOP requires Z_MIN_PROBE_ENDSTOP to be set." - #endif - - /** - * Require a Z probe pin if Z_MIN_PROBE_ENDSTOP is enabled. - */ - #if ENABLED(Z_MIN_PROBE_ENDSTOP) - #if !HAS_Z_MIN_PROBE_PIN - #error "Z_MIN_PROBE_ENDSTOP requires a Z_MIN_PROBE_PIN in your board's pins_XXXX.h file." - #endif - // Forcing Servo definitions can break some hall effect sensor setups. Leaving these here for further comment. - //#ifndef NUM_SERVOS - // #error "You must have NUM_SERVOS defined and there must be at least 1 configured to use Z_MIN_PROBE_ENDSTOP." - //#endif - //#if defined(NUM_SERVOS) && NUM_SERVOS < 1 - // #error "You must have at least 1 servo defined for NUM_SERVOS to use Z_MIN_PROBE_ENDSTOP." - //#endif - //#if Z_ENDSTOP_SERVO_NR < 0 - // #error "You must have Z_ENDSTOP_SERVO_NR set to at least 0 or above to use Z_MIN_PROBE_ENDSTOP." - //#endif - //#ifndef Z_SERVO_ANGLES - // #error "You must have Z_SERVO_ANGLES defined for Z Extend and Retract to use Z_MIN_PROBE_ENDSTOP." - //#endif - #endif - - /** - * Make sure Z raise values are set - */ - #if defined(Z_RAISE_BEFORE_PROBING) || defined(Z_RAISE_AFTER_PROBING) - #error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_RAISE_PROBE_DEPLOY_STOW instead." - #elif !defined(Z_RAISE_PROBE_DEPLOY_STOW) - #error "You must set Z_RAISE_PROBE_DEPLOY_STOW in your configuration." - #elif !defined(Z_RAISE_BETWEEN_PROBINGS) - #error "You must set Z_RAISE_BETWEEN_PROBINGS in your configuration." - #elif Z_RAISE_PROBE_DEPLOY_STOW < 0 - #error "Probes need Z_RAISE_PROBE_DEPLOY_STOW >= 0." - #elif Z_RAISE_BETWEEN_PROBINGS < 0 - #error "Probes need Z_RAISE_BETWEEN_PROBINGS >= 0." - #endif - -#else - - /** - * Require some kind of probe for bed leveling and probe testing - */ - #if ENABLED(AUTO_BED_LEVELING_FEATURE) - #error "AUTO_BED_LEVELING_FEATURE requires a probe! Define a Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE." - #elif ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST) - #error "Z_MIN_PROBE_REPEATABILITY_TEST requires a probe! Define a Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE." - #endif - -#endif - -/** - * Make sure Z_SAFE_HOMING point is reachable - */ -#if ENABLED(Z_SAFE_HOMING) - #if Z_SAFE_HOMING_X_POINT < MIN_PROBE_X || Z_SAFE_HOMING_X_POINT > MAX_PROBE_X - #if HAS_BED_PROBE - #error "Z_SAFE_HOMING_X_POINT can't be reached by the Z probe." - #else - #error "Z_SAFE_HOMING_X_POINT can't be reached by the nozzle." - #endif - #elif Z_SAFE_HOMING_Y_POINT < MIN_PROBE_Y || Z_SAFE_HOMING_Y_POINT > MAX_PROBE_Y - #if HAS_BED_PROBE - #error "Z_SAFE_HOMING_Y_POINT can't be reached by the Z probe." - #else - #error "Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle." - #endif - #endif -#endif // Z_SAFE_HOMING - -/** - * Auto Bed Leveling - */ -#if ENABLED(AUTO_BED_LEVELING_FEATURE) - - /** - * Delta has limited bed leveling options - */ - #if ENABLED(DELTA) && DISABLED(AUTO_BED_LEVELING_GRID) - #error "You must use AUTO_BED_LEVELING_GRID for DELTA bed leveling." - #endif - - /** - * Require a Z min pin - */ - #if !PIN_EXISTS(Z_MIN) - #if !PIN_EXISTS(Z_MIN_PROBE) || (DISABLED(Z_MIN_PROBE_ENDSTOP) || ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP)) // It's possible for someone to set a pin for the Z probe, but not enable it. - #error "AUTO_BED_LEVELING_FEATURE requires a Z_MIN or Z_PROBE endstop. Z_MIN_PIN or Z_MIN_PROBE_PIN must point to a valid hardware pin." - #endif - #endif - - /** - * Check if Probe_Offset * Grid Points is greater than Probing Range - */ - #if ENABLED(AUTO_BED_LEVELING_GRID) - #ifndef DELTA_PROBEABLE_RADIUS - // Be sure points are in the right order - #if LEFT_PROBE_BED_POSITION > RIGHT_PROBE_BED_POSITION - #error "LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION." - #elif FRONT_PROBE_BED_POSITION > BACK_PROBE_BED_POSITION - #error "FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION." - #endif - // Make sure probing points are reachable - #if LEFT_PROBE_BED_POSITION < MIN_PROBE_X - #error "The given LEFT_PROBE_BED_POSITION can't be reached by the Z probe." - #elif RIGHT_PROBE_BED_POSITION > MAX_PROBE_X - #error "The given RIGHT_PROBE_BED_POSITION can't be reached by the Z probe." - #elif FRONT_PROBE_BED_POSITION < MIN_PROBE_Y - #error "The given FRONT_PROBE_BED_POSITION can't be reached by the Z probe." - #elif BACK_PROBE_BED_POSITION > MAX_PROBE_Y - #error "The given BACK_PROBE_BED_POSITION can't be reached by the Z probe." - #endif - #endif - #else // !AUTO_BED_LEVELING_GRID - - // Check the triangulation points - #if ABL_PROBE_PT_1_X < MIN_PROBE_X || ABL_PROBE_PT_1_X > MAX_PROBE_X - #error "The given ABL_PROBE_PT_1_X can't be reached by the Z probe." - #elif ABL_PROBE_PT_2_X < MIN_PROBE_X || ABL_PROBE_PT_2_X > MAX_PROBE_X - #error "The given ABL_PROBE_PT_2_X can't be reached by the Z probe." - #elif ABL_PROBE_PT_3_X < MIN_PROBE_X || ABL_PROBE_PT_3_X > MAX_PROBE_X - #error "The given ABL_PROBE_PT_3_X can't be reached by the Z probe." - #elif ABL_PROBE_PT_1_Y < MIN_PROBE_Y || ABL_PROBE_PT_1_Y > MAX_PROBE_Y - #error "The given ABL_PROBE_PT_1_Y can't be reached by the Z probe." - #elif ABL_PROBE_PT_2_Y < MIN_PROBE_Y || ABL_PROBE_PT_2_Y > MAX_PROBE_Y - #error "The given ABL_PROBE_PT_2_Y can't be reached by the Z probe." - #elif ABL_PROBE_PT_3_Y < MIN_PROBE_Y || ABL_PROBE_PT_3_Y > MAX_PROBE_Y - #error "The given ABL_PROBE_PT_3_Y can't be reached by the Z probe." - #endif - - #endif // !AUTO_BED_LEVELING_GRID - -#endif // AUTO_BED_LEVELING_FEATURE - -/** - * Advance Extrusion - */ -#if ENABLED(ADVANCE) && ENABLED(LIN_ADVANCE) - #error "You can enable ADVANCE or LIN_ADVANCE, but not both." -#endif - -/** - * Filament Width Sensor - */ -#if ENABLED(FILAMENT_WIDTH_SENSOR) && !HAS_FILAMENT_WIDTH_SENSOR - #error "FILAMENT_WIDTH_SENSOR requires a FILWIDTH_PIN to be defined." -#endif - -/** - * ULTIPANEL encoder - */ -#if ENABLED(ULTIPANEL) && DISABLED(NEWPANEL) && DISABLED(SR_LCD_2W_NL) && !defined(SHIFT_CLK) - #error "ULTIPANEL requires some kind of encoder." -#endif - -#if ENCODER_PULSES_PER_STEP < 0 - #error "ENCODER_PULSES_PER_STEP should not be negative, use REVERSE_MENU_DIRECTION instead." -#endif - -/** - * SAV_3DGLCD display options - */ -#if ENABLED(U8GLIB_SSD1306) && ENABLED(U8GLIB_SH1106) - #error "Only enable one SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106." -#endif - -/** - * Don't set more than one kinematic type - */ -#if (ENABLED(DELTA) && (ENABLED(SCARA) || ENABLED(COREXY) || ENABLED(COREXZ) || ENABLED(COREYZ))) \ - || (ENABLED(SCARA) && (ENABLED(COREXY) || ENABLED(COREXZ) || ENABLED(COREYZ))) \ - || (ENABLED(COREXY) && (ENABLED(COREXZ) || ENABLED(COREYZ))) \ - || (ENABLED(COREXZ) && ENABLED(COREYZ)) - #error "Please enable only one of DELTA, SCARA, COREXY, COREXZ, or COREYZ." -#endif - -/** - * Allen Key - * Deploying the Allen Key probe uses big moves in z direction. Too dangerous for an unhomed z-axis. - */ -#if ENABLED(Z_PROBE_ALLEN_KEY) && (Z_HOME_DIR < 0) && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) - #error "You can't home to a z min endstop with a Z_PROBE_ALLEN_KEY" -#endif - -/** - * Dual X Carriage requirements - */ -#if ENABLED(DUAL_X_CARRIAGE) - #if EXTRUDERS == 1 - #error "DUAL_X_CARRIAGE requires 2 (or more) extruders." - #elif ENABLED(COREXY) || ENABLED(COREXZ) - #error "DUAL_X_CARRIAGE cannot be used with COREXY or COREXZ." - #elif !HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR - #error "DUAL_X_CARRIAGE requires X2 stepper pins to be defined." - #elif !HAS_X_MAX - #error "DUAL_X_CARRIAGE requires USE_XMAX_PLUG and an X Max Endstop." - #elif !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS) - #error "DUAL_X_CARRIAGE requires X2_HOME_POS, X2_MIN_POS, and X2_MAX_POS." - #elif X_HOME_DIR != -1 || X2_HOME_DIR != 1 - #error "DUAL_X_CARRIAGE requires X_HOME_DIR -1 and X2_HOME_DIR 1." - #endif -#endif // DUAL_X_CARRIAGE - -/** - * Make sure auto fan pins don't conflict with the fan pin - */ -#if HAS_AUTO_FAN - #if HAS_FAN0 - #if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN - #error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN." - #elif EXTRUDER_1_AUTO_FAN_PIN == FAN_PIN - #error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN." - #elif EXTRUDER_2_AUTO_FAN_PIN == FAN_PIN - #error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN." - #elif EXTRUDER_3_AUTO_FAN_PIN == FAN_PIN - #error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to FAN_PIN." - #endif - #endif -#endif - -#if HAS_FAN0 && CONTROLLERFAN_PIN == FAN_PIN - #error "You cannot set CONTROLLERFAN_PIN equal to FAN_PIN." -#endif - -#if HAS_CONTROLLERFAN - #if EXTRUDER_0_AUTO_FAN_PIN == CONTROLLERFAN_PIN - #error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." - #elif EXTRUDER_1_AUTO_FAN_PIN == CONTROLLERFAN_PIN - #error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." - #elif EXTRUDER_2_AUTO_FAN_PIN == CONTROLLERFAN_PIN - #error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." - #elif EXTRUDER_3_AUTO_FAN_PIN == CONTROLLERFAN_PIN - #error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." - #endif -#endif - -/** - * Test Heater, Temp Sensor, and Extruder Pins; Sensor Type must also be set. - */ -#if !HAS_HEATER_0 - #error "HEATER_0_PIN not defined for this board." -#elif !PIN_EXISTS(TEMP_0) - #error "TEMP_0_PIN not defined for this board." -#elif !PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR) || !PIN_EXISTS(E0_ENABLE) - #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board." -#elif TEMP_SENSOR_0 == 0 - #error "TEMP_SENSOR_0 is required." -#endif - -#if HOTENDS > 1 || ENABLED(HEATERS_PARALLEL) - #if !HAS_HEATER_1 - #error "HEATER_1_PIN not defined for this board." - #endif -#endif - -#if HOTENDS > 1 - #if TEMP_SENSOR_1 == 0 - #error "TEMP_SENSOR_1 is required with 2 or more HOTENDS." - #elif !PIN_EXISTS(TEMP_1) - #error "TEMP_1_PIN not defined for this board." - #endif - #if HOTENDS > 2 - #if TEMP_SENSOR_2 == 0 - #error "TEMP_SENSOR_2 is required with 3 or more HOTENDS." - #elif !HAS_HEATER_2 - #error "HEATER_2_PIN not defined for this board." - #elif !PIN_EXISTS(TEMP_2) - #error "TEMP_2_PIN not defined for this board." - #endif - #if HOTENDS > 3 - #if TEMP_SENSOR_3 == 0 - #error "TEMP_SENSOR_3 is required with 4 HOTENDS." - #elif !HAS_HEATER_3 - #error "HEATER_3_PIN not defined for this board." - #elif !PIN_EXISTS(TEMP_3) - #error "TEMP_3_PIN not defined for this board." - #endif - #elif TEMP_SENSOR_3 != 0 - #error "TEMP_SENSOR_3 shouldn't be set with only 3 extruders." - #endif - #elif TEMP_SENSOR_2 != 0 - #error "TEMP_SENSOR_2 shouldn't be set with only 2 extruders." - #elif TEMP_SENSOR_3 != 0 - #error "TEMP_SENSOR_3 shouldn't be set with only 2 extruders." - #endif -#elif TEMP_SENSOR_1 != 0 && DISABLED(TEMP_SENSOR_1_AS_REDUNDANT) - #error "TEMP_SENSOR_1 shouldn't be set with only 1 extruder." -#elif TEMP_SENSOR_2 != 0 - #error "TEMP_SENSOR_2 shouldn't be set with only 1 extruder." -#elif TEMP_SENSOR_3 != 0 - #error "TEMP_SENSOR_3 shouldn't be set with only 1 extruder." -#endif - -#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) && TEMP_SENSOR_1 == 0 - #error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT." -#endif - -/** - * Basic 2-nozzle duplication mode - */ -#if ENABLED(DUAL_NOZZLE_DUPLICATION_MODE) - #if HOTENDS != 