Jason Smith
4 years ago
committed by
GitHub
GitHub
23 changed files with 180 additions and 633 deletions
@ -1,396 +0,0 @@ |
|||
/*
|
|||
* SoftwareSerial.cpp (formerly NewSoftSerial.cpp) |
|||
* |
|||
* Multi-instance software serial library for Arduino/Wiring |
|||
* -- Interrupt-driven receive and other improvements by ladyada |
|||
* <https://ladyada.net>
|
|||
* -- Tuning, circular buffer, derivation from class Print/Stream, |
|||
* multi-instance support, porting to 8MHz processors, |
|||
* various optimizations, PROGMEM delay tables, inverse logic and |
|||
* direct port writing by Mikal Hart <http://www.arduiniana.org>
|
|||
* -- Pin change interrupt macros by Paul Stoffregen <https://www.pjrc.com>
|
|||
* -- 20MHz processor support by Garrett Mace <http://www.macetech.com>
|
|||
* -- ATmega1280/2560 support by Brett Hagman <https://www.roguerobotics.com>
|
|||
* -- STM32 support by Armin van der Togt |
|||
* |
|||
* This library is free software; you can redistribute it and/or |
|||
* modify it under the terms of the GNU Lesser General Public |
|||
* License as published by the Free Software Foundation; either |
|||
* version 2.1 of the License, or (at your option) any later version. |
|||
* |
|||
* This library is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
|||
* Lesser General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU Lesser General Public |
|||
* License along with this library; if not, write to the Free Software |
|||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
|||
* |
|||
* The latest version of this library can always be found at |
|||
* http://arduiniana.org.
|
|||
*/ |
|||
|
|||
//
|
|||
// Includes
|
|||
//
|
|||
#if defined(PLATFORMIO) && defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) |
|||
|
|||
#include "../../inc/MarlinConfig.h" |
|||
|
|||
#include "SoftwareSerial.h" |
|||
|
|||
#define OVERSAMPLE 3 // in RX, Timer will generate interruption OVERSAMPLE time during a bit. Thus OVERSAMPLE ticks in a bit. (interrupt not synchonized with edge).
|
|||
|
|||
// defined in bit-periods
|
|||
#define HALFDUPLEX_SWITCH_DELAY 5 |
|||
// It's best to define TIMER_SERIAL in variant.h. If not defined, we choose one here
|
|||
// The order is based on (lack of) features and compare channels, we choose the simplest available
|
|||
// because we only need an update interrupt
|
|||
#if !defined(TIMER_SERIAL) |
|||
#if defined(TIM18_BASE) |
|||
#define TIMER_SERIAL TIM18 |
|||
#elif defined(TIM7_BASE) |
|||
#define TIMER_SERIAL TIM7 |
|||
#elif defined(TIM6_BASE) |
|||
#define TIMER_SERIAL TIM6 |
|||
#elif defined(TIM22_BASE) |
|||
#define TIMER_SERIAL TIM22 |
|||
#elif defined(TIM21_BASE) |
|||
#define TIMER_SERIAL TIM21 |
|||
#elif defined(TIM17_BASE) |
|||
#define TIMER_SERIAL TIM17 |
|||
#elif defined(TIM16_BASE) |
|||
#define TIMER_SERIAL TIM16 |
|||
#elif defined(TIM15_BASE) |
|||
#define TIMER_SERIAL TIM15 |
|||
#elif defined(TIM14_BASE) |
|||
#define TIMER_SERIAL TIM14 |
|||
#elif defined(TIM13_BASE) |
|||
#define TIMER_SERIAL TIM13 |
|||
#elif defined(TIM11_BASE) |
|||
#define TIMER_SERIAL TIM11 |
|||
#elif defined(TIM10_BASE) |
|||
#define TIMER_SERIAL TIM10 |
|||
#elif defined(TIM12_BASE) |
|||
#define TIMER_SERIAL TIM12 |
|||
