Merge pull request #4188 from thinkyhead/rc_birkett_info_menu_jul2

Printer information menu

.travis.yml

@@ -161,11 +161,11 @@ script:
   - opt_set MOTHERBOARD BOARD_MINIRAMBO
   - build_marlin
   #
-  # Enable FILAMENTCHANGEENABLE
+  # Test FILAMENTCHANGEENABLE and LCD_INFO_MENU
   #
   - restore_configs
   - opt_enable ULTIMAKERCONTROLLER
-  - opt_enable_adv FILAMENTCHANGEENABLE
+  - opt_enable_adv FILAMENTCHANGEENABLE LCD_INFO_MENU
   - build_marlin
   #
   # Enable filament sensor

Marlin/Configuration_adv.h

@@ -364,6 +364,9 @@
 
 // @section lcd
 
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/SanityCheck.h

@@ -56,35 +56,21 @@
  * Marlin release, version and default string
  */
 #ifndef SHORT_BUILD_VERSION
-  #error "SHORT_BUILD_VERSION Information must be specified"
+  #error "SHORT_BUILD_VERSION must be specified."
-#endif
+#elif !defined(DETAILED_BUILD_VERSION)
-
+  #error "BUILD_VERSION must be specified."
-#ifndef DETAILED_BUILD_VERSION
+#elif !defined(STRING_DISTRIBUTION_DATE)
-  #error "BUILD_VERSION Information must be specified"
+  #error "STRING_DISTRIBUTION_DATE must be specified."
-#endif
+#elif !defined(PROTOCOL_VERSION)
-
+  #error "PROTOCOL_VERSION must be specified."
-#ifndef STRING_DISTRIBUTION_DATE
+#elif !defined(MACHINE_NAME)
-  #error "STRING_DISTRIBUTION_DATE Information must be specified"
+  #error "MACHINE_NAME must be specified."
-#endif
+#elif !defined(SOURCE_CODE_URL)
-
+  #error "SOURCE_CODE_URL must be specified."
-#ifndef PROTOCOL_VERSION
+#elif !defined(DEFAULT_MACHINE_UUID)
-  #error "PROTOCOL_VERSION Information must be specified"
+  #error "DEFAULT_MACHINE_UUID must be specified."
-#endif
+#elif !defined(WEBSITE_URL)
-
+  #error "WEBSITE_URL must be specified."
-#ifndef MACHINE_NAME
-  #error "MACHINE_NAME Information must be specified"
-#endif
-
-#ifndef SOURCE_CODE_URL
-  #error "SOURCE_CODE_URL Information must be specified"
-#endif
-
-#ifndef DEFAULT_MACHINE_UUID
-  #error "DEFAULT_MACHINE_UUID Information must be specified"
-#endif
-
-#ifndef WEBSITE_URL
-  #error "WEBSITE_URL Information must be specified"
 #endif
 
 /**

Marlin/dogm_lcd_implementation.h

@@ -473,6 +473,30 @@ static void lcd_implementation_mark_as_selected(uint8_t row, bool isSelected) {
   u8g.setPrintPos((START_ROW) * (DOG_CHAR_WIDTH), (row + 1) * (DOG_CHAR_HEIGHT));
 }
 
+#if ENABLED(LCD_INFO_MENU)
+
+  static void lcd_implementation_drawmenu_static(uint8_t row, const char* pstr, const char* valstr=NULL, bool center=false) {
+    char c;
+    int8_t n = LCD_WIDTH;
+    u8g.setPrintPos(0, (row + 1) * (DOG_CHAR_HEIGHT));
+    u8g.setColorIndex(1); // normal text
+    if (center) {
+      int8_t pad = (LCD_WIDTH - lcd_strlen_P(pstr)) / 2;
+      while (--pad >= 0) { lcd_print(' '); n--; }
+    }
+    while (c = pgm_read_byte(pstr)) {
+      n -= lcd_print(c);
+      pstr++;
+    }
+    if (valstr) {
+      lcd_print(valstr);
+      n -= lcd_strlen(valstr);
+    }
+    while (n-- > 0) lcd_print(' ');
+  }
+
+#endif // LCD_INFO_MENU
+
 static void lcd_implementation_drawmenu_generic(bool isSelected, uint8_t row, const char* pