Combine Travis tests to shorten required time

8 years ago · 570722a0fe
1 changed files with 32 additions and 112 deletions
--- a/.travis.yml
+++ b/.travis.yml
@ -71,48 +71,15 @@ script:
  #
  - build_marlin
  #
-  # Test heated bed temperature sensor
-  #
-  - opt_set TEMP_SENSOR_BED 1
-  - build_marlin
-  #
-  # Test 2 extruders on basic RAMPS 1.4
+  # Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4
+  #  plus a "Fix Mounted" Probe with Safe Homing
  #
  - opt_set MOTHERBOARD BOARD_RAMPS_14_EEB
  - opt_set EXTRUDERS 2
+  - opt_set TEMP_SENSOR_0 -2
  - opt_set TEMP_SENSOR_1 1
-  - build_marlin
-  #
-  # Test 5 extruders on AZTEEG_X3_PRO (can use any board with >=5 extruders defined)
-  # Include a test for LIN_ADVANCE here also
-  #
-  - opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
-  - opt_set EXTRUDERS 5
-  - opt_set TEMP_SENSOR_1 1
-  - opt_set TEMP_SENSOR_2 5
-  - opt_set TEMP_SENSOR_3 20
-  - opt_set TEMP_SENSOR_4 999
-  - opt_set TEMP_SENSOR_BED 1
-  - opt_enable_adv LIN_ADVANCE
-  - build_marlin
-  #
-  # Test PIDTEMPBED
-  #
-  - restore_configs
  - opt_set TEMP_SENSOR_BED 1
-  - opt_enable PIDTEMPBED
-  - build_marlin
-  #
-  # Test MAX6675
-  #
-  - restore_configs
-  - opt_set TEMP_SENSOR_0 -2
-  - build_marlin
-  #
-  # Test a "Fix Mounted" Probe along with Safe Homing
-  #
-  - restore_configs
-  - opt_enable FIX_MOUNTED_PROBE Z_SAFE_HOMING
+  - opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING
  - build_marlin
  #
  # ...with AUTO_BED_LEVELING_LINEAR, Z_MIN_PROBE_REPEATABILITY_TEST, and DEBUG_LEVELING_FEATURE
@ -151,17 +118,27 @@ script:
  - opt_enable MESH_BED_LEVELING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER
  - build_marlin
  #
-  # Test PROBE_MANUALLY feature, with LCD support
+  # Test PROBE_MANUALLY feature, with LCD support,
+  #      EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER,
+  #      INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT
  #
  - restore_configs
+  - opt_set MOTHERBOARD BOARD_MINIRAMBO
  - opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR LCD_BED_LEVELING ULTIMAKERCONTROLLER
+  - opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
  - build_marlin
  #
-  # Test EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER,
-  #   INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT
+  # Test 5 extruders on AZTEEG_X3_PRO (can use any board with >=5 extruders defined)
+  # Include a test for LIN_ADVANCE here also
  #
-  - restore_configs
-  - opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
+  - opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
+  - opt_set EXTRUDERS 5
+  - opt_set TEMP_SENSOR_1 1
+  - opt_set TEMP_SENSOR_2 5
+  - opt_set TEMP_SENSOR_3 20
+  - opt_set TEMP_SENSOR_4 999
+  - opt_set TEMP_SENSOR_BED 1
+  - opt_enable_adv LIN_ADVANCE
  - build_marlin
  #
  # Mixing Extruder with 5 steppers
@ -202,34 +179,19 @@ script:
  - build_marlin
  #
  # Test MINIRAMBO for PWM_MOTOR_CURRENT
+  #      ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR,
+  #      PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632,
+  #      Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
+  #      FILAMENT_CHANGE_FEATURE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU,
  #
  - restore_configs
-  - opt_set MOTHERBOARD BOARD_MINIRAMBO
-  - build_marlin
-  #
-  # Test FILAMENT_CHANGE_FEATURE, PARK_HEAD_ON_PAUSE, and LCD_INFO_MENU
-  #
-  - restore_configs
-  - opt_enable ULTIMAKERCONTROLLER
-  - opt_enable_adv FILAMENT_CHANGE_FEATURE PARK_HEAD_ON_PAUSE LCD_INFO_MENU
-  - build_marlin
-  #
-  # Enable filament sensor
-  #
-  - restore_configs
-  - opt_enable FILAMENT_WIDTH_SENSOR
-  - build_marlin
-  #
-  # Enable filament sensor with LCD display
-  #
-  - opt_enable ULTIMAKERCONTROLLER FILAMENT_LCD_DISPLAY
-  - build_marlin
-  #
-  # Enable BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS, and I2C_SLAVE_ADDRESS
-  #
-  - restore_configs
-  - opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
+  - opt_enable ULTIMAKERCONTROLLER FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR SDSUPPORT
+  - opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632
+  - opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
  - opt_set_adv I2C_SLAVE_ADDRESS 63
+  - opt_enable_adv FILAMENT_CHANGE_FEATURE PARK_HEAD_ON_PAUSE LCD_INFO_MENU
+  - pins_set RAMPS X_MAX_PIN -1
+  - opt_set_adv Z2_MAX_PIN 2
  - build_marlin
  #
  # Enable COREXY
@ -244,34 +206,8 @@ script:
  - opt_enable COREYX
  - build_marlin
  #
-  # Enable Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS
  #
-  - restore_configs
-  - opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
-  - pins_set RAMPS X_MAX_PIN -1
-  - opt_set_adv Z2_MAX_PIN 2
-  - build_marlin
-  #
-  # Test PRINTCOUNTER
-  #
-  - restore_configs
-  - opt_enable PRINTCOUNTER
-  - build_marlin
-  #
-  # Test NOZZLE_PARK_FEATURE
-  #
-  - restore_configs
-  - opt_enable NOZZLE_PARK_FEATURE
-  - build_marlin
-  #
-  # Test NOZZLE_CLEAN_FEATURE
-  #
-  - restore_configs
-  - opt_enable NOZZLE_CLEAN_FEATURE
-  - build_marlin
-  #
-  #
-  ######## STANDARD LCD/PANELS ##############
+  ######## Other Standard LCD/Panels ##############
  #
  # ULTRA_LCD
  #
@ -285,18 +221,6 @@ script:
  - opt_enable DOGLCD
  - build_marlin
  #
-  # ULTIMAKERCONTROLLER
-  #
-  - restore_configs
-  - opt_enable ULTIMAKERCONTROLLER
-  - build_marlin
-  #
-  # PCA9632
-  #
-  - restore_configs
-  - opt_enable PCA9632
-  - build_marlin
-  #
  # MAKRPANEL
  # Needs to use Melzi and Sanguino hardware
  #
@ -310,15 +234,11 @@ script:
  - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING
  - build_marlin
  #
-  # G3D_PANEL
+  # G3D_PANEL with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
  #
  - restore_configs
  - opt_enable G3D_PANEL SDSUPPORT
-  - build_marlin
-  #
-  # Add SDCARD_SORT_ALPHA, test G3D_PANEL again
-  #
-  - opt_enable_adv SDCARD_SORT_ALPHA
+  - opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING
  - opt_set_adv SDSORT_GCODE true
  - opt_set_adv SDSORT_USES_RAM true
  - opt_set_adv SDSORT_USES_STACK true