From 512f2a313600b3f0e3c48dfcc4ea9972e8b196a9 Mon Sep 17 00:00:00 2001 From: cocktailyogi Date: Mon, 23 Jun 2014 17:09:57 +0200 Subject: [PATCH] restore Branch from Backup sorry for that --- Marlin/Configuration.h | 8 +- Marlin/ConfigurationStore.cpp | 34 +- Marlin/Marlin.h | 7 + Marlin/Marlin_main.cpp | 368 +- .../SCARA/Configuration.h | 743 ++++ .../SCARA/Configuration_adv.h | 507 +++ Marlin/thermistortables.h | 75 - Marlin/ultralcd.cpp | 3254 +++++++++-------- README.md | 11 +- 9 files changed, 3285 insertions(+), 1722 deletions(-) create mode 100644 Marlin/example_configurations/SCARA/Configuration.h create mode 100644 Marlin/example_configurations/SCARA/Configuration_adv.h diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 66bf69052d..2d81336cb4 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -12,6 +12,13 @@ // example_configurations/delta directory. // +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a Delta printer replace the configuration files with the files in the +// example_configurations/SCARA directory. +// + // User-specified version info of this build to display in [Pronterface, etc] terminal window during // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this // build by the user have been successfully uploaded into firmware. @@ -132,7 +139,6 @@ // 1010 is Pt1000 with 1k pullup (non standard) // 147 is Pt100 with 4k7 pullup // 110 is Pt100 with 1k pullup (non standard) -// 70 is 500C thermistor for Pico hot end #define TEMP_SENSOR_0 -1 #define TEMP_SENSOR_1 -1 diff --git a/Marlin/ConfigurationStore.cpp b/Marlin/ConfigurationStore.cpp index 074ef6ae37..7bbfede752 100644 --- a/Marlin/ConfigurationStore.cpp +++ b/Marlin/ConfigurationStore.cpp @@ -37,10 +37,15 @@ void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size) // the default values are used whenever there is a change to the data, to prevent // wrong data being written to the variables. // ALSO: always make sure the variables in the Store and retrieve sections are in the same order. -#ifdef DELTA -#define EEPROM_VERSION "V11" -#else + #define EEPROM_VERSION "V10" +#ifdef DELTA + #undef EEPROM_VERSION + #define EEPROM_VERSION "V11" +#endif +#ifdef SCARA + #undef EEPROM_VERSION + #define EEPROM_VERSION "V12" #endif #ifdef EEPROM_SETTINGS @@ -49,7 +54,7 @@ void Config_StoreSettings() char ver[4]= "000"; int i=EEPROM_OFFSET; EEPROM_WRITE_VAR(i,ver); // invalidate data first - EEPROM_WRITE_VAR(i,axis_steps_per_unit); + EEPROM_WRITE_VAR(i,axis_steps_per_unit); EEPROM_WRITE_VAR(i,max_feedrate); EEPROM_WRITE_VAR(i,max_acceleration_units_per_sq_second); EEPROM_WRITE_VAR(i,acceleration); @@ -93,6 +98,9 @@ void Config_StoreSettings() int lcd_contrast = 32; #endif EEPROM_WRITE_VAR(i,lcd_contrast); + #ifdef SCARA + EEPROM_WRITE_VAR(i,axis_scaling); // Add scaling for SCARA + #endif char ver2[4]=EEPROM_VERSION; i=EEPROM_OFFSET; EEPROM_WRITE_VAR(i,ver2); // validate data @@ -115,6 +123,16 @@ void Config_PrintSettings() SERIAL_ECHOLN(""); SERIAL_ECHO_START; +#ifdef SCARA +SERIAL_ECHOLNPGM("Scaling factors:"); + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" M365 X",axis_scaling[0]); + SERIAL_ECHOPAIR(" Y",axis_scaling[1]); + SERIAL_ECHOPAIR(" Z",axis_scaling[2]); + SERIAL_ECHOLN(""); + + SERIAL_ECHO_START; +#endif SERIAL_ECHOLNPGM("Maximum feedrates (mm/s):"); SERIAL_ECHO_START; SERIAL_ECHOPAIR(" M203 X",max_feedrate[0]); @@ -196,7 +214,7 @@ void Config_RetrieveSettings() if (strncmp(ver,stored_ver,3) == 0) { // version number match - EEPROM_READ_VAR(i,axis_steps_per_unit); + EEPROM_READ_VAR(i,axis_steps_per_unit); EEPROM_READ_VAR(i,max_feedrate); EEPROM_READ_VAR(i,max_acceleration_units_per_sq_second); @@ -240,6 +258,9 @@ void Config_RetrieveSettings() int lcd_contrast; #endif EEPROM_READ_VAR(i,lcd_contrast); + #ifdef SCARA + EEPROM_READ_VAR(i,axis_scaling); + #endif // Call updatePID (similar to when we have processed M301) updatePID(); @@ -266,6 +287,9 @@ void Config_ResetDefault() axis_steps_per_unit[i]=tmp1[i]; max_feedrate[i]=tmp2[i]; max_acceleration_units_per_sq_second[i]=tmp3[i]; + #ifdef SCARA + axis_scaling[i]=1; + #endif } // steps per sq second need to be updated to agree with the units per sq second diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index e7282092e5..989110f5fe 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -178,6 +178,10 @@ void get_coordinates(); void calculate_delta(float cartesian[3]); extern float delta[3]; #endif +#ifdef SCARA +void calculate_delta(float cartesian[3]); +void calculate_SCARA_forward_Transform(float f_scara[3]); +#endif void prepare_move(); void kill(); void Stop(); @@ -215,6 +219,9 @@ extern float delta_diagonal_rod; extern float delta_segments_per_second; void recalc_delta_settings(float radius, float diagonal_rod); #endif +#ifdef SCARA +extern float axis_scaling[3]; // Build size scaling +#endif extern float min_pos[3]; extern float max_pos[3]; extern bool axis_known_position[3]; diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index c4afca7f68..9164808cd1 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -170,6 +170,16 @@ // M908 - Control digital trimpot directly. // M350 - Set microstepping mode. // M351 - Toggle MS1 MS2 pins directly. + +// ************ SCARA Specific - This can change to suit future G-code regulations +// M360 - SCARA calibration: Move to cal-position ThetaA (0 deg calibration) +// M361 - SCARA calibration: Move to cal-position ThetaB (90 deg calibration - steps per degree) +// M362 - SCARA calibration: Move to cal-position PsiA (0 deg calibration) +// M363 - SCARA calibration: Move to cal-position PsiB (90 deg calibration - steps per degree) +// M364 - SCARA calibration: Move to cal-position PSIC (90 deg to Theta calibration position) +// M365 - SCARA calibration: Scaling factor, X, Y, Z axis +//************* SCARA End *************** + // M928 - Start SD logging (M928 filename.g) - ended by M29 // M999 - Restart after being stopped by error @@ -212,6 +222,7 @@ float add_homeing[3]={0,0,0}; #ifdef DELTA float endstop_adj[3]={0,0,0}; #endif + float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS }; float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS }; bool axis_known_position[3] = {false, false, false}; @@ -274,13 +285,18 @@ int EtoPPressure=0; float delta_diagonal_rod= DELTA_DIAGONAL_ROD; float delta_diagonal_rod_2= sq(delta_diagonal_rod); float delta_segments_per_second= DELTA_SEGMENTS_PER_SECOND; -#endif +#endif + +#ifdef SCARA // Build size scaling +float axis_scaling[3]={1,1,1}; // Build size scaling, default to 1 +#endif //=========================================================================== //=============================Private Variables============================= //=========================================================================== const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'}; static float destination[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0}; +static float delta[3] = {0.0, 0.0, 0.0}; static float offset[3] = {0.0, 0.0, 0.0}; static bool home_all_axis = true; static float feedrate = 1500.0, next_feedrate, saved_feedrate; @@ -850,9 +866,59 @@ static void axis_is_at_home(int axis) { } } #endif +#ifdef SCARA + float homeposition[3]; + char i; + + if (axis < 2) + { + + for (i=0; i<3; i++) + { + homeposition[i] = base_home_pos(i); + } + // SERIAL_ECHOPGM("homeposition[x]= "); SERIAL_ECHO(homeposition[0]); + // SERIAL_ECHOPGM("homeposition[y]= "); SERIAL_ECHOLN(homeposition[1]); + // Works out real Homeposition angles using inverse kinematics, + // and calculates homing offset using forward kinematics + calculate_delta(homeposition); + + // SERIAL_ECHOPGM("base Theta= "); SERIAL_ECHO(delta[X_AXIS]); + // SERIAL_ECHOPGM(" base Psi+Theta="); SERIAL_ECHOLN(delta[Y_AXIS]); + + for (i=0; i<2; i++) + { + delta[i] -= add_homeing[i]; + } + + // SERIAL_ECHOPGM("addhome X="); SERIAL_ECHO(add_homeing[X_AXIS]); + // SERIAL_ECHOPGM(" addhome Y="); SERIAL_ECHO(add_homeing[Y_AXIS]); + // SERIAL_ECHOPGM(" addhome Theta="); SERIAL_ECHO(delta[X_AXIS]); + // SERIAL_ECHOPGM(" addhome Psi+Theta="); SERIAL_ECHOLN(delta[Y_AXIS]); + + calculate_SCARA_forward_Transform(delta); + + // SERIAL_ECHOPGM("Delta X="); SERIAL_ECHO(delta[X_AXIS]); + // SERIAL_ECHOPGM(" Delta Y="); SERIAL_ECHOLN(delta[Y_AXIS]); + + current_position[axis] = delta[axis]; + + // SCARA home positions are based on configuration since the actual limits are determined by the + // inverse kinematic transform. + min_pos[axis] = base_min_pos(axis); // + (delta[axis] - base_home_pos(axis)); + max_pos[axis] = base_max_pos(axis); // + (delta[axis] - base_home_pos(axis)); + } + else + { + current_position[axis] = base_home_pos(axis) + add_homeing[axis]; + min_pos[axis] = base_min_pos(axis) + add_homeing[axis]; + max_pos[axis] = base_max_pos(axis) + add_homeing[axis]; + } +#else current_position[axis] = base_home_pos(axis) + add_homeing[axis]; min_pos[axis] = base_min_pos(axis) + add_homeing[axis]; max_pos[axis] = base_max_pos(axis) + add_homeing[axis]; +#endif } #ifdef ENABLE_AUTO_BED_LEVELING @@ -1111,6 +1177,7 @@ static void homeaxis(int axis) { } } #define HOMEAXIS(LETTER) homeaxis(LETTER##_AXIS) + void refresh_cmd_timeout(void) { previous_millis_cmd = millis(); @@ -1184,6 +1251,7 @@ void process_commands() return; } break; +#ifdef SCARA //disable arc support case 2: // G2 - CW ARC if(Stopped == false) { get_arc_coordinates(); @@ -1198,6 +1266,7 @@ void process_commands() return; } break; +#endif case 4: // G4 dwell LCD_MESSAGEPGM(MSG_DWELL); codenum = 0; @@ -1267,12 +1336,12 @@ void process_commands() HOMEAXIS(Z); calculate_delta(current_position); - plan_set_position(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]); - + plan_set_position(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]); + #else // NOT DELTA home_all_axis = !((code_seen(axis_codes[X_AXIS])) || (code_seen(axis_codes[Y_AXIS])) || (code_seen(axis_codes[Z_AXIS]))); - + #if Z_HOME_DIR > 0 // If homing away from BED do Z first if((home_all_axis) || (code_seen(axis_codes[Z_AXIS]))) { HOMEAXIS(Z); @@ -1316,7 +1385,9 @@ void process_commands() current_position[X_AXIS] = destination[X_AXIS]; current_position[Y_AXIS] = destination[Y_AXIS]; + #ifndef SCARA current_position[Z_AXIS] = destination[Z_AXIS]; + #endif } #endif @@ -1346,13 +1417,21 @@ void process_commands() if(code_seen(axis_codes[X_AXIS])) { if(code_value_long() != 0) { - current_position[X_AXIS]=code_value()+add_homeing[0]; + #ifdef SCARA + current_position[X_AXIS]=code_value(); + #else + current_position[X_AXIS]=code_value()+add_homeing[0]; + #endif } } if(code_seen(axis_codes[Y_AXIS])) { if(code_value_long() != 0) { - current_position[Y_AXIS]=code_value()+add_homeing[1]; + #ifdef SCARA + current_position[Y_AXIS]=code_value(); + #else + current_position[Y_AXIS]=code_value()+add_homeing[1]; + #endif } } @@ -1427,6 +1506,11 @@ void process_commands() plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); #endif // else DELTA +#ifdef SCARA + calculate_delta(current_position); + plan_set_position(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]); +#endif SCARA + #ifdef ENDSTOPS_ONLY_FOR_HOMING enable_endstops(false); #endif @@ -1623,8 +1707,17 @@ void process_commands() plan_set_e_position(current_position[E_AXIS]); } else { - current_position[i] = code_value()+add_homeing[i]; - plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); +#ifdef SCARA + if (i == X_AXIS || i == Y_AXIS) { + current_position[i] = code_value(); + } + else { + current_position[i] = code_value()+add_homeing[i]; + } +#else + current_position[i] = code_value()+add_homeing[i]; +#endif + plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); } } } @@ -2214,6 +2307,26 @@ void process_commands() SERIAL_PROTOCOL(float(st_get_position(Z_AXIS))/axis_steps_per_unit[Z_AXIS]); SERIAL_PROTOCOLLN(""); +#ifdef SCARA + SERIAL_PROTOCOLPGM("SCARA Theta:"); + SERIAL_PROTOCOL(delta[X_AXIS]); + SERIAL_PROTOCOLPGM(" Psi+Theta:"); + SERIAL_PROTOCOL(delta[Y_AXIS]); + SERIAL_PROTOCOLLN(""); + + SERIAL_PROTOCOLPGM("SCARA Cal - Theta:"); + SERIAL_PROTOCOL(delta[X_AXIS]+add_homeing[0]); + SERIAL_PROTOCOLPGM(" Psi+Theta (90):"); + SERIAL_PROTOCOL(delta[Y_AXIS]-delta[X_AXIS]-90+add_homeing[1]); + SERIAL_PROTOCOLLN(""); + + SERIAL_PROTOCOLPGM("SCARA step Cal - Theta:"); + SERIAL_PROTOCOL(delta[X_AXIS]/90*axis_steps_per_unit[X_AXIS]); + SERIAL_PROTOCOLPGM(" Psi+Theta:"); + SERIAL_PROTOCOL((delta[Y_AXIS]-delta[X_AXIS])/90*axis_steps_per_unit[Y_AXIS]); + SERIAL_PROTOCOLLN(""); + SERIAL_PROTOCOLLN(""); +#endif break; case 120: // M120 enable_endstops(false) ; @@ -2335,6 +2448,16 @@ void process_commands() { if(code_seen(axis_codes[i])) add_homeing[i] = code_value(); } + #ifdef SCARA + if(code_seen('T')) // Theta + { + add_homeing[0] = code_value() ; + } + if(code_seen('P')) // Psi + { + add_homeing[1] = code_value() ; + } + #endif break; #ifdef DELTA case 665: // M665 set delta configurations L R S @@ -2693,6 +2816,105 @@ void process_commands() PID_autotune(temp, e, c); } break; + #ifdef SCARA + case 360: // M360 SCARA Theta pos1 + SERIAL_ECHOLN(" Cal: Theta 0 "); + //SoftEndsEnabled = false; // Ignore soft endstops during calibration + //SERIAL_ECHOLN(" Soft endstops disabled "); + if(Stopped == false) { + //get_coordinates(); // For X Y Z E F + delta[0] = 0; + delta[1] = 120; + calculate_SCARA_forward_Transform(delta); + destination[0] = delta[0]/axis_scaling[X_AXIS]; + destination[1] = delta[1]/axis_scaling[Y_AXIS]; + + prepare_move(); + //ClearToSend(); + return; + } + break; + + case 361: // SCARA Theta pos2 + SERIAL_ECHOLN(" Cal: Theta 90 "); + //SoftEndsEnabled = false; // Ignore soft endstops during calibration + //SERIAL_ECHOLN(" Soft endstops disabled "); + if(Stopped == false) { + //get_coordinates(); // For X Y Z E F + delta[0] = 90; + delta[1] = 130; + calculate_SCARA_forward_Transform(delta); + destination[0] = delta[0]/axis_scaling[X_AXIS]; + destination[1] = delta[1]/axis_scaling[Y_AXIS]; + + prepare_move(); + //ClearToSend(); + return; + } + break; + case 362: // SCARA Psi pos1 + SERIAL_ECHOLN(" Cal: Psi 0 "); + //SoftEndsEnabled = false; // Ignore soft endstops during calibration + //SERIAL_ECHOLN(" Soft endstops disabled "); + if(Stopped == false) { + //get_coordinates(); // For X Y Z E F + delta[0] = 60; + delta[1] = 180; + calculate_SCARA_forward_Transform(delta); + destination[0] = delta[0]/axis_scaling[X_AXIS]; + destination[1] = delta[1]/axis_scaling[Y_AXIS]; + + prepare_move(); + //ClearToSend(); + return; + } + break; + case 363: // SCARA Psi pos2 + SERIAL_ECHOLN(" Cal: Psi 90 "); + //SoftEndsEnabled = false; // Ignore soft endstops during calibration + //SERIAL_ECHOLN(" Soft endstops disabled "); + if(Stopped == false) { + //get_coordinates(); // For X Y Z E F + delta[0] = 50; + delta[1] = 90; + calculate_SCARA_forward_Transform(delta); + destination[0] = delta[0]/axis_scaling[X_AXIS]; + destination[1] = delta[1]/axis_scaling[Y_AXIS]; + + prepare_move(); + //ClearToSend(); + return; + } + break; + case 364: // SCARA Psi pos3 (90 deg to Theta) + SERIAL_ECHOLN(" Cal: Theta-Psi 90 "); + // SoftEndsEnabled = false; // Ignore soft endstops during calibration + //SERIAL_ECHOLN(" Soft endstops disabled "); + if(Stopped == false) { + //get_coordinates(); // For X Y Z E F + delta[0] = 45; + delta[1] = 135; + calculate_SCARA_forward_Transform(delta); + destination[0] = delta[0]/axis_scaling[X_AXIS]; + destination[1] = delta[1]/axis_scaling[Y_AXIS]; + + prepare_move(); + //ClearToSend(); + return; + } + break; + case 365: // M364 Set SCARA scaling for X Y Z + for(int8_t i=0; i < 3; i++) + { + if(code_seen(axis_codes[i])) + { + + axis_scaling[i] = code_value(); + + } + } + break; + #endif case 400: // M400 finish all moves { st_synchronize(); @@ -3255,8 +3477,46 @@ void calculate_delta(float cartesian[3]) void prepare_move() { clamp_to_software_endstops(destination); - previous_millis_cmd = millis(); + + #ifdef SCARA //for now same as delta-code + +float difference[NUM_AXIS]; +for (int8_t i=0; i < NUM_AXIS; i++) { + difference[i] = destination[i] - current_position[i]; +} + +float cartesian_mm = sqrt( sq(difference[X_AXIS]) + + sq(difference[Y_AXIS]) + + sq(difference[Z_AXIS])); +if (cartesian_mm < 0.000001) { cartesian_mm = abs(difference[E_AXIS]); } +if (cartesian_mm < 0.000001) { return; } +float seconds = 6000 * cartesian_mm / feedrate / feedmultiply; +int steps = max(1, int(scara_segments_per_second * seconds)); + //SERIAL_ECHOPGM("mm="); SERIAL_ECHO(cartesian_mm); + //SERIAL_ECHOPGM(" seconds="); SERIAL_ECHO(seconds); + //SERIAL_ECHOPGM(" steps="); SERIAL_ECHOLN(steps); +for (int s = 1; s <= steps; s++) { + float fraction = float(s) / float(steps); + for(int8_t i=0; i < NUM_AXIS; i++) { + destination[i] = current_position[i] + difference[i] * fraction; + } + + + calculate_delta(destination); + //SERIAL_ECHOPGM("destination[0]="); SERIAL_ECHOLN(destination[0]); + //SERIAL_ECHOPGM("destination[1]="); SERIAL_ECHOLN(destination[1]); + //SERIAL_ECHOPGM("destination[2]="); SERIAL_ECHOLN(destination[2]); + //SERIAL_ECHOPGM("delta[X_AXIS]="); SERIAL_ECHOLN(delta[X_AXIS]); + //SERIAL_ECHOPGM("delta[Y_AXIS]="); SERIAL_ECHOLN(delta[Y_AXIS]); + //SERIAL_ECHOPGM("delta[Z_AXIS]="); SERIAL_ECHOLN(delta[Z_AXIS]); + + plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], + destination[E_AXIS], feedrate*feedmultiply/60/100.0, + active_extruder); +} +#endif // SCARA + #ifdef DELTA float difference[NUM_AXIS]; for (int8_t i=0; i < NUM_AXIS; i++) { @@ -3282,7 +3542,8 @@ void prepare_move() destination[E_AXIS], feedrate*feedmultiply/60/100.0, active_extruder); } -#else + +#endif // DELTA #ifdef DUAL_X_CARRIAGE if (active_extruder_parked) @@ -3325,6 +3586,7 @@ void prepare_move() } #endif //DUAL_X_CARRIAGE +#if ! (defined DELTA || defined SCARA) // Do not use feedmultiply for E or Z only moves if( (current_position[X_AXIS] == destination [X_AXIS]) && (current_position[Y_AXIS] == destination [Y_AXIS])) { plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); @@ -3332,7 +3594,8 @@ void prepare_move() else { plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate*feedmultiply/60/100.0, active_extruder); } -#endif //else DELTA +#endif // !