From 5bf82b34c6b3b22ca8530115f48db4c91518eb71 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Sat, 7 Nov 2020 17:55:31 -0600
Subject: [PATCH] Temperature 'autostart' => 'auto_job'

---
 Marlin/src/gcode/temp/M104_M109.cpp | 4 ++--
 Marlin/src/gcode/temp/M140_M190.cpp | 4 ++--
 Marlin/src/gcode/temp/M141_M191.cpp | 4 ++--
 Marlin/src/module/temperature.cpp   | 6 +++---
 Marlin/src/module/temperature.h     | 4 ++--
 5 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/Marlin/src/gcode/temp/M104_M109.cpp b/Marlin/src/gcode/temp/M104_M109.cpp
index d2b466e2fb..90e1b601e4 100644
--- a/Marlin/src/gcode/temp/M104_M109.cpp
+++ b/Marlin/src/gcode/temp/M104_M109.cpp
@@ -105,7 +105,7 @@ void GcodeSuite::M104() {
        * mode, for instance in a dual extruder setup, without affecting the running
        * print timer.
        */
-      thermalManager.check_timer_autostart(false, true);
+      thermalManager.auto_job_check_timer(false, true);
     #endif
   }
 
@@ -182,7 +182,7 @@ void GcodeSuite::M109() {
        * standby mode, (e.g., in a dual extruder setup) without affecting
        * the running print timer.
        */
-      thermalManager.check_timer_autostart(true, true);
+      thermalManager.auto_job_check_timer(true, true);
     #endif
 
     #if HAS_DISPLAY
diff --git a/Marlin/src/gcode/temp/M140_M190.cpp b/Marlin/src/gcode/temp/M140_M190.cpp
index ac8228085e..d684127fe1 100644
--- a/Marlin/src/gcode/temp/M140_M190.cpp
+++ b/Marlin/src/gcode/temp/M140_M190.cpp
@@ -81,7 +81,7 @@ void GcodeSuite::M140() {
        * temperatures need to be set below mintemp. Order of M140, M104, and M141
        * at the end of the print does not matter.
        */
-      thermalManager.check_timer_autostart(false, true);
+      thermalManager.auto_job_check_timer(false, true);
     #endif
   }
 }
@@ -128,7 +128,7 @@ void GcodeSuite::M190() {
 
   thermalManager.setTargetBed(temp);
 
-  TERN_(PRINTJOB_TIMER_AUTOSTART, thermalManager.check_timer_autostart(true, false));
+  TERN_(PRINTJOB_TIMER_AUTOSTART, thermalManager.auto_job_check_timer(true, false));
 
   ui.set_status_P(thermalManager.isHeatingBed() ? GET_TEXT(MSG_BED_HEATING) : GET_TEXT(MSG_BED_COOLING));
 
diff --git a/Marlin/src/gcode/temp/M141_M191.cpp b/Marlin/src/gcode/temp/M141_M191.cpp
index fc80c5f4cb..17eb71eada 100644
--- a/Marlin/src/gcode/temp/M141_M191.cpp
+++ b/Marlin/src/gcode/temp/M141_M191.cpp
@@ -60,7 +60,7 @@ void GcodeSuite::M141() {
        * temperatures need to be set below mintemp. Order of M140, M104, and M141
        * at the end of the print does not matter.
        */
-      thermalManager.check_timer_autostart(false, true);
+      thermalManager.auto_job_check_timer(false, true);
     #endif
   }
 }
@@ -75,7 +75,7 @@ void GcodeSuite::M191() {
   const bool no_wait_for_cooling = parser.seenval('S');
   if (no_wait_for_cooling || parser.seenval('R')) {
     thermalManager.setTargetChamber(parser.value_celsius());
-    TERN_(PRINTJOB_TIMER_AUTOSTART, thermalManager.check_timer_autostart(true, false));
+    TERN_(PRINTJOB_TIMER_AUTOSTART, thermalManager.auto_job_check_timer(true, false));
   }
   else return;
 
diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp
index d119a72a64..40f8624efb 100644
--- a/Marlin/src/module/temperature.cpp
+++ b/Marlin/src/module/temperature.cpp
@@ -2154,7 +2154,7 @@ void Temperature::disable_all_heaters() {
 
 #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
 
-  bool Temperature::over_autostart_threshold() {
+  bool Temperature::auto_job_over_threshold() {
     #if HAS_HOTEND
       HOTEND_LOOP() if (degTargetHotend(e) > (EXTRUDE_MINTEMP) / 2) return true;
     #endif
@@ -2162,8 +2162,8 @@ void Temperature::disable_all_heaters() {
         || TERN0(HAS_HEATED_CHAMBER, degTargetChamber() > CHAMBER_MINTEMP);
   }
 
-  void Temperature::check_timer_autostart(const bool can_start, const bool can_stop) {
-    if (over_autostart_threshold()) {
+  void Temperature::auto_job_check_timer(const bool can_start, const bool can_stop) {
+    if (auto_job_over_threshold()) {
       if (can_start) startOrResumeJob();
     }
     else if (can_stop) {
diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h
index 57b0fecbcc..4b27fff19d 100644
--- a/Marlin/src/module/temperature.h
+++ b/Marlin/src/module/temperature.h
@@ -731,8 +731,8 @@ class Temperature {
       /**
        * Methods to check if heaters are enabled, indicating an active job
        */
-      static bool over_autostart_threshold();
-      static void check_timer_autostart(const bool can_start, const bool can_stop);
+      static bool auto_job_over_threshold();
+      static void auto_job_check_timer(const bool can_start, const bool can_stop);
     #endif
 
     /**