Browse Source

Basic support for Azteeg_X5_GT (#8139)

* Basic support for Azteeg_X5_GT

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>

* Add fan pins for AZTEEG X5 GT

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>

* Fix endstop pins

* Add servo0 pin
pull/1/head
Alexey Shvetsov 7 years ago
committed by Roxy-3D
parent
commit
577659cacf
  1. 1723
      Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
  2. 1451
      Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
  3. 1
      Marlin/src/core/boards.h
  4. 2
      Marlin/src/pins/pins.h
  5. 117
      Marlin/src/pins/pins_AZTEEG_X5_GT.h

1723
Marlin/src/config/examples/Azteeg/X5GT/Configuration.h

File diff suppressed because it is too large

1451
Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h

File diff suppressed because it is too large

1
Marlin/src/core/boards.h

@ -131,6 +131,7 @@
#define BOARD_RAMPS_14_RE_ARM_SF 1748 // Re-ARM with RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
#define BOARD_MKS_SBASE 1750 // MKS-Sbase (Power outputs: Hotend0, Hotend1, Bed, Fan)
#define BOARD_AZSMZ_MINI 1751 // AZSMZ Mini
#define BOARD_AZTEEG_X5_GT 1752 // Azteeg X5 GT (Power outputs: Hotend0, Hotend1, Bed, Fan)
#define BOARD_STM32F1R 1800 // STM3R Libmaple based STM32F1 controller

2
Marlin/src/pins/pins.h

@ -306,6 +306,8 @@
#include "pins_MKS_SBASE.h"
#elif MB(AZSMZ_MINI)
#include "pins_AZSMZ_MINI.h"
#elif MB(AZTEEG_X5_GT)
#include "pins_AZTEEG_X5_GT.h"
#else
#error "Unknown MOTHERBOARD value set in Configuration.h"
#endif

117
Marlin/src/pins/pins_AZTEEG_X5_GT.h

@ -0,0 +1,117 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* MKS SBASE pin assignments
*/
#ifndef TARGET_LPC1768
#error "Oops! Make sure you have LPC1768 selected."
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "Azteeg X5 GT"
#define DEFAULT_WEBSITE_URL "https://www.panucatt.com/azteeg_X5_GT_reprap_3d_printer_controller_p/ax5gt.htm"
#endif
#define LARGE_FLASH true
//
// Limit Switches
//
#define X_MIN_PIN P1_24
#define X_MAX_PIN P1_27
#define Y_MIN_PIN P1_25
#define Y_MAX_PIN P1_28
#define Z_MIN_PIN P1_26
#define Z_MAX_PIN P1_29
//
// Steppers
//
#define X_STEP_PIN P2_1
#define X_DIR_PIN P0_11
#define X_ENABLE_PIN P0_10
#define Y_STEP_PIN P2_2
#define Y_DIR_PIN P0_20
#define Y_ENABLE_PIN P0_19
#define Z_STEP_PIN P2_3
#define Z_DIR_PIN P0_22
#define Z_ENABLE_PIN P0_21
#define E0_STEP_PIN P2_0
#define E0_DIR_PIN P0_5
#define E0_ENABLE_PIN P0_4
#define E1_STEP_PIN P2_8
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
//
// Temperature Sensors
// 3.3V max when defined as an analog input
//
#define TEMP_BED_PIN 0 // A0 (TH1)
#define TEMP_0_PIN 1 // A1 (TH2)
#define TEMP_1_PIN 2 // A2 (TH3)
//
// Heaters / Fans
//
#define HEATER_BED_PIN P2_7
#define HEATER_0_PIN P2_4
#define HEATER_1_PIN P2_5
#define FAN_PIN P0_26
#define FAN1_PIN P1_22
//
// Display
//
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER_PIN P1_30
#define DOGLCD_A0 P2_6
#define DOGLCD_CS P0_16
#define BTN_EN1 P3_25
#define BTN_EN2 P3_26
#define BTN_ENC P2_11
#define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
#define KILL_PIN -1
#define STAT_LED_RED_PIN P0_26
#define STAT_LED_BLUE_PIN P1_21
#endif
//
// Servo
//
#define SERVO0_PIN P1_23
Loading…
Cancel
Save