(DELTA || SCARA) + for(int8_t i=0; i < NUM_AXIS; i++) { current_position[i] = destination[i]; } @@ -3400,6 +3663,89 @@ void controllerFan() } #endif +#ifdef SCARA +void calculate_SCARA_forward_Transform(float f_scara[3]) +{ + // Perform forward kinematics, and place results in delta[3] + // The maths and first version has been done by QHARLEY . Integrated into masterbranch 06/2014 and slightly restructured by Joachim Cerny in June 2014 + + float x_sin, x_cos, y_sin, y_cos; + + //SERIAL_ECHOPGM("f_delta x="); SERIAL_ECHO(f_scara[X_AXIS]); + //SERIAL_ECHOPGM(" y="); SERIAL_ECHO(f_scara[Y_AXIS]); + + x_sin = sin(f_scara[X_AXIS]/SCARA_RAD2DEG) * Linkage_1/1000; + x_cos = cos(f_scara[X_AXIS]/SCARA_RAD2DEG) * Linkage_1/1000; + y_sin = sin(f_scara[Y_AXIS]/SCARA_RAD2DEG) * Linkage_2/1000; + y_cos = cos(f_scara[Y_AXIS]/SCARA_RAD2DEG) * Linkage_2/1000; + + // SERIAL_ECHOPGM(" x_sin="); SERIAL_ECHO(x_sin); + // SERIAL_ECHOPGM(" x_cos="); SERIAL_ECHO(x_cos); + // SERIAL_ECHOPGM(" y_sin="); SERIAL_ECHO(y_sin); + // SERIAL_ECHOPGM(" y_cos="); SERIAL_ECHOLN(y_cos); + + delta[X_AXIS] = x_cos + y_cos + SCARA_offset_x; //theta + delta[Y_AXIS] = x_sin + y_sin + SCARA_offset_y; //theta+phi + + //SERIAL_ECHOPGM(" delta[X_AXIS]="); SERIAL_ECHO(delta[X_AXIS]); + //SERIAL_ECHOPGM(" delta[Y_AXIS]="); SERIAL_ECHOLN(delta[Y_AXIS]); +} + +void calculate_delta(float cartesian[3]){ + //reverse kinematics. + // Perform reversed kinematics, and place results in delta[3] + // The maths and first version has been done by QHARLEY . Integrated into masterbranch 06/2014 and slightly restructured by Joachim Cerny in June 2014 + + float SCARA_pos[2]; + static float L1_2, L2_2, SCARA_C2, SCARA_S2, SCARA_K1, SCARA_K2, SCARA_theta, SCARA_psi; + + SCARA_pos[X_AXIS] = cartesian[X_AXIS] * axis_scaling[X_AXIS] - SCARA_offset_x; //Translate SCARA to standard X Y + SCARA_pos[Y_AXIS] = cartesian[Y_AXIS] * axis_scaling[Y_AXIS] - SCARA_offset_y; // With scaling factor. + + L1_2 = pow(Linkage_1/1000,2); + L2_2 = pow(Linkage_2/1000,2); + + #if (Linkage_1 == Linkage_2) + SCARA_C2 = ( ( pow(SCARA_pos[X_AXIS],2) + pow(SCARA_pos[Y_AXIS],2) ) / (2 * L1_2) ) - 1; + #else + SCARA_C2 = ( pow(SCARA_pos[X_AXIS],2) + pow(SCARA_pos[Y_AXIS],2) - L1_2 - L2_2 ) / 45000; + #endif + + SCARA_S2 = sqrt( 1 - pow(SCARA_C2,2) ); + + SCARA_K1 = Linkage_1/1000+Linkage_2/1000*SCARA_C2; + SCARA_K2 = Linkage_2/1000*SCARA_S2; + + SCARA_theta = (atan2(SCARA_pos[X_AXIS],SCARA_pos[Y_AXIS])-atan2(SCARA_K1, SCARA_K2))*-1; + SCARA_psi = atan2(SCARA_S2,SCARA_C2); + + delta[X_AXIS] = SCARA_theta * SCARA_RAD2DEG; // Multiply by 180/Pi - theta is support arm angle + delta[Y_AXIS] = (SCARA_theta + SCARA_psi) * SCARA_RAD2DEG; // - equal to sub arm angle (inverted motor) + delta[Z_AXIS] = cartesian[Z_AXIS]; + + + /* + SERIAL_ECHOPGM("cartesian x="); SERIAL_ECHO(cartesian[X_AXIS]); + SERIAL_ECHOPGM(" y="); SERIAL_ECHO(cartesian[Y_AXIS]); + SERIAL_ECHOPGM(" z="); SERIAL_ECHOLN(cartesian[Z_AXIS]); + + SERIAL_ECHOPGM("scara x="); SERIAL_ECHO(SCARA_pos[X_AXIS]); + SERIAL_ECHOPGM(" y="); SERIAL_ECHOLN(SCARA_pos[Y_AXIS]); + + SERIAL_ECHOPGM("delta x="); SERIAL_ECHO(delta[X_AXIS]); + SERIAL_ECHOPGM(" y="); SERIAL_ECHO(delta[Y_AXIS]); + SERIAL_ECHOPGM(" z="); SERIAL_ECHOLN(delta[Z_AXIS]); + + SERIAL_ECHOPGM("C2="); SERIAL_ECHO(SCARA_C2); + SERIAL_ECHOPGM(" S2="); SERIAL_ECHO(SCARA_S2); + SERIAL_ECHOPGM(" Theta="); SERIAL_ECHO(SCARA_theta); + SERIAL_ECHOPGM(" Psi="); SERIAL_ECHOLN(SCARA_psi); + SERIAL_ECHOLN(" "); + */ +} + +#endif + #ifdef TEMP_STAT_LEDS static bool blue_led = false; static bool red_led = false; diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h new file mode 100644 index 0000000000..b3a8cd1d2b --- /dev/null +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -0,0 +1,743 @@ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H + +// This configuration file contains the basic settings. +// Advanced settings can be found in Configuration_adv.h +// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + +//=========================================================================== +//========================= SCARA Settings ================================== +//=========================================================================== +// SCARA-mode for Marlin has been developed by QHARLEY in ZA in 2012/2013. Implemented +// and slightly reworked by JCERNY in 06/2014 with the goal to bring it into Master-Branch +// QHARLEYS Autobedlevelling has not been ported, because Marlin has now Bed-levelling +// You might need Z-Min endstop on SCARA-Printer to use this feature. Actually untested! +// Uncomment to use Morgan scara mode +#define SCARA +#define scara_segments_per_second 200 +// Length of inner support arm +#define Linkage_1 150000 //um Preprocessor cannot handle decimal point... +// Length of outer support arm Measure arm lengths precisely, and enter +#define Linkage_2 150000 //um define in micrometer + +// SCARA tower offset (position of Tower relative to bed zero position) +// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. +#define SCARA_offset_x 100 //mm +#define SCARA_offset_y -56 //mm +#define SCARA_RAD2DEG 57.2957795 // to convert RAD to degrees + +//=========================================================================== +//========================= SCARA Settings end ================================== +//=========================================================================== + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. + +// SERIAL_PORT selects which serial port should be used for communication with the host. +// This allows the connection of wireless adapters (for instance) to non-default port pins. +// Serial port 0 is still used by the Arduino bootloader regardless of this setting. +#define SERIAL_PORT 0 + +// This determines the communication speed of the printer +// This determines the communication speed of the printer +#define BAUDRATE 250000 + +// This enables the serial port associated to the Bluetooth interface +//#define BTENABLED // Enable BT interface on AT90USB devices + + +//// The following define selects which electronics board you have. Please choose the one that matches your setup +// 10 = Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics" +// 11 = Gen7 v1.1, v1.2 = 11 +// 12 = Gen7 v1.3 +// 13 = Gen7 v1.4 +// 131 = OpenHardware.co.za custom Gen7 electronics +// 2 = Cheaptronic v1.0 +// 20 = Sethi 3D_1 +// 3 = MEGA/RAMPS up to 1.2 = 3 +// 33 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed) +// 34 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed) +// 35 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Fan) +// 4 = Duemilanove w/ ATMega328P pin assignment +// 5 = Gen6 +// 51 = Gen6 deluxe +// 6 = Sanguinololu < 1.2 +// 62 = Sanguinololu 1.2 and above +// 63 = Melzi +// 64 = STB V1.1 +// 65 = Azteeg X1 +// 66 = Melzi with ATmega1284 (MaKr3d version) +// 67 = Azteeg X3 +// 68 = Azteeg X3 Pro +// 7 = Ultimaker +// 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare) +// 72 = Ultimainboard 2.x (Uses TEMP_SENSOR 20) +// 77 = 3Drag Controller +// 8 = Teensylu +// 80 = Rumba +// 81 = Printrboard (AT90USB1286) +// 82 = Brainwave (AT90USB646) +// 83 = SAV Mk-I (AT90USB1286) +// 84 = Teensy++2.0 (AT90USB1286) // CLI compile: DEFINES=AT90USBxx_TEENSYPP_ASSIGNMENTS HARDWARE_MOTHERBOARD=84 make +// 9 = Gen3+ +// 70 = Megatronics +// 701= Megatronics v2.0 +// 702= Minitronics v1.0 +// 90 = Alpha OMCA board +// 91 = Final OMCA board +// 301= Rambo +// 21 = Elefu Ra Board (v3) +// 88 = 5DPrint D8 Driver Board + +#ifndef MOTHERBOARD +#define MOTHERBOARD 33 +#endif + +// Define this to set a custom name for your generic Mendel, +// #define CUSTOM_MENDEL_NAME "This Mendel" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// #define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// This defines the number of extruders +#define EXTRUDERS 1 + +//// The following define selects which power supply you have. Please choose the one that matches your setup +// 1 = ATX +// 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + +#define POWER_SUPPLY 1 + +// Define this to have the electronics keep the power supply off on startup. If you don't know what this is leave it. +// #define PS_DEFAULT_OFF + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== +// +//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table +// +//// Temperature sensor settings: +// -2 is thermocouple with MAX6675 (only for sensor 0) +// -1 is thermocouple with AD595 +// 0 is not used +// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup) +// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) +// 3 is Mendel-parts thermistor (4.7k pullup) +// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! +// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup) +// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) +// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) +// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) +// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) +// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) +// 10 is 100k RS thermistor 198-961 (4.7k pullup) +// 11 is 100k beta 3950 1% thermistor (4.7k pullup) +// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) +// 20 is the PT100 circuit found in the Ultimainboard V2.x +// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 +// +// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k +// (but gives greater accuracy and more stable PID) +// 51 is 100k thermistor - EPCOS (1k pullup) +// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup) +// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) +// +// 1047 is Pt1000 with 4k7 pullup +// 1010 is Pt1000 with 1k pullup (non standard) +// 147 is Pt100 with 4k7 pullup +// 110 is Pt100 with 1k pullup (non standard) + +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_BED 1 + +// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Actual temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define BED_MAXTEMP 150 + +// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the +// average current. The value should be an integer and the heat bed will be turned on for 1 interval of +// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. +//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 + +// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS +//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R +//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R + +// PID settings: +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX 255 // limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#ifdef PIDTEMP + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more then PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + #define PID_INTEGRAL_DRIVE_MAX 255 //limit for the integral term + #define K1 0.95 //smoothing factor within the PID + #define PID_dT ((OVERSAMPLENR * 8.0)/(F_CPU / 64.0 / 256.0)) //sampling period of the temperature routine + +// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it +// Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + +// MakerGear +// #define DEFAULT_Kp 7.0 +// #define DEFAULT_Ki 0.1 +// #define DEFAULT_Kd 12 + +// Mendel Parts V9 on 12V +// #define DEFAULT_Kp 63.0 +// #define DEFAULT_Ki 2.25 +// #define DEFAULT_Kd 440 +#endif // PIDTEMP + +// Bed Temperature Control +// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis +// +// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. +// If your PID_dT above is the default, and correct for your hardware/configuration, that means 7.689Hz, +// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. +// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. +// If your configuration is significantly different than this and you don't understand the issues involved, you probably +// shouldn't use bed PID until someone else verifies your hardware works. +// If this is enabled, find your own PID constants below. +//#define PIDTEMPBED +// +//#define BED_LIMIT_SWITCHING + +// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. +// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) +// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, +// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#ifdef PIDTEMPBED +//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) +//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + +//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) +//from pidautotune +// #define DEFAULT_bedKp 97.1 +// #define DEFAULT_bedKi 1.41 +// #define DEFAULT_bedKd 1675.16 + +// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + + + +//this prevents dangerous Extruder moves, i.e. if the temperature is under the limit +//can be software-disabled for whatever purposes by +#define PREVENT_DANGEROUS_EXTRUDE +//if PREVENT_DANGEROUS_EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately. +#define PREVENT_LENGTHY_EXTRUDE + +#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances. + +//=========================================================================== +//=============================Mechanical Settings=========================== +//=========================================================================== + +// Uncomment the following line to enable CoreXY kinematics +// #define COREXY + +// coarse Endstop Settings +//#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors + +#ifndef ENDSTOPPULLUPS + // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // #define ENDSTOPPULLUP_XMAX + // #define ENDSTOPPULLUP_YMAX + #define ENDSTOPPULLUP_ZMAX // open pin, inverted + #define ENDSTOPPULLUP_XMIN // open pin, inverted + #define ENDSTOPPULLUP_YMIN // open pin, inverted + // #define ENDSTOPPULLUP_ZMIN +#endif + +#ifdef ENDSTOPPULLUPS + #define ENDSTOPPULLUP_XMAX + #define ENDSTOPPULLUP_YMAX + #define ENDSTOPPULLUP_ZMAX + #define ENDSTOPPULLUP_XMIN + #define ENDSTOPPULLUP_YMIN + #define ENDSTOPPULLUP_ZMIN +#endif + +// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. +const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. +const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. +const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. +const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. +const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. +const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. +//#define DISABLE_MAX_ENDSTOPS +//#define DISABLE_MIN_ENDSTOPS + +// Disable max endstops for compatibility with endstop checking routine +#if defined(COREXY) && !defined(DISABLE_MAX_ENDSTOPS) + #define DISABLE_MAX_ENDSTOPS +#endif + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis when it's not being used. +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled + +#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true +#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false +#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true +#define INVERT_E0_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false + +// ENDSTOP SETTINGS: +// Sets direction of endstop s when homing; 1=MAX, -1=MIN +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 +#define Z_HOME_DIR -1 + +#define min_software_endstops true // If true, axis won't move to coordinates less than HOME_POS. +#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below. + +// Travel limits after homing +#define X_MAX_POS 200 +#define X_MIN_POS 0 +#define Y_MAX_POS 200 +#define Y_MIN_POS 0 +#define Z_MAX_POS 225 +#define Z_MIN_POS MANUAL_Z_HOME_POS + +#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) +#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) +#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) +//============================= Bed Auto Leveling =========================== + +//#define ENABLE_AUTO_BED_LEVELING // Delete the comment to enable (remove // at the start of the line) + +#ifdef ENABLE_AUTO_BED_LEVELING + +// There are 2 different ways to pick the X and Y locations to probe: + +// - "grid" mode +// Probe every point in a rectangular grid +// You must specify the rectangle, and the density of sample points +// This mode is preferred because there are more measurements. +// It used to be called ACCURATE_BED_LEVELING but "grid" is more descriptive + +// - "3-point" mode +// Probe 3 arbitrary points on the bed (that aren't colinear) +// You must specify the X & Y coordinates of all 3 points + + #define AUTO_BED_LEVELING_GRID + // with AUTO_BED_LEVELING_GRID, the bed is sampled in a + // AUTO_BED_LEVELING_GRID_POINTSxAUTO_BED_LEVELING_GRID_POINTS grid + // and least squares solution is calculated + // Note: this feature occupies 10'206 byte + #ifdef AUTO_BED_LEVELING_GRID + + // set the rectangle in which to probe + #define LEFT_PROBE_BED_POSITION 15 + #define RIGHT_PROBE_BED_POSITION 170 + #define BACK_PROBE_BED_POSITION 180 + #define FRONT_PROBE_BED_POSITION 20 + + // set the number of grid points per dimension + // I wouldn't see a reason to go above 3 (=9 probing points on the bed) + #define AUTO_BED_LEVELING_GRID_POINTS 2 + + + #else // not AUTO_BED_LEVELING_GRID + // with no grid, just probe 3 arbitrary points. A simple cross-product + // is used to esimate the plane of the print bed + + #define ABL_PROBE_PT_1_X 15 + #define ABL_PROBE_PT_1_Y 180 + #define ABL_PROBE_PT_2_X 15 + #define ABL_PROBE_PT_2_Y 20 + #define ABL_PROBE_PT_3_X 170 + #define ABL_PROBE_PT_3_Y 20 + + #endif // AUTO_BED_LEVELING_GRID + + + // these are the offsets to the probe relative to the extruder tip (Hotend - Probe) + #define X_PROBE_OFFSET_FROM_EXTRUDER -25 + #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 + #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 + + //#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance. + // Be sure you have this distance over your Z_MAX_POS in case + + #define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min + + #define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point. + #define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points + + + //If defined, the Probe servo will be turned on only during movement and then turned off to avoid jerk + //The value is the delay to turn the servo off after powered on - depends on the servo speed; 300ms is good value, but you can try lower it. + // You MUST HAVE the SERVO_ENDSTOPS defined to use here a value higher than zero otherwise your code will not compile. + +// #define PROBE_SERVO_DEACTIVATION_DELAY 300 + + +//If you have enabled the Bed Auto Leveling and are using the same Z Probe for Z Homing, +//it is highly recommended you let this Z_SAFE_HOMING enabled!!! + + // #define Z_SAFE_HOMING // This feature is meant to avoid Z homing with probe outside the bed area. + // When defined, it will: + // - Allow Z homing only after X and Y homing AND stepper drivers still enabled + // - If stepper drivers timeout, it will need X and Y homing again before Z homing + // - Position the probe in a defined XY point before Z Homing when homing all axis (G28) + // - Block Z homing only when the probe is outside bed area. + + #ifdef Z_SAFE_HOMING + + #define Z_SAFE_HOMING_X_POINT (X_MAX_LENGTH/2) // X point for Z homing when homing all axis (G28) + #define Z_SAFE_HOMING_Y_POINT (Y_MAX_LENGTH/2) // Y point for Z homing when homing all axis (G28) + + #endif + +#endif // ENABLE_AUTO_BED_LEVELING + + +// The position of the homing switches +#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used +//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0) + +//Manual homing switch locations: +// For deltabots this means top and center of the Cartesian print volume. +// For SCARA: Offset between HomingPosition and Bed X=0 / Y=0 +#define MANUAL_X_HOME_POS -20 +#define MANUAL_Y_HOME_POS -48 +#define MANUAL_Z_HOME_POS 0.1 // Distance between nozzle and print surface after homing. + + +//// MOVEMENT SETTINGS +#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E +#define HOMING_FEEDRATE {40*60, 40*60, 10*60, 0} // set the homing speeds (mm/min) + +// default settings + +//#define DEFAULT_AXIS_STEPS_PER_UNIT {85.6,85.6,200/1.25,970} // default steps per unit for Ultimaker +#define DEFAULT_AXIS_STEPS_PER_UNIT {109,109,200/1.25,970} // default steps per unit for Ultimaker +#define DEFAULT_MAX_FEEDRATE {200, 200, 30, 45} // (mm/sec) +#define DEFAULT_MAX_ACCELERATION {300,300,30,1500} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot. + +#define DEFAULT_ACCELERATION 300 // X, Y, Z and E max acceleration in mm/s^2 for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for retracts + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +// #define EXTRUDER_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +// #define EXTRUDER_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// The speed change that does not require acceleration (i.e. the software might assume it can be done instantaneously) +#define DEFAULT_XYJERK 10.0 // (mm/sec) +#define DEFAULT_ZJERK 10.0 // (mm/sec) +#define DEFAULT_EJERK 5.0 // (mm/sec) + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +// Custom M code points +//#define CUSTOM_M_CODES +#ifdef CUSTOM_M_CODES + #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851 + #define Z_PROBE_OFFSET_RANGE_MIN -15 + #define Z_PROBE_OFFSET_RANGE_MAX -5 +#endif + + +// EEPROM +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +//define this to enable EEPROM support +#define EEPROM_SETTINGS +//to disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out: +// please keep turned on if you can. +#define EEPROM_CHITCHAT + +// Preheat Constants +#define PLA_PREHEAT_HOTEND_TEMP 180 +#define PLA_PREHEAT_HPB_TEMP 70 +#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 + +#define ABS_PREHEAT_HOTEND_TEMP 240 +#define ABS_PREHEAT_HPB_TEMP 100 +#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 + +//LCD and SD support +//#define ULTRA_LCD //general LCD support, also 16x2 +//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) +//#define SDSUPPORT // Enable SD Card Support in Hardware Console +//#define SDSLOW // Use slower SD transfer mode (not normally needed - uncomment if you're getting volume init error) +//#define SD_CHECK_AND_RETRY // Use CRC checks and retries on the SD communication +//#define ENCODER_PULSES_PER_STEP 1 // Increase if you have a high resolution encoder +//#define ENCODER_STEPS_PER_MENU_ITEM 5 // Set according to ENCODER_PULSES_PER_STEP or your liking +//#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. +//#define ULTIPANEL //the UltiPanel as on Thingiverse +//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click + +// The MaKr3d Makr-Panel with graphic controller and SD support +// http://reprap.org/wiki/MaKr3d_MaKrPanel +//#define MAKRPANEL + +// The RepRapDiscount Smart Controller (white PCB) +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// The GADGETS3D G3D LCD/SD Controller (blue PCB) +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +//#define G3D_PANEL + +// The RepRapDiscount FULL GRAPHIC Smart Controller (quadratic white PCB) +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// The RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // how much should be moved when a key is pressed, eg 10.0 means 10mm per click + +// The Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARUDINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C +//#define RA_CONTROL_PANEL + +//automatic expansion +#if defined (MAKRPANEL) + #define DOGLCD + #define SDSUPPORT + #define ULTIPANEL + #define NEWPANEL + #define DEFAULT_LCD_CONTRAST 17 +#endif + +#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define DOGLCD + #define U8GLIB_ST7920 + #define REPRAP_DISCOUNT_SMART_CONTROLLER +#endif + +#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) + #define ULTIPANEL + #define NEWPANEL +#endif + +#if defined(REPRAPWORLD_KEYPAD) + #define NEWPANEL + #define ULTIPANEL +#endif +#if defined(RA_CONTROL_PANEL) + #define ULTIPANEL + #define NEWPANEL + #define LCD_I2C_TYPE_PCA8574 + #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander +#endif + +//I2C PANELS + +//#define LCD_I2C_SAINSMART_YWROBOT +#ifdef LCD_I2C_SAINSMART_YWROBOT + // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home ) + // Make sure it is placed in the Arduino libraries directory. + #define LCD_I2C_TYPE_PCF8575 + #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander + #define NEWPANEL + #define ULTIPANEL +#endif + +// PANELOLU2 LCD with status LEDs, separate encoder and click inputs +//#define LCD_I2C_PANELOLU2 +#ifdef LCD_I2C_PANELOLU2 + // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) + // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. + // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file) + // Note: The PANELOLU2 encoder click input can either be directly connected to a pin + // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). + #define LCD_I2C_TYPE_MCP23017 + #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander + #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD + #define NEWPANEL + #define ULTIPANEL + + #ifndef ENCODER_PULSES_PER_STEP + #define ENCODER_PULSES_PER_STEP 4 + #endif + + #ifndef ENCODER_STEPS_PER_MENU_ITEM + #define ENCODER_STEPS_PER_MENU_ITEM 1 + #endif + + + #ifdef LCD_USE_I2C_BUZZER + #define LCD_FEEDBACK_FREQUENCY_HZ 1000 + #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 + #endif + +#endif + +// Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs +//#define LCD_I2C_VIKI +#ifdef LCD_I2C_VIKI + // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) + // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. + // Note: The pause/stop/resume LCD button pin should be connected to the Arduino + // BTN_ENC pin (or set BTN_ENC to -1 if not used) + #define LCD_I2C_TYPE_MCP23017 + #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander + #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) + #define NEWPANEL + #define ULTIPANEL +#endif + +// Shift register panels +// --------------------- +// 2 wire Non-latching LCD SR from: +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection +//#define SR_LCD +#ifdef SR_LCD + #define SR_LCD_2W_NL // Non latching 2 wire shift register + //#define NEWPANEL +#endif + + +#ifdef ULTIPANEL +// #define NEWPANEL //enable this if you have a click-encoder panel + #define SDSUPPORT + #define ULTRA_LCD + #ifdef DOGLCD // Change number of lines to match the DOG graphic display + #define LCD_WIDTH 20 + #define LCD_HEIGHT 5 + #else + #define LCD_WIDTH 20 + #define LCD_HEIGHT 4 + #endif +#else //no panel but just LCD + #ifdef ULTRA_LCD + #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display + #define LCD_WIDTH 20 + #define LCD_HEIGHT 5 + #else + #define LCD_WIDTH 16 + #define LCD_HEIGHT 2 + #endif + #endif +#endif + +// default LCD contrast for dogm-like LCD displays +#ifdef DOGLCD +# ifndef DEFAULT_LCD_CONTRAST +# define DEFAULT_LCD_CONTRAST 32 +# endif +#endif + +// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Temperature status LEDs that display the hotend and bet temperature. +// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. +// Otherwise the RED led is on. There is 1C hysteresis. +//#define TEMP_STAT_LEDS + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not ass annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +// #define PHOTOGRAPH_PIN 23 + +// SF send wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder. +//#define BARICUDA + +//define BlinkM/CyzRgb Support +//#define BLINKM + +/*********************************************************************\ +* R/C SERVO support +* Sponsored by TrinityLabs, Reworked by codexmas +**********************************************************************/ + +// Number of servos +// +// If you select a configuration below, this will receive a default value and does not need to be set manually +// set it manually if you have more servos than extruders and wish to manually control some +// leaving it undefined or defining as 0 will disable the servo subsystem +// If unsure, leave commented / disabled +// +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Servo Endstops +// +// This allows for servo actuated endstops, primary usage is for the Z Axis to eliminate calibration or bed height changes. +// Use M206 command to correct for switch height offset to actual nozzle height. Store that setting with M500. +// +//#define SERVO_ENDSTOPS {-1, -1, 0} // Servo index for X, Y, Z. Disable with -1 +//#define SERVO_ENDSTOP_ANGLES {0,0, 0,0, 70,0} // X,Y,Z Axis Extend and Retract angles + +#include "Configuration_adv.h" +#include "thermistortables.h" + +#endif //__CONFIGURATION_H diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h new file mode 100644 index 0000000000..e500d3d51b --- /dev/null +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -0,0 +1,507 @@ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +#ifdef BED_LIMIT_SWITCHING + #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS +#endif +#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control + +//// Heating sanity check: +// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature +// If the temperature has not increased at the end of that period, the target temperature is set to zero. +// It can be reset with another M104/M109. This check is also only triggered if the target temperature and the current temperature +// differ by at least 2x WATCH_TEMP_INCREASE +//#define WATCH_TEMP_PERIOD 40000 //40 seconds +//#define WATCH_TEMP_INCREASE 10 //Heat up at least 10 degree in 20 seconds + +#ifdef PIDTEMP + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + #define PID_ADD_EXTRUSION_RATE + #ifdef PID_ADD_EXTRUSION_RATE + #define DEFAULT_Kc (1) //heating power=Kc*(e_speed) + #endif +#endif + + +//automatic temperature: The hot end target temperature is calculated by all the buffered lines of gcode. +//The maximum buffered steps/sec of the extruder motor are called "se". +//You enter the autotemp mode by a M109 S B F +// the target temperature is set to mintemp+factor*se[steps/sec] and limited by mintemp and maxtemp +// you exit the value by any M109 without F* +// Also, if the temperature is set to a value +// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results +// as long as it supports dual x-carriages. (M605 S0) +// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so +// that additional slicer support is not required. (M605 S1) +// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all +// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at +// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + +// This is the default power-up mode which can be later using M605. +#define DEFAULT_DUAL_X_CARRIAGE_MODE 0 + +// As the x-carriages are independent we can now account for any relative Z offset +#define EXTRUDER1_Z_OFFSET 0.0 // z offset relative to extruder 0 + +// Default settings in "Auto-park Mode" +#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder +#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + +// Default x offset in duplication mode (typically set to half print bed width) +#define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif //DUAL_X_CARRIAGE + +//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: +#define X_HOME_RETRACT_MM 3 +#define Y_HOME_RETRACT_MM 3 +#define Z_HOME_RETRACT_MM 3 +//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. +#ifdef SCARA + #define QUICK_HOME //SCARA needs Quickhome +#endif + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step) + +//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +//default stepper release if idle +#define DEFAULT_STEPPER_DEACTIVE_TIME 240 + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +// Feedrates for manual moves along X, Y, Z, E from panel +#ifdef ULTIPANEL +#define MANUAL_FEEDRATE {50*60, 50*60, 10*60, 60} // set the speeds for manual moves (mm/min) +#endif + +//Comment to disable setting feedrate multiplier via encoder +#ifdef ULTIPANEL + #define ULTIPANEL_FEEDMULTIPLY +#endif + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +//#define SLOWDOWN +#ifdef SCARA + #undef SLOWDOWN +#endif +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec) + +// MS1 MS2 Stepper Driver Microstepping mode table +#define MICROSTEP1 LOW,LOW +#define MICROSTEP2 HIGH,LOW +#define MICROSTEP4 LOW,HIGH +#define MICROSTEP8 HIGH,HIGH +#define MICROSTEP16 HIGH,HIGH + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] + +// Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards) +#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) + +// uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro +//#define DIGIPOT_I2C +// Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8 +#define DIGIPOT_I2C_NUM_CHANNELS 8 +// actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS +#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? +#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + +#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. +// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. +// using: +//#define MENU_ADDAUTOSTART + +// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation. +//#define USE_WATCHDOG + +#ifdef USE_WATCHDOG +// If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. +// The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. +// However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. +//#define WATCHDOG_RESET_MANUAL +#endif + +// Enable the option to stop SD printing when hitting and endstops, needs to be enabled from the LCD menu when this option is enabled. +//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + +// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process +// it can e.g. be used to change z-positions in the print startup phase in real-time +// does not respect endstops! +//#define BABYSTEPPING +#ifdef BABYSTEPPING + #define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions + #define BABYSTEP_INVERT_Z false //true for inverse movements in Z + #define BABYSTEP_Z_MULTIPLICATOR 2 //faster z movements + + #ifdef COREXY + #error BABYSTEPPING not implemented for COREXY yet. + #endif + + #ifdef DELTA + #ifdef BABYSTEP_XY + #error BABYSTEPPING only implemented for Z axis on deltabots. + #endif + #endif + + #ifdef SCARA + #error BABYSTEPPING not implemented for SCARA yet. + #endif + +#endif + +// extruder advance constant (s2/mm3) +// +// advance (steps) = STEPS_PER_CUBIC_MM_E * EXTUDER_ADVANCE_K * cubic mm per second ^ 2 +// +// Hooke's law says: force = k * distance +// Bernoulli's principle says: v ^ 2 / 2 + g . h + pressure / density = constant +// so: v ^ 2 is proportional to number of steps we advance the extruder +//#define ADVANCE + +#ifdef ADVANCE + #define EXTRUDER_ADVANCE_K .0 + + #define D_FILAMENT 1.75 + #define STEPS_MM_E 836 + #define EXTRUTION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159) + #define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS]/ EXTRUTION_AREA) + +#endif // ADVANCE + +// Arc interpretation settings: +#define MM_PER_ARC_SEGMENT 1 +#define N_ARC_CORRECTION 25 + +const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement + +// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted +// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT +// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should +// be commented out otherwise +#define SDCARDDETECTINVERTED + +#ifdef ULTIPANEL + #undef SDCARDDETECTINVERTED +#endif + +// Power Signal Control Definitions +// By default use ATX definition +#ifndef POWER_SUPPLY + #define POWER_SUPPLY 1 +#endif +// 1 = ATX +#if (POWER_SUPPLY == 1) + #define PS_ON_AWAKE LOW + #define PS_ON_ASLEEP HIGH +#endif +// 2 = X-Box 360 203W +#if (POWER_SUPPLY == 2) + #define PS_ON_AWAKE HIGH + #define PS_ON_ASLEEP LOW +#endif + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//=============================Buffers ============================ +//=========================================================================== + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering. +#if defined SDSUPPORT + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + + +//The ASCII buffer for receiving from the serial: +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + + +// Firmware based and LCD controlled retract +// M207 and M208 can be used to define parameters for the retraction. +// The retraction can be called by the slicer using G10 and G11 +// until then, intended retractions can be detected by moves that only extrude and the direction. +// the moves are than replaced by the firmware controlled ones. + +// #define FWRETRACT //ONLY PARTIALLY TESTED +#ifdef FWRETRACT + #define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt + #define RETRACT_LENGTH 3 //default retract length (positive mm) + #define RETRACT_FEEDRATE 30 //default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 //default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s) +#endif + +//adds support for experimental filament exchange support M600; requires display +#ifdef ULTIPANEL + #define FILAMENTCHANGEENABLE + #ifdef FILAMENTCHANGEENABLE + #define FILAMENTCHANGE_XPOS 3 + #define FILAMENTCHANGE_YPOS 3 + #define FILAMENTCHANGE_ZADD 10 + #define FILAMENTCHANGE_FIRSTRETRACT -2 + #define FILAMENTCHANGE_FINALRETRACT -100 + #endif +#endif + +#ifdef FILAMENTCHANGEENABLE + #ifdef EXTRUDER_RUNOUT_PREVENT + #error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE + #endif +#endif + +//=========================================================================== +//============================= Define Defines ============================ +//=========================================================================== +#if EXTRUDERS > 1 && defined TEMP_SENSOR_1_AS_REDUNDANT + #error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1" +#endif + +#if EXTRUDERS > 1 && defined HEATERS_PARALLEL + #error "You cannot use HEATERS_PARALLEL if EXTRUDERS > 1" +#endif + +#if TEMP_SENSOR_0 > 0 + #define THERMISTORHEATER_0 TEMP_SENSOR_0 + #define HEATER_0_USES_THERMISTOR +#endif +#if TEMP_SENSOR_1 > 0 + #define THERMISTORHEATER_1 TEMP_SENSOR_1 + #define HEATER_1_USES_THERMISTOR +#endif +#if TEMP_SENSOR_2 > 0 + #define THERMISTORHEATER_2 TEMP_SENSOR_2 + #define HEATER_2_USES_THERMISTOR +#endif +#if TEMP_SENSOR_BED > 0 + #define THERMISTORBED TEMP_SENSOR_BED + #define BED_USES_THERMISTOR +#endif +#if TEMP_SENSOR_0 == -1 + #define HEATER_0_USES_AD595 +#endif +#if TEMP_SENSOR_1 == -1 + #define HEATER_1_USES_AD595 +#endif +#if TEMP_SENSOR_2 == -1 + #define HEATER_2_USES_AD595 +#endif +#if TEMP_SENSOR_BED == -1 + #define BED_USES_AD595 +#endif +#if TEMP_SENSOR_0 == -2 + #define HEATER_0_USES_MAX6675 +#endif +#if TEMP_SENSOR_0 == 0 + #undef HEATER_0_MINTEMP + #undef HEATER_0_MAXTEMP +#endif +#if TEMP_SENSOR_1 == 0 + #undef HEATER_1_MINTEMP + #undef HEATER_1_MAXTEMP +#endif +#if TEMP_SENSOR_2 == 0 + #undef HEATER_2_MINTEMP + #undef HEATER_2_MAXTEMP +#endif +#if TEMP_SENSOR_BED == 0 + #undef BED_MINTEMP + #undef BED_MAXTEMP +#endif + + +#endif //__CONFIGURATION_ADV_H diff --git a/Marlin/thermistortables.h b/Marlin/thermistortables.h index 86bf5c2d4e..07b385e119 100644 --- a/Marlin/thermistortables.h +++ b/Marlin/thermistortables.h @@ -1021,81 +1021,6 @@ const short temptable_1047[][2] PROGMEM = { PtLine(300,1000,4700) }; #endif -#if (THERMISTORHEATER_0 == 70) || (THERMISTORHEATER_1 == 70) || (THERMISTORHEATER_2 == 70) || (THERMISTORBED == 70) // 500C thermistor for Pico hot end -const short temptable_70[][2] PROGMEM = { - { 110.774119598719*OVERSAMPLENR , 350 }, - { 118.214386957249*OVERSAMPLENR , 345 }, - { 126.211418543166*OVERSAMPLENR , 340 }, - { 134.789559066223*OVERSAMPLENR , 335 }, - { 144.004513869701*OVERSAMPLENR , 330 }, - { 153.884483790827*OVERSAMPLENR , 325 }, - { 164.484880793637*OVERSAMPLENR , 320 }, - { 175.848885102724*OVERSAMPLENR , 315 }, - { 188.006799079015*OVERSAMPLENR , 310 }, - { 201.008072969044*OVERSAMPLENR , 305 }, - { 214.83716032276*OVERSAMPLENR , 300 }, - { 229.784739779664*OVERSAMPLENR , 295 }, - { 245.499466045473*OVERSAMPLENR , 290 }, - { 262.2766342096*OVERSAMPLENR , 285 }, - { 280.073883176433*OVERSAMPLENR , 280 }, - { 298.952693467726*OVERSAMPLENR , 275 }, - { 318.808251051674*OVERSAMPLENR , 270 }, - { 337.490932563222*OVERSAMPLENR , 265 }, - { 361.683649122745*OVERSAMPLENR , 260 }, - { 384.717024083981*OVERSAMPLENR , 255 }, - { 408.659301759076*OVERSAMPLENR , 250 }, - { 433.471659455884*OVERSAMPLENR , 245 }, - { 459.199039926034*OVERSAMPLENR , 240 }, - { 485.566500982316*OVERSAMPLENR , 235 }, - { 512.538918631075*OVERSAMPLENR , 230 }, - { 539.980999544838*OVERSAMPLENR , 225 }, - { 567.783095549935*OVERSAMPLENR , 220 }, - { 595.698041673552*OVERSAMPLENR , 215 }, - { 623.633922319597*OVERSAMPLENR , 210 }, - { 651.356162750829*OVERSAMPLENR , 205 }, - { 678.700901620956*OVERSAMPLENR , 200 }, - { 705.528145361264*OVERSAMPLENR , 195 }, - { 731.61267976339*OVERSAMPLENR , 190 }, - { 756.786212184365*OVERSAMPLENR , 185 }, - { 780.950223357761*OVERSAMPLENR , 180 }, - { 804.012961595082*OVERSAMPLENR , 175 }, - { 825.904975939166*OVERSAMPLENR , 170 }, - { 846.403941639008*OVERSAMPLENR , 165 }, - { 865.52326974895*OVERSAMPLENR , 160 }, - { 883.246145367727*OVERSAMPLENR , 155 }, - { 899.5821946515*OVERSAMPLENR , 150 }, - { 914.544289228582*OVERSAMPLENR , 145 }, - { 928.145628221761*OVERSAMPLENR , 140 }, - { 940.422208546562*OVERSAMPLENR , 135 }, - { 951.456922916497*OVERSAMPLENR , 130 }, - { 961.303500633788*OVERSAMPLENR , 125 }, - { 970.044756889055*OVERSAMPLENR , 120 }, - { 977.761456230051*OVERSAMPLENR , 115 }, - { 984.540978083453*OVERSAMPLENR , 110 }, - { 990.440780765757*OVERSAMPLENR , 105 }, - { 995.589621465301*OVERSAMPLENR , 100 }, - { 1000.02514280144*OVERSAMPLENR , 95 }, - { 1003.84429789876*OVERSAMPLENR , 90 }, - { 1007.10199009318*OVERSAMPLENR , 85 }, - { 1009.87151698323*OVERSAMPLENR , 80 }, - { 1012.21633594237*OVERSAMPLENR , 75 }, - { 1014.18959892949*OVERSAMPLENR , 70 }, - { 1015.84079162998*OVERSAMPLENR , 65 }, - { 1017.21555915335*OVERSAMPLENR , 60 }, - { 1018.35284662863*OVERSAMPLENR , 55 }, - { 1019.28926921888*OVERSAMPLENR , 50 }, - { 1020.05398015669*OVERSAMPLENR , 45 }, - { 1020.67737496272*OVERSAMPLENR , 40 }, - { 1021.1802909627*OVERSAMPLENR , 35 }, - { 1021.58459281248*OVERSAMPLENR , 30 }, - { 1021.90701441192*OVERSAMPLENR , 25 }, - { 1022.16215103698*OVERSAMPLENR , 20 }, - { 1022.36275529549*OVERSAMPLENR , 15 }, - { 1022.51930392497*OVERSAMPLENR , 10 }, - { 1022.64051573734*OVERSAMPLENR , 5 }, - { 1022.73355805611*OVERSAMPLENR , 0 } -}; -#endif #define _TT_NAME(_N) temptable_ ## _N #define TT_NAME(_N) _TT_NAME(_N) diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index f09dd410d6..0c3ee32a96 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -1,1626 +1,1630 @@ -#include "temperature.h" -#include "ultralcd.h" -#ifdef ULTRA_LCD -#include "Marlin.h" -#include "language.h" -#include "cardreader.h" -#include "temperature.h" -#include "stepper.h" -#include "ConfigurationStore.h" - -int8_t encoderDiff; /* encoderDiff is updated from interrupt context and added to encoderPosition every LCD update */ - -/* Configuration settings */ -int plaPreheatHotendTemp; -int plaPreheatHPBTemp; -int plaPreheatFanSpeed; - -int absPreheatHotendTemp; -int absPreheatHPBTemp; -int absPreheatFanSpeed; - - -#ifdef ULTIPANEL -static float manual_feedrate[] = MANUAL_FEEDRATE; -#endif // ULTIPANEL - -/* !Configuration settings */ - -//Function pointer to menu functions. -typedef void (*menuFunc_t)(); - -uint8_t lcd_status_message_level; -char lcd_status_message[LCD_WIDTH+1] = WELCOME_MSG; - -#ifdef DOGLCD -#include "dogm_lcd_implementation.h" -#else -#include "ultralcd_implementation_hitachi_HD44780.h" -#endif - -/** forward declarations **/ - -void copy_and_scalePID_i(); -void copy_and_scalePID_d(); - -/* Different menus */ -static void lcd_status_screen(); -#ifdef ULTIPANEL -extern bool powersupply; -static void lcd_main_menu(); -static void lcd_tune_menu(); -static void lcd_prepare_menu(); -static void lcd_move_menu(); -static void lcd_control_menu(); -static void lcd_control_temperature_menu(); -static void lcd_control_temperature_preheat_pla_settings_menu(); -static void lcd_control_temperature_preheat_abs_settings_menu(); -static void lcd_control_motion_menu(); -#ifdef DOGLCD -static void lcd_set_contrast(); -#endif -static void lcd_control_retract_menu(); -static void lcd_sdcard_menu(); - -static void lcd_quick_feedback();//Cause an LCD refresh, and give the user visual or audible feedback that something has happened - -/* Different types of actions that can be used in menu items. */ -static void menu_action_back(menuFunc_t data); -static void menu_action_submenu(menuFunc_t data); -static void menu_action_gcode(const char* pgcode); -static void menu_action_function(menuFunc_t data); -static void menu_action_sdfile(const char* filename, char* longFilename); -static void menu_action_sddirectory(const char* filename, char* longFilename); -static void menu_action_setting_edit_bool(const char* pstr, bool* ptr); -static void menu_action_setting_edit_int3(const char* pstr, int* ptr, int minValue, int maxValue); -static void menu_action_setting_edit_float3(const char* pstr, float* ptr, float minValue, float maxValue); -static void menu_action_setting_edit_float32(const char* pstr, float* ptr, float minValue, float maxValue); -static void menu_action_setting_edit_float5(const char* pstr, float* ptr, float minValue, float maxValue); -static void menu_action_setting_edit_float51(const char* pstr, float* ptr, float minValue, float maxValue); -static void menu_action_setting_edit_float52(const char* pstr, float* ptr, float minValue, float maxValue); -static void menu_action_setting_edit_long5(const char* pstr, unsigned long* ptr, unsigned long minValue, unsigned long maxValue); -static void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, menuFunc_t callbackFunc); -static void menu_action_setting_edit_callback_int3(const char* pstr, int* ptr, int minValue, int maxValue, menuFunc_t callbackFunc); -static void menu_action_setting_edit_callback_float3(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); -static void menu_action_setting_edit_callback_float32(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); -static void menu_action_setting_edit_callback_float5(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); -static void menu_action_setting_edit_callback_float51(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); -static void menu_action_setting_edit_callback_float52(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); -static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned long* ptr, unsigned long minValue, unsigned long maxValue, menuFunc_t callbackFunc); - -#define ENCODER_FEEDRATE_DEADZONE 10 - -#if !defined(LCD_I2C_VIKI) - #ifndef ENCODER_STEPS_PER_MENU_ITEM - #define ENCODER_STEPS_PER_MENU_ITEM 5 - #endif - #ifndef ENCODER_PULSES_PER_STEP - #define ENCODER_PULSES_PER_STEP 1 - #endif -#else - #ifndef ENCODER_STEPS_PER_MENU_ITEM - #define ENCODER_STEPS_PER_MENU_ITEM 2 // VIKI LCD rotary encoder uses a different number of steps per rotation - #endif - #ifndef ENCODER_PULSES_PER_STEP - #define ENCODER_PULSES_PER_STEP 1 - #endif -#endif - - -/* Helper macros for menus */ -#define START_MENU() do { \ - if (encoderPosition > 0x8000) encoderPosition = 0; \ - if (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM < currentMenuViewOffset) currentMenuViewOffset = encoderPosition / ENCODER_STEPS_PER_MENU_ITEM;\ - uint8_t _lineNr = currentMenuViewOffset, _menuItemNr; \ - bool wasClicked = LCD_CLICKED;\ - for(uint8_t _drawLineNr = 0; _drawLineNr < LCD_HEIGHT; _drawLineNr++, _lineNr++) { \ - _menuItemNr = 0; -#define MENU_ITEM(type, label, args...) do { \ - if (_menuItemNr == _lineNr) { \ - if (lcdDrawUpdate) { \ - const char* _label_pstr = PSTR(label); \ - if ((encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) { \ - lcd_implementation_drawmenu_ ## type ## _selected (_drawLineNr, _label_pstr , ## args ); \ - }else{\ - lcd_implementation_drawmenu_ ## type (_drawLineNr, _label_pstr , ## args ); \ - }\ - }\ - if (wasClicked && (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) {\ - lcd_quick_feedback(); \ - menu_action_ ## type ( args ); \ - return;\ - }\ - }\ - _menuItemNr++;\ -} while(0) -#define MENU_ITEM_DUMMY() do { _menuItemNr++; } while(0) -#define MENU_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args ) -#define MENU_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args ) -#define END_MENU() \ - if (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM >= _menuItemNr) encoderPosition = _menuItemNr * ENCODER_STEPS_PER_MENU_ITEM - 1; \ - if ((uint8_t)(encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) >= currentMenuViewOffset + LCD_HEIGHT) { currentMenuViewOffset = (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) - LCD_HEIGHT + 1; lcdDrawUpdate = 1; _lineNr = currentMenuViewOffset - 1; _drawLineNr = -1; } \ - } } while(0) - -/** Used variables to keep track of the menu */ -#ifndef REPRAPWORLD_KEYPAD -volatile uint8_t buttons;//Contains the bits of the currently pressed buttons. -#else -volatile uint8_t buttons_reprapworld_keypad; // to store the reprapworld_keypad shift register values -#endif -#ifdef LCD_HAS_SLOW_BUTTONS -volatile uint8_t slow_buttons;//Contains the bits of the currently pressed buttons. -#endif -uint8_t currentMenuViewOffset; /* scroll offset in the current menu */ -uint32_t blocking_enc; -uint8_t lastEncoderBits; -uint32_t encoderPosition; -#if (SDCARDDETECT > 0) -bool lcd_oldcardstatus; -#endif -#endif//ULTIPANEL - -menuFunc_t currentMenu = lcd_status_screen; /* function pointer to the currently active menu */ -uint32_t lcd_next_update_millis; -uint8_t lcd_status_update_delay; -uint8_t lcdDrawUpdate = 2; /* Set to none-zero when the LCD needs to draw, decreased after every draw. Set to 2 in LCD routines so the LCD gets at least 1 full redraw (first redraw is partial) */ - -//prevMenu and prevEncoderPosition are used to store the previous menu location when editing settings. -menuFunc_t prevMenu = NULL; -uint16_t prevEncoderPosition; -//Variables used when editing values. -const char* editLabel; -void* editValue; -int32_t minEditValue, maxEditValue; -menuFunc_t callbackFunc; - -// place-holders for Ki and Kd edits -float raw_Ki, raw_Kd; - -/* Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent */ -static void lcd_status_screen() -{ - if (lcd_status_update_delay) - lcd_status_update_delay--; - else - lcdDrawUpdate = 1; - if (lcdDrawUpdate) - { - lcd_implementation_status_screen(); - lcd_status_update_delay = 10; /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */ - } -#ifdef ULTIPANEL - if (LCD_CLICKED) - { - currentMenu = lcd_main_menu; - encoderPosition = 0; - lcd_quick_feedback(); +#include "temperature.h" +#include "ultralcd.h" +#ifdef ULTRA_LCD +#include "Marlin.h" +#include "language.h" +#include "cardreader.h" +#include "temperature.h" +#include "stepper.h" +#include "ConfigurationStore.h" + +int8_t encoderDiff; /* encoderDiff is updated from interrupt context and added to encoderPosition every LCD update */ + +/* Configuration settings */ +int plaPreheatHotendTemp; +int plaPreheatHPBTemp; +int plaPreheatFanSpeed; + +int absPreheatHotendTemp; +int absPreheatHPBTemp; +int absPreheatFanSpeed; + + +#ifdef ULTIPANEL +static float manual_feedrate[] = MANUAL_FEEDRATE; +#endif // ULTIPANEL + +/* !Configuration settings */ + +//Function pointer to menu functions. +typedef void (*menuFunc_t)(); + +uint8_t lcd_status_message_level; +char lcd_status_message[LCD_WIDTH+1] = WELCOME_MSG; + +#ifdef DOGLCD +#include "dogm_lcd_implementation.h" +#else +#include "ultralcd_implementation_hitachi_HD44780.h" +#endif + +/** forward declarations **/ + +void copy_and_scalePID_i(); +void copy_and_scalePID_d(); + +/* Different menus */ +static void lcd_status_screen(); +#ifdef ULTIPANEL +extern bool powersupply; +static void lcd_main_menu(); +static void lcd_tune_menu(); +static void lcd_prepare_menu(); +static void lcd_move_menu(); +static void lcd_control_menu(); +static void lcd_control_temperature_menu(); +static void lcd_control_temperature_preheat_pla_settings_menu(); +static void lcd_control_temperature_preheat_abs_settings_menu(); +static void lcd_control_motion_menu(); +#ifdef DOGLCD +static void lcd_set_contrast(); +#endif +static void lcd_control_retract_menu(); +static void lcd_sdcard_menu(); + +static void lcd_quick_feedback();//Cause an LCD refresh, and give the user visual or audible feedback that something has happened + +/* Different types of actions that can be used in menu items. */ +static void menu_action_back(menuFunc_t data); +static void menu_action_submenu(menuFunc_t data); +static void menu_action_gcode(const char* pgcode); +static void menu_action_function(menuFunc_t data); +static void menu_action_sdfile(const char* filename, char* longFilename); +static void menu_action_sddirectory(const char* filename, char* longFilename); +static void menu_action_setting_edit_bool(const char* pstr, bool* ptr); +static void menu_action_setting_edit_int3(const char* pstr, int* ptr, int minValue, int maxValue); +static void menu_action_setting_edit_float3(const char* pstr, float* ptr, float minValue, float maxValue); +static void menu_action_setting_edit_float32(const char* pstr, float* ptr, float minValue, float maxValue); +static void menu_action_setting_edit_float5(const char* pstr, float* ptr, float minValue, float maxValue); +static void menu_action_setting_edit_float51(const char* pstr, float* ptr, float minValue, float maxValue); +static void menu_action_setting_edit_float52(const char* pstr, float* ptr, float minValue, float maxValue); +static void menu_action_setting_edit_long5(const char* pstr, unsigned long* ptr, unsigned long minValue, unsigned long maxValue); +static void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, menuFunc_t callbackFunc); +static void menu_action_setting_edit_callback_int3(const char* pstr, int* ptr, int minValue, int maxValue, menuFunc_t callbackFunc); +static void menu_action_setting_edit_callback_float3(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); +static void menu_action_setting_edit_callback_float32(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); +static void menu_action_setting_edit_callback_float5(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); +static void menu_action_setting_edit_callback_float51(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); +static void menu_action_setting_edit_callback_float52(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); +static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned long* ptr, unsigned long minValue, unsigned long maxValue, menuFunc_t callbackFunc); + +#define ENCODER_FEEDRATE_DEADZONE 10 + +#if !defined(LCD_I2C_VIKI) + #ifndef ENCODER_STEPS_PER_MENU_ITEM + #define ENCODER_STEPS_PER_MENU_ITEM 5 + #endif + #ifndef ENCODER_PULSES_PER_STEP + #define ENCODER_PULSES_PER_STEP 1 + #endif +#else + #ifndef ENCODER_STEPS_PER_MENU_ITEM + #define ENCODER_STEPS_PER_MENU_ITEM 2 // VIKI LCD rotary encoder uses a different number of steps per rotation + #endif + #ifndef ENCODER_PULSES_PER_STEP + #define ENCODER_PULSES_PER_STEP 1 + #endif +#endif + + +/* Helper macros for menus */ +#define START_MENU() do { \ + if (encoderPosition > 0x8000) encoderPosition = 0; \ + if (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM < currentMenuViewOffset) currentMenuViewOffset = encoderPosition / ENCODER_STEPS_PER_MENU_ITEM;\ + uint8_t _lineNr = currentMenuViewOffset, _menuItemNr; \ + bool wasClicked = LCD_CLICKED;\ + for(uint8_t _drawLineNr = 0; _drawLineNr < LCD_HEIGHT; _drawLineNr++, _lineNr++) { \ + _menuItemNr = 0; +#define MENU_ITEM(type, label, args...) do { \ + if (_menuItemNr == _lineNr) { \ + if (lcdDrawUpdate) { \ + const char* _label_pstr = PSTR(label); \ + if ((encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) { \ + lcd_implementation_drawmenu_ ## type ## _selected (_drawLineNr, _label_pstr , ## args ); \ + }else{\ + lcd_implementation_drawmenu_ ## type (_drawLineNr, _label_pstr , ## args ); \ + }\ + }\ + if (wasClicked && (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) {\ + lcd_quick_feedback(); \ + menu_action_ ## type ( args ); \ + return;\ + }\ + }\ + _menuItemNr++;\ +} while(0) +#define MENU_ITEM_DUMMY() do { _menuItemNr++; } while(0) +#define MENU_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args ) +#define MENU_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args ) +#define END_MENU() \ + if (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM >= _menuItemNr) encoderPosition = _menuItemNr * ENCODER_STEPS_PER_MENU_ITEM - 1; \ + if ((uint8_t)(encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) >= currentMenuViewOffset + LCD_HEIGHT) { currentMenuViewOffset = (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) - LCD_HEIGHT + 1; lcdDrawUpdate = 1; _lineNr = currentMenuViewOffset - 1; _drawLineNr = -1; } \ + } } while(0) + +/** Used variables to keep track of the menu */ +#ifndef REPRAPWORLD_KEYPAD +volatile uint8_t buttons;//Contains the bits of the currently pressed buttons. +#else +volatile uint8_t buttons_reprapworld_keypad; // to store the reprapworld_keypad shift register values +#endif +#ifdef LCD_HAS_SLOW_BUTTONS +volatile uint8_t slow_buttons;//Contains the bits of the currently pressed buttons. +#endif +uint8_t currentMenuViewOffset; /* scroll offset in the current menu */ +uint32_t blocking_enc; +uint8_t lastEncoderBits; +uint32_t encoderPosition; +#if (SDCARDDETECT > 0) +bool lcd_oldcardstatus; +#endif +#endif//ULTIPANEL + +menuFunc_t currentMenu = lcd_status_screen; /* function pointer to the currently active menu */ +uint32_t lcd_next_update_millis; +uint8_t lcd_status_update_delay; +uint8_t lcdDrawUpdate = 2; /* Set to none-zero when the LCD needs to draw, decreased after every draw. Set to 2 in LCD routines so the LCD gets at least 1 full redraw (first redraw is partial) */ + +//prevMenu and prevEncoderPosition are used to store the previous menu location when editing settings. +menuFunc_t prevMenu = NULL; +uint16_t prevEncoderPosition; +//Variables used when editing values. +const char* editLabel; +void* editValue; +int32_t minEditValue, maxEditValue; +menuFunc_t callbackFunc; + +// place-holders for Ki and Kd edits +float raw_Ki, raw_Kd; + +/* Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent */ +static void lcd_status_screen() +{ + if (lcd_status_update_delay) + lcd_status_update_delay--; + else + lcdDrawUpdate = 1; + if (lcdDrawUpdate) + { + lcd_implementation_status_screen(); + lcd_status_update_delay = 10; /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */ + } +#ifdef ULTIPANEL + if (LCD_CLICKED) + { + currentMenu = lcd_main_menu; + encoderPosition = 0; + lcd_quick_feedback(); lcd_implementation_init(); // to maybe revive the LCD if static electricity killed it. - } - -#ifdef ULTIPANEL_FEEDMULTIPLY - // Dead zone at 100% feedrate - if ((feedmultiply < 100 && (feedmultiply + int(encoderPosition)) > 100) || - (feedmultiply > 100 && (feedmultiply + int(encoderPosition)) < 100)) - { - encoderPosition = 0; - feedmultiply = 100; - } - - if (feedmultiply == 100 && int(encoderPosition) > ENCODER_FEEDRATE_DEADZONE) - { - feedmultiply += int(encoderPosition) - ENCODER_FEEDRATE_DEADZONE; - encoderPosition = 0; - } - else if (feedmultiply == 100 && int(encoderPosition) < -ENCODER_FEEDRATE_DEADZONE) - { - feedmultiply += int(encoderPosition) + ENCODER_FEEDRATE_DEADZONE; - encoderPosition = 0; - } - else if (feedmultiply != 100) - { - feedmultiply += int(encoderPosition); - encoderPosition = 0; - } -#endif//ULTIPANEL_FEEDMULTIPLY - - if (feedmultiply < 10) - feedmultiply = 10; - if (feedmultiply > 999) - feedmultiply = 999; -#endif//ULTIPANEL -} - -#ifdef ULTIPANEL -static void lcd_return_to_status() -{ - encoderPosition = 0; - currentMenu = lcd_status_screen; -} - -static void lcd_sdcard_pause() -{ - card.pauseSDPrint(); -} -static void lcd_sdcard_resume() -{ - card.startFileprint(); -} - -static void lcd_sdcard_stop() -{ - card.sdprinting = false; - card.closefile(); - quickStop(); - if(SD_FINISHED_STEPPERRELEASE) - { - enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND)); - } - autotempShutdown(); -} - -/* Menu implementation */ -static void lcd_main_menu() -{ - START_MENU(); - MENU_ITEM(back, MSG_WATCH, lcd_status_screen); - if (movesplanned() || IS_SD_PRINTING) - { - MENU_ITEM(submenu, MSG_TUNE, lcd_tune_menu); - }else{ - MENU_ITEM(submenu, MSG_PREPARE, lcd_prepare_menu); - } - MENU_ITEM(submenu, MSG_CONTROL, lcd_control_menu); -#ifdef SDSUPPORT - if (card.cardOK) - { - if (card.isFileOpen()) - { - if (card.sdprinting) - MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_sdcard_pause); - else - MENU_ITEM(function, MSG_RESUME_PRINT, lcd_sdcard_resume); - MENU_ITEM(function, MSG_STOP_PRINT, lcd_sdcard_stop); - }else{ - MENU_ITEM(submenu, MSG_CARD_MENU, lcd_sdcard_menu); -#if SDCARDDETECT < 1 - MENU_ITEM(gcode, MSG_CNG_SDCARD, PSTR("M21")); // SD-card changed by user -#endif - } - }else{ - MENU_ITEM(submenu, MSG_NO_CARD, lcd_sdcard_menu); -#if SDCARDDETECT < 1 - MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); // Manually initialize the SD-card via user interface -#endif - } -#endif - END_MENU(); -} - -#ifdef SDSUPPORT -static void lcd_autostart_sd() -{ - card.lastnr=0; - card.setroot(); - card.checkautostart(true); -} -#endif - -#ifdef BABYSTEPPING -static void lcd_babystep_x() -{ - if (encoderPosition != 0) - { - babystepsTodo[X_AXIS]+=(int)encoderPosition; - encoderPosition=0; - lcdDrawUpdate = 1; - } - if (lcdDrawUpdate) - { - lcd_implementation_drawedit(PSTR(MSG_BABYSTEPPING_X),""); - } - if (LCD_CLICKED) - { - lcd_quick_feedback(); - currentMenu = lcd_tune_menu; - encoderPosition = 0; - } -} - -static void lcd_babystep_y() -{ - if (encoderPosition != 0) - { - babystepsTodo[Y_AXIS]+=(int)encoderPosition; - encoderPosition=0; - lcdDrawUpdate = 1; - } - if (lcdDrawUpdate) - { - lcd_implementation_drawedit(PSTR(MSG_BABYSTEPPING_Y),""); - } - if (LCD_CLICKED) - { - lcd_quick_feedback(); - currentMenu = lcd_tune_menu; - encoderPosition = 0; - } -} - -static void lcd_babystep_z() -{ - if (encoderPosition != 0) - { - babystepsTodo[Z_AXIS]+=BABYSTEP_Z_MULTIPLICATOR*(int)encoderPosition; - encoderPosition=0; - lcdDrawUpdate = 1; - } - if (lcdDrawUpdate) - { - lcd_implementation_drawedit(PSTR(MSG_BABYSTEPPING_Z),""); - } - if (LCD_CLICKED) - { - lcd_quick_feedback(); - currentMenu = lcd_tune_menu; - encoderPosition = 0; - } -} -#endif //BABYSTEPPING - -static void lcd_tune_menu() -{ - START_MENU(); - MENU_ITEM(back, MSG_MAIN, lcd_main_menu); - MENU_ITEM_EDIT(int3, MSG_SPEED, &feedmultiply, 10, 999); - MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15); -#if TEMP_SENSOR_1 != 0 - MENU_ITEM_EDIT(int3, MSG_NOZZLE1, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15); -#endif -#if TEMP_SENSOR_2 != 0 - MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15); -#endif -#if TEMP_SENSOR_BED != 0 - MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15); -#endif - MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255); - MENU_ITEM_EDIT(int3, MSG_FLOW, &extrudemultiply, 10, 999); - MENU_ITEM_EDIT(int3, MSG_FLOW0, &extruder_multiply[0], 10, 999); -#if TEMP_SENSOR_1 != 0 - MENU_ITEM_EDIT(int3, MSG_FLOW1, &extruder_multiply[1], 10, 999); -#endif -#if TEMP_SENSOR_2 != 0 - MENU_ITEM_EDIT(int3, MSG_FLOW2, &extruder_multiply[2], 10, 999); -#endif - -#ifdef BABYSTEPPING - #ifdef BABYSTEP_XY - MENU_ITEM(submenu, MSG_BABYSTEP_X, lcd_babystep_x); - MENU_ITEM(submenu, MSG_BABYSTEP_Y, lcd_babystep_y); - #endif //BABYSTEP_XY - MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_babystep_z); -#endif -#ifdef FILAMENTCHANGEENABLE - MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600")); -#endif - END_MENU(); -} - -void lcd_preheat_pla0() -{ - setTargetHotend0(plaPreheatHotendTemp); - setTargetBed(plaPreheatHPBTemp); - fanSpeed = plaPreheatFanSpeed; - lcd_return_to_status(); - setWatch(); // heater sanity check timer -} - -void lcd_preheat_abs0() -{ - setTargetHotend0(absPreheatHotendTemp); - setTargetBed(absPreheatHPBTemp); - fanSpeed = absPreheatFanSpeed; - lcd_return_to_status(); - setWatch(); // heater sanity check timer -} - -#if TEMP_SENSOR_1 != 0 //2nd extruder preheat -void lcd_preheat_pla1() -{ - setTargetHotend1(plaPreheatHotendTemp); - setTargetBed(plaPreheatHPBTemp); - fanSpeed = plaPreheatFanSpeed; - lcd_return_to_status(); - setWatch(); // heater sanity check timer -} - -void lcd_preheat_abs1() -{ - setTargetHotend1(absPreheatHotendTemp); - setTargetBed(absPreheatHPBTemp); - fanSpeed = absPreheatFanSpeed; - lcd_return_to_status(); - setWatch(); // heater sanity check timer -} -#endif //2nd extruder preheat - -#if TEMP_SENSOR_2 != 0 //3 extruder preheat -void lcd_preheat_pla2() -{ - setTargetHotend2(plaPreheatHotendTemp); - setTargetBed(plaPreheatHPBTemp); - fanSpeed = plaPreheatFanSpeed; - lcd_return_to_status(); - setWatch(); // heater sanity check timer -} - -void lcd_preheat_abs2() -{ - setTargetHotend2(absPreheatHotendTemp); - setTargetBed(absPreheatHPBTemp); - fanSpeed = absPreheatFanSpeed; - lcd_return_to_status(); - setWatch(); // heater sanity check timer -} -#endif //3 extruder preheat - -#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //more than one extruder present -void lcd_preheat_pla012() -{ - setTargetHotend0(plaPreheatHotendTemp); - setTargetHotend1(plaPreheatHotendTemp); - setTargetHotend2(plaPreheatHotendTemp); - setTargetBed(plaPreheatHPBTemp); - fanSpeed = plaPreheatFanSpeed; - lcd_return_to_status(); - setWatch(); // heater sanity check timer -} - -void lcd_preheat_abs012() -{ - setTargetHotend0(absPreheatHotendTemp); - setTargetHotend1(absPreheatHotendTemp); - setTargetHotend2(absPreheatHotendTemp); - setTargetBed(absPreheatHPBTemp); - fanSpeed = absPreheatFanSpeed; - lcd_return_to_status(); - setWatch(); // heater sanity check timer -} -#endif //more than one extruder present - -void lcd_preheat_pla_bedonly() -{ - setTargetBed(plaPreheatHPBTemp); - fanSpeed = plaPreheatFanSpeed; - lcd_return_to_status(); - setWatch(); // heater sanity check timer -} - -void lcd_preheat_abs_bedonly() -{ - setTargetBed(absPreheatHPBTemp); - fanSpeed = absPreheatFanSpeed; - lcd_return_to_status(); - setWatch(); // heater sanity check timer -} - -static void lcd_preheat_pla_menu() -{ - START_MENU(); - MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu); - MENU_ITEM(function, MSG_PREHEAT_PLA0, lcd_preheat_pla0); -#if TEMP_SENSOR_1 != 0 //2 extruder preheat - MENU_ITEM(function, MSG_PREHEAT_PLA1, lcd_preheat_pla1); -#endif //2 extruder preheat -#if TEMP_SENSOR_2 != 0 //3 extruder preheat - MENU_ITEM(function, MSG_PREHEAT_PLA2, lcd_preheat_pla2); -#endif //3 extruder preheat -#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //all extruder preheat - MENU_ITEM(function, MSG_PREHEAT_PLA012, lcd_preheat_pla012); -#endif //2 extruder preheat -#if TEMP_SENSOR_BED != 0 - MENU_ITEM(function, MSG_PREHEAT_PLA_BEDONLY, lcd_preheat_pla_bedonly); -#endif - END_MENU(); -} - -static void lcd_preheat_abs_menu() -{ - START_MENU(); - MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu); - MENU_ITEM(function, MSG_PREHEAT_ABS0, lcd_preheat_abs0); -#if TEMP_SENSOR_1 != 0 //2 extruder preheat - MENU_ITEM(function, MSG_PREHEAT_ABS1, lcd_preheat_abs1); -#endif //2 extruder preheat -#if TEMP_SENSOR_2 != 0 //3 extruder preheat - MENU_ITEM(function, MSG_PREHEAT_ABS2, lcd_preheat_abs2); -#endif //3 extruder preheat -#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //all extruder preheat - MENU_ITEM(function, MSG_PREHEAT_ABS012, lcd_preheat_abs012); -#endif //2 extruder preheat -#if TEMP_SENSOR_BED != 0 - MENU_ITEM(function, MSG_PREHEAT_ABS_BEDONLY, lcd_preheat_abs_bedonly); -#endif - END_MENU(); -} - -void lcd_cooldown() -{ - setTargetHotend0(0); - setTargetHotend1(0); - setTargetHotend2(0); - setTargetBed(0); - fanSpeed = 0; - lcd_return_to_status(); -} - -static void lcd_prepare_menu() -{ - START_MENU(); - MENU_ITEM(back, MSG_MAIN, lcd_main_menu); -#ifdef SDSUPPORT - #ifdef MENU_ADDAUTOSTART - MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd); - #endif -#endif - MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84")); - MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28")); - //MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0")); -#if TEMP_SENSOR_0 != 0 - #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_BED != 0 - MENU_ITEM(submenu, MSG_PREHEAT_PLA, lcd_preheat_pla_menu); - MENU_ITEM(submenu, MSG_PREHEAT_ABS, lcd_preheat_abs_menu); - #else - MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla0); - MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs0); - #endif -#endif - MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown); -#if PS_ON_PIN > -1 - if (powersupply) - { - MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81")); - }else{ - MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80")); - } -#endif - MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu); - END_MENU(); -} - -float move_menu_scale; -static void lcd_move_menu_axis(); - -static void lcd_move_x() -{ - if (encoderPosition != 0) - { - refresh_cmd_timeout(); - current_position[X_AXIS] += float((int)encoderPosition) * move_menu_scale; - if (min_software_endstops && current_position[X_AXIS] < X_MIN_POS) - current_position[X_AXIS] = X_MIN_POS; - if (max_software_endstops && current_position[X_AXIS] > X_MAX_POS) - current_position[X_AXIS] = X_MAX_POS; - encoderPosition = 0; - #ifdef DELTA - calculate_delta(current_position); - plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS], manual_feedrate[X_AXIS]/60, active_extruder); - #else - plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[X_AXIS]/60, active_extruder); - #endif - lcdDrawUpdate = 1; - } - if (lcdDrawUpdate) - { - lcd_implementation_drawedit(PSTR("X"), ftostr31(current_position[X_AXIS])); - } - if (LCD_CLICKED) - { - lcd_quick_feedback(); - currentMenu = lcd_move_menu_axis; - encoderPosition = 0; - } -} -static void lcd_move_y() -{ - if (encoderPosition != 0) - { - refresh_cmd_timeout(); - current_position[Y_AXIS] += float((int)encoderPosition) * move_menu_scale; - if (min_software_endstops && current_position[Y_AXIS] < Y_MIN_POS) - current_position[Y_AXIS] = Y_MIN_POS; - if (max_software_endstops && current_position[Y_AXIS] > Y_MAX_POS) - current_position[Y_AXIS] = Y_MAX_POS; - encoderPosition = 0; - #ifdef DELTA - calculate_delta(current_position); - plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS], manual_feedrate[Y_AXIS]/60, active_extruder); - #else - plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[Y_AXIS]/60, active_extruder); - #endif - lcdDrawUpdate = 1; - } - if (lcdDrawUpdate) - { - lcd_implementation_drawedit(PSTR("Y"), ftostr31(current_position[Y_AXIS])); - } - if (LCD_CLICKED) - { - lcd_quick_feedback(); - currentMenu = lcd_move_menu_axis; - encoderPosition = 0; - } -} -static void lcd_move_z() -{ - if (encoderPosition != 0) - { - refresh_cmd_timeout(); - current_position[Z_AXIS] += float((int)encoderPosition) * move_menu_scale; - if (min_software_endstops && current_position[Z_AXIS] < Z_MIN_POS) - current_position[Z_AXIS] = Z_MIN_POS; - if (max_software_endstops && current_position[Z_AXIS] > Z_MAX_POS) - current_position[Z_AXIS] = Z_MAX_POS; - encoderPosition = 0; - #ifdef DELTA - calculate_delta(current_position); - plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS], manual_feedrate[Z_AXIS]/60, active_extruder); - #else - plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[Z_AXIS]/60, active_extruder); - #endif - lcdDrawUpdate = 1; - } - if (lcdDrawUpdate) - { - lcd_implementation_drawedit(PSTR("Z"), ftostr31(current_position[Z_AXIS])); - } - if (LCD_CLICKED) - { - lcd_quick_feedback(); - currentMenu = lcd_move_menu_axis; - encoderPosition = 0; - } -} -static void lcd_move_e() -{ - if (encoderPosition != 0) - { - current_position[E_AXIS] += float((int)encoderPosition) * move_menu_scale; - encoderPosition = 0; - #ifdef DELTA - calculate_delta(current_position); - plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS], manual_feedrate[E_AXIS]/60, active_extruder); - #else - plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[E_AXIS]/60, active_extruder); - #endif - lcdDrawUpdate = 1; - } - if (lcdDrawUpdate) - { - lcd_implementation_drawedit(PSTR("Extruder"), ftostr31(current_position[E_AXIS])); - } - if (LCD_CLICKED) - { - lcd_quick_feedback(); - currentMenu = lcd_move_menu_axis; - encoderPosition = 0; - } -} - -static void lcd_move_menu_axis() -{ - START_MENU(); - MENU_ITEM(back, MSG_MOVE_AXIS, lcd_move_menu); - MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_x); - MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_y); - if (move_menu_scale < 10.0) - { - MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_z); - MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e); - } - END_MENU(); -} - -static void lcd_move_menu_10mm() -{ - move_menu_scale = 10.0; - lcd_move_menu_axis(); -} -static void lcd_move_menu_1mm() -{ - move_menu_scale = 1.0; - lcd_move_menu_axis(); -} -static void lcd_move_menu_01mm() -{ - move_menu_scale = 0.1; - lcd_move_menu_axis(); -} - -static void lcd_move_menu() -{ - START_MENU(); - MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu); - MENU_ITEM(submenu, MSG_MOVE_10MM, lcd_move_menu_10mm); - MENU_ITEM(submenu, MSG_MOVE_1MM, lcd_move_menu_1mm); - MENU_ITEM(submenu, MSG_MOVE_01MM, lcd_move_menu_01mm); - //TODO:X,Y,Z,E - END_MENU(); -} - -static void lcd_control_menu() -{ - START_MENU(); - MENU_ITEM(back, MSG_MAIN, lcd_main_menu); - MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu); - MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu); -#ifdef DOGLCD -// MENU_ITEM_EDIT(int3, MSG_CONTRAST, &lcd_contrast, 0, 63); - MENU_ITEM(submenu, MSG_CONTRAST, lcd_set_contrast); -#endif -#ifdef FWRETRACT - MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu); -#endif -#ifdef EEPROM_SETTINGS - MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); - MENU_ITEM(function, MSG_LOAD_EPROM, Config_RetrieveSettings); -#endif - MENU_ITEM(function, MSG_RESTORE_FAILSAFE, Config_ResetDefault); - END_MENU(); -} - -static void lcd_control_temperature_menu() -{ -#ifdef PIDTEMP - // set up temp variables - undo the default scaling - raw_Ki = unscalePID_i(Ki); - raw_Kd = unscalePID_d(Kd); -#endif - - START_MENU(); - MENU_ITEM(back, MSG_CONTROL, lcd_control_menu); - MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15); -#if TEMP_SENSOR_1 != 0 - MENU_ITEM_EDIT(int3, MSG_NOZZLE1, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15); -#endif -#if TEMP_SENSOR_2 != 0 - MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15); -#endif -#if TEMP_SENSOR_BED != 0 - MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15); -#endif - MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255); -#ifdef AUTOTEMP - MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled); - MENU_ITEM_EDIT(float3, MSG_MIN, &autotemp_min, 0, HEATER_0_MAXTEMP - 15); - MENU_ITEM_EDIT(float3, MSG_MAX, &autotemp_max, 0, HEATER_0_MAXTEMP - 15); - MENU_ITEM_EDIT(float32, MSG_FACTOR, &autotemp_factor, 0.0, 1.0); -#endif -#ifdef PIDTEMP - MENU_ITEM_EDIT(float52, MSG_PID_P, &Kp, 1, 9990); - // i is typically a small value so allows values below 1 - MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I, &raw_Ki, 0.01, 9990, copy_and_scalePID_i); - MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D, &raw_Kd, 1, 9990, copy_and_scalePID_d); -# ifdef PID_ADD_EXTRUSION_RATE - MENU_ITEM_EDIT(float3, MSG_PID_C, &Kc, 1, 9990); -# endif//PID_ADD_EXTRUSION_RATE -#endif//PIDTEMP - MENU_ITEM(submenu, MSG_PREHEAT_PLA_SETTINGS, lcd_control_temperature_preheat_pla_settings_menu); - MENU_ITEM(submenu, MSG_PREHEAT_ABS_SETTINGS, lcd_control_temperature_preheat_abs_settings_menu); - END_MENU(); -} - -static void lcd_control_temperature_preheat_pla_settings_menu() -{ - START_MENU(); - MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu); - MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &plaPreheatFanSpeed, 0, 255); - MENU_ITEM_EDIT(int3, MSG_NOZZLE, &plaPreheatHotendTemp, 0, HEATER_0_MAXTEMP - 15); -#if TEMP_SENSOR_BED != 0 - MENU_ITEM_EDIT(int3, MSG_BED, &plaPreheatHPBTemp, 0, BED_MAXTEMP - 15); -#endif -#ifdef EEPROM_SETTINGS - MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); -#endif - END_MENU(); -} - -static void lcd_control_temperature_preheat_abs_settings_menu() -{ - START_MENU(); - MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu); - MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &absPreheatFanSpeed, 0, 255); - MENU_ITEM_EDIT(int3, MSG_NOZZLE, &absPreheatHotendTemp, 0, HEATER_0_MAXTEMP - 15); -#if TEMP_SENSOR_BED != 0 - MENU_ITEM_EDIT(int3, MSG_BED, &absPreheatHPBTemp, 0, BED_MAXTEMP - 15); -#endif -#ifdef EEPROM_SETTINGS - MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); -#endif - END_MENU(); -} - -static void lcd_control_motion_menu() -{ - START_MENU(); - MENU_ITEM(back, MSG_CONTROL, lcd_control_menu); -#ifdef ENABLE_AUTO_BED_LEVELING - MENU_ITEM_EDIT(float32, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, 0.5, 50); -#endif - MENU_ITEM_EDIT(float5, MSG_ACC, &acceleration, 500, 99000); - MENU_ITEM_EDIT(float3, MSG_VXY_JERK, &max_xy_jerk, 1, 990); - MENU_ITEM_EDIT(float52, MSG_VZ_JERK, &max_z_jerk, 0.1, 990); - MENU_ITEM_EDIT(float3, MSG_VE_JERK, &max_e_jerk, 1, 990); - MENU_ITEM_EDIT(float3, MSG_VMAX MSG_X, &max_feedrate[X_AXIS], 1, 999); - MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Y, &max_feedrate[Y_AXIS], 1, 999); - MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Z, &max_feedrate[Z_AXIS], 1, 999); - MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &max_feedrate[E_AXIS], 1, 999); - MENU_ITEM_EDIT(float3, MSG_VMIN, &minimumfeedrate, 0, 999); - MENU_ITEM_EDIT(float3, MSG_VTRAV_MIN, &mintravelfeedrate, 0, 999); - MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_X, &max_acceleration_units_per_sq_second[X_AXIS], 100, 99000, reset_acceleration_rates); - MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Y, &max_acceleration_units_per_sq_second[Y_AXIS], 100, 99000, reset_acceleration_rates); - MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Z, &max_acceleration_units_per_sq_second[Z_AXIS], 100, 99000, reset_acceleration_rates); - MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &max_acceleration_units_per_sq_second[E_AXIS], 100, 99000, reset_acceleration_rates); - MENU_ITEM_EDIT(float5, MSG_A_RETRACT, &retract_acceleration, 100, 99000); - MENU_ITEM_EDIT(float52, MSG_XSTEPS, &axis_steps_per_unit[X_AXIS], 5, 9999); - MENU_ITEM_EDIT(float52, MSG_YSTEPS, &axis_steps_per_unit[Y_AXIS], 5, 9999); - MENU_ITEM_EDIT(float51, MSG_ZSTEPS, &axis_steps_per_unit[Z_AXIS], 5, 9999); - MENU_ITEM_EDIT(float51, MSG_ESTEPS, &axis_steps_per_unit[E_AXIS], 5, 9999); -#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED - MENU_ITEM_EDIT(bool, MSG_ENDSTOP_ABORT, &abort_on_endstop_hit); -#endif - END_MENU(); -} - -#ifdef DOGLCD -static void lcd_set_contrast() -{ - if (encoderPosition != 0) - { - lcd_contrast -= encoderPosition; - if (lcd_contrast < 0) lcd_contrast = 0; - else if (lcd_contrast > 63) lcd_contrast = 63; - encoderPosition = 0; - lcdDrawUpdate = 1; - u8g.setContrast(lcd_contrast); - } - if (lcdDrawUpdate) - { - lcd_implementation_drawedit(PSTR(MSG_CONTRAST), itostr2(lcd_contrast)); - } - if (LCD_CLICKED) - { - lcd_quick_feedback(); - currentMenu = lcd_control_menu; - encoderPosition = 0; - } -} -#endif - -#ifdef FWRETRACT -static void lcd_control_retract_menu() -{ - START_MENU(); - MENU_ITEM(back, MSG_CONTROL, lcd_control_menu); - MENU_ITEM_EDIT(bool, MSG_AUTORETRACT, &autoretract_enabled); - MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT, &retract_length, 0, 100); - MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &retract_feedrate, 1, 999); - MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_ZLIFT, &retract_zlift, 0, 999); - MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER, &retract_recover_length, 0, 100); - MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &retract_recover_feedrate, 1, 999); - END_MENU(); -} -#endif - -#if SDCARDDETECT == -1 -static void lcd_sd_refresh() -{ - card.initsd(); - currentMenuViewOffset = 0; -} -#endif -static void lcd_sd_updir() -{ - card.updir(); - currentMenuViewOffset = 0; -} - -void lcd_sdcard_menu() -{ - if (lcdDrawUpdate == 0 && LCD_CLICKED == 0) - return; // nothing to do (so don't thrash the SD card) - uint16_t fileCnt = card.getnrfilenames(); - START_MENU(); - MENU_ITEM(back, MSG_MAIN, lcd_main_menu); - card.getWorkDirName(); - if(card.filename[0]=='/') - { -#if SDCARDDETECT == -1 - MENU_ITEM(function, LCD_STR_REFRESH MSG_REFRESH, lcd_sd_refresh); -#endif - }else{ - MENU_ITEM(function, LCD_STR_FOLDER "..", lcd_sd_updir); - } - - for(uint16_t i=0;i maxEditValue) \ - encoderPosition = maxEditValue; \ - if (lcdDrawUpdate) \ - lcd_implementation_drawedit(editLabel, _strFunc(((_type)encoderPosition) / scale)); \ - if (LCD_CLICKED) \ - { \ - *((_type*)editValue) = ((_type)encoderPosition) / scale; \ - lcd_quick_feedback(); \ - currentMenu = prevMenu; \ - encoderPosition = prevEncoderPosition; \ - } \ - } \ - void menu_edit_callback_ ## _name () \ - { \ - if ((int32_t)encoderPosition < minEditValue) \ - encoderPosition = minEditValue; \ - if ((int32_t)encoderPosition > maxEditValue) \ - encoderPosition = maxEditValue; \ - if (lcdDrawUpdate) \ - lcd_implementation_drawedit(editLabel, _strFunc(((_type)encoderPosition) / scale)); \ - if (LCD_CLICKED) \ - { \ - *((_type*)editValue) = ((_type)encoderPosition) / scale; \ - lcd_quick_feedback(); \ - currentMenu = prevMenu; \ - encoderPosition = prevEncoderPosition; \ - (*callbackFunc)();\ - } \ - } \ - static void menu_action_setting_edit_ ## _name (const char* pstr, _type* ptr, _type minValue, _type maxValue) \ - { \ - prevMenu = currentMenu; \ - prevEncoderPosition = encoderPosition; \ - \ - lcdDrawUpdate = 2; \ - currentMenu = menu_edit_ ## _name; \ - \ - editLabel = pstr; \ - editValue = ptr; \ - minEditValue = minValue * scale; \ - maxEditValue = maxValue * scale; \ - encoderPosition = (*ptr) * scale; \ - }\ - static void menu_action_setting_edit_callback_ ## _name (const char* pstr, _type* ptr, _type minValue, _type maxValue, menuFunc_t callback) \ - { \ - prevMenu = currentMenu; \ - prevEncoderPosition = encoderPosition; \ - \ - lcdDrawUpdate = 2; \ - currentMenu = menu_edit_callback_ ## _name; \ - \ - editLabel = pstr; \ - editValue = ptr; \ - minEditValue = minValue * scale; \ - maxEditValue = maxValue * scale; \ - encoderPosition = (*ptr) * scale; \ - callbackFunc = callback;\ - } -menu_edit_type(int, int3, itostr3, 1) -menu_edit_type(float, float3, ftostr3, 1) -menu_edit_type(float, float32, ftostr32, 100) -menu_edit_type(float, float5, ftostr5, 0.01) -menu_edit_type(float, float51, ftostr51, 10) -menu_edit_type(float, float52, ftostr52, 100) -menu_edit_type(unsigned long, long5, ftostr5, 0.01) - -#ifdef REPRAPWORLD_KEYPAD - static void reprapworld_keypad_move_z_up() { - encoderPosition = 1; - move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; - lcd_move_z(); - } - static void reprapworld_keypad_move_z_down() { - encoderPosition = -1; - move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; - lcd_move_z(); - } - static void reprapworld_keypad_move_x_left() { - encoderPosition = -1; - move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; - lcd_move_x(); - } - static void reprapworld_keypad_move_x_right() { - encoderPosition = 1; - move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; - lcd_move_x(); - } - static void reprapworld_keypad_move_y_down() { - encoderPosition = 1; - move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; - lcd_move_y(); - } - static void reprapworld_keypad_move_y_up() { - encoderPosition = -1; - move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; - lcd_move_y(); - } - static void reprapworld_keypad_move_home() { - enquecommand_P((PSTR("G28"))); // move all axis home - } -#endif - -/** End of menus **/ - -static void lcd_quick_feedback() -{ - lcdDrawUpdate = 2; - blocking_enc = millis() + 500; - lcd_implementation_quick_feedback(); -} - -/** Menu action functions **/ -static void menu_action_back(menuFunc_t data) -{ - currentMenu = data; - encoderPosition = 0; -} -static void menu_action_submenu(menuFunc_t data) -{ - currentMenu = data; - encoderPosition = 0; -} -static void menu_action_gcode(const char* pgcode) -{ - enquecommand_P(pgcode); -} -static void menu_action_function(menuFunc_t data) -{ - (*data)(); -} -static void menu_action_sdfile(const char* filename, char* longFilename) -{ - char cmd[30]; - char* c; - sprintf_P(cmd, PSTR("M23 %s"), filename); - for(c = &cmd[4]; *c; c++) - *c = tolower(*c); - enquecommand(cmd); - enquecommand_P(PSTR("M24")); - lcd_return_to_status(); -} -static void menu_action_sddirectory(const char* filename, char* longFilename) -{ - card.chdir(filename); - encoderPosition = 0; -} -static void menu_action_setting_edit_bool(const char* pstr, bool* ptr) -{ - *ptr = !(*ptr); -} -#endif//ULTIPANEL - -/** LCD API **/ -void lcd_init() -{ - lcd_implementation_init(); - -#ifdef NEWPANEL - pinMode(BTN_EN1,INPUT); - pinMode(BTN_EN2,INPUT); - WRITE(BTN_EN1,HIGH); - WRITE(BTN_EN2,HIGH); - #if BTN_ENC > 0 - pinMode(BTN_ENC,INPUT); - WRITE(BTN_ENC,HIGH); - #endif - #ifdef REPRAPWORLD_KEYPAD - pinMode(SHIFT_CLK,OUTPUT); - pinMode(SHIFT_LD,OUTPUT); - pinMode(SHIFT_OUT,INPUT); - WRITE(SHIFT_OUT,HIGH); - WRITE(SHIFT_LD,HIGH); - #endif -#else // Not NEWPANEL - #ifdef SR_LCD_2W_NL // Non latching 2 wire shift register - pinMode (SR_DATA_PIN, OUTPUT); - pinMode (SR_CLK_PIN, OUTPUT); - #elif defined(SHIFT_CLK) - pinMode(SHIFT_CLK,OUTPUT); - pinMode(SHIFT_LD,OUTPUT); - pinMode(SHIFT_EN,OUTPUT); - pinMode(SHIFT_OUT,INPUT); - WRITE(SHIFT_OUT,HIGH); - WRITE(SHIFT_LD,HIGH); - WRITE(SHIFT_EN,LOW); - #else - #ifdef ULTIPANEL - #error ULTIPANEL requires an encoder - #endif - #endif // SR_LCD_2W_NL -#endif//!NEWPANEL - -#if defined (SDSUPPORT) && defined(SDCARDDETECT) && (SDCARDDETECT > 0) - pinMode(SDCARDDETECT,INPUT); - WRITE(SDCARDDETECT, HIGH); - lcd_oldcardstatus = IS_SD_INSERTED; -#endif//(SDCARDDETECT > 0) -#ifdef LCD_HAS_SLOW_BUTTONS - slow_buttons = 0; -#endif - lcd_buttons_update(); -#ifdef ULTIPANEL - encoderDiff = 0; -#endif -} - -void lcd_update() -{ - static unsigned long timeoutToStatus = 0; - - #ifdef LCD_HAS_SLOW_BUTTONS - slow_buttons = lcd_implementation_read_slow_buttons(); // buttons which take too long to read in interrupt context - #endif - - lcd_buttons_update(); - - #if (SDCARDDETECT > 0) - if((IS_SD_INSERTED != lcd_oldcardstatus)) - { - lcdDrawUpdate = 2; - lcd_oldcardstatus = IS_SD_INSERTED; - lcd_implementation_init(); // to maybe revive the LCD if static electricity killed it. - - if(lcd_oldcardstatus) - { - card.initsd(); - LCD_MESSAGEPGM(MSG_SD_INSERTED); - } - else - { - card.release(); - LCD_MESSAGEPGM(MSG_SD_REMOVED); - } - } - #endif//CARDINSERTED - - if (lcd_next_update_millis < millis()) - { -#ifdef ULTIPANEL - #ifdef REPRAPWORLD_KEYPAD - if (REPRAPWORLD_KEYPAD_MOVE_Z_UP) { - reprapworld_keypad_move_z_up(); - } - if (REPRAPWORLD_KEYPAD_MOVE_Z_DOWN) { - reprapworld_keypad_move_z_down(); - } - if (REPRAPWORLD_KEYPAD_MOVE_X_LEFT) { - reprapworld_keypad_move_x_left(); - } - if (REPRAPWORLD_KEYPAD_MOVE_X_RIGHT) { - reprapworld_keypad_move_x_right(); - } - if (REPRAPWORLD_KEYPAD_MOVE_Y_DOWN) { - reprapworld_keypad_move_y_down(); - } - if (REPRAPWORLD_KEYPAD_MOVE_Y_UP) { - reprapworld_keypad_move_y_up(); - } - if (REPRAPWORLD_KEYPAD_MOVE_HOME) { - reprapworld_keypad_move_home(); - } - #endif - if (abs(encoderDiff) >= ENCODER_PULSES_PER_STEP) - { - lcdDrawUpdate = 1; - encoderPosition += encoderDiff / ENCODER_PULSES_PER_STEP; - encoderDiff = 0; - timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS; - } - if (LCD_CLICKED) - timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS; -#endif//ULTIPANEL - -#ifdef DOGLCD // Changes due to different driver architecture of the DOGM display - blink++; // Variable for fan animation and alive dot - u8g.firstPage(); - do - { - u8g.setFont(u8g_font_6x10_marlin); - u8g.setPrintPos(125,0); - if (blink % 2) u8g.setColorIndex(1); else u8g.setColorIndex(0); // Set color for the alive dot - u8g.drawPixel(127,63); // draw alive dot - u8g.setColorIndex(1); // black on white - (*currentMenu)(); - if (!lcdDrawUpdate) break; // Terminate display update, when nothing new to draw. This must be done before the last dogm.next() - } while( u8g.nextPage() ); -#else - (*currentMenu)(); -#endif - -#ifdef LCD_HAS_STATUS_INDICATORS - lcd_implementation_update_indicators(); -#endif - -#ifdef ULTIPANEL - if(timeoutToStatus < millis() && currentMenu != lcd_status_screen) - { - lcd_return_to_status(); - lcdDrawUpdate = 2; - } -#endif//ULTIPANEL - if (lcdDrawUpdate == 2) - lcd_implementation_clear(); - if (lcdDrawUpdate) - lcdDrawUpdate--; - lcd_next_update_millis = millis() + 100; - } -} - -void lcd_setstatus(const char* message) -{ - if (lcd_status_message_level > 0) - return; - strncpy(lcd_status_message, message, LCD_WIDTH); - lcdDrawUpdate = 2; -} -void lcd_setstatuspgm(const char* message) -{ - if (lcd_status_message_level > 0) - return; - strncpy_P(lcd_status_message, message, LCD_WIDTH); - lcdDrawUpdate = 2; -} -void lcd_setalertstatuspgm(const char* message) -{ - lcd_setstatuspgm(message); - lcd_status_message_level = 1; -#ifdef ULTIPANEL - lcd_return_to_status(); -#endif//ULTIPANEL -} -void lcd_reset_alert_level() -{ - lcd_status_message_level = 0; -} - -#ifdef DOGLCD -void lcd_setcontrast(uint8_t value) -{ - lcd_contrast = value & 63; - u8g.setContrast(lcd_contrast); -} -#endif - -#ifdef ULTIPANEL -/* Warning: This function is called from interrupt context */ -void lcd_buttons_update() -{ -#ifdef NEWPANEL - uint8_t newbutton=0; - if(READ(BTN_EN1)==0) newbutton|=EN_A; - if(READ(BTN_EN2)==0) newbutton|=EN_B; - #if BTN_ENC > 0 - if((blocking_enc>1; - if(READ(SHIFT_OUT)) - newbutton_reprapworld_keypad|=(1<<7); - WRITE(SHIFT_CLK,HIGH); - WRITE(SHIFT_CLK,LOW); - } - buttons_reprapworld_keypad=~newbutton_reprapworld_keypad; //invert it, because a pressed switch produces a logical 0 - #endif -#else //read it from the shift register - uint8_t newbutton=0; - WRITE(SHIFT_LD,LOW); - WRITE(SHIFT_LD,HIGH); - unsigned char tmp_buttons=0; - for(int8_t i=0;i<8;i++) - { - newbutton = newbutton>>1; - if(READ(SHIFT_OUT)) - newbutton|=(1<<7); - WRITE(SHIFT_CLK,HIGH); - WRITE(SHIFT_CLK,LOW); - } - buttons=~newbutton; //invert it, because a pressed switch produces a logical 0 -#endif//!NEWPANEL - - //manage encoder rotation - uint8_t enc=0; - if(buttons&EN_A) - enc|=(1<<0); - if(buttons&EN_B) - enc|=(1<<1); - if(enc != lastEncoderBits) - { - switch(enc) - { - case encrot0: - if(lastEncoderBits==encrot3) - encoderDiff++; - else if(lastEncoderBits==encrot1) - encoderDiff--; - break; - case encrot1: - if(lastEncoderBits==encrot0) - encoderDiff++; - else if(lastEncoderBits==encrot2) - encoderDiff--; - break; - case encrot2: - if(lastEncoderBits==encrot1) - encoderDiff++; - else if(lastEncoderBits==encrot3) - encoderDiff--; - break; - case encrot3: - if(lastEncoderBits==encrot2) - encoderDiff++; - else if(lastEncoderBits==encrot0) - encoderDiff--; - break; - } - } - lastEncoderBits = enc; -} - -void lcd_buzz(long duration, uint16_t freq) -{ -#ifdef LCD_USE_I2C_BUZZER - lcd.buzz(duration,freq); -#endif -} - -bool lcd_clicked() -{ - return LCD_CLICKED; -} -#endif//ULTIPANEL - -/********************************/ -/** Float conversion utilities **/ -/********************************/ -// convert float to string with +123.4 format -char conv[8]; -char *ftostr3(const float &x) -{ - return itostr3((int)x); -} - -char *itostr2(const uint8_t &x) -{ - //sprintf(conv,"%5.1f",x); - int xx=x; - conv[0]=(xx/10)%10+'0'; - conv[1]=(xx)%10+'0'; - conv[2]=0; - return conv; -} - -// convert float to string with +123.4 format -char *ftostr31(const float &x) -{ - int xx=x*10; - conv[0]=(xx>=0)?'+':'-'; - xx=abs(xx); - conv[1]=(xx/1000)%10+'0'; - conv[2]=(xx/100)%10+'0'; - conv[3]=(xx/10)%10+'0'; - conv[4]='.'; - conv[5]=(xx)%10+'0'; - conv[6]=0; - return conv; -} - -// convert float to string with 123.4 format -char *ftostr31ns(const float &x) -{ - int xx=x*10; - //conv[0]=(xx>=0)?'+':'-'; - xx=abs(xx); - conv[0]=(xx/1000)%10+'0'; - conv[1]=(xx/100)%10+'0'; - conv[2]=(xx/10)%10+'0'; - conv[3]='.'; - conv[4]=(xx)%10+'0'; - conv[5]=0; - return conv; -} - -char *ftostr32(const float &x) -{ - long xx=x*100; - if (xx >= 0) - conv[0]=(xx/10000)%10+'0'; - else - conv[0]='-'; - xx=abs(xx); - conv[1]=(xx/1000)%10+'0'; - conv[2]=(xx/100)%10+'0'; - conv[3]='.'; - conv[4]=(xx/10)%10+'0'; - conv[5]=(xx)%10+'0'; - conv[6]=0; - return conv; -} - -char *itostr31(const int &xx) -{ - conv[0]=(xx>=0)?'+':'-'; - conv[1]=(xx/1000)%10+'0'; - conv[2]=(xx/100)%10+'0'; - conv[3]=(xx/10)%10+'0'; - conv[4]='.'; - conv[5]=(xx)%10+'0'; - conv[6]=0; - return conv; -} - -char *itostr3(const int &xx) -{ - if (xx >= 100) - conv[0]=(xx/100)%10+'0'; - else - conv[0]=' '; - if (xx >= 10) - conv[1]=(xx/10)%10+'0'; - else - conv[1]=' '; - conv[2]=(xx)%10+'0'; - conv[3]=0; - return conv; -} - -char *itostr3left(const int &xx) -{ - if (xx >= 100) - { - conv[0]=(xx/100)%10+'0'; - conv[1]=(xx/10)%10+'0'; - conv[2]=(xx)%10+'0'; - conv[3]=0; - } - else if (xx >= 10) - { - conv[0]=(xx/10)%10+'0'; - conv[1]=(xx)%10+'0'; - conv[2]=0; - } - else - { - conv[0]=(xx)%10+'0'; - conv[1]=0; - } - return conv; -} - -char *itostr4(const int &xx) -{ - if (xx >= 1000) - conv[0]=(xx/1000)%10+'0'; - else - conv[0]=' '; - if (xx >= 100) - conv[1]=(xx/100)%10+'0'; - else - conv[1]=' '; - if (xx >= 10) - conv[2]=(xx/10)%10+'0'; - else - conv[2]=' '; - conv[3]=(xx)%10+'0'; - conv[4]=0; - return conv; -} - -// convert float to string with 12345 format -char *ftostr5(const float &x) -{ - long xx=abs(x); - if (xx >= 10000) - conv[0]=(xx/10000)%10+'0'; - else - conv[0]=' '; - if (xx >= 1000) - conv[1]=(xx/1000)%10+'0'; - else - conv[1]=' '; - if (xx >= 100) - conv[2]=(xx/100)%10+'0'; - else - conv[2]=' '; - if (xx >= 10) - conv[3]=(xx/10)%10+'0'; - else - conv[3]=' '; - conv[4]=(xx)%10+'0'; - conv[5]=0; - return conv; -} - -// convert float to string with +1234.5 format -char *ftostr51(const float &x) -{ - long xx=x*10; - conv[0]=(xx>=0)?'+':'-'; - xx=abs(xx); - conv[1]=(xx/10000)%10+'0'; - conv[2]=(xx/1000)%10+'0'; - conv[3]=(xx/100)%10+'0'; - conv[4]=(xx/10)%10+'0'; - conv[5]='.'; - conv[6]=(xx)%10+'0'; - conv[7]=0; - return conv; -} - -// convert float to string with +123.45 format -char *ftostr52(const float &x) -{ - long xx=x*100; - conv[0]=(xx>=0)?'