diff --git a/Marlin/src/HAL/STM32F1/SPI.cpp b/Marlin/src/HAL/STM32F1/SPI.cpp
index 8eb8f9aa88..5576cc7b56 100644
--- a/Marlin/src/HAL/STM32F1/SPI.cpp
+++ b/Marlin/src/HAL/STM32F1/SPI.cpp
@@ -266,7 +266,7 @@ void SPIClass::endTransaction() { }
 
 uint16_t SPIClass::read() {
   while (!spi_is_rx_nonempty(_currentSetting->spi_d)) { /* nada */ }
-  return (uint16)spi_rx_reg(_currentSetting->spi_d);
+  return (uint16_t)spi_rx_reg(_currentSetting->spi_d);
 }
 
 void SPIClass::read(uint8_t *buf, uint32_t len) {
diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp
index 47b5f51d2c..6dc76947e5 100644
--- a/Marlin/src/MarlinCore.cpp
+++ b/Marlin/src/MarlinCore.cpp
@@ -30,6 +30,14 @@
 
 #include "MarlinCore.h"
 
+#include "HAL/shared/Delay.h"
+#include "HAL/shared/esp_wifi.h"
+
+#ifdef ARDUINO
+  #include <pins_arduino.h>
+#endif
+#include <math.h>
+
 #include "core/utility.h"
 #include "lcd/ultralcd.h"
 #include "module/motion.h"
@@ -43,15 +51,8 @@
 #include "module/printcounter.h" // PrintCounter or Stopwatch
 #include "feature/closedloop.h"
 
-#include "HAL/shared/Delay.h"
-#include "HAL/shared/esp_wifi.h"
-
 #include "module/stepper/indirection.h"
 
-#ifdef ARDUINO
-  #include <pins_arduino.h>
-#endif
-#include <math.h>
 #include "libs/nozzle.h"
 
 #include "gcode/gcode.h"
diff --git a/Marlin/src/core/serial.h b/Marlin/src/core/serial.h
index 812ff5471f..7050caa1f0 100644
--- a/Marlin/src/core/serial.h
+++ b/Marlin/src/core/serial.h
@@ -245,10 +245,11 @@ extern uint8_t marlin_debug_flags;
 #define SERIAL_ECHOLIST(pre,V...)   do{ SERIAL_ECHOPGM(pre); _SLST_N(NUM_ARGS(V),V); }while(0)
 #define SERIAL_ECHOLIST_N(N,V...)   _SLST_N(N,LIST_N(N,V))
 
-#define SERIAL_ECHO_P(P)            (serialprintPGM(P))
+#define SERIAL_ECHOPGM_P(P)         (serialprintPGM(P))
+#define SERIAL_ECHOLNPGM_P(P)       (serialprintPGM(P "\n"))
 
-#define SERIAL_ECHOPGM(S)           (SERIAL_ECHO_P(PSTR(S)))
-#define SERIAL_ECHOLNPGM(S)         (SERIAL_ECHO_P(PSTR(S "\n")))
+#define SERIAL_ECHOPGM(S)           (serialprintPGM(PSTR(S)))
+#define SERIAL_ECHOLNPGM(S)         (serialprintPGM(PSTR(S "\n")))
 
 #define SERIAL_ECHOPAIR_F_P(P,V...) do{ serialprintPGM(P); SERIAL_ECHO_F(V); }while(0)
 #define SERIAL_ECHOLNPAIR_F_P(V...) do{ SERIAL_ECHOPAIR_F_P(V); SERIAL_EOL(); }while(0)
diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp
index 72336f7cc1..df845c593c 100644
--- a/Marlin/src/module/configuration_store.cpp
+++ b/Marlin/src/module/configuration_store.cpp
@@ -3224,31 +3224,33 @@ void MarlinSettings::reset() {
 
       #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
         say_M906(forReplay);
-        #if AXIS_IS_TMC(X)
-          SERIAL_ECHOPAIR_P(SP_X_STR, stepperX.getMilliamps());
-        #endif
-        #if AXIS_IS_TMC(Y)
-          SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY.getMilliamps());
-        #endif
-        #if AXIS_IS_TMC(Z)
-          SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ.getMilliamps());
-        #endif
-        SERIAL_EOL();
+        SERIAL_ECHOLNPAIR_P(
+          #if AXIS_IS_TMC(X)
+            SP_X_STR, stepperX.getMilliamps(),
+          #endif
+          #if AXIS_IS_TMC(Y)
+            SP_Y_STR, stepperY.getMilliamps(),
+          #endif
+          #if AXIS_IS_TMC(Z)
+            SP_Z_STR, stepperZ.getMilliamps()
+          #endif
+        );
       #endif
 
       #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
         say_M906(forReplay);
         SERIAL_ECHOPGM(" I1");
-        #if AXIS_IS_TMC(X2)
-          SERIAL_ECHOPAIR_P(SP_X_STR, stepperX2.getMilliamps());
-        #endif
-        #if AXIS_IS_TMC(Y2)
-          SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY2.getMilliamps());
-        #endif
-        #if AXIS_IS_TMC(Z2)
-          SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ2.getMilliamps());
-        #endif
-        SERIAL_EOL();
+        SERIAL_ECHOLNPAIR_P(
+          #if AXIS_IS_TMC(X2)
+            SP_X_STR, stepperX2.getMilliamps(),
+          #endif
+          #if AXIS_IS_TMC(Y2)
+            SP_Y_STR, stepperY2.getMilliamps(),
+          #endif
+          #if AXIS_IS_TMC(Z2)
+            SP_Z_STR, stepperZ2.getMilliamps()
+          #endif
+        );
       #endif
 
       #if AXIS_IS_TMC(Z3)
@@ -3451,9 +3453,9 @@ void MarlinSettings::reset() {
 
         if (chop_x || chop_y || chop_z) {
           say_M569(forReplay);
-          if (chop_x) SERIAL_ECHO_P(SP_X_STR);
-          if (chop_y) SERIAL_ECHO_P(SP_Y_STR);
-          if (chop_z) SERIAL_ECHO_P(SP_Z_STR);
+          if (chop_x) SERIAL_ECHOPGM_P(SP_X_STR);
+          if (chop_y) SERIAL_ECHOPGM_P(SP_Y_STR);
+          if (chop_z) SERIAL_ECHOPGM_P(SP_Z_STR);
           SERIAL_EOL();
         }
 
@@ -3475,9 +3477,9 @@ void MarlinSettings::reset() {
 
         if (chop_x2 || chop_y2 || chop_z2) {
           say_M569(forReplay, PSTR("I1"));
-          if (chop_x2) SERIAL_ECHO_P(SP_X_STR);
-          if (chop_y2) SERIAL_ECHO_P(SP_Y_STR);
-          if (chop_z2) SERIAL_ECHO_P(SP_Z_STR);
+          if (chop_x2) SERIAL_ECHOPGM_P(SP_X_STR);
+          if (chop_y2) SERIAL_ECHOPGM_P(SP_Y_STR);
+          if (chop_z2) SERIAL_ECHOPGM_P(SP_Z_STR);
           SERIAL_EOL();
         }