From 5785bbb491c378d945e1133aafa7e33e6fcc5795 Mon Sep 17 00:00:00 2001 From: gege2b Date: Sat, 10 Feb 2018 21:15:41 +0100 Subject: [PATCH] Updated french translation (#9556) --- Marlin/src/lcd/language/language_fr.h | 59 +++++++++++++++++++--- Marlin/src/lcd/language/language_fr_utf8.h | 58 +++++++++++++++++++-- 2 files changed, 107 insertions(+), 10 deletions(-) diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h index 6159002030..ae7e3b5299 100644 --- a/Marlin/src/lcd/language/language_fr.h +++ b/Marlin/src/lcd/language/language_fr.h @@ -32,7 +32,6 @@ #define MAPPER_NON #define NOT_EXTENDED_ISO10646_1_5X7 -#define CHARSIZE 2 #define WELCOME_MSG MACHINE_NAME _UxGT(" prete.") #define MSG_BACK _UxGT("Retour") @@ -76,6 +75,8 @@ #define MSG_MOVE_AXIS _UxGT("Deplacer un axe") #define MSG_BED_LEVELING _UxGT("Regl. Niv. lit") #define MSG_LEVEL_BED _UxGT("Regl. Niv. lit") +#define MSG_LEVEL_CORNERS _UxGT("Niveau coins") +#define MSG_NEXT_CORNER _UxGT("Coin suivant") #define MSG_EDITING_STOPPED _UxGT("Arret edit. maillage") #define MSG_USER_MENU _UxGT("Commandes perso") @@ -94,6 +95,7 @@ #define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP #define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temperature buse") #define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Editer maille") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Editer maille perso") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Reglage fin maille") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Terminer maille") @@ -133,10 +135,33 @@ #define MSG_UBL_STORAGE_SLOT _UxGT("Slot memoire") #define MSG_UBL_LOAD_MESH _UxGT("Charger maille") #define MSG_UBL_SAVE_MESH _UxGT("Sauver maille") +#define MSG_MESH_LOADED _UxGT("Maille %i charg.") +#define MSG_MESH_SAVED _UxGT("Maille %i enreg.") +#define MSG_NO_STORAGE _UxGT("Pas de memoire") #define MSG_UBL_SAVE_ERROR _UxGT("Err: Enreg. UBL") #define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ouvrir UBL") -#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Offset Z arrete") +#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Offset Z stoppe") +#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Pas-a-pas") +#define MSG_LED_CONTROL _UxGT("Control LED") +#define MSG_LEDS_ON _UxGT("Lumieres ON") +#define MSG_LEDS_OFF _UxGT("Lumiere OFF") +#define MSG_LED_PRESETS _UxGT("Preregl. LED.") +#define MSG_SET_LEDS_RED _UxGT("Rouge") +#define MSG_SET_LEDS_ORANGE _UxGT("Orange") +#define MSG_SET_LEDS_YELLOW _UxGT("Jaune") +#define MSG_SET_LEDS_GREEN _UxGT("Vert") +#define MSG_SET_LEDS_BLUE _UxGT("Bleu") +#define MSG_SET_LEDS_INDIGO _UxGT("Indigo") +#define MSG_SET_LEDS_VIOLET _UxGT("Violet") +#define MSG_SET_LEDS_WHITE _UxGT("Blanc") +#define MSG_SET_LEDS_DEFAULT _UxGT("Defaut") +#define MSG_CUSTOM_LEDS _UxGT("Lum. perso.") +#define MSG_INTENSITY_R _UxGT("Intensite rouge") +#define MSG_INTENSITY_G _UxGT("Intensite vert") +#define MSG_INTENSITY_B _UxGT("Intensite bleu") +#define MSG_INTENSITY_W _UxGT("Intensite blanc") +#define MSG_LED_BRIGHTNESS _UxGT("Luminosite") #define MSG_MOVING _UxGT("Deplacement...") #define MSG_FREE_XY _UxGT("Debloquer XY") @@ -152,6 +177,8 @@ #define MSG_NOZZLE _UxGT("Buse") #define MSG_BED _UxGT("Lit") #define MSG_FAN_SPEED _UxGT("Vitesse ventil.") +#define MSG_EXTRA_FAN_SPEED _UxGT("+Vitesse ventil.") + #define MSG_FLOW _UxGT("Flux") #define MSG_CONTROL _UxGT("Controler") #define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") @@ -206,6 +233,8 @@ #define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3") #define MSG_FILAMENT_DIAM _UxGT("Diam. Fil.") +#define MSG_FILAMENT_UNLOAD _UxGT("Decharger mm") +#define MSG_FILAMENT_LOAD _UxGT("Charger mm") #define MSG_ADVANCE_K _UxGT("Advance K") #define MSG_CONTRAST _UxGT("Contraste LCD") #define MSG_STORE_EEPROM _UxGT("Sauver config") @@ -239,9 +268,13 @@ #define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("Ech. UnRet V") #define MSG_AUTORETRACT _UxGT("Retract. Auto.") #define MSG_FILAMENTCHANGE _UxGT("Changer filament") +#define MSG_FILAMENTLOAD _UxGT("Charger fil.") +#define MSG_FILAMENTUNLOAD _UxGT("Decharger fil.") +#define MSG_FILAMENTUNLOAD_ALL _UxGT("Decharger tout") #define MSG_INIT_SDCARD _UxGT("Init. la carte SD") #define MSG_CNG_SDCARD _UxGT("Changer de carte") #define MSG_ZPROBE_OUT _UxGT("Z sonde exte. lit") +#define MSG_SKEW_FACTOR _UxGT("Facteur ecart") #define MSG_BLTOUCH _UxGT("BLTouch") #define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch") #define MSG_BLTOUCH_RESET _UxGT("RaZ BLTouch") @@ -278,8 +311,12 @@ #define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrer Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrer Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrer centre") +#define MSG_DELTA_SETTINGS _UxGT("Reglages Delta") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Calibration Auto") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Hauteur Delta") +#define MSG_DELTA_DIAG_ROD _UxGT("Diagonale") +#define MSG_DELTA_HEIGHT _UxGT("Hauteur") +#define MSG_DELTA_RADIUS _UxGT("Rayon") #define MSG_INFO_MENU _UxGT("Infos imprimante") #define MSG_INFO_PRINTER_MENU _UxGT("Infos imprimante") @@ -318,26 +355,36 @@ #define MSG_DAC_PERCENT _UxGT("Driver %") #define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM sauv.") +#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("IMPR. PAUSE") +#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("CHARGER FIL") +#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("DECHARGER FIL") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPTIONS REPRISE:") +#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Purger encore") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Reprendre impr.") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Buse: ") +#define MSG_ERR_HOMING_FAILED _UxGT("Echec origine") +#define MSG_ERR_PROBING_FAILED _UxGT("Echec sonde") +#define MSG_M600_TOO_COLD _UxGT("M600: Trop froid") #if LCD_HEIGHT >= 4 // Up to 3 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attente Demarrage") #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("du filament") #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("changer") - #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("attente de") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Attente de") #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("decharger filament") - #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("inserer filament") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserer filament") #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("et app. bouton") #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("pour continuer...") #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Presser le bouton...") #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Pr chauffer la buse") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Buse en chauffe") #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Patientez SVP...") - #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("attente de") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attente de") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("chargement filament") - #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("attente impression") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Attente") + #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("Purger filament") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attente impression") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pour reprendre") #else // LCD_HEIGHT < 4 // Up to 2 lines allowed diff --git a/Marlin/src/lcd/language/language_fr_utf8.h b/Marlin/src/lcd/language/language_fr_utf8.h index 0a50055c60..fcbfdf5fad 100644 --- a/Marlin/src/lcd/language/language_fr_utf8.h +++ b/Marlin/src/lcd/language/language_fr_utf8.h @@ -32,6 +32,7 @@ #define MAPPER_C2C3 #define DISPLAY_CHARSET_ISO10646_1 +#define CHARSIZE 2 #define WELCOME_MSG MACHINE_NAME _UxGT(" prête.") #define MSG_BACK _UxGT("Retour") @@ -75,6 +76,8 @@ #define MSG_MOVE_AXIS _UxGT("Déplacer un axe") #define MSG_BED_LEVELING _UxGT("Règl. Niv. lit") #define MSG_LEVEL_BED _UxGT("Règl. Niv. lit") +#define MSG_LEVEL_CORNERS _UxGT("Niveau coins") +#define MSG_NEXT_CORNER _UxGT("Coin suivant") #define MSG_EDITING_STOPPED _UxGT("Arrêt edit. maillage") #define MSG_USER_MENU _UxGT("Commandes perso") @@ -93,6 +96,7 @@ #define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP #define MSG_UBL_SET_HOTEND_TEMP _UxGT("Température buse") #define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Éditer maille") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Editer maille perso") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Réglage fin maille") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Terminer maille") @@ -132,10 +136,33 @@ #define MSG_UBL_STORAGE_SLOT _UxGT("Slot mémoire") #define MSG_UBL_LOAD_MESH _UxGT("Charger maille") #define MSG_UBL_SAVE_MESH _UxGT("Sauver maille") +#define MSG_MESH_LOADED _UxGT("Maille %i charg.") +#define MSG_MESH_SAVED _UxGT("Maille %i enreg.") +#define MSG_NO_STORAGE _UxGT("Pas de mémoire") #define MSG_UBL_SAVE_ERROR _UxGT("Err: Enreg. UBL") #define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ouvrir UBL") #define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Offset Z arrêté") +#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Pas-à-pas") +#define MSG_LED_CONTROL _UxGT("Control LED") +#define MSG_LEDS_ON _UxGT("Lumières ON") +#define MSG_LEDS_OFF _UxGT("Lumière OFF") +#define MSG_LED_PRESETS _UxGT("Preregl. LED.") +#define MSG_SET_LEDS_RED _UxGT("Rouge") +#define MSG_SET_LEDS_ORANGE _UxGT("Orange") +#define MSG_SET_LEDS_YELLOW _UxGT("Jaune") +#define MSG_SET_LEDS_GREEN _UxGT("Vert") +#define MSG_SET_LEDS_BLUE _UxGT("Bleu") +#define MSG_SET_LEDS_INDIGO _UxGT("Indigo") +#define MSG_SET_LEDS_VIOLET _UxGT("Violet") +#define MSG_SET_LEDS_WHITE _UxGT("Blanc") +#define MSG_SET_LEDS_DEFAULT _UxGT("Defaut") +#define MSG_CUSTOM_LEDS _UxGT("Lum. perso.") +#define MSG_INTENSITY_R _UxGT("Intensité rouge") +#define MSG_INTENSITY_G _UxGT("Intensité vert") +#define MSG_INTENSITY_B _UxGT("Intensité bleu") +#define MSG_INTENSITY_W _UxGT("Intensité blanc") +#define MSG_LED_BRIGHTNESS _UxGT("Luminosité") #define MSG_MOVING _UxGT("Déplacement...") #define MSG_FREE_XY _UxGT("Débloquer XY") @@ -151,6 +178,8 @@ #define MSG_NOZZLE _UxGT("Buse") #define MSG_BED _UxGT("Lit") #define MSG_FAN_SPEED _UxGT("Vitesse ventil.") +#define MSG_EXTRA_FAN_SPEED _UxGT("+Vitesse ventil.") + #define MSG_FLOW _UxGT("Flux") #define MSG_CONTROL _UxGT("Contrôler") #define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") @@ -205,6 +234,8 @@ #define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3") #define MSG_FILAMENT_DIAM _UxGT("Diam. Fil.") +#define MSG_FILAMENT_UNLOAD _UxGT("Decharger mm") +#define MSG_FILAMENT_LOAD _UxGT("Charger mm") #define MSG_ADVANCE_K _UxGT("Advance K") #define MSG_CONTRAST _UxGT("Contraste LCD") #define MSG_STORE_EEPROM _UxGT("Sauver config") @@ -235,11 +266,16 @@ #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Ech. UnRet mm") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") +#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("Ech. UnRet V") #define MSG_AUTORETRACT _UxGT("Rétract. Auto.") #define MSG_FILAMENTCHANGE _UxGT("Changer filament") +#define MSG_FILAMENTLOAD _UxGT("Charger fil.") +#define MSG_FILAMENTUNLOAD _UxGT("Decharger fil.") +#define MSG_FILAMENTUNLOAD_ALL _UxGT("Decharger tout") #define MSG_INIT_SDCARD _UxGT("Init. la carte SD") #define MSG_CNG_SDCARD _UxGT("Changer de carte") #define MSG_ZPROBE_OUT _UxGT("Z sonde extè. lit") +#define MSG_SKEW_FACTOR _UxGT("Facteur ecart") #define MSG_BLTOUCH _UxGT("BLTouch") #define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch") #define MSG_BLTOUCH_RESET _UxGT("RaZ BLTouch") @@ -276,8 +312,12 @@ #define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrer Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrer Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrer centre") +#define MSG_DELTA_SETTINGS _UxGT("Réglages Delta") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Calibration Auto") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Hauteur Delta") +#define MSG_DELTA_DIAG_ROD _UxGT("Diagonale") +#define MSG_DELTA_HEIGHT _UxGT("Hauteur") +#define MSG_DELTA_RADIUS _UxGT("Rayon") #define MSG_INFO_MENU _UxGT("Infos imprimante") #define MSG_INFO_PRINTER_MENU _UxGT("Infos imprimante") @@ -316,26 +356,36 @@ #define MSG_DAC_PERCENT _UxGT("Driver %") #define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM sauv.") +#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("IMPR. PAUSE") +#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("CHARGER FIL") +#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("DECHARGER FIL") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPTIONS REPRISE:") +#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Purger encore") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Reprendre impr.") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Buse: ") +#define MSG_ERR_HOMING_FAILED _UxGT("Echec origine") +#define MSG_ERR_PROBING_FAILED _UxGT("Echec sonde") +#define MSG_M600_TOO_COLD _UxGT("M600: Trop froid") #if LCD_HEIGHT >= 4 // Up to 3 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attente Démarrage") #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("du filament") #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("changer") - #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("attente de") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Attente de") #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("décharger filament") - #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("insérer filament") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insérer filament") #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("et app. bouton") #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("pour continuer...") #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Presser le bouton...") #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Pr chauffer la buse") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Buse en chauffe") #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Patientez SVP...") - #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("attente de") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attente de") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("chargement filament") - #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("attente impression") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Attente") + #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("Purger filament") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attente impression") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pour reprendre") #else // LCD_HEIGHT < 4 // Up to 2 lines allowed