+':'-'; - xx=abs(xx); - conv[1]=(xx/10000)%10+'0'; - conv[2]=(xx/1000)%10+'0'; - conv[3]=(xx/100)%10+'0'; - conv[4]='.'; - conv[5]=(xx/10)%10+'0'; - conv[6]=(xx)%10+'0'; - conv[7]=0; - return conv; -} - -// Callback for after editing PID i value -// grab the PID i value out of the temp variable; scale it; then update the PID driver -void copy_and_scalePID_i() -{ -#ifdef PIDTEMP - Ki = scalePID_i(raw_Ki); - updatePID(); -#endif -} - -// Callback for after editing PID d value -// grab the PID d value out of the temp variable; scale it; then update the PID driver -void copy_and_scalePID_d() -{ -#ifdef PIDTEMP - Kd = scalePID_d(raw_Kd); - updatePID(); -#endif -} - -#endif //ULTRA_LCD + } + +#ifdef ULTIPANEL_FEEDMULTIPLY + // Dead zone at 100% feedrate + if ((feedmultiply < 100 && (feedmultiply + int(encoderPosition)) > 100) || + (feedmultiply > 100 && (feedmultiply + int(encoderPosition)) < 100)) + { + encoderPosition = 0; + feedmultiply = 100; + } + + if (feedmultiply == 100 && int(encoderPosition) > ENCODER_FEEDRATE_DEADZONE) + { + feedmultiply += int(encoderPosition) - ENCODER_FEEDRATE_DEADZONE; + encoderPosition = 0; + } + else if (feedmultiply == 100 && int(encoderPosition) < -ENCODER_FEEDRATE_DEADZONE) + { + feedmultiply += int(encoderPosition) + ENCODER_FEEDRATE_DEADZONE; + encoderPosition = 0; + } + else if (feedmultiply != 100) + { + feedmultiply += int(encoderPosition); + encoderPosition = 0; + } +#endif//ULTIPANEL_FEEDMULTIPLY + + if (feedmultiply < 10) + feedmultiply = 10; + if (feedmultiply > 999) + feedmultiply = 999; +#endif//ULTIPANEL +} + +#ifdef ULTIPANEL +static void lcd_return_to_status() +{ + encoderPosition = 0; + currentMenu = lcd_status_screen; +} + +static void lcd_sdcard_pause() +{ + card.pauseSDPrint(); +} +static void lcd_sdcard_resume() +{ + card.startFileprint(); +} + +static void lcd_sdcard_stop() +{ + card.sdprinting = false; + card.closefile(); + quickStop(); + if(SD_FINISHED_STEPPERRELEASE) + { + enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND)); + } + autotempShutdown(); +} + +/* Menu implementation */ +static void lcd_main_menu() +{ + START_MENU(); + MENU_ITEM(back, MSG_WATCH, lcd_status_screen); + if (movesplanned() || IS_SD_PRINTING) + { + MENU_ITEM(submenu, MSG_TUNE, lcd_tune_menu); + }else{ + MENU_ITEM(submenu, MSG_PREPARE, lcd_prepare_menu); + } + MENU_ITEM(submenu, MSG_CONTROL, lcd_control_menu); +#ifdef SDSUPPORT + if (card.cardOK) + { + if (card.isFileOpen()) + { + if (card.sdprinting) + MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_sdcard_pause); + else + MENU_ITEM(function, MSG_RESUME_PRINT, lcd_sdcard_resume); + MENU_ITEM(function, MSG_STOP_PRINT, lcd_sdcard_stop); + }else{ + MENU_ITEM(submenu, MSG_CARD_MENU, lcd_sdcard_menu); +#if SDCARDDETECT < 1 + MENU_ITEM(gcode, MSG_CNG_SDCARD, PSTR("M21")); // SD-card changed by user +#endif + } + }else{ + MENU_ITEM(submenu, MSG_NO_CARD, lcd_sdcard_menu); +#if SDCARDDETECT < 1 + MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); // Manually initialize the SD-card via user interface +#endif + } +#endif + END_MENU(); +} + +#ifdef SDSUPPORT +static void lcd_autostart_sd() +{ + card.lastnr=0; + card.setroot(); + card.checkautostart(true); +} +#endif + +#ifdef BABYSTEPPING +static void lcd_babystep_x() +{ + if (encoderPosition != 0) + { + babystepsTodo[X_AXIS]+=(int)encoderPosition; + encoderPosition=0; + lcdDrawUpdate = 1; + } + if (lcdDrawUpdate) + { + lcd_implementation_drawedit(PSTR(MSG_BABYSTEPPING_X),""); + } + if (LCD_CLICKED) + { + lcd_quick_feedback(); + currentMenu = lcd_tune_menu; + encoderPosition = 0; + } +} + +static void lcd_babystep_y() +{ + if (encoderPosition != 0) + { + babystepsTodo[Y_AXIS]+=(int)encoderPosition; + encoderPosition=0; + lcdDrawUpdate = 1; + } + if (lcdDrawUpdate) + { + lcd_implementation_drawedit(PSTR(MSG_BABYSTEPPING_Y),""); + } + if (LCD_CLICKED) + { + lcd_quick_feedback(); + currentMenu = lcd_tune_menu; + encoderPosition = 0; + } +} + +static void lcd_babystep_z() +{ + if (encoderPosition != 0) + { + babystepsTodo[Z_AXIS]+=BABYSTEP_Z_MULTIPLICATOR*(int)encoderPosition; + encoderPosition=0; + lcdDrawUpdate = 1; + } + if (lcdDrawUpdate) + { + lcd_implementation_drawedit(PSTR(MSG_BABYSTEPPING_Z),""); + } + if (LCD_CLICKED) + { + lcd_quick_feedback(); + currentMenu = lcd_tune_menu; + encoderPosition = 0; + } +} +#endif //BABYSTEPPING + +static void lcd_tune_menu() +{ + START_MENU(); + MENU_ITEM(back, MSG_MAIN, lcd_main_menu); + MENU_ITEM_EDIT(int3, MSG_SPEED, &feedmultiply, 10, 999); + MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15); +#if TEMP_SENSOR_1 != 0 + MENU_ITEM_EDIT(int3, MSG_NOZZLE1, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15); +#endif +#if TEMP_SENSOR_2 != 0 + MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15); +#endif +#if TEMP_SENSOR_BED != 0 + MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15); +#endif + MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255); + MENU_ITEM_EDIT(int3, MSG_FLOW, &extrudemultiply, 10, 999); + MENU_ITEM_EDIT(int3, MSG_FLOW0, &extruder_multiply[0], 10, 999); +#if TEMP_SENSOR_1 != 0 + MENU_ITEM_EDIT(int3, MSG_FLOW1, &extruder_multiply[1], 10, 999); +#endif +#if TEMP_SENSOR_2 != 0 + MENU_ITEM_EDIT(int3, MSG_FLOW2, &extruder_multiply[2], 10, 999); +#endif + +#ifdef BABYSTEPPING + #ifdef BABYSTEP_XY + MENU_ITEM(submenu, MSG_BABYSTEP_X, lcd_babystep_x); + MENU_ITEM(submenu, MSG_BABYSTEP_Y, lcd_babystep_y); + #endif //BABYSTEP_XY + MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_babystep_z); +#endif +#ifdef FILAMENTCHANGEENABLE + MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600")); +#endif + END_MENU(); +} + +void lcd_preheat_pla0() +{ + setTargetHotend0(plaPreheatHotendTemp); + setTargetBed(plaPreheatHPBTemp); + fanSpeed = plaPreheatFanSpeed; + lcd_return_to_status(); + setWatch(); // heater sanity check timer +} + +void lcd_preheat_abs0() +{ + setTargetHotend0(absPreheatHotendTemp); + setTargetBed(absPreheatHPBTemp); + fanSpeed = absPreheatFanSpeed; + lcd_return_to_status(); + setWatch(); // heater sanity check timer +} + +#if TEMP_SENSOR_1 != 0 //2nd extruder preheat +void lcd_preheat_pla1() +{ + setTargetHotend1(plaPreheatHotendTemp); + setTargetBed(plaPreheatHPBTemp); + fanSpeed = plaPreheatFanSpeed; + lcd_return_to_status(); + setWatch(); // heater sanity check timer +} + +void lcd_preheat_abs1() +{ + setTargetHotend1(absPreheatHotendTemp); + setTargetBed(absPreheatHPBTemp); + fanSpeed = absPreheatFanSpeed; + lcd_return_to_status(); + setWatch(); // heater sanity check timer +} +#endif //2nd extruder preheat + +#if TEMP_SENSOR_2 != 0 //3 extruder preheat +void lcd_preheat_pla2() +{ + setTargetHotend2(plaPreheatHotendTemp); + setTargetBed(plaPreheatHPBTemp); + fanSpeed = plaPreheatFanSpeed; + lcd_return_to_status(); + setWatch(); // heater sanity check timer +} + +void lcd_preheat_abs2() +{ + setTargetHotend2(absPreheatHotendTemp); + setTargetBed(absPreheatHPBTemp); + fanSpeed = absPreheatFanSpeed; + lcd_return_to_status(); + setWatch(); // heater sanity check timer +} +#endif //3 extruder preheat + +#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //more than one extruder present +void lcd_preheat_pla012() +{ + setTargetHotend0(plaPreheatHotendTemp); + setTargetHotend1(plaPreheatHotendTemp); + setTargetHotend2(plaPreheatHotendTemp); + setTargetBed(plaPreheatHPBTemp); + fanSpeed = plaPreheatFanSpeed; + lcd_return_to_status(); + setWatch(); // heater sanity check timer +} + +void lcd_preheat_abs012() +{ + setTargetHotend0(absPreheatHotendTemp); + setTargetHotend1(absPreheatHotendTemp); + setTargetHotend2(absPreheatHotendTemp); + setTargetBed(absPreheatHPBTemp); + fanSpeed = absPreheatFanSpeed; + lcd_return_to_status(); + setWatch(); // heater sanity check timer +} +#endif //more than one extruder present + +void lcd_preheat_pla_bedonly() +{ + setTargetBed(plaPreheatHPBTemp); + fanSpeed = plaPreheatFanSpeed; + lcd_return_to_status(); + setWatch(); // heater sanity check timer +} + +void lcd_preheat_abs_bedonly() +{ + setTargetBed(absPreheatHPBTemp); + fanSpeed = absPreheatFanSpeed; + lcd_return_to_status(); + setWatch(); // heater sanity check timer +} + +static void lcd_preheat_pla_menu() +{ + START_MENU(); + MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu); + MENU_ITEM(function, MSG_PREHEAT_PLA0, lcd_preheat_pla0); +#if TEMP_SENSOR_1 != 0 //2 extruder preheat + MENU_ITEM(function, MSG_PREHEAT_PLA1, lcd_preheat_pla1); +#endif //2 extruder preheat +#if TEMP_SENSOR_2 != 0 //3 extruder preheat + MENU_ITEM(function, MSG_PREHEAT_PLA2, lcd_preheat_pla2); +#endif //3 extruder preheat +#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //all extruder preheat + MENU_ITEM(function, MSG_PREHEAT_PLA012, lcd_preheat_pla012); +#endif //2 extruder preheat +#if TEMP_SENSOR_BED != 0 + MENU_ITEM(function, MSG_PREHEAT_PLA_BEDONLY, lcd_preheat_pla_bedonly); +#endif + END_MENU(); +} + +static void lcd_preheat_abs_menu() +{ + START_MENU(); + MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu); + MENU_ITEM(function, MSG_PREHEAT_ABS0, lcd_preheat_abs0); +#if TEMP_SENSOR_1 != 0 //2 extruder preheat + MENU_ITEM(function, MSG_PREHEAT_ABS1, lcd_preheat_abs1); +#endif //2 extruder preheat +#if TEMP_SENSOR_2 != 0 //3 extruder preheat + MENU_ITEM(function, MSG_PREHEAT_ABS2, lcd_preheat_abs2); +#endif //3 extruder preheat +#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //all extruder preheat + MENU_ITEM(function, MSG_PREHEAT_ABS012, lcd_preheat_abs012); +#endif //2 extruder preheat +#if TEMP_SENSOR_BED != 0 + MENU_ITEM(function, MSG_PREHEAT_ABS_BEDONLY, lcd_preheat_abs_bedonly); +#endif + END_MENU(); +} + +void lcd_cooldown() +{ + setTargetHotend0(0); + setTargetHotend1(0); + setTargetHotend2(0); + setTargetBed(0); + fanSpeed = 0; + lcd_return_to_status(); +} + +static void lcd_prepare_menu() +{ + START_MENU(); + MENU_ITEM(back, MSG_MAIN, lcd_main_menu); +#ifdef SDSUPPORT + #ifdef MENU_ADDAUTOSTART + MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd); + #endif +#endif + MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84")); + MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28")); + //MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0")); +#if TEMP_SENSOR_0 != 0 + #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_BED != 0 + MENU_ITEM(submenu, MSG_PREHEAT_PLA, lcd_preheat_pla_menu); + MENU_ITEM(submenu, MSG_PREHEAT_ABS, lcd_preheat_abs_menu); + #else + MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla0); + MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs0); + #endif +#endif + MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown); +#if PS_ON_PIN > -1 + if (powersupply) + { + MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81")); + }else{ + MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80")); + } +#endif + MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu); + END_MENU(); +} + +float move_menu_scale; +static void lcd_move_menu_axis(); + +static void lcd_move_x() +{ + if (encoderPosition != 0) + { + refresh_cmd_timeout(); + current_position[X_AXIS] += float((int)encoderPosition) * move_menu_scale; + if (min_software_endstops && current_position[X_AXIS] < X_MIN_POS) + current_position[X_AXIS] = X_MIN_POS; + if (max_software_endstops && current_position[X_AXIS] > X_MAX_POS) + current_position[X_AXIS] = X_MAX_POS; + encoderPosition = 0; + #ifdef DELTA + calculate_delta(current_position); + plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS], manual_feedrate[X_AXIS]/60, active_extruder); + #else + plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[X_AXIS]/60, active_extruder); + #endif + lcdDrawUpdate = 1; + } + if (lcdDrawUpdate) + { + lcd_implementation_drawedit(PSTR("X"), ftostr31(current_position[X_AXIS])); + } + if (LCD_CLICKED) + { + lcd_quick_feedback(); + currentMenu = lcd_move_menu_axis; + encoderPosition = 0; + } +} +static void lcd_move_y() +{ + if (encoderPosition != 0) + { + refresh_cmd_timeout(); + current_position[Y_AXIS] += float((int)encoderPosition) * move_menu_scale; + if (min_software_endstops && current_position[Y_AXIS] < Y_MIN_POS) + current_position[Y_AXIS] = Y_MIN_POS; + if (max_software_endstops && current_position[Y_AXIS] > Y_MAX_POS) + current_position[Y_AXIS] = Y_MAX_POS; + encoderPosition = 0; + #ifdef DELTA + calculate_delta(current_position); + plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS], manual_feedrate[Y_AXIS]/60, active_extruder); + #else + plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[Y_AXIS]/60, active_extruder); + #endif + lcdDrawUpdate = 1; + } + if (lcdDrawUpdate) + { + lcd_implementation_drawedit(PSTR("Y"), ftostr31(current_position[Y_AXIS])); + } + if (LCD_CLICKED) + { + lcd_quick_feedback(); + currentMenu = lcd_move_menu_axis; + encoderPosition = 0; + } +} +static void lcd_move_z() +{ + if (encoderPosition != 0) + { + refresh_cmd_timeout(); + current_position[Z_AXIS] += float((int)encoderPosition) * move_menu_scale; + if (min_software_endstops && current_position[Z_AXIS] < Z_MIN_POS) + current_position[Z_AXIS] = Z_MIN_POS; + if (max_software_endstops && current_position[Z_AXIS] > Z_MAX_POS) + current_position[Z_AXIS] = Z_MAX_POS; + encoderPosition = 0; + #ifdef DELTA + calculate_delta(current_position); + plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS], manual_feedrate[Z_AXIS]/60, active_extruder); + #else + plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[Z_AXIS]/60, active_extruder); + #endif + lcdDrawUpdate = 1; + } + if (lcdDrawUpdate) + { + lcd_implementation_drawedit(PSTR("Z"), ftostr31(current_position[Z_AXIS])); + } + if (LCD_CLICKED) + { + lcd_quick_feedback(); + currentMenu = lcd_move_menu_axis; + encoderPosition = 0; + } +} +static void lcd_move_e() +{ + if (encoderPosition != 0) + { + current_position[E_AXIS] += float((int)encoderPosition) * move_menu_scale; + encoderPosition = 0; + #ifdef DELTA + calculate_delta(current_position); + plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS], manual_feedrate[E_AXIS]/60, active_extruder); + #else + plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[E_AXIS]/60, active_extruder); + #endif + lcdDrawUpdate = 1; + } + if (lcdDrawUpdate) + { + lcd_implementation_drawedit(PSTR("Extruder"), ftostr31(current_position[E_AXIS])); + } + if (LCD_CLICKED) + { + lcd_quick_feedback(); + currentMenu = lcd_move_menu_axis; + encoderPosition = 0; + } +} + +static void lcd_move_menu_axis() +{ + START_MENU(); + MENU_ITEM(back, MSG_MOVE_AXIS, lcd_move_menu); + MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_x); + MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_y); + if (move_menu_scale < 10.0) + { + MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_z); + MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e); + } + END_MENU(); +} + +static void lcd_move_menu_10mm() +{ + move_menu_scale = 10.0; + lcd_move_menu_axis(); +} +static void lcd_move_menu_1mm() +{ + move_menu_scale = 1.0; + lcd_move_menu_axis(); +} +static void lcd_move_menu_01mm() +{ + move_menu_scale = 0.1; + lcd_move_menu_axis(); +} + +static void lcd_move_menu() +{ + START_MENU(); + MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu); + MENU_ITEM(submenu, MSG_MOVE_10MM, lcd_move_menu_10mm); + MENU_ITEM(submenu, MSG_MOVE_1MM, lcd_move_menu_1mm); + MENU_ITEM(submenu, MSG_MOVE_01MM, lcd_move_menu_01mm); + //TODO:X,Y,Z,E + END_MENU(); +} + +static void lcd_control_menu() +{ + START_MENU(); + MENU_ITEM(back, MSG_MAIN, lcd_main_menu); + MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu); + MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu); +#ifdef DOGLCD +// MENU_ITEM_EDIT(int3, MSG_CONTRAST, &lcd_contrast, 0, 63); + MENU_ITEM(submenu, MSG_CONTRAST, lcd_set_contrast); +#endif +#ifdef FWRETRACT + MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu); +#endif +#ifdef EEPROM_SETTINGS + MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); + MENU_ITEM(function, MSG_LOAD_EPROM, Config_RetrieveSettings); +#endif + MENU_ITEM(function, MSG_RESTORE_FAILSAFE, Config_ResetDefault); + END_MENU(); +} + +static void lcd_control_temperature_menu() +{ +#ifdef PIDTEMP + // set up temp variables - undo the default scaling + raw_Ki = unscalePID_i(Ki); + raw_Kd = unscalePID_d(Kd); +#endif + + START_MENU(); + MENU_ITEM(back, MSG_CONTROL, lcd_control_menu); + MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15); +#if TEMP_SENSOR_1 != 0 + MENU_ITEM_EDIT(int3, MSG_NOZZLE1, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15); +#endif +#if TEMP_SENSOR_2 != 0 + MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15); +#endif +#if TEMP_SENSOR_BED != 0 + MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15); +#endif + MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255); +#ifdef AUTOTEMP + MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled); + MENU_ITEM_EDIT(float3, MSG_MIN, &autotemp_min, 0, HEATER_0_MAXTEMP - 15); + MENU_ITEM_EDIT(float3, MSG_MAX, &autotemp_max, 0, HEATER_0_MAXTEMP - 15); + MENU_ITEM_EDIT(float32, MSG_FACTOR, &autotemp_factor, 0.0, 1.0); +#endif +#ifdef PIDTEMP + MENU_ITEM_EDIT(float52, MSG_PID_P, &Kp, 1, 9990); + // i is typically a small value so allows values below 1 + MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I, &raw_Ki, 0.01, 9990, copy_and_scalePID_i); + MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D, &raw_Kd, 1, 9990, copy_and_scalePID_d); +# ifdef PID_ADD_EXTRUSION_RATE + MENU_ITEM_EDIT(float3, MSG_PID_C, &Kc, 1, 9990); +# endif//PID_ADD_EXTRUSION_RATE +#endif//PIDTEMP + MENU_ITEM(submenu, MSG_PREHEAT_PLA_SETTINGS, lcd_control_temperature_preheat_pla_settings_menu); + MENU_ITEM(submenu, MSG_PREHEAT_ABS_SETTINGS, lcd_control_temperature_preheat_abs_settings_menu); + END_MENU(); +} + +static void lcd_control_temperature_preheat_pla_settings_menu() +{ + START_MENU(); + MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu); + MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &plaPreheatFanSpeed, 0, 255); + MENU_ITEM_EDIT(int3, MSG_NOZZLE, &plaPreheatHotendTemp, 0, HEATER_0_MAXTEMP - 15); +#if TEMP_SENSOR_BED != 0 + MENU_ITEM_EDIT(int3, MSG_BED, &plaPreheatHPBTemp, 0, BED_MAXTEMP - 15); +#endif +#ifdef EEPROM_SETTINGS + MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); +#endif + END_MENU(); +} + +static void lcd_control_temperature_preheat_abs_settings_menu() +{ + START_MENU(); + MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu); + MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &absPreheatFanSpeed, 0, 255); + MENU_ITEM_EDIT(int3, MSG_NOZZLE, &absPreheatHotendTemp, 0, HEATER_0_MAXTEMP - 15); +#if TEMP_SENSOR_BED != 0 + MENU_ITEM_EDIT(int3, MSG_BED, &absPreheatHPBTemp, 0, BED_MAXTEMP - 15); +#endif +#ifdef EEPROM_SETTINGS + MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); +#endif + END_MENU(); +} + +static void lcd_control_motion_menu() +{ + START_MENU(); + MENU_ITEM(back, MSG_CONTROL, lcd_control_menu); +#ifdef ENABLE_AUTO_BED_LEVELING + MENU_ITEM_EDIT(float32, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, 0.5, 50); +#endif + MENU_ITEM_EDIT(float5, MSG_ACC, &acceleration, 500, 99000); + MENU_ITEM_EDIT(float3, MSG_VXY_JERK, &max_xy_jerk, 1, 990); + MENU_ITEM_EDIT(float52, MSG_VZ_JERK, &max_z_jerk, 0.1, 990); + MENU_ITEM_EDIT(float3, MSG_VE_JERK, &max_e_jerk, 1, 990); + MENU_ITEM_EDIT(float3, MSG_VMAX MSG_X, &max_feedrate[X_AXIS], 1, 999); + MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Y, &max_feedrate[Y_AXIS], 1, 999); + MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Z, &max_feedrate[Z_AXIS], 1, 999); + MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &max_feedrate[E_AXIS], 1, 999); + MENU_ITEM_EDIT(float3, MSG_VMIN, &minimumfeedrate, 0, 999); + MENU_ITEM_EDIT(float3, MSG_VTRAV_MIN, &mintravelfeedrate, 0, 999); + MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_X, &max_acceleration_units_per_sq_second[X_AXIS], 100, 99000, reset_acceleration_rates); + MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Y, &max_acceleration_units_per_sq_second[Y_AXIS], 100, 99000, reset_acceleration_rates); + MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Z, &max_acceleration_units_per_sq_second[Z_AXIS], 100, 99000, reset_acceleration_rates); + MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &max_acceleration_units_per_sq_second[E_AXIS], 100, 99000, reset_acceleration_rates); + MENU_ITEM_EDIT(float5, MSG_A_RETRACT, &retract_acceleration, 100, 99000); + MENU_ITEM_EDIT(float52, MSG_XSTEPS, &axis_steps_per_unit[X_AXIS], 5, 9999); + MENU_ITEM_EDIT(float52, MSG_YSTEPS, &axis_steps_per_unit[Y_AXIS], 5, 9999); + MENU_ITEM_EDIT(float51, MSG_ZSTEPS, &axis_steps_per_unit[Z_AXIS], 5, 