Browse Source

Fix manual move with MKS H43 (#21511)

Co-authored-by: Scott Lahteine <github@thinkyhead.com>
vanilla_fb_2.0.x
Sola 4 years ago
committed by GitHub
parent
commit
4cba40f9fd
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
  1. 4
      Marlin/src/gcode/gcode.cpp
  2. 4
      Marlin/src/gcode/gcode.h
  3. 6
      Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.cpp
  4. 2
      Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.h
  5. 54
      Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.cpp

4
Marlin/src/gcode/gcode.cpp

@ -977,6 +977,10 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
case 1001: M1001(); break; // M1001: [INTERNAL] Handle SD completion
#endif
#if ENABLED(DGUS_LCD_UI_MKS)
case 1002: M1002(); break; // M1002: [INTERNAL] Tool-change and Relative E Move
#endif
#if ENABLED(MAX7219_GCODE)
case 7219: M7219(); break; // M7219: Set LEDs, columns, and rows
#endif

4
Marlin/src/gcode/gcode.h

@ -1069,6 +1069,10 @@ private:
static void M1001();
#endif
#if ENABLED(DGUS_LCD_UI_MKS)
static void M1002();
#endif
#if ENABLED(MAX7219_GCODE)
static void M7219();
#endif

6
Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.cpp

@ -45,7 +45,7 @@
uint16_t manualMoveStep = 1;
uint16_t distanceFilament = 10;
uint16_t FilamentSpeed = 25;
uint16_t filamentSpeed_mm_s = 25;
float ZOffset_distance = 0.1;
float mesh_adj_distance = 0.01;
float Z_distance = 0.1;
@ -555,7 +555,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
VPHELPER(VP_LOAD_Filament, nullptr, &ScreenHandler.MKS_FilamentLoad, nullptr),
VPHELPER(VP_UNLOAD_Filament, nullptr, &ScreenHandler.MKS_FilamentUnLoad, nullptr),
VPHELPER(VP_Filament_distance, &distanceFilament, &ScreenHandler.GetManualFilament, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Filament_speed, &FilamentSpeed, &ScreenHandler.GetManualFilamentSpeed, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Filament_speed, &filamentSpeed_mm_s, &ScreenHandler.GetManualFilamentSpeed, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
#endif
#endif
@ -569,7 +569,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
VPHELPER(VP_Filament_distance, &distanceFilament, &ScreenHandler.GetManualFilament, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
VPHELPER(VP_Filament_speed, &FilamentSpeed, &ScreenHandler.GetManualFilamentSpeed, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Filament_speed, &filamentSpeed_mm_s, &ScreenHandler.GetManualFilamentSpeed, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
#endif
#if ENABLED(PIDTEMP)

2
Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.h

@ -37,7 +37,7 @@
extern uint16_t manualMoveStep;
extern uint16_t distanceFilament;
extern uint16_t FilamentSpeed;
extern uint16_t filamentSpeed_mm_s;
extern float ZOffset_distance;
extern float mesh_adj_distance;
extern float Z_distance;

54
Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.cpp

@ -840,7 +840,7 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
// buf[4] = axiscode;
char buf[6];
sprintf(buf,"G28 %c",axiscode);
sprintf(buf, "G28 %c", axiscode);
//DEBUG_ECHOPAIR(" ", buf);
queue.enqueue_one_now(buf);
//DEBUG_ECHOLNPGM(" ✓");
@ -1190,17 +1190,18 @@ void DGUSScreenHandler::GetManualFilamentSpeed(DGUS_VP_Variable &var, void *val_
uint16_t value_len = swap16(*(uint16_t*)val_ptr);
DEBUG_ECHOLNPAIR_F("FilamentSpeed value:", value_len);
DEBUG_ECHOLNPAIR_F("filamentSpeed_mm_s value:", value_len);
FilamentSpeed = value_len;
filamentSpeed_mm_s = value_len;
skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
}
void DGUSScreenHandler::MKS_FilamentLoadUnload(DGUS_VP_Variable &var, void *val_ptr, const int filamentDir) {
#if EITHER(HAS_MULTI_HOTEND, SINGLENOZZLE)
char buf[40];
uint8_t swap_tool = 0;
#else
constexpr uint8_t swap_tool = 1; // T0 (or none at all)
#endif
#if HAS_HOTEND
@ -1215,9 +1216,8 @@ void DGUSScreenHandler::MKS_FilamentLoadUnload(DGUS_VP_Variable &var, void *val_
default: break;
case 0:
#if HAS_HOTEND
if (thermalManager.tooColdToExtrude(0)) {
if (thermalManager.tooColdToExtrude(0))
hotend_too_cold = 1;
}
else {
#if EITHER(HAS_MULTI_HOTEND, SINGLENOZZLE)
swap_tool = 1;
@ -1243,15 +1243,41 @@ void DGUSScreenHandler::MKS_FilamentLoadUnload(DGUS_VP_Variable &var, void *val_
}
#endif
if (swap_tool) {
char buf[30];
snprintf_P(buf, 30
#if EITHER(HAS_MULTI_HOTEND, SINGLENOZZLE)
, PSTR("M1002T%cE%dF%d"), char('0' + swap_tool - 1)
#else
, PSTR("M1002E%dF%d")
#endif
, (int)distanceFilament * filamentDir, filamentSpeed_mm_s * 60
);
queue.inject(buf);
}
}
/**
* M1002: Do a tool-change and relative move for MKS_FilamentLoadUnload
* within the G-code execution window for best concurrency.
*/
void GcodeSuite::M1002() {
#if EITHER(HAS_MULTI_HOTEND, SINGLENOZZLE)
if (swap_tool) {
queue.enqueue_now_P(swap_tool == 2 ? PSTR("T1") : PSTR("T0"));
queue.enqueue_now_P(PSTR("G91"));
snprintf_P(buf, 40, PSTR("G1 E%d F%d"), (int)distanceFilament * filamentDir, FilamentSpeed * 60);
queue.enqueue_one_now(buf);
queue.enqueue_now_P(PSTR("G90"));
}
{
char buf[3];
sprintf_P(buf, PSTR("T%c"), char('0' + parser.intval('T')));
process_subcommands_now(buf);
}
#endif
const uint8_t old_axis_relative = axis_relative;
set_e_relative(true); // M83
{
char buf[20];
snprintf_P(buf, 20, PSTR("G1E%dF%d"), parser.intval('E'), parser.intval('F'));
process_subcommands_now(buf);
}
axis_relative = old_axis_relative;
}
void DGUSScreenHandler::MKS_FilamentLoad(DGUS_VP_Variable &var, void *val_ptr) {
@ -1445,7 +1471,7 @@ void DGUSScreenHandler::LanguagePInit() {
void DGUSScreenHandler::DGUS_ExtrudeLoadInit(void) {
ex_filament.ex_length = distanceFilament;
ex_filament.ex_load_unload_flag = 0;
ex_filament.ex_need_time = FilamentSpeed;
ex_filament.ex_need_time = filamentSpeed_mm_s;
ex_filament.ex_speed = 0;
ex_filament.ex_status = EX_NONE;
ex_filament.ex_tick_end = 0;

Loading…
Cancel
Save