2 - #error "DUAL_NOZZLE_DUPLICATION_MODE requires exactly 2 hotends." - #elif ENABLED(DUAL_X_CARRIAGE) - #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with DUAL_X_CARRIAGE." - #elif ENABLED(SINGLENOZZLE) - #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SINGLENOZZLE." - #elif ENABLED(MIXING_EXTRUDER) - #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with MIXING_EXTRUDER." - #elif ENABLED(SWITCHING_EXTRUDER) - #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SWITCHING_EXTRUDER." - #endif -#endif - -/** - * Test Extruder Pins - */ -#if EXTRUDERS > 3 - #if !PIN_EXISTS(E3_STEP) || !PIN_EXISTS(E3_DIR) || !PIN_EXISTS(E3_ENABLE) - #error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board." - #endif -#elif EXTRUDERS > 2 - #if !PIN_EXISTS(E2_STEP) || !PIN_EXISTS(E2_DIR) || !PIN_EXISTS(E2_ENABLE) - #error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board." - #endif -#elif EXTRUDERS > 1 - #if !PIN_EXISTS(E1_STEP) || !PIN_EXISTS(E1_DIR) || !PIN_EXISTS(E1_ENABLE) - #error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board." - #endif -#endif - -/** - * Endstops - */ -#if DISABLED(USE_XMIN_PLUG) && DISABLED(USE_XMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _XMAX_ && Z2_USE_ENDSTOP <= _XMIN_) - #error "You must enable USE_XMIN_PLUG or USE_XMAX_PLUG" -#elif DISABLED(USE_YMIN_PLUG) && DISABLED(USE_YMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _YMAX_ && Z2_USE_ENDSTOP <= _YMIN_) - #error "You must enable USE_YMIN_PLUG or USE_YMAX_PLUG" -#elif DISABLED(USE_ZMIN_PLUG) && DISABLED(USE_ZMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _ZMAX_ && Z2_USE_ENDSTOP <= _ZMIN_) - #error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG" -#elif ENABLED(Z_DUAL_ENDSTOPS) && !Z2_USE_ENDSTOP - #error "You must set Z2_USE_ENDSTOP with Z_DUAL_ENDSTOPS" -#endif - -/** - * emergency-command parser - */ -#if ENABLED(EMERGENCY_PARSER) && ENABLED(USBCON) - #error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)." -#endif - - /** - * Warnings for old configurations - */ -#if WATCH_TEMP_PERIOD > 500 - #error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds." -#elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD)) - #error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS." -#elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD) - #error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED." -#elif ENABLED(COREXZ) && ENABLED(Z_LATE_ENABLE) - #error "Z_LATE_ENABLE can't be used with COREXZ." -#elif defined(X_HOME_RETRACT_MM) - #error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM." -#elif defined(BEEPER) - #error "BEEPER is now BEEPER_PIN. Please update your pins definitions." -#elif defined(SDCARDDETECT) - #error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions." -#elif defined(SDCARDDETECTINVERTED) - #error "SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration." -#elif defined(BTENABLED) - #error "BTENABLED is now BLUETOOTH. Please update your configuration." -#elif defined(CUSTOM_MENDEL_NAME) - #error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration." -#elif defined(HAS_AUTOMATIC_VERSIONING) - #error "HAS_AUTOMATIC_VERSIONING is now USE_AUTOMATIC_VERSIONING. Please update your configuration." -#elif defined(ENABLE_AUTO_BED_LEVELING) - #error "ENABLE_AUTO_BED_LEVELING is now AUTO_BED_LEVELING_FEATURE. Please update your configuration." -#elif defined(SDSLOW) - #error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead." -#elif defined(SDEXTRASLOW) - #error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead." -#elif defined(Z_RAISE_BEFORE_HOMING) - #error "Z_RAISE_BEFORE_HOMING is deprecated. Use MIN_Z_HEIGHT_FOR_HOMING instead." -#elif defined(FILAMENT_SENSOR) - #error "FILAMENT_SENSOR is deprecated. Use FILAMENT_WIDTH_SENSOR instead." -#elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS) - #error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead." -#elif ENABLED(Z_DUAL_ENDSTOPS) && !defined(Z2_USE_ENDSTOP) - #error "Z_DUAL_ENDSTOPS settings are simplified. Just set Z2_USE_ENDSTOP to the endstop you want to repurpose for Z2" -#elif defined(LANGUAGE_INCLUDE) - #error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration." -#elif defined(EXTRUDER_OFFSET_X) || defined(EXTRUDER_OFFSET_Y) - #error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead." -#elif defined(PID_PARAMS_PER_EXTRUDER) - #error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead." -#elif defined(EXTRUDER_WATTS) - #error "EXTRUDER_WATTS is deprecated. Use HOTEND_WATTS instead." -#elif defined(SERVO_ENDSTOP_ANGLES) - #error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead." -#elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR) - #error "X_ENDSTOP_SERVO_NR and Y_ENDSTOP_SERVO_NR are deprecated and should be removed." -#elif defined(XY_TRAVEL_SPEED) - #error "XY_TRAVEL_SPEED is deprecated. Use XY_PROBE_SPEED instead." -#elif defined(PROBE_SERVO_DEACTIVATION_DELAY) - #error "PROBE_SERVO_DEACTIVATION_DELAY is deprecated. Use DEACTIVATE_SERVOS_AFTER_MOVE instead." -#elif defined(SERVO_DEACTIVATION_DELAY) - #error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead." -#elif ENABLED(FILAMENTCHANGEENABLE) - #error "FILAMENTCHANGEENABLE is now FILAMENT_CHANGE_FEATURE. Please update your configuration." -#elif defined(PLA_PREHEAT_HOTEND_TEMP) - #error "PLA_PREHEAT_HOTEND_TEMP is now PREHEAT_1_TEMP_HOTEND. Please update your configuration." -#elif defined(PLA_PREHEAT_HPB_TEMP) - #error "PLA_PREHEAT_HPB_TEMP is now PREHEAT_1_TEMP_BED. Please update your configuration." -#elif defined(PLA_PREHEAT_FAN_SPEED) - #error "PLA_PREHEAT_FAN_SPEED is now PREHEAT_1_FAN_SPEED. Please update your configuration." -#elif defined(ABS_PREHEAT_HOTEND_TEMP) - #error "ABS_PREHEAT_HOTEND_TEMP is now PREHEAT_2_TEMP_HOTEND. Please update your configuration." -#elif defined(ABS_PREHEAT_HPB_TEMP) - #error "ABS_PREHEAT_HPB_TEMP is now PREHEAT_2_TEMP_BED. Please update your configuration." -#elif defined(ABS_PREHEAT_FAN_SPEED) - #error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED. Please update your configuration." -#elif defined(ENDSTOPS_ONLY_FOR_HOMING) - #error "ENDSTOPS_ONLY_FOR_HOMING is deprecated. Use (disable) ENDSTOPS_ALWAYS_ON_DEFAULT instead." -#elif defined(HOMING_FEEDRATE) - #error "HOMING_FEEDRATE is deprecated. Set individual rates with HOMING_FEEDRATE_(XY|Z|E) instead." -#endif diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index fcf258475e..c6602ea043 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -22,6 +22,710 @@ /** * SanityCheck.h - * OBSOLETE: Moved to SanityCheck.cpp + * + * Test configuration values for errors at compile-time. + */ + +/** + * Due to the high number of issues related with old versions of Arduino IDE + * we now prevent Marlin from compiling with older toolkits. + */ +#if !defined(ARDUINO) || ARDUINO < 10600 + #error "Versions of Arduino IDE prior to 1.6.0 are no longer supported, please update your toolkit." +#endif + +/** + * We try our best to include sanity checks for all the changes configuration + * directives because people have a tendency to use outdated config files with + * the bleding edge source code, but sometimes this is not enough. This check + * will force a minimum config file revision, otherwise Marlin will not build. + */ +#if ! defined(CONFIGURATION_H_VERSION) || CONFIGURATION_H_VERSION < REQUIRED_CONFIGURATION_H_VERSION + #error "You are using an old Configuration.h file, update it before building Marlin." +#endif + +#if ! defined(CONFIGURATION_ADV_H_VERSION) || CONFIGURATION_ADV_H_VERSION < REQUIRED_CONFIGURATION_ADV_H_VERSION + #error "You are using an old Configuration_adv.h file, update it before building Marlin." +#endif + +/** + * Marlin release, version and default string + */ +#ifndef SHORT_BUILD_VERSION + #error "SHORT_BUILD_VERSION must be specified." +#elif !defined(DETAILED_BUILD_VERSION) + #error "BUILD_VERSION must be specified." +#elif !defined(STRING_DISTRIBUTION_DATE) + #error "STRING_DISTRIBUTION_DATE must be specified." +#elif !defined(PROTOCOL_VERSION) + #error "PROTOCOL_VERSION must be specified." +#elif !defined(MACHINE_NAME) + #error "MACHINE_NAME must be specified." +#elif !defined(SOURCE_CODE_URL) + #error "SOURCE_CODE_URL must be specified." +#elif !defined(DEFAULT_MACHINE_UUID) + #error "DEFAULT_MACHINE_UUID must be specified." +#elif !defined(WEBSITE_URL) + #error "WEBSITE_URL must be specified." +#endif + +/** + * Dual Stepper Drivers + */ +#if ENABLED(X_DUAL_STEPPER_DRIVERS) && ENABLED(DUAL_X_CARRIAGE) + #error "DUAL_X_CARRIAGE is not compatible with X_DUAL_STEPPER_DRIVERS." +#elif ENABLED(X_DUAL_STEPPER_DRIVERS) && (!HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR) + #error "X_DUAL_STEPPER_DRIVERS requires X2 pins (and an extra E plug)." +#elif ENABLED(Y_DUAL_STEPPER_DRIVERS) && (!HAS_Y2_ENABLE || !HAS_Y2_STEP || !HAS_Y2_DIR) + #error "Y_DUAL_STEPPER_DRIVERS requires Y2 pins (and an extra E plug)." +#elif ENABLED(Z_DUAL_STEPPER_DRIVERS) && (!HAS_Z2_ENABLE || !HAS_Z2_STEP || !HAS_Z2_DIR) + #error "Z_DUAL_STEPPER_DRIVERS requires Z2 pins (and an extra E plug)." +#endif + +/** + * Progress Bar + */ +#if ENABLED(LCD_PROGRESS_BAR) + #if DISABLED(SDSUPPORT) + #error "LCD_PROGRESS_BAR requires SDSUPPORT." + #endif + #if ENABLED(DOGLCD) + #error "LCD_PROGRESS_BAR does not apply to graphical displays." + #endif + #if ENABLED(FILAMENT_LCD_DISPLAY) + #error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both." + #endif +#endif + +/** + * Babystepping + */ +#if ENABLED(BABYSTEPPING) + #if DISABLED(ULTRA_LCD) + #error "BABYSTEPPING requires an LCD controller." + #endif + #if ENABLED(SCARA) + #error "BABYSTEPPING is not implemented for SCARA yet." + #endif + #if ENABLED(DELTA) && ENABLED(BABYSTEP_XY) + #error "BABYSTEPPING only implemented for Z axis on deltabots." + #endif +#endif + +/** + * Filament Runout needs a pin and either SD Support or Auto print start detection + */ +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #if !HAS_FIL_RUNOUT + #error "FILAMENT_RUNOUT_SENSOR requires FIL_RUNOUT_PIN." + #elif DISABLED(SDSUPPORT) && DISABLED(PRINTJOB_TIMER_AUTOSTART) + #error "FILAMENT_RUNOUT_SENSOR requires SDSUPPORT or PRINTJOB_TIMER_AUTOSTART." + #endif +#endif + +/** + * Filament Change with Extruder Runout Prevention + */ +#if ENABLED(FILAMENT_CHANGE_FEATURE) && ENABLED(EXTRUDER_RUNOUT_PREVENT) + #error "EXTRUDER_RUNOUT_PREVENT is incompatible with FILAMENT_CHANGE_FEATURE." +#endif + +/** + * Individual axis homing is useless for DELTAS + */ +#if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU) && ENABLED(DELTA) + #error "INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics." +#endif + +/** + * Options only for EXTRUDERS > 1 + */ +#if EXTRUDERS > 1 + + #if EXTRUDERS > 4 + #error "The maximum number of EXTRUDERS in Marlin is 4." + #endif + + #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) + #error "EXTRUDERS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT." + #endif + + #if ENABLED(HEATERS_PARALLEL) + #error "EXTRUDERS must be 1 with HEATERS_PARALLEL." + #endif + +#elif ENABLED(SINGLENOZZLE) + #error "SINGLENOZZLE requires 2 or more EXTRUDERS." +#endif + +/** + * Only one type of extruder allowed + */ +#if (ENABLED(SWITCHING_EXTRUDER) && (ENABLED(SINGLENOZZLE) || ENABLED(MIXING_EXTRUDER))) \ + || (ENABLED(SINGLENOZZLE) && ENABLED(MIXING_EXTRUDER)) + #error "Please define only one type of extruder: SINGLENOZZLE, SWITCHING_EXTRUDER, or MIXING_EXTRUDER." +#endif + +/** + * Single Stepper Dual Extruder with switching servo + */ +#if ENABLED(SWITCHING_EXTRUDER) + #if ENABLED(DUAL_X_CARRIAGE) + #error "SWITCHING_EXTRUDER and DUAL_X_CARRIAGE are incompatible." + #elif EXTRUDERS != 2 + #error "SWITCHING_EXTRUDER requires exactly 2 EXTRUDERS." + #elif NUM_SERVOS < 1 + #error "SWITCHING_EXTRUDER requires NUM_SERVOS >= 1." + #endif +#endif + +/** + * Mixing Extruder requirements + */ +#if ENABLED(MIXING_EXTRUDER) + #if EXTRUDERS > 1 + #error "MIXING_EXTRUDER currently only supports one extruder." + #endif + #if MIXING_STEPPERS < 2 + #error "You must set MIXING_STEPPERS >= 2 for a mixing extruder." + #endif + #if ENABLED(FILAMENT_SENSOR) + #error "MIXING_EXTRUDER is incompatible with FILAMENT_SENSOR. Comment out this line to use it anyway." + #endif +#endif + +/** + * Limited number of servos + */ +#if defined(NUM_SERVOS) && NUM_SERVOS > 0 + #if NUM_SERVOS > 4 + #error "The maximum number of SERVOS in Marlin is 4." + #elif HAS_Z_SERVO_ENDSTOP && Z_ENDSTOP_SERVO_NR >= NUM_SERVOS + #error "Z_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS." + #endif +#endif + +/** + * Servo deactivation depends on servo endstops + */ +#if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) && !HAS_Z_SERVO_ENDSTOP + #error "Z_ENDSTOP_SERVO_NR is required for DEACTIVATE_SERVOS_AFTER_MOVE." +#endif + +/** + * Required LCD language + */ +#if DISABLED(DOGLCD) && ENABLED(ULTRA_LCD) && !defined(DISPLAY_CHARSET_HD44780) + #error "You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller." +#endif + +/** + * Bed Heating Options - PID vs Limit Switching + */ +#if ENABLED(PIDTEMPBED) && ENABLED(BED_LIMIT_SWITCHING) + #error "To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED." +#endif + +/** + * Mesh Bed Leveling + */ +#if ENABLED(MESH_BED_LEVELING) + #if ENABLED(DELTA) + #error "MESH_BED_LEVELING does not yet support DELTA printers." + #elif ENABLED(AUTO_BED_LEVELING_FEATURE) + #error "Select AUTO_BED_LEVELING_FEATURE or MESH_BED_LEVELING, not both." + #elif MESH_NUM_X_POINTS > 9 || MESH_NUM_Y_POINTS > 9 + #error "MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS must be less than 10." + #endif +#elif ENABLED(MANUAL_BED_LEVELING) + #error "MESH_BED_LEVELING is required for MANUAL_BED_LEVELING." +#endif + +/** + * Probes + */ + +#if PROBE_SELECTED + + #if ENABLED(Z_PROBE_SLED) && ENABLED(DELTA) + #error "You cannot use Z_PROBE_SLED with DELTA." + #endif + + /** + * NUM_SERVOS is required for a Z servo probe + */ + #if HAS_Z_SERVO_ENDSTOP + #ifndef NUM_SERVOS + #error "You must set NUM_SERVOS for a Z servo probe (Z_ENDSTOP_SERVO_NR)." + #elif Z_ENDSTOP_SERVO_NR >= NUM_SERVOS + #error "Z_ENDSTOP_SERVO_NR must be less than NUM_SERVOS." + #endif + #endif + + /** + * A probe needs a pin + */ + #if !PROBE_PIN_CONFIGURED + #error "A probe needs a pin! Use Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN or Z_MIN_PROBE_PIN." + #endif + + /** + * Z_MIN_PIN and Z_MIN_PROBE_PIN can't co-exist when Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + */ + #if HAS_Z_MIN && HAS_Z_MIN_PROBE_PIN && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) + #error "A probe cannot have more than one pin! Use Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN or Z_MIN_PROBE_PIN." + #endif + + /** + * Make sure the plug is enabled if it's used + */ + #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && DISABLED(USE_ZMIN_PLUG) + #error "You must enable USE_ZMIN_PLUG if any probe or endstop is connected to the ZMIN plug." + #endif + + /** + * Only allow one probe option to be defined + */ + #if (ENABLED(FIX_MOUNTED_PROBE) && (ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_ENDSTOP || ENABLED(Z_PROBE_SLED))) \ + || (ENABLED(Z_PROBE_ALLEN_KEY) && (HAS_Z_SERVO_ENDSTOP || ENABLED(Z_PROBE_SLED))) \ + || (HAS_Z_SERVO_ENDSTOP && ENABLED(Z_PROBE_SLED)) + #error "Please define only one type of probe: Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE." + #endif + + /** + * Don't allow nonsense probe-pin settings + */ + #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && ENABLED(Z_MIN_PROBE_ENDSTOP) + #error "You can't enable both Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN and Z_MIN_PROBE_ENDSTOP." + #elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP) + #error "Don't enable DISABLE_Z_MIN_PROBE_ENDSTOP with Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN." + #elif ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP) && DISABLED(Z_MIN_PROBE_ENDSTOP) + #error "DISABLE_Z_MIN_PROBE_ENDSTOP requires Z_MIN_PROBE_ENDSTOP to be set." + #endif + + /** + * Require a Z probe pin if Z_MIN_PROBE_ENDSTOP is enabled. + */ + #if ENABLED(Z_MIN_PROBE_ENDSTOP) + #if !HAS_Z_MIN_PROBE_PIN + #error "Z_MIN_PROBE_ENDSTOP requires a Z_MIN_PROBE_PIN in your board's pins_XXXX.h file." + #endif + // Forcing Servo definitions can break some hall effect sensor setups. Leaving these here for further comment. + //#ifndef NUM_SERVOS + // #error "You must have NUM_SERVOS defined and there must be at least 1 configured to use Z_MIN_PROBE_ENDSTOP." + //#endif + //#if defined(NUM_SERVOS) && NUM_SERVOS < 1 + // #error "You must have at least 1 servo defined for NUM_SERVOS to use Z_MIN_PROBE_ENDSTOP." + //#endif + //#if Z_ENDSTOP_SERVO_NR < 0 + // #error "You must have Z_ENDSTOP_SERVO_NR set to at least 0 or above to use Z_MIN_PROBE_ENDSTOP." + //#endif + //#ifndef