Browse Source

Merge pull request #4257 from esenapaj/Follow-up-the-PR-#4253-etc

Follow-up the PR #4253 (Runout Sensor without SD Card, Print Timer support in M104), etc
pull/1/head
Scott Lahteine 8 years ago
committed by GitHub
parent
commit
5b87deebb6
  1. 20
      Marlin/Conditionals.h
  2. 5
      Marlin/example_configurations/Felix/DUAL/Configuration.h
  3. 5
      Marlin/example_configurations/K8400/Dual Heads/Configuration.h

20
Marlin/Conditionals.h

@ -846,16 +846,16 @@
/** /**
* MIN_Z_HEIGHT_FOR_HOMING / Z_RAISE_BETWEEN_PROBINGS * MIN_Z_HEIGHT_FOR_HOMING / Z_RAISE_BETWEEN_PROBINGS
*/ */
#ifndef MIN_Z_HEIGHT_FOR_HOMING #ifndef MIN_Z_HEIGHT_FOR_HOMING
#ifndef Z_RAISE_BETWEEN_PROBINGS #ifndef Z_RAISE_BETWEEN_PROBINGS
#define MIN_Z_HEIGHT_FOR_HOMING 0 #define MIN_Z_HEIGHT_FOR_HOMING 0
#else #else
#define MIN_Z_HEIGHT_FOR_HOMING Z_RAISE_BETWEEN_PROBINGS #define MIN_Z_HEIGHT_FOR_HOMING Z_RAISE_BETWEEN_PROBINGS
#endif #endif
#endif #endif
#ifndef Z_RAISE_BETWEEN_PROBINGS #ifndef Z_RAISE_BETWEEN_PROBINGS
#define Z_RAISE_BETWEEN_PROBING MIN_Z_HEIGHT_FOR_HOMING #define Z_RAISE_BETWEEN_PROBING MIN_Z_HEIGHT_FOR_HOMING
#endif #endif
#endif //CONFIGURATION_LCD #endif //CONFIGURATION_LCD
#endif //CONDITIONALS_H #endif //CONDITIONALS_H

5
Marlin/example_configurations/Felix/DUAL/Configuration.h

@ -771,7 +771,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

5
Marlin/example_configurations/K8400/Dual Heads/Configuration.h

@ -790,7 +790,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
// Print job timer // Print job timer
// //
// Enable this option to automatically start and stop the // Enable this option to automatically start and stop the
// print job timer when M104 and M109 commands are received. // print job timer when M104/M109/M190 commands are received.
// M104 (extruder without wait) - high temp = none, low temp = stop timer
// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
// M190 (bed with wait) - high temp = start timer, low temp = none
// //
// In all cases the timer can be started and stopped using // In all cases the timer can be started and stopped using
// the following commands: // the following commands:

Loading…
Cancel
Save