andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Merge pull request #8425 from Vynt-1/bugfix-2.0.x 

Update pins_RuRAMPS
pull/1/head
Scott Lahteine 7 years ago
committed by GitHub
parent
9770062309 e2724c68ab
commit
5cfdb76186
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 122 additions and 77 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 2
      Marlin/src/module/temperature.cpp
  2. 197
      Marlin/src/pins/pins_RURAMPS4D.h

2
Marlin/src/module/temperature.cpp
View File

@ -1302,7 +1302,7 @@ void Temperature::init() {
case TIMER5A: case TIMER5B: case TIMER5C: _SET_CS(5, val); break;
#endif
}
#endif
#endif
}
#endif // FAST_PWM_FAN

197
Marlin/src/pins/pins_RURAMPS4D.h
View File

@ -29,9 +29,7 @@
*
* Differences between
* RADDS | RuRAMPS4DUE
* A13 | A9/D63 (shares the same pin with AUX2_4PIN)
* A14 | A10/D64 (shares the same pin with AUX2_5PIN)
* A15 | NC
* |
*/
#ifndef __SAM3X8E__
@ -39,16 +37,14 @@
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "RuRAMPS4Due"
#define BOARD_NAME "RuRAMPS4Due"
#endif
#define RURAMPS4DUE // #1550 in boards.h
#undef INVERTED_HEATER_PINS
#undef INVERTED_BED_PINS
#undef INVERTED_FAN_PINS
#define I2C_EEPROM
//#define SPI_EEPROM
//
// Servos
//
@ -77,18 +73,18 @@
//
// Steppers
//
#define X_STEP_PIN 37
#define X_STEP_PIN 37 // Support Extension Board
#define X_DIR_PIN 36
#define X_ENABLE_PIN 38
#define X_CS_PIN -1
#define Y_STEP_PIN 32
#define Y_STEP_PIN 32 // Support Extension Board
#define Y_DIR_PIN 35
#define Y_ENABLE_PIN 34
#define Y_CS_PIN -1
#define Z_STEP_PIN 30
#define Z_DIR_PIN 2
#define Z_STEP_PIN 30 // Support Extension Board
#define Z_DIR_PIN 2
#define Z_ENABLE_PIN 33
#define Z_CS_PIN -1
@ -102,48 +98,43 @@
#define E1_ENABLE_PIN 26
#define E1_CS_PIN -1
#define E2_STEP_PIN 25 //14 //sys0724
#define E2_DIR_PIN 23 //15
#define E2_ENABLE_PIN 27 //61
#define E2_STEP_PIN 25
#define E2_DIR_PIN 23
#define E2_ENABLE_PIN 27
#define E2_CS_PIN -1
// For Extension Board V2
// http://doku.radds.org/dokumentation/extension-board
//#define E3_STEP_PIN 35
//#define E3_DIR_PIN 33
//#define E3_ENABLE_PIN 37
//#define E3_CS_PIN 6
//#define Z2_STEP_PIN 29
//#define Z2_DIR_PIN 27
//#define Z2_ENABLE_PIN 31
//#define Z2_CS_PIN 39
#define E3_STEP_PIN 15 // Only For Extension Board
#define E3_DIR_PIN 14
#define E3_ENABLE_PIN 61
#define E3_CS_PIN -1
// Microstepping pins - Mapping not from fastio.h (?)
//#define E3_MS1_PIN 67
//#define E3_MS2_PIN 68
//#define E3_MS3_PIN 69
//#define Z2_MS1_PIN 67 // shared with E3_MS1_PIN
//#define Z2_MS2_PIN 68 // shared with E3_MS2_PIN
//#define Z2_MS3_PIN 69 // shared with E3_MS3_PIN
// For Future: Microstepping pins - Mapping not from fastio.h (?)
//#define E3_MS1_PIN ?
//#define E3_MS2_PIN ?
//#define E3_MS3_PIN ?
//#define Z2_MS1_PIN ? // shared with E3_MS1_PIN
//#define Z2_MS2_PIN ? // shared with E3_MS2_PIN
//#define Z2_MS3_PIN ? // shared with E3_MS3_PIN
//
// Temperature Sensors
// Limit Switches
//
#define TEMP_0_PIN 0 // ANALOG NUMBERING #54
#define TEMP_1_PIN 1 // ANALOG NUMBERING #55
#define TEMP_2_PIN 2 // ANALOG NUMBERING #56
#define TEMP_3_PIN 3 // ANALOG NUMBERING #57
#define TEMP_BED_PIN 4 // ANALOG NUMBERING #58
#define X_MIN_PIN 45
#define X_MAX_PIN 39
#define Y_MIN_PIN 46
#define Y_MAX_PIN 41
#define Z_MIN_PIN 47
#define Z_MAX_PIN 43
/*
// SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT)
#define MAX6675_SS 53
#else
#define MAX6675_SS 49
#if !ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#define Z_PROBE_PIN 49