#elif defined(TIM19_BASE) |
|||
#define TIMER_SERIAL TIM19 |
|||
#elif defined(TIM9_BASE) |
|||
#define TIMER_SERIAL TIM9 |
|||
#elif defined(TIM5_BASE) |
|||
#define TIMER_SERIAL TIM5 |
|||
#elif defined(TIM4_BASE) |
|||
#define TIMER_SERIAL TIM4 |
|||
#elif defined(TIM3_BASE) |
|||
#define TIMER_SERIAL TIM3 |
|||
#elif defined(TIM2_BASE) |
|||
#define TIMER_SERIAL TIM2 |
|||
#elif defined(TIM20_BASE) |
|||
#define TIMER_SERIAL TIM20 |
|||
#elif defined(TIM8_BASE) |
|||
#define TIMER_SERIAL TIM8 |
|||
#elif defined(TIM1_BASE) |
|||
#define TIMER_SERIAL TIM1 |
|||
#else |
|||
#error No suitable timer found for SoftwareSerial, define TIMER_SERIAL in variant.h |
|||
#endif |
|||
#endif |
|||
//
|
|||
// Statics
|
|||
//
|
|||
HardwareTimer SoftwareSerial::timer(TIMER_SERIAL); |
|||
const IRQn_Type SoftwareSerial::timer_interrupt_number = static_cast<IRQn_Type>(getTimerUpIrq(TIMER_SERIAL)); |
|||
uint32_t SoftwareSerial::timer_interrupt_priority = NVIC_EncodePriority(NVIC_GetPriorityGrouping(), TIM_IRQ_PRIO, TIM_IRQ_SUBPRIO); |
|||
SoftwareSerial *SoftwareSerial::active_listener = nullptr; |
|||
SoftwareSerial *volatile SoftwareSerial::active_out = nullptr; |
|||
SoftwareSerial *volatile SoftwareSerial::active_in = nullptr; |
|||
int32_t SoftwareSerial::tx_tick_cnt = 0; // OVERSAMPLE ticks needed for a bit
|
|||
int32_t volatile SoftwareSerial::rx_tick_cnt = 0; // OVERSAMPLE ticks needed for a bit
|
|||
uint32_t SoftwareSerial::tx_buffer = 0; |
|||
int32_t SoftwareSerial::tx_bit_cnt = 0; |
|||
uint32_t SoftwareSerial::rx_buffer = 0; |
|||
int32_t SoftwareSerial::rx_bit_cnt = -1; // rx_bit_cnt = -1 : waiting for start bit
|
|||
uint32_t SoftwareSerial::cur_speed = 0; |
|||
|
|||
void SoftwareSerial::setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority) { |
|||
timer_interrupt_priority = NVIC_EncodePriority(NVIC_GetPriorityGrouping(), preemptPriority, subPriority); |
|||
} |
|||
|
|||
//
|
|||
// Private methods
|
|||
//
|
|||
|
|||
void SoftwareSerial::setSpeed(uint32_t speed) { |
|||
if (speed != cur_speed) { |
|||
timer.pause(); |
|||
if (speed != 0) { |
|||
// Disable the timer
|
|||
uint32_t clock_rate, cmp_value; |
|||
// Get timer clock
|
|||
clock_rate = timer.getTimerClkFreq(); |
|||
int pre = 1; |
|||
// Calculate prescale an compare value
|
|||
do { |
|||
cmp_value = clock_rate / (speed * OVERSAMPLE); |
|||
if (cmp_value >= UINT16_MAX) { |
|||
clock_rate /= 2; |
|||
pre *= 2; |
|||
} |
|||
} while (cmp_value >= UINT16_MAX); |
|||
timer.setPrescaleFactor(pre); |
|||
timer.setOverflow(cmp_value); |
|||
timer.setCount(0); |
|||
timer.attachInterrupt(&handleInterrupt); |
|||
timer.resume(); |
|||
NVIC_SetPriority(timer_interrupt_number, timer_interrupt_priority); |
|||
} |
|||
else |
|||
timer.detachInterrupt(); |
|||
cur_speed = speed; |
|||
} |
|||
} |
|||
|
|||
// This function sets the current object as the "listening"
|
|||
// one and returns true if it replaces another
|
|||
bool SoftwareSerial::listen() { |
|||
if (active_listener != this) { |
|||
// wait for any transmit to complete as we may change speed
|
|||
while (active_out); |
|||
active_listener->stopListening(); |
|||
rx_tick_cnt = 1; // 1 : next interrupt will decrease rx_tick_cnt to 0 which means RX pin level will be considered.