Z_SERVO_ANGLES + // #error "You must have Z_SERVO_ANGLES defined for Z Extend and Retract to use Z_MIN_PROBE_ENDSTOP." + //#endif + #endif + + /** + * Make sure Z raise values are set + */ + #if defined(Z_RAISE_BEFORE_PROBING) || defined(Z_RAISE_AFTER_PROBING) + #error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_RAISE_PROBE_DEPLOY_STOW instead." + #elif !defined(Z_RAISE_PROBE_DEPLOY_STOW) + #error "You must set Z_RAISE_PROBE_DEPLOY_STOW in your configuration." + #elif !defined(Z_RAISE_BETWEEN_PROBINGS) + #error "You must set Z_RAISE_BETWEEN_PROBINGS in your configuration." + #elif Z_RAISE_PROBE_DEPLOY_STOW < 0 + #error "Probes need Z_RAISE_PROBE_DEPLOY_STOW >= 0." + #elif Z_RAISE_BETWEEN_PROBINGS < 0 + #error "Probes need Z_RAISE_BETWEEN_PROBINGS >= 0." + #endif + +#else + + /** + * Require some kind of probe for bed leveling and probe testing + */ + #if ENABLED(AUTO_BED_LEVELING_FEATURE) + #error "AUTO_BED_LEVELING_FEATURE requires a probe! Define a Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE." + #elif ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST) + #error "Z_MIN_PROBE_REPEATABILITY_TEST requires a probe! Define a Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE." + #endif + +#endif + +/** + * Make sure Z_SAFE_HOMING point is reachable + */ +#if ENABLED(Z_SAFE_HOMING) + #if Z_SAFE_HOMING_X_POINT < MIN_PROBE_X || Z_SAFE_HOMING_X_POINT > MAX_PROBE_X + #if HAS_BED_PROBE + #error "Z_SAFE_HOMING_X_POINT can't be reached by the Z probe." + #else + #error "Z_SAFE_HOMING_X_POINT can't be reached by the nozzle." + #endif + #elif Z_SAFE_HOMING_Y_POINT < MIN_PROBE_Y || Z_SAFE_HOMING_Y_POINT > MAX_PROBE_Y + #if HAS_BED_PROBE + #error "Z_SAFE_HOMING_Y_POINT can't be reached by the Z probe." + #else + #error "Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle." + #endif + #endif +#endif // Z_SAFE_HOMING + +/** + * Auto Bed Leveling + */ +#if ENABLED(AUTO_BED_LEVELING_FEATURE) + + /** + * Delta has limited bed leveling options + */ + #if ENABLED(DELTA) && DISABLED(AUTO_BED_LEVELING_GRID) + #error "You must use AUTO_BED_LEVELING_GRID for DELTA bed leveling." + #endif + + /** + * Require a Z min pin + */ + #if !PIN_EXISTS(Z_MIN) + #if !PIN_EXISTS(Z_MIN_PROBE) || (DISABLED(Z_MIN_PROBE_ENDSTOP) || ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP)) // It's possible for someone to set a pin for the Z probe, but not enable it. + #error "AUTO_BED_LEVELING_FEATURE requires a Z_MIN or Z_PROBE endstop. Z_MIN_PIN or Z_MIN_PROBE_PIN must point to a valid hardware pin." + #endif + #endif + + /** + * Check if Probe_Offset * Grid Points is greater than Probing Range + */ + #if ENABLED(AUTO_BED_LEVELING_GRID) + #ifndef DELTA_PROBEABLE_RADIUS + // Be sure points are in the right order + #if LEFT_PROBE_BED_POSITION > RIGHT_PROBE_BED_POSITION + #error "LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION." + #elif FRONT_PROBE_BED_POSITION > BACK_PROBE_BED_POSITION + #error "FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION." + #endif + // Make sure probing points are reachable + #if LEFT_PROBE_BED_POSITION < MIN_PROBE_X + #error "The given LEFT_PROBE_BED_POSITION can't be reached by the Z probe." + #elif RIGHT_PROBE_BED_POSITION > MAX_PROBE_X + #error "The given RIGHT_PROBE_BED_POSITION can't be reached by the Z probe." + #elif FRONT_PROBE_BED_POSITION < MIN_PROBE_Y + #error "The given FRONT_PROBE_BED_POSITION can't be reached by the Z probe." + #elif BACK_PROBE_BED_POSITION > MAX_PROBE_Y + #error "The given BACK_PROBE_BED_POSITION can't be reached by the Z probe." + #endif + #endif + #else // !AUTO_BED_LEVELING_GRID + + // Check the triangulation points + #if ABL_PROBE_PT_1_X < MIN_PROBE_X || ABL_PROBE_PT_1_X > MAX_PROBE_X + #error "The given ABL_PROBE_PT_1_X can't be reached by the Z probe." + #elif ABL_PROBE_PT_2_X < MIN_PROBE_X || ABL_PROBE_PT_2_X > MAX_PROBE_X + #error "The given ABL_PROBE_PT_2_X can't be reached by the Z probe." + #elif ABL_PROBE_PT_3_X < MIN_PROBE_X || ABL_PROBE_PT_3_X > MAX_PROBE_X + #error "The given ABL_PROBE_PT_3_X can't be reached by the Z probe." + #elif ABL_PROBE_PT_1_Y < MIN_PROBE_Y || ABL_PROBE_PT_1_Y > MAX_PROBE_Y + #error "The given ABL_PROBE_PT_1_Y can't be reached by the Z probe." + #elif ABL_PROBE_PT_2_Y < MIN_PROBE_Y || ABL_PROBE_PT_2_Y > MAX_PROBE_Y + #error "The given ABL_PROBE_PT_2_Y can't be reached by the Z probe." + #elif ABL_PROBE_PT_3_Y < MIN_PROBE_Y || ABL_PROBE_PT_3_Y > MAX_PROBE_Y + #error "The given ABL_PROBE_PT_3_Y can't be reached by the Z probe." + #endif + + #endif // !AUTO_BED_LEVELING_GRID + +#endif // AUTO_BED_LEVELING_FEATURE + +/** + * Advance Extrusion + */ +#if ENABLED(ADVANCE) && ENABLED(LIN_ADVANCE) + #error "You can enable ADVANCE or LIN_ADVANCE, but not both." +#endif + +/** + * Filament Width Sensor + */ +#if ENABLED(FILAMENT_WIDTH_SENSOR) && !HAS_FILAMENT_WIDTH_SENSOR + #error "FILAMENT_WIDTH_SENSOR requires a FILWIDTH_PIN to be defined." +#endif + +/** + * ULTIPANEL encoder + */ +#if ENABLED(ULTIPANEL) && DISABLED(NEWPANEL) && DISABLED(SR_LCD_2W_NL) && !defined(SHIFT_CLK) + #error "ULTIPANEL requires some kind of encoder." +#endif + +#if ENCODER_PULSES_PER_STEP < 0 + #error "ENCODER_PULSES_PER_STEP should not be negative, use REVERSE_MENU_DIRECTION instead." +#endif + +/** + * SAV_3DGLCD display options + */ +#if ENABLED(U8GLIB_SSD1306) && ENABLED(U8GLIB_SH1106) + #error "Only enable one SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106." +#endif + +/** + * Don't set more than one kinematic type + */ +#if (ENABLED(DELTA) && (ENABLED(SCARA) || ENABLED(COREXY) || ENABLED(COREXZ) || ENABLED(COREYZ))) \ + || (ENABLED(SCARA) && (ENABLED(COREXY) || ENABLED(COREXZ) || ENABLED(COREYZ))) \ + || (ENABLED(COREXY) && (ENABLED(COREXZ) || ENABLED(COREYZ))) \ + || (ENABLED(COREXZ) && ENABLED(COREYZ)) + #error "Please enable only one of DELTA, SCARA, COREXY, COREXZ, or COREYZ." +#endif + +/** + * Allen Key + * Deploying the Allen Key probe uses big moves in z direction. Too dangerous for an unhomed z-axis. + */ +#if ENABLED(Z_PROBE_ALLEN_KEY) && (Z_HOME_DIR < 0) && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) + #error "You can't home to a z min endstop with a Z_PROBE_ALLEN_KEY" +#endif + +/** + * Dual X Carriage requirements + */ +#if ENABLED(DUAL_X_CARRIAGE) + #if EXTRUDERS == 1 + #error "DUAL_X_CARRIAGE requires 2 (or more) extruders." + #elif ENABLED(COREXY) || ENABLED(COREXZ) + #error "DUAL_X_CARRIAGE cannot be used with COREXY or COREXZ." + #elif !HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR + #error "DUAL_X_CARRIAGE requires X2 stepper pins to be defined." + #elif !HAS_X_MAX + #error "DUAL_X_CARRIAGE requires USE_XMAX_PLUG and an X Max Endstop." + #elif !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS) + #error "DUAL_X_CARRIAGE requires X2_HOME_POS, X2_MIN_POS, and X2_MAX_POS." + #elif X_HOME_DIR != -1 || X2_HOME_DIR != 1 + #error "DUAL_X_CARRIAGE requires X_HOME_DIR -1 and X2_HOME_DIR 1." + #endif +#endif // DUAL_X_CARRIAGE + +/** + * Make sure auto fan pins don't conflict with the fan pin + */ +#if HAS_AUTO_FAN + #if HAS_FAN0 + #if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN + #error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN." + #elif EXTRUDER_1_AUTO_FAN_PIN == FAN_PIN + #error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN." + #elif EXTRUDER_2_AUTO_FAN_PIN == FAN_PIN + #error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN." + #elif EXTRUDER_3_AUTO_FAN_PIN == FAN_PIN + #error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to FAN_PIN." + #endif + #endif +#endif + +#if HAS_FAN0 && CONTROLLERFAN_PIN == FAN_PIN + #error "You cannot set CONTROLLERFAN_PIN equal to FAN_PIN." +#endif + +#if HAS_CONTROLLERFAN + #if EXTRUDER_0_AUTO_FAN_PIN == CONTROLLERFAN_PIN + #error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." + #elif EXTRUDER_1_AUTO_FAN_PIN == CONTROLLERFAN_PIN + #error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." + #elif EXTRUDER_2_AUTO_FAN_PIN == CONTROLLERFAN_PIN + #error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." + #elif EXTRUDER_3_AUTO_FAN_PIN == CONTROLLERFAN_PIN + #error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN." + #endif +#endif + +/** + * Test Heater, Temp Sensor, and Extruder Pins; Sensor Type must also be set. + */ +#if !HAS_HEATER_0 + #error "HEATER_0_PIN not defined for this board." +#elif !PIN_EXISTS(TEMP_0) + #error "TEMP_0_PIN not defined for this board." +#elif !PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR) || !PIN_EXISTS(E0_ENABLE) + #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board." +#elif TEMP_SENSOR_0 == 0 + #error "TEMP_SENSOR_0 is required." +#endif + +#if HOTENDS > 1 || ENABLED(HEATERS_PARALLEL) + #if !HAS_HEATER_1 + #error "HEATER_1_PIN not defined for this board." + #endif +#endif + +#if HOTENDS > 1 + #if TEMP_SENSOR_1 == 0 + #error "TEMP_SENSOR_1 is required with 2 or more HOTENDS." + #elif !PIN_EXISTS(TEMP_1) + #error "TEMP_1_PIN not defined for this board." + #endif + #if HOTENDS > 2 + #if TEMP_SENSOR_2 == 0 + #error "TEMP_SENSOR_2 is required with 3 or more HOTENDS." + #elif !HAS_HEATER_2 + #error "HEATER_2_PIN not defined for this board." + #elif !PIN_EXISTS(TEMP_2) + #error "TEMP_2_PIN not defined for this board." + #endif + #if HOTENDS > 3 + #if TEMP_SENSOR_3 == 0 + #error "TEMP_SENSOR_3 is required with 4 HOTENDS." + #elif !HAS_HEATER_3 + #error "HEATER_3_PIN not defined for this board." + #elif !PIN_EXISTS(TEMP_3) + #error "TEMP_3_PIN not defined for this board." + #endif + #elif TEMP_SENSOR_3 != 0 + #error "TEMP_SENSOR_3 shouldn't be set with only 3 extruders." + #endif + #elif TEMP_SENSOR_2 != 0 + #error "TEMP_SENSOR_2 shouldn't be set with only 2 extruders." + #elif TEMP_SENSOR_3 != 0 + #error "TEMP_SENSOR_3 shouldn't be set with only 2 extruders." + #endif +#elif TEMP_SENSOR_1 != 0 && DISABLED(TEMP_SENSOR_1_AS_REDUNDANT) + #error "TEMP_SENSOR_1 shouldn't be set with only 1 extruder." +#elif TEMP_SENSOR_2 != 0 + #error "TEMP_SENSOR_2 shouldn't be set with only 1 extruder." +#elif TEMP_SENSOR_3 != 0 + #error "TEMP_SENSOR_3 shouldn't be set with only 1 extruder." +#endif + +#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) && TEMP_SENSOR_1 == 0 + #error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT." +#endif + +/** + * Basic 2-nozzle duplication mode + */ +#if ENABLED(DUAL_NOZZLE_DUPLICATION_MODE) + #if HOTENDS != 2 + #error "DUAL_NOZZLE_DUPLICATION_MODE requires exactly 2 hotends." + #elif ENABLED(DUAL_X_CARRIAGE) + #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with DUAL_X_CARRIAGE." + #elif ENABLED(SINGLENOZZLE) + #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SINGLENOZZLE." + #elif ENABLED(MIXING_EXTRUDER) + #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with MIXING_EXTRUDER." + #elif ENABLED(SWITCHING_EXTRUDER) + #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SWITCHING_EXTRUDER." + #endif +#endif + +/** + * Test Extruder Pins + */ +#if EXTRUDERS > 3 + #if !PIN_EXISTS(E3_STEP) || !PIN_EXISTS(E3_DIR) || !PIN_EXISTS(E3_ENABLE) + #error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board." + #endif +#elif EXTRUDERS > 2 + #if !PIN_EXISTS(E2_STEP) || !PIN_EXISTS(E2_DIR) || !PIN_EXISTS(E2_ENABLE) + #error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board." + #endif +#elif EXTRUDERS > 1 + #if !PIN_EXISTS(E1_STEP) || !PIN_EXISTS(E1_DIR) || !PIN_EXISTS(E1_ENABLE) + #error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board." + #endif +#endif + +/** + * Endstops + */ +#if DISABLED(USE_XMIN_PLUG) && DISABLED(USE_XMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _XMAX_ && Z2_USE_ENDSTOP <= _XMIN_) + #error "You must enable USE_XMIN_PLUG or USE_XMAX_PLUG" +#elif DISABLED(USE_YMIN_PLUG) && DISABLED(USE_YMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _YMAX_ && Z2_USE_ENDSTOP <= _YMIN_) + #error "You must enable USE_YMIN_PLUG or USE_YMAX_PLUG" +#elif DISABLED(USE_ZMIN_PLUG) && DISABLED(USE_ZMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _ZMAX_ && Z2_USE_ENDSTOP <= _ZMIN_) + #error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG" +#elif ENABLED(Z_DUAL_ENDSTOPS) && !Z2_USE_ENDSTOP + #error "You must set Z2_USE_ENDSTOP with Z_DUAL_ENDSTOPS" +#endif + +/** + * emergency-command parser + */ +#if ENABLED(EMERGENCY_PARSER) && ENABLED(USBCON) + #error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)." +#endif + + /** + * Warnings for old configurations */ -#error "Please remove all #include lines from your Configuration.h and Configuration_adv.h files!" +#if WATCH_TEMP_PERIOD > 500 + #error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds." +#elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD)) + #error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS." +#elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD) + #error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED." +#elif ENABLED(COREXZ) && ENABLED(Z_LATE_ENABLE) + #error "Z_LATE_ENABLE can't be used with COREXZ." +#elif defined(X_HOME_RETRACT_MM) + #error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM." +#elif defined(BEEPER) + #error "BEEPER is now BEEPER_PIN. Please update your pins definitions." +#elif defined(SDCARDDETECT) + #error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions." +#elif defined(SDCARDDETECTINVERTED) + #error "SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration." +#elif defined(BTENABLED) + #error "BTENABLED is now BLUETOOTH. Please update your configuration." +#elif defined(CUSTOM_MENDEL_NAME) + #error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration." +#elif defined(HAS_AUTOMATIC_VERSIONING) + #error "HAS_AUTOMATIC_VERSIONING is now USE_AUTOMATIC_VERSIONING. Please update your configuration." +#elif defined(ENABLE_AUTO_BED_LEVELING) + #error "ENABLE_AUTO_BED_LEVELING is now AUTO_BED_LEVELING_FEATURE. Please update your configuration." +#elif defined(SDSLOW) + #error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead." +#elif defined(SDEXTRASLOW) + #error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead." +#elif defined(Z_RAISE_BEFORE_HOMING) + #error "Z_RAISE_BEFORE_HOMING is deprecated. Use MIN_Z_HEIGHT_FOR_HOMING instead." +#elif defined(FILAMENT_SENSOR) + #error "FILAMENT_SENSOR is deprecated. Use FILAMENT_WIDTH_SENSOR instead." +#elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS) + #error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead." +#elif ENABLED(Z_DUAL_ENDSTOPS) && !defined(Z2_USE_ENDSTOP) + #error "Z_DUAL_ENDSTOPS settings are simplified. Just set Z2_USE_ENDSTOP to the endstop you want to repurpose for Z2" +#elif defined(LANGUAGE_INCLUDE) + #error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration." +#elif defined(EXTRUDER_OFFSET_X) || defined(EXTRUDER_OFFSET_Y) + #error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead." +#elif defined(PID_PARAMS_PER_EXTRUDER) + #error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead." +#elif defined(EXTRUDER_WATTS) + #error "EXTRUDER_WATTS is deprecated. Use HOTEND_WATTS instead." +#elif defined(SERVO_ENDSTOP_ANGLES) + #error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead." +#elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR) + #error "X_ENDSTOP_SERVO_NR and Y_ENDSTOP_SERVO_NR are deprecated and should be removed." +#elif defined(XY_TRAVEL_SPEED) + #error "XY_TRAVEL_SPEED is deprecated. Use XY_PROBE_SPEED instead." +#elif defined(PROBE_SERVO_DEACTIVATION_DELAY) + #error "PROBE_SERVO_DEACTIVATION_DELAY is deprecated. Use DEACTIVATE_SERVOS_AFTER_MOVE instead." +#elif defined(SERVO_DEACTIVATION_DELAY) + #error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead." +#elif ENABLED(FILAMENTCHANGEENABLE) + #error "FILAMENTCHANGEENABLE is now FILAMENT_CHANGE_FEATURE. Please update your configuration." +#elif defined(PLA_PREHEAT_HOTEND_TEMP) + #error "PLA_PREHEAT_HOTEND_TEMP is now PREHEAT_1_TEMP_HOTEND. Please update your configuration." +#elif defined(PLA_PREHEAT_HPB_TEMP) + #error "PLA_PREHEAT_HPB_TEMP is now PREHEAT_1_TEMP_BED. Please update your configuration." +#elif defined(PLA_PREHEAT_FAN_SPEED) + #error "PLA_PREHEAT_FAN_SPEED is now PREHEAT_1_FAN_SPEED. Please update your configuration." +#elif defined(ABS_PREHEAT_HOTEND_TEMP) + #error "ABS_PREHEAT_HOTEND_TEMP is now PREHEAT_2_TEMP_HOTEND. Please update your configuration." +#elif defined(ABS_PREHEAT_HPB_TEMP) + #error "ABS_PREHEAT_HPB_TEMP is now PREHEAT_2_TEMP_BED. Please update your configuration." +#elif defined(ABS_PREHEAT_FAN_SPEED) + #error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED. Please update your configuration." +#elif defined(ENDSTOPS_ONLY_FOR_HOMING) + #error "ENDSTOPS_ONLY_FOR_HOMING is deprecated. Use (disable) ENDSTOPS_ALWAYS_ON_DEFAULT instead." +#elif defined(HOMING_FEEDRATE) + #error "HOMING_FEEDRATE is deprecated. Set individual rates with HOMING_FEEDRATE_(XY|Z|E) instead." +#endif