diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index daaf321dcb..37a25bc80b 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index daaf321dcb..37a25bc80b 100644
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 435378bb17..b4fd8ad1fe 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 4
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index 8a9d8c88fa..5dec975990 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index d0daf81ab5..3b6382d1ac 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
index af76259d11..653c6e50f1 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index 94043ed98b..48bb8ec033 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 9d9fdad606..a723014a3f 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index 94043ed98b..48bb8ec033 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index e96d1d777a..53f397a982 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index 0236f542c2..8143b07e26 100644
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index 4901703a10..e8b276b4c7 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 3
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 36edbbf07e..14b7240e36 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index c89aba5b5e..b3b5cdfcd0 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 1
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index 1779d4e7a8..7483d7db25 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 4026ec4e5e..968140435b 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index a04f3148c4..19445dde3b 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
index a80dec718d..b8c2d28fab 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index 3c5bda64e2..7adceb2910 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 3
 #define Y_HOME_BUMP_MM 3
 #define Z_HOME_BUMP_MM 3
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index bc5d2fcdb0..feb2fa149f 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -334,7 +337,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index c07b3627fb..878f85b62b 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index cae20c8967..3c6744efd3 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index 64c1393622..d3d6d4b7a7 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -135,6 +135,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -358,7 +361,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
index 86ae10e850..3c72ae8e15 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 10
 #define Y_HOME_BUMP_MM 10
 #define Z_HOME_BUMP_MM 3
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 0e53dd57fa..f234bbe68a 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 5b2e5d5bf1..a8306a792e 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index 5b2e5d5bf1..a8306a792e 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index 5b2e5d5bf1..a8306a792e 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
index a973ff0c2c..ab6ccbe6ad 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
@@ -127,6 +127,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -350,7 +353,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index 5f5c340692..bd9cdebfbb 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 2
 #define Y_HOME_BUMP_MM 2
 #define Z_HOME_BUMP_MM 2 // deltas need the same for all three axes
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index fca8d4b20a..af57493a66 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index 3a83b379cf..d9ea5c0272 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
index b7c39423d1..b18aae475c 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 1
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index 24ebd12249..b9ff9fc843 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -122,6 +122,9 @@
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
+// Show extra position information in M114
+//#define M114_DETAIL
+
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -345,7 +348,7 @@
 
 // @section homing
 
-//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
diff --git a/Marlin/src/gcode/host/M114.cpp b/Marlin/src/gcode/host/M114.cpp
index aa968ed3d2..a9aca1d8be 100644
--- a/Marlin/src/gcode/host/M114.cpp
+++ b/Marlin/src/gcode/host/M114.cpp
@@ -26,7 +26,7 @@
 #include "../../module/motion.h"
 #include "../../module/stepper.h"
 
-#ifdef M114_DETAIL
+#if ENABLED(M114_DETAIL)
 
   void report_xyze(const float pos[XYZE], const uint8_t n = 4, const uint8_t precision = 3) {
     char str[12];
@@ -113,7 +113,7 @@
  */
 void GcodeSuite::M114() {
 
-  #ifdef M114_DETAIL
+  #if ENABLED(M114_DETAIL)
     if (parser.seen('D')) {
       report_current_position_detail();
       return;