|
|||
rx_bit_cnt = -1; // rx_bit_cnt = -1 : waiting for start bit
|
|||
setSpeed(_speed); |
|||
active_listener = this; |
|||
if (!_half_duplex) active_in = this; |
|||
return true; |
|||
} |
|||
return false; |
|||
} |
|||
|
|||
// Stop listening. Returns true if we were actually listening.
|
|||
bool SoftwareSerial::stopListening() { |
|||
if (active_listener == this) { |
|||
// wait for any output to complete
|
|||
while (active_out); |
|||
if (_half_duplex) setRXTX(false); |
|||
active_listener = nullptr; |
|||
active_in = nullptr; |
|||
// turn off ints
|
|||
setSpeed(0); |
|||
return true; |
|||
} |
|||
return false; |
|||
} |
|||
|
|||
inline void SoftwareSerial::setTX() { |
|||
if (_inverse_logic) |
|||
LL_GPIO_ResetOutputPin(_transmitPinPort, _transmitPinNumber); |
|||
else |
|||
LL_GPIO_SetOutputPin(_transmitPinPort, _transmitPinNumber); |
|||
pinMode(_transmitPin, OUTPUT); |
|||
} |
|||
|
|||
inline void SoftwareSerial::setRX() { |
|||
pinMode(_receivePin, _inverse_logic ? INPUT_PULLDOWN : INPUT_PULLUP); // pullup for normal logic!
|
|||
} |
|||
|
|||
inline void SoftwareSerial::setRXTX(bool input) { |
|||
if (_half_duplex) { |
|||
if (input) { |
|||
if (active_in != this) { |
|||
setRX(); |
|||
rx_bit_cnt = -1; // rx_bit_cnt = -1 : waiting for start bit
|
|||
rx_tick_cnt = 2; // 2 : next interrupt will be discarded. 2 interrupts required to consider RX pin level
|
|||
active_in = this; |
|||
} |
|||
} |
|||
else { |
|||
if (active_in == this) { |
|||
setTX(); |
|||
active_in = nullptr; |
|||
} |
|||
} |
|||
} |
|||
} |
|||
|
|||
inline void SoftwareSerial::send() { |
|||
if (--tx_tick_cnt <= 0) { // if tx_tick_cnt > 0 interrupt is discarded. Only when tx_tick_cnt reaches 0 is TX pin set.
|
|||
if (tx_bit_cnt++ < 10) { // tx_bit_cnt < 10 transmission is not finished (10 = 1 start +8 bits + 1 stop)
|
|||
// Send data (including start and stop bits)
|
|||
if (tx_buffer & 1) |
|||
LL_GPIO_SetOutputPin(_transmitPinPort, _transmitPinNumber); |
|||
else |
|||
LL_GPIO_ResetOutputPin(_transmitPinPort, _transmitPinNumber); |
|||
tx_buffer >>= 1; |
|||
tx_tick_cnt = OVERSAMPLE; // Wait OVERSAMPLE ticks to send next bit
|
|||
} |
|||
else { // Transmission finished
|
|||
tx_tick_cnt = 1; |
|||
if (_output_pending) { |
|||
active_out = nullptr; |
|||
|
|||
// In half-duplex mode wait HALFDUPLEX_SWITCH_DELAY bit-periods after the byte has
|
|||
// been transmitted before allowing the switch to RX mode
|
|||
} |
|||
else if (tx_bit_cnt > 10 + OVERSAMPLE * HALFDUPLEX_SWITCH_DELAY) { |
|||
if (_half_duplex && active_listener == this) setRXTX(true); |
|||
active_out = nullptr; |
|||
} |
|||
} |
|||
} |
|||
} |
|||
|
|||
//
|
|||
// The receive routine called by the interrupt handler
|
|||
//
|
|||
inline void SoftwareSerial::recv() { |
|||
if (--rx_tick_cnt <= 0) { // if rx_tick_cnt > 0 interrupt is discarded. Only when rx_tick_cnt reaches 0 is RX pin considered
|
|||
bool inbit = LL_GPIO_IsInputPinSet(_receivePinPort, _receivePinNumber) ^ _inverse_logic; |
|||
if (rx_bit_cnt == -1) { // rx_bit_cnt = -1 : waiting for start bit
|
|||
if (!inbit) { |
|||
// got start bit
|
|||
rx_bit_cnt = 0; // rx_bit_cnt == 0 : start bit received
|
|||
rx_tick_cnt = OVERSAMPLE + 1; // Wait 1 bit (OVERSAMPLE ticks) + 1 tick in order to sample RX pin in the middle of the edge (and not too close to the edge)
|
|||
rx_buffer = 0; |
|||
} |
|||
else |
|||
rx_tick_cnt = 1; // Waiting for start bit, but wrong level. Wait for next Interrupt to check RX pin level
|
|||
} |
|||
else if (rx_bit_cnt >= 8) { // rx_bit_cnt >= 8 : waiting for stop bit
|
|||
if (inbit) { |
|||
// Stop-bit read complete. Add to buffer.
