Bring other configs up to date with wt150 changes

7 years ago · 4cdda5615b
19 changed files with 56 additions and 57 deletions
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -256,7 +256,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -407,8 +406,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -421,6 +420,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@ -256,7 +256,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -407,8 +406,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -421,6 +420,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@ -256,7 +256,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -407,8 +406,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -421,6 +420,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@ -256,7 +256,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -407,8 +406,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -421,6 +420,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
--- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
@ -256,7 +256,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -407,8 +406,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -422,6 +421,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@ -269,7 +269,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -420,8 +419,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -434,6 +433,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
--- a/Marlin/example_configurations/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/K8400/Configuration_adv.h
@ -256,7 +256,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -407,8 +406,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -421,6 +420,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@ -256,7 +256,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -407,8 +406,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -421,6 +420,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@ -256,7 +256,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -407,8 +406,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -421,6 +420,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@ -264,7 +264,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -415,8 +414,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -429,6 +428,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@ -256,7 +256,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -421,8 +420,8 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
-// Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8
-#define DIGIPOT_I2C_NUM_CHANNELS 8
+//#define DIGIPOT_MCP4018
+#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO

--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@ -256,7 +256,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -407,8 +406,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -421,6 +420,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
--- a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
@ -256,7 +256,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -409,8 +408,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -423,6 +422,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@ -256,7 +256,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -409,8 +408,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -423,6 +422,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@ -256,7 +256,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -409,8 +408,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -423,6 +422,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@ -261,7 +261,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -414,8 +413,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -428,6 +427,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@ -256,7 +256,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -409,8 +408,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -423,6 +422,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@ -256,7 +256,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -407,8 +406,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -421,6 +420,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 4 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.7, 1.7, 1.7, 1.7 }  // 5DPRINT
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@ -256,7 +256,6 @@
  #define INVERT_X2_VS_X_DIR true
 #endif

-
 // Dual Y Steppers
 // Uncomment this option to drive two Y axis motors.
 // The next unused E driver will be assigned to the second Y stepper.
@ -407,8 +406,8 @@
 *                         known compatible chips: AD5206
 *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
 *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT & AZTEEG_X3_PRO
- *                         known compatible chips: MCP4451
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
 *
 *  Motor currents can also be set by M907 - M910 and by the LCD.
 *    M907 - applies to all.
@ -421,6 +420,7 @@

 // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
 //#define DIGIPOT_I2C
+//#define DIGIPOT_MCP4018
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
 #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}  //  AZTEEG_X3_PRO