#endif // else Z_PROBE_PIN = Z_MIN_PIN
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN Y_MIN_PIN
#endif
#endif
*/
//
// Heaters / Fans
@ -151,18 +142,73 @@
#define HEATER_0_PIN 13
#define HEATER_1_PIN 12
#define HEATER_2_PIN 11
#define HEATER_BED_PIN 7 // BED H1
#define HEATER_BED_PIN 7 // BED H1
#define FAN_PIN 9
#define FAN1_PIN 8
#define CONTROLLER_FAN_PIN -1
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // ANALOG A0
#define TEMP_1_PIN 1 // ANALOG A1
#define TEMP_2_PIN 2 // ANALOG A2
#define TEMP_3_PIN 3 // ANALOG A2
#define TEMP_BED_PIN 4 // ANALOG A3
//Thermocouple Use Analog Pins
#if ENABLED(VER_WITH_THERMOCOUPLE) // If Nead, define is in Configuration.h
#define TEMP_4_PIN 5 // A5
#define TEMP_5_PIN 6 // A6 (Marlin 2.0 not support)
#endif
// SPI for Max6675 or Max31855 Thermocouple
//#if DISABLED(SDSUPPORT)
// #define MAX6675_SS 53
//#else
// #define MAX6675_SS 49
//#endif
//
// Servos
//
#define SERVO0_PIN 5
#define SERVO1_PIN 3
#define SERVO2_PIN -1
#define SERVO3_PIN -1
//
// Misc. Functions
//
#define SDSS 4 // 4,10,52 if using HW SPI.
#define LED_PIN 13
#define SDSS 4 // 4,10,52 if using HW SPI.
#define LED_PIN -1 // 13 - HEATER_0_PIN
#define SDPOWER -1
#define PS_ON_PIN -1 // 65
#define KILL_PIN -1
// MKS TFT / Nextion Use internal USART-1
#define TFT_LCD_MODULE_COM 1
#define TFT_LCD_MODULE_BAUDRATE 115600
// ESP WiFi Use internal USART-2
#define ESP_WIFI_MODULE_COM 2
#define ESP_WIFI_MODULE_BAUDRATE 115600
#define ESP_WIFI_MODULE_RESET_PIN -1
#define PIGGY_GPIO_PIN -1
//#define FIL_RUNOUT_PIN Y_MIN_PIN
//
// EEPROM
//
#define E2END 0x8000 // 32Kb (24lc256)
#define I2C_EEPROM // EEPROM on I2C-0
//#define EEPROM_SD // EEPROM on SDCARD
//#define SPI_EEPROM // EEPROM on SPI-0
//#define SPI_CHAN_EEPROM1 ?
//#define SPI_EEPROM1_CS ?
// 2K EEPROM
//#define SPI_EEPROM2_CS ?
// 32Mb FLASH
//#define SPI_FLASH_CS ?
//
// LCD / Controller
@ -186,39 +232,38 @@
#define SD_DETECT_PIN 51
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define LCD_PINS_RS 52 //?
#define LCD_PINS_ENABLE 53 //?
#define LCD_PINS_D4 48 //?
#define LCD_PINS_D5 50 //?
#define LCD_PINS_D6 52 //?
#define LCD_PINS_D7 53 //?
#define LCD_PINS_RS 52
#define LCD_PINS_ENABLE 53
#define LCD_PINS_D4 48
#define LCD_PINS_D5 50
#define LCD_PINS_D6 52
#define LCD_PINS_D7 53
#define BEEPER_PIN 62
#define BTN_EN1 44 //!
#define BTN_EN2 42 //!
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BTN_EN1 44
#define BTN_EN2 42
#define BTN_ENC 40
#define SD_DETECT_PIN 51
#endif
#elif ENABLED(SSD1306_OLED_I2C_CONTROLLER)
#define BTN_EN1 44
#define BTN_EN2 42
#define BTN_ENC 40
#define BEEPER_PIN 62
#define LCD_SDSS 10
#define SD_DETECT_PIN 51
#elif ENABLED(SSD1306_OLED_I2C_CONTROLLER)
#define BTN_EN1 44 //?
#define BTN_EN2 42 //?
#define BTN_ENC 40 //?
#define SD_DETECT_PIN 51 //?
#define BEEPER_PIN 62 //?
#define LCD_SDSS 10 //?
#elif ENABLED(SPARK_FULL_GRAPHICS) //!!! - check!
#define LCD_PINS_D4 29
#define LCD_PINS_ENABLE 27
#define LCD_PINS_RS 25
#define BTN_EN1 35
#define BTN_EN2 33
#define BTN_ENC 37
#elif ENABLED(SPARK_FULL_GRAPHICS)
//http://doku.radds.org/dokumentation/other-electronics/sparklcd/
#error "Oops! SPARK_FULL_GRAPHICS not supported with this board"
//#define LCD_PINS_D4 29//?
//#define LCD_PINS_ENABLE 27//?
//#define LCD_PINS_RS 25//?
//#define BTN_EN1 35//?
//#define BTN_EN2 33//?
//#define BTN_ENC 37//?
#endif // SPARK_FULL_GRAPHICS
#endif // ULTRA_LCD

Write Preview
Loading…
Cancel
Save