|
|||
uint8_t next = (_receive_buffer_tail + 1) % _SS_MAX_RX_BUFF; |
|||
if (next != _receive_buffer_head) { |
|||
// save new data in buffer: tail points to byte destination
|
|||
_receive_buffer[_receive_buffer_tail] = rx_buffer; // save new byte
|
|||
_receive_buffer_tail = next; |
|||
} |
|||
else // rx_bit_cnt = x with x = [0..7] correspond to new bit x received
|
|||
_buffer_overflow = true; |
|||
} |
|||
// Full trame received. Restart waiting for start bit at next interrupt
|
|||
rx_tick_cnt = 1; |
|||
rx_bit_cnt = -1; |
|||
} |
|||
else { |
|||
// data bits
|
|||
rx_buffer >>= 1; |
|||
if (inbit) rx_buffer |= 0x80; |
|||
rx_bit_cnt++; // Prepare for next bit
|
|||
rx_tick_cnt = OVERSAMPLE; // Wait OVERSAMPLE ticks before sampling next bit
|
|||
} |
|||
} |
|||
} |
|||
|
|||
//
|
|||
// Interrupt handling
|
|||
//
|
|||
|
|||
/* static */ |
|||
inline void SoftwareSerial::handleInterrupt(HardwareTimer*) { |
|||
if (active_in) active_in->recv(); |
|||
if (active_out) active_out->send(); |
|||
} |
|||
|
|||
//
|
|||
// Constructor
|
|||
//
|
|||
SoftwareSerial::SoftwareSerial(uint16_t receivePin, uint16_t transmitPin, bool inverse_logic /* = false */) : |
|||
_receivePin(receivePin), |
|||
_transmitPin(transmitPin), |
|||
_receivePinPort(digitalPinToPort(receivePin)), |
|||
_receivePinNumber(STM_LL_GPIO_PIN(digitalPinToPinName(receivePin))), |
|||
_transmitPinPort(digitalPinToPort(transmitPin)), |
|||
_transmitPinNumber(STM_LL_GPIO_PIN(digitalPinToPinName(transmitPin))), |
|||
_speed(0), |
|||
_buffer_overflow(false), |
|||
_inverse_logic(inverse_logic), |
|||
_half_duplex(receivePin == transmitPin), |
|||
_output_pending(0), |
|||
_receive_buffer_tail(0), |
|||
_receive_buffer_head(0) |
|||
{ |
|||
if ((receivePin < NUM_DIGITAL_PINS) || (transmitPin < NUM_DIGITAL_PINS)) { |
|||
/* Enable GPIO clock for tx and rx pin*/ |
|||
set_GPIO_Port_Clock(STM_PORT(digitalPinToPinName(transmitPin))); |
|||
set_GPIO_Port_Clock(STM_PORT(digitalPinToPinName(receivePin))); |
|||
} |
|||
else |
|||
_Error_Handler("ERROR: invalid pin number\n", -1); |
|||
} |
|||
|
|||
//
|
|||
// Destructor
|
|||
//
|
|||
SoftwareSerial::~SoftwareSerial() { end(); } |
|||
|
|||
//
|
|||
// Public methods
|
|||
//
|
|||
|
|||
void SoftwareSerial::begin(long speed) { |
|||
#ifdef FORCE_BAUD_RATE |
|||
speed = FORCE_BAUD_RATE; |
|||
#endif |
|||
_speed = speed; |
|||
if (!_half_duplex) { |
|||
setTX(); |
|||
setRX(); |
|||
listen(); |
|||
} |
|||
else |
|||
setTX(); |
|||
} |
|||
|
|||
void SoftwareSerial::end() { |
|||
stopListening(); |
|||
} |
|||
|
|||
// Read data from buffer
|
|||
int SoftwareSerial::read() { |
|||
// Empty buffer?