9999); + MENU_ITEM_EDIT(float51, MSG_ESTEPS, &axis_steps_per_unit[E_AXIS], 5, 9999); +#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + MENU_ITEM_EDIT(bool, MSG_ENDSTOP_ABORT, &abort_on_endstop_hit); +#endif +#ifdef SCARA + MENU_ITEM_EDIT(float74, MSG_XSCALE, &axis_scaling[X_AXIS],0.5,2); + MENU_ITEM_EDIT(float74, MSG_YSCALE, &axis_scaling[Y_AXIS],0.5,2); +#endif + END_MENU(); +} + +#ifdef DOGLCD +static void lcd_set_contrast() +{ + if (encoderPosition != 0) + { + lcd_contrast -= encoderPosition; + if (lcd_contrast < 0) lcd_contrast = 0; + else if (lcd_contrast > 63) lcd_contrast = 63; + encoderPosition = 0; + lcdDrawUpdate = 1; + u8g.setContrast(lcd_contrast); + } + if (lcdDrawUpdate) + { + lcd_implementation_drawedit(PSTR(MSG_CONTRAST), itostr2(lcd_contrast)); + } + if (LCD_CLICKED) + { + lcd_quick_feedback(); + currentMenu = lcd_control_menu; + encoderPosition = 0; + } +} +#endif + +#ifdef FWRETRACT +static void lcd_control_retract_menu() +{ + START_MENU(); + MENU_ITEM(back, MSG_CONTROL, lcd_control_menu); + MENU_ITEM_EDIT(bool, MSG_AUTORETRACT, &autoretract_enabled); + MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT, &retract_length, 0, 100); + MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &retract_feedrate, 1, 999); + MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_ZLIFT, &retract_zlift, 0, 999); + MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER, &retract_recover_length, 0, 100); + MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &retract_recover_feedrate, 1, 999); + END_MENU(); +} +#endif + +#if SDCARDDETECT == -1 +static void lcd_sd_refresh() +{ + card.initsd(); + currentMenuViewOffset = 0; +} +#endif +static void lcd_sd_updir() +{ + card.updir(); + currentMenuViewOffset = 0; +} + +void lcd_sdcard_menu() +{ + if (lcdDrawUpdate == 0 && LCD_CLICKED == 0) + return; // nothing to do (so don't thrash the SD card) + uint16_t fileCnt = card.getnrfilenames(); + START_MENU(); + MENU_ITEM(back, MSG_MAIN, lcd_main_menu); + card.getWorkDirName(); + if(card.filename[0]=='/') + { +#if SDCARDDETECT == -1 + MENU_ITEM(function, LCD_STR_REFRESH MSG_REFRESH, lcd_sd_refresh); +#endif + }else{ + MENU_ITEM(function, LCD_STR_FOLDER "..", lcd_sd_updir); + } + + for(uint16_t i=0;i maxEditValue) \ + encoderPosition = maxEditValue; \ + if (lcdDrawUpdate) \ + lcd_implementation_drawedit(editLabel, _strFunc(((_type)encoderPosition) / scale)); \ + if (LCD_CLICKED) \ + { \ + *((_type*)editValue) = ((_type)encoderPosition) / scale; \ + lcd_quick_feedback(); \ + currentMenu = prevMenu; \ + encoderPosition = prevEncoderPosition; \ + } \ + } \ + void menu_edit_callback_ ## _name () \ + { \ + if ((int32_t)encoderPosition < minEditValue) \ + encoderPosition = minEditValue; \ + if ((int32_t)encoderPosition > maxEditValue) \ + encoderPosition = maxEditValue; \ + if (lcdDrawUpdate) \ + lcd_implementation_drawedit(editLabel, _strFunc(((_type)encoderPosition) / scale)); \ + if (LCD_CLICKED) \ + { \ + *((_type*)editValue) = ((_type)encoderPosition) / scale; \ + lcd_quick_feedback(); \ + currentMenu = prevMenu; \ + encoderPosition = prevEncoderPosition; \ + (*callbackFunc)();\ + } \ + } \ + static void menu_action_setting_edit_ ## _name (const char* pstr, _type* ptr, _type minValue, _type maxValue) \ + { \ + prevMenu = currentMenu; \ + prevEncoderPosition = encoderPosition; \ + \ + lcdDrawUpdate = 2; \ + currentMenu = menu_edit_ ## _name; \ + \ + editLabel = pstr; \ + editValue = ptr; \ + minEditValue = minValue * scale; \ + maxEditValue = maxValue * scale; \ + encoderPosition = (*ptr) * scale; \ + }\ + static void menu_action_setting_edit_callback_ ## _name (const char* pstr, _type* ptr, _type minValue, _type maxValue, menuFunc_t callback) \ + { \ + prevMenu = currentMenu; \ + prevEncoderPosition = encoderPosition; \ + \ + lcdDrawUpdate = 2; \ + currentMenu = menu_edit_callback_ ## _name; \ + \ + editLabel = pstr; \ + editValue = ptr; \ + minEditValue = minValue * scale; \ + maxEditValue = maxValue * scale; \ + encoderPosition = (*ptr) * scale; \ + callbackFunc = callback;\ + } +menu_edit_type(int, int3, itostr3, 1) +menu_edit_type(float, float3, ftostr3, 1) +menu_edit_type(float, float32, ftostr32, 100) +menu_edit_type(float, float5, ftostr5, 0.01) +menu_edit_type(float, float51, ftostr51, 10) +menu_edit_type(float, float52, ftostr52, 100) +menu_edit_type(unsigned long, long5, ftostr5, 0.01) + +#ifdef REPRAPWORLD_KEYPAD + static void reprapworld_keypad_move_z_up() { + encoderPosition = 1; + move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; + lcd_move_z(); + } + static void reprapworld_keypad_move_z_down() { + encoderPosition = -1; + move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; + lcd_move_z(); + } + static void reprapworld_keypad_move_x_left() { + encoderPosition = -1; + move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; + lcd_move_x(); + } + static void reprapworld_keypad_move_x_right() { + encoderPosition = 1; + move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; + lcd_move_x(); + } + static void reprapworld_keypad_move_y_down() { + encoderPosition = 1; + move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; + lcd_move_y(); + } + static void reprapworld_keypad_move_y_up() { + encoderPosition = -1; + move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; + lcd_move_y(); + } + static void reprapworld_keypad_move_home() { + enquecommand_P((PSTR("G28"))); // move all axis home + } +#endif + +/** End of menus **/ + +static void lcd_quick_feedback() +{ + lcdDrawUpdate = 2; + blocking_enc = millis() + 500; + lcd_implementation_quick_feedback(); +} + +/** Menu action functions **/ +static void menu_action_back(menuFunc_t data) +{ + currentMenu = data; + encoderPosition = 0; +} +static void menu_action_submenu(menuFunc_t data) +{ + currentMenu = data; + encoderPosition = 0; +} +static void menu_action_gcode(const char* pgcode) +{ + enquecommand_P(pgcode); +} +static void menu_action_function(menuFunc_t data) +{ + (*data)(); +} +static void menu_action_sdfile(const char* filename, char* longFilename) +{ + char cmd[30]; + char* c; + sprintf_P(cmd, PSTR("M23 %s"), filename); + for(c = &cmd[4]; *c; c++) + *c = tolower(*c); + enquecommand(cmd); + enquecommand_P(PSTR("M24")); + lcd_return_to_status(); +} +static void menu_action_sddirectory(const char* filename, char* longFilename) +{ + card.chdir(filename); + encoderPosition = 0; +} +static void menu_action_setting_edit_bool(const char* pstr, bool* ptr) +{ + *ptr = !(*ptr); +} +#endif//ULTIPANEL + +/** LCD API **/ +void lcd_init() +{ + lcd_implementation_init(); + +#ifdef NEWPANEL + pinMode(BTN_EN1,INPUT); + pinMode(BTN_EN2,INPUT); + WRITE(BTN_EN1,HIGH); + WRITE(BTN_EN2,HIGH); + #if BTN_ENC > 0 + pinMode(BTN_ENC,INPUT); + WRITE(BTN_ENC,HIGH); + #endif + #ifdef REPRAPWORLD_KEYPAD + pinMode(SHIFT_CLK,OUTPUT); + pinMode(SHIFT_LD,OUTPUT); + pinMode(SHIFT_OUT,INPUT); + WRITE(SHIFT_OUT,HIGH); + WRITE(SHIFT_LD,HIGH); + #endif +#else // Not NEWPANEL + #ifdef SR_LCD_2W_NL // Non latching 2 wire shift register + pinMode (SR_DATA_PIN, OUTPUT); + pinMode (SR_CLK_PIN, OUTPUT); + #elif defined(SHIFT_CLK) + pinMode(SHIFT_CLK,OUTPUT); + pinMode(SHIFT_LD,OUTPUT); + pinMode(SHIFT_EN,OUTPUT); + pinMode(SHIFT_OUT,INPUT); + WRITE(SHIFT_OUT,HIGH); + WRITE(SHIFT_LD,HIGH); + WRITE(SHIFT_EN,LOW); + #else + #ifdef ULTIPANEL + #error ULTIPANEL requires an encoder + #endif + #endif // SR_LCD_2W_NL +#endif//!NEWPANEL + +#if defined (SDSUPPORT) && defined(SDCARDDETECT) && (SDCARDDETECT > 0) + pinMode(SDCARDDETECT,INPUT); + WRITE(SDCARDDETECT, HIGH); + lcd_oldcardstatus = IS_SD_INSERTED; +#endif//(SDCARDDETECT > 0) +#ifdef LCD_HAS_SLOW_BUTTONS + slow_buttons = 0; +#endif + lcd_buttons_update(); +#ifdef ULTIPANEL + encoderDiff = 0; +#endif +} + +void lcd_update() +{ + static unsigned long timeoutToStatus = 0; + + #ifdef LCD_HAS_SLOW_BUTTONS + slow_buttons = lcd_implementation_read_slow_buttons(); // buttons which take too long to read in interrupt context + #endif + + lcd_buttons_update(); + + #if (SDCARDDETECT > 0) + if((IS_SD_INSERTED != lcd_oldcardstatus)) + { + lcdDrawUpdate = 2; + lcd_oldcardstatus = IS_SD_INSERTED; + lcd_implementation_init(); // to maybe revive the LCD if static electricity killed it. + + if(lcd_oldcardstatus) + { + card.initsd(); + LCD_MESSAGEPGM(MSG_SD_INSERTED); + } + else + { + card.release(); + LCD_MESSAGEPGM(MSG_SD_REMOVED); + } + } + #endif//CARDINSERTED + + if (lcd_next_update_millis < millis()) + { +#ifdef ULTIPANEL + #ifdef REPRAPWORLD_KEYPAD + if (REPRAPWORLD_KEYPAD_MOVE_Z_UP) { + reprapworld_keypad_move_z_up(); + } + if (REPRAPWORLD_KEYPAD_MOVE_Z_DOWN) { + reprapworld_keypad_move_z_down(); + } + if (REPRAPWORLD_KEYPAD_MOVE_X_LEFT) { + reprapworld_keypad_move_x_left(); + } + if (REPRAPWORLD_KEYPAD_MOVE_X_RIGHT) { + reprapworld_keypad_move_x_right(); + } + if (REPRAPWORLD_KEYPAD_MOVE_Y_DOWN) { + reprapworld_keypad_move_y_down(); + } + if (REPRAPWORLD_KEYPAD_MOVE_Y_UP) { + reprapworld_keypad_move_y_up(); + } + if (REPRAPWORLD_KEYPAD_MOVE_HOME) { + reprapworld_keypad_move_home(); + } + #endif + if (abs(encoderDiff) >= ENCODER_PULSES_PER_STEP) + { + lcdDrawUpdate = 1; + encoderPosition += encoderDiff / ENCODER_PULSES_PER_STEP; + encoderDiff = 0; + timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS; + } + if (LCD_CLICKED) + timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS; +#endif//ULTIPANEL + +#ifdef DOGLCD // Changes due to different driver architecture of the DOGM display + blink++; // Variable for fan animation and alive dot + u8g.firstPage(); + do + { + u8g.setFont(u8g_font_6x10_marlin); + u8g.setPrintPos(125,0); + if (blink % 2) u8g.setColorIndex(1); else u8g.setColorIndex(0); // Set color for the alive dot + u8g.drawPixel(127,63); // draw alive dot + u8g.setColorIndex(1); // black on white + (*currentMenu)(); + if (!lcdDrawUpdate) break; // Terminate display update, when nothing new to draw. This must be done before the last dogm.next() + } while( u8g.nextPage() ); +#else + (*currentMenu)(); +#endif + +#ifdef LCD_HAS_STATUS_INDICATORS + lcd_implementation_update_indicators(); +#endif + +#ifdef ULTIPANEL + if(timeoutToStatus < millis() && currentMenu != lcd_status_screen) + { + lcd_return_to_status(); + lcdDrawUpdate = 2; + } +#endif//ULTIPANEL + if (lcdDrawUpdate == 2) + lcd_implementation_clear(); + if (lcdDrawUpdate) + lcdDrawUpdate--; + lcd_next_update_millis = millis() + 100; + } +} + +void lcd_setstatus(const char* message) +{ + if (lcd_status_message_level > 0) + return; + strncpy(lcd_status_message, message, LCD_WIDTH); + lcdDrawUpdate = 2; +} +void lcd_setstatuspgm(const char* message) +{ + if (lcd_status_message_level > 0) + return; + strncpy_P(lcd_status_message, message, LCD_WIDTH); + lcdDrawUpdate = 2; +} +void lcd_setalertstatuspgm(const char* message) +{ + lcd_setstatuspgm(message); + lcd_status_message_level = 1; +#ifdef ULTIPANEL + lcd_return_to_status(); +#endif//ULTIPANEL +} +void lcd_reset_alert_level() +{ + lcd_status_message_level = 0; +} + +#ifdef DOGLCD +void lcd_setcontrast(uint8_t value) +{ + lcd_contrast = value & 63; + u8g.setContrast(lcd_contrast); +} +#endif + +#ifdef ULTIPANEL +/* Warning: This function is called from interrupt context */ +void lcd_buttons_update() +{ +#ifdef NEWPANEL + uint8_t newbutton=0; + if(READ(BTN_EN1)==0) newbutton|=EN_A; + if(READ(BTN_EN2)==0) newbutton|=EN_B; + #if BTN_ENC > 0 + if((blocking_enc>1; + if(READ(SHIFT_OUT)) + newbutton_reprapworld_keypad|=(1<<7); + WRITE(SHIFT_CLK,HIGH); + WRITE(SHIFT_CLK,LOW); + } + buttons_reprapworld_keypad=~newbutton_reprapworld_keypad; //invert it, because a pressed switch produces a logical 0 + #endif +#else //read it from the shift register + uint8_t newbutton=0; + WRITE(SHIFT_LD,LOW); + WRITE(SHIFT_LD,HIGH); + unsigned char tmp_buttons=0; + for(int8_t i=0;i<8;i++) + { + newbutton = newbutton>>1; + if(READ(SHIFT_OUT)) + newbutton|=(1<<7); + WRITE(SHIFT_CLK,HIGH); + WRITE(SHIFT_CLK,LOW); + } + buttons=~newbutton; //invert it, because a pressed switch produces a logical 0 +#endif//!NEWPANEL + + //manage encoder rotation + uint8_t enc=0; + if(buttons&EN_A) + enc|=(1<<0); + if(buttons&EN_B) + enc|=(1<<1); + if(enc != lastEncoderBits) + { + switch(enc) + { + case encrot0: + if(lastEncoderBits==encrot3) + encoderDiff++; + else if(lastEncoderBits==encrot1) + encoderDiff--; + break; + case encrot1: + if(lastEncoderBits==encrot0) + encoderDiff++; + else if(lastEncoderBits==encrot2) + encoderDiff--; + break; + case encrot2: + if(lastEncoderBits==encrot1) + encoderDiff++; + else if(lastEncoderBits==encrot3) + encoderDiff--; + break; + case encrot3: + if(lastEncoderBits==encrot2) + encoderDiff++; + else if(lastEncoderBits==encrot0) + encoderDiff--; + break; + } + } + lastEncoderBits = enc; +} + +void lcd_buzz(long duration, uint16_t freq) +{ +#ifdef LCD_USE_I2C_BUZZER + lcd.buzz(duration,freq); +#endif +} + +bool lcd_clicked() +{ + return LCD_CLICKED; +} +#endif//ULTIPANEL + +/********************************/ +/** Float conversion utilities **/ +/********************************/ +// convert float to string with +123.4 format +char conv[8]; +char *ftostr3(const float &x) +{ + return itostr3((int)x); +} + +char *itostr2(const uint8_t &x) +{ + //sprintf(conv,"%5.1f",x); + int xx=x; + conv[0]=(xx/10)%10+'0'; + conv[1]=(xx)%10+'0'; + conv[2]=0; + return conv; +} + +// convert float to string with +123.4 format +char *ftostr31(const float &x) +{ + int xx=x*10; + conv[0]=(xx>=0)?'+':'-'; + xx=abs(xx); + conv[1]=(xx/1000)%10+'0'; + conv[2]=(xx/100)%10+'0'; + conv[3]=(xx/10)%10+'0'; + conv[4]='.'; + conv[5]=(xx)%10+'0'; + conv[6]=0; + return conv; +} + +// convert float to string with 123.4 format +char *ftostr31ns(const float &x) +{ + int xx=x*10; + //conv[0]=(xx>=0)?'+':'-'; + xx=abs(xx); + conv[0]=(xx/1000)%10+'0'; + conv[1]=(xx/100)%10+'0'; + conv[2]=(xx/10)%10+'0'; + conv[3]='.'; + conv[4]=(xx)%10+'0'; + conv[5]=0; + return conv; +} + +char *ftostr32(const float &x) +{ + long xx=x*100; + if (xx >= 0) + conv[0]=(xx/10000)%10+'0'; + else + conv[0]='-'; + xx=abs(xx); + conv[1]=(xx/1000)%10+'0'; + conv[2]=(xx/100)%10+'0'; + conv[3]='.'; + conv[4]=(xx/10)%10+'0'; + conv[5]=(xx)%10+'0'; + conv[6]=0; + return conv; +} + +char *itostr31(const int &xx) +{ + conv[0]=(xx>=0)?'+':'-'; + conv[1]=(xx/1000)%10+'0'; + conv[2]=(xx/100)%10+'0'; + conv[3]=(xx/10)%10+'0'; + conv[4]='.'; + conv[5]=(xx)%10+'0'; + conv[6]=0; + return conv; +} + +char *itostr3(const int &xx) +{ + if (xx >= 100) + conv[0]=(xx/100)%10+'0'; + else + conv[0]=' '; + if (xx >= 10) + conv[1]=(xx/10)%10+'0'; + else + conv[1]=' '; + conv[2]=(xx)%10+'0'; + conv[3]=0; + return conv; +} + +char *itostr3left(const int &xx) +{ + if (xx >= 100) + { + conv[0]=(xx/100)%10+'0'; + conv[1]=(xx/10)%10+'0'; + conv[2]=(xx)%10+'0'; + conv[3]=0; + } + else if (xx >= 10) + { + conv[0]=(xx/10)%10+'0'; + conv[1]=(xx)%10+'0'; + conv[2]=0; + } + else + { + conv[0]=(xx)%10+'0'; + conv[1]=0; + } + return conv; +} + +char *itostr4(const int &xx) +{ + if (xx >= 1000) + conv[0]=(xx/1000)%10+'0'; + else + conv[0]=' '; + if (xx >= 100) + conv[1]=(xx/100)%10+'0'; + else + conv[1]=' '; + if (xx >= 10) + conv[2]=(xx/10)%10+'0'; + else + conv[2]=' '; + conv[3]=(xx)%10+'0'; + conv[4]=0; + return conv; +} + +// convert float to string with 12345 format +char *ftostr5(const float &x) +{ + long xx=abs(x); + if (xx >= 10000) + conv[0]=(xx/10000)%10+'0'; + else + conv[0]=' '; + if (xx >= 1000) + conv[1]=(xx/1000)%10+'0'; + else + conv[1]=' '; + if (xx >= 100) + conv[2]=(xx/100)%10+'0'; + else + conv[2]=' '; + if (xx >= 10) + conv[3]=(xx/10)%10+'0'; + else + conv[3]=' '; + conv[4]=(xx)%10+'0'; + conv[5]=0; + return conv; +} + +// convert float to string with +1234.5 format +char *ftostr51(const float &x) +{ + long xx=x*10; + conv[0]=(xx>=0)?'+':'-'; + xx=abs(xx); + conv[1]=(xx/10000)%10+'0'; + conv[2]=(xx/1000)%10+'0'; + conv[3]=(xx/100)%10+'0'; + conv[4]=(xx/10)%10+'0'; + conv[5]='.'; + conv[6]=(xx)%10+'0'; + conv[7]=0; + return conv; +} + +// convert float to string with +123.45 format +char *ftostr52(const float &x) +{ + long xx=x*100; + conv[0]=(xx>=0)?'+':'-'; + xx=abs(xx); + conv[1]=(xx/10000)%10+'0'; + conv[2]=(xx/1000)%10+'0'; + conv[3]=(xx/100)%10+'0'; + conv[4]='.'; + conv[5]=(xx/10)%10+'0'; + conv[6]=(xx)%10+'0'; + conv[7]=0; + return conv; +} + +// Callback for after editing PID i value +// grab the PID i value out of the temp variable; scale it; then update the PID driver +void copy_and_scalePID_i() +{ +#ifdef PIDTEMP + Ki = scalePID_i(raw_Ki); + updatePID(); +#endif +} + +// Callback for after editing PID d value +// grab the PID d value out of the temp variable; scale it; then update the PID driver +void copy_and_scalePID_d() +{ +#ifdef PIDTEMP + Kd = scalePID_d(raw_Kd); + updatePID(); +#endif +} + +#endif //ULTRA_LCD diff --git a/README.md b/README.md index 17e920ec00..5146ef2d74 100644 --- a/README.md +++ b/README.md @@ -1,8 +1,8 @@ ========================== Marlin 3D Printer Firmware ========================== -[![Coverity Scan Build Status](https://scan.coverity.com/projects/2224/badge.svg)](https://scan.coverity.com/projects/2224) - +[![Coverity Scan Build Status](https://scan.coverity.com/projects/2224/badge.svg)](https://scan.coverity.com/projects/2224) + Marlin has a GPL license because I believe in open development. Please do not use this code in products (3D printers, CNC etc) that are closed source or are crippled by a patent. @@ -47,6 +47,7 @@ Features: * PID tuning * CoreXY kinematics (www.corexy.com/theory.html) * Delta kinematics +* SCARA kinematics * Dual X-carriage support for multiple extruder systems * Configurable serial port to support connection of wireless adaptors. * Automatic operation of extruder/cold-end cooling fans based on nozzle temperature @@ -207,15 +208,15 @@ M Codes * M140 - Set bed target temp * M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating * Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling -* M200 D- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters). +* M200 D- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters). * M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000) * M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!! * M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec * M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) im mm/sec^2 also sets minimum segment time in ms (B20000) to prevent buffer underruns and M20 minimum feedrate * M205 - advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk, E=maximum E jerk * M206 - set additional homeing offset -* M207 - set retract length S[positive mm] F[feedrate mm/min] Z[additional zlift/hop], stays in mm regardless of M200 setting -* M208 - set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/min] +* M207 - set retract length S[positive mm] F[feedrate mm/min] Z[additional zlift/hop], stays in mm regardless of M200 setting +* M208 - set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/min] * M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction. * M218 - set hotend offset (in mm): T X Y * M220 S- set speed factor override percentage