diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index f5a36e6b9c..cb46c530e4 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -533,9 +533,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif
 
 
diff --git a/Marlin/configurator/config/Configuration.h b/Marlin/configurator/config/Configuration.h
index 71cbdebaec..78c40b2e9b 100644
--- a/Marlin/configurator/config/Configuration.h
+++ b/Marlin/configurator/config/Configuration.h
@@ -570,9 +570,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif
 
 // @section extras
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index e9801813f8..17631860c8 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -512,9 +512,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif
 
 
diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h
index e9e4623cab..e72277417c 100644
--- a/Marlin/example_configurations/Felix/Configuration_DUAL.h
+++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h
@@ -512,9 +512,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif
 
 
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index c5b0243d57..1e726a0b76 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -540,9 +540,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif
 
 
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index bc0f3e5dfe..edb026b7af 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -544,9 +544,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif
 
 
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index d42bebe3af..79b3ded980 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -570,9 +570,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 //#define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif
 
 
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 481b591255..6362bb9971 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -537,9 +537,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif
 
 
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 0baf7de1c0..9a41656054 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -553,9 +553,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif
 
 
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 9f5f89ca5a..ca77c39848 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -555,9 +555,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif
 
 
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index f6561b3af8..341ac60348 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -535,9 +535,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif
 
 
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 17928b536b..da82ccd636 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -542,9 +542,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Custom M code points
 #define CUSTOM_M_CODES
 #ifdef CUSTOM_M_CODES
-  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
-  #define Z_PROBE_OFFSET_RANGE_MIN -15
-  #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #ifdef ENABLE_AUTO_BED_LEVELING
+    #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+    #define Z_PROBE_OFFSET_RANGE_MIN -15
+    #define Z_PROBE_OFFSET_RANGE_MAX -5
+  #endif
 #endif