|
|||
if (_receive_buffer_head == _receive_buffer_tail) return -1; |
|||
|
|||
// Read from "head"
|
|||
uint8_t d = _receive_buffer[_receive_buffer_head]; // grab next byte
|
|||
_receive_buffer_head = (_receive_buffer_head + 1) % _SS_MAX_RX_BUFF; |
|||
return d; |
|||
} |
|||
|
|||
int SoftwareSerial::available() { |
|||
return (_receive_buffer_tail + _SS_MAX_RX_BUFF - _receive_buffer_head) % _SS_MAX_RX_BUFF; |
|||
} |
|||
|
|||
size_t SoftwareSerial::write(uint8_t b) { |
|||
// wait for previous transmit to complete
|
|||
_output_pending = 1; |
|||
while (active_out) { /* nada */ } |
|||
// add start and stop bits.
|
|||
tx_buffer = b << 1 | 0x200; |
|||
if (_inverse_logic) tx_buffer = ~tx_buffer; |
|||
tx_bit_cnt = 0; |
|||
tx_tick_cnt = OVERSAMPLE; |
|||
setSpeed(_speed); |
|||
if (_half_duplex) setRXTX(false); |
|||
_output_pending = 0; |
|||
// make us active
|
|||
active_out = this; |
|||
return 1; |
|||
} |
|||
|
|||
void SoftwareSerial::flush() { |
|||
noInterrupts(); |
|||
_receive_buffer_head = _receive_buffer_tail = 0; |
|||
interrupts(); |
|||
} |
|||
|
|||
int SoftwareSerial::peek() { |
|||
// Empty buffer?
|
|||
if (_receive_buffer_head == _receive_buffer_tail) return -1; |
|||
|
|||
// Read from "head"
|
|||
return _receive_buffer[_receive_buffer_head]; |
|||
} |
|||
|
|||
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
|
|||
@ -1,114 +0,0 @@ |
|||
/**
|
|||
* SoftwareSerial.h (formerly NewSoftSerial.h) |
|||
* |
|||
* Multi-instance software serial library for Arduino/Wiring |
|||
* -- Interrupt-driven receive and other improvements by ladyada |
|||
* (https://ladyada.net)
|
|||
* -- Tuning, circular buffer, derivation from class Print/Stream, |
|||
* multi-instance support, porting to 8MHz processors, |
|||
* various optimizations, PROGMEM delay tables, inverse logic and |
|||
* direct port writing by Mikal Hart (http://www.arduiniana.org)
|
|||
* -- Pin change interrupt macros by Paul Stoffregen (https://www.pjrc.com)
|
|||
* -- 20MHz processor support by Garrett Mace (http://www.macetech.com)
|
|||
* -- ATmega1280/2560 support by Brett Hagman (https://www.roguerobotics.com/)
|
|||
* |
|||
* This library is free software; you can redistribute it and/or |
|||
* modify it under the terms of the GNU Lesser General Public |
|||
* License as published by the Free Software Foundation; either |
|||
* version 2.1 of the License, or (at your option) any later version. |
|||
* |
|||
* This library is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
|||
* Lesser General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU Lesser General Public |
|||
* License along with this library; if not, write to the Free Software |
|||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
|||
* |
|||
* The latest version of this library can always be found at |
|||
* http://arduiniana.org.
|
|||
*/ |
|||
#pragma once |
|||
|
|||
#include <Arduino.h> |
|||
|
|||
/******************************************************************************
|
|||
* Definitions |
|||
******************************************************************************/ |
|||
|
|||
#define _SS_MAX_RX_BUFF 64 // RX buffer size
|
|||
|
|||
class SoftwareSerial : public Stream { |
|||
private: |
|||
// per object data
|
|||
uint16_t _receivePin; |
|||
uint16_t _transmitPin; |
|||
GPIO_TypeDef *_receivePinPort; |
|||
uint32_t _receivePinNumber; |
|||
GPIO_TypeDef *_transmitPinPort; |
|||
uint32_t _transmitPinNumber; |
|||
uint32_t _speed; |
|||
|
|||
uint16_t _buffer_overflow: 1; |
|||
uint16_t _inverse_logic: 1; |
|||
uint16_t _half_duplex: 1; |
|||
uint16_t _output_pending: 1; |
|||
|
|||
unsigned char _receive_buffer[_SS_MAX_RX_BUFF]; |
|||
volatile uint8_t _receive_buffer_tail; |
|||
volatile uint8_t _receive_buffer_head; |
|||
|
|||
uint32_t delta_start = 0; |
|||
|
|||
// static data
|
|||
static HardwareTimer timer; |
|||
static const IRQn_Type timer_interrupt_number; |
|||
static uint32_t timer_interrupt_priority; |
|||
static SoftwareSerial *active_listener; |
|||
static SoftwareSerial *volatile active_out; |
|||
static SoftwareSerial *volatile active_in; |
|||
static int32_t tx_tick_cnt; |
|||
static volatile int32_t rx_tick_cnt; |
|||
static uint32_t tx_buffer; |
|||
static int32_t tx_bit_cnt; |
|||
static uint32_t rx_buffer; |
|||
static int32_t rx_bit_cnt; |
|||
static uint32_t cur_speed; |
|||
|
|||
// private methods
|
|||
void send(); |
|||
void recv(); |
|||
void setTX(); |
|||
void setRX(); |
|||
void setSpeed(uint32_t speed); |
|||
void setRXTX(bool input); |
|||
static void handleInterrupt(HardwareTimer *timer); |
|||
|
|||
public: |
|||
// public methods
|
|||
|
|||
SoftwareSerial(uint16_t receivePin, uint16_t transmitPin, bool inverse_logic=false); |
|||
virtual ~SoftwareSerial(); |
|||
void begin(long speed); |
|||
bool listen(); |
|||
void end(); |
|||
bool isListening() { return active_listener == this; } |
|||
bool stopListening(); |
|||
bool overflow() { |
|||
bool ret = _buffer_overflow; |
|||
if (ret) _buffer_overflow = false; |
|||
return ret; |
|||
} |
|||
int peek(); |
|||
|
|||
virtual size_t write(uint8_t byte); |
|||
virtual int read(); |
|||
virtual int available(); |
|||
virtual void flush(); |
|||
operator bool() { return true; } |
|||
|
|||
static void setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority); |
|||
|
|||
using Print::write; |
|||
}; |
|||
@ -1,33 +0,0 @@ |
|||
from os.path import join |
|||
Import("env") |
|||
|
|||
import os,shutil |
|||
from SCons.Script import DefaultEnvironment |
|||
from platformio import util |
|||
|
|||
env = DefaultEnvironment() |
|||
platform = env.PioPlatform() |
|||
board = env.BoardConfig() |
|||
|
|||
FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32") |
|||
#FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32@3.10500.190327") |
|||
CMSIS_DIR = os.path.join(FRAMEWORK_DIR, "CMSIS", "CMSIS") |
|||
assert os.path.isdir(FRAMEWORK_DIR) |
|||
assert os.path.isdir(CMSIS_DIR) |
|||
assert os.path.isdir("buildroot/share/PlatformIO/variants") |
|||
|
|||
mcu_type = board.get("build.mcu")[:-2] |
|||
variant = board.get("build.variant") |
|||
series = mcu_type[:7].upper() + "xx" |
|||
variant_dir = os.path.join(FRAMEWORK_DIR, "variants", variant) |
|||
|
|||
source_dir = os.path.join("buildroot/share/PlatformIO/variants", variant) |
|||
assert os.path.isdir(source_dir) |
|||
|
|||
if not os.path.isdir(variant_dir): |
|||
os.mkdir(variant_dir) |
|||
|
|||
for file_name in os.listdir(source_dir): |
|||
full_file_name = os.path.join(source_dir, file_name) |
|||
if os.path.isfile(full_file_name): |
|||
shutil.copy(full_file_name, variant_dir) |
|||
@ -0,0 +1,15 @@ |
|||
#!/usr/bin/env bash |
|||
# |
|||
# Build tests for STM32F070CB Malyan M200 v2 |
|||
# |
|||
|
|||
# exit on first failure |
|||
set -e |
|||
|
|||
restore_configs |
|||
opt_set MOTHERBOARD BOARD_MALYAN_M200_V2 |
|||
opt_set SERIAL_PORT -1 |
|||
exec_test $1 $2 "Malyan M200 v2 Default Config" |
|||
|
|||
# cleanup |
|||
restore_configs |
|||
Loading…
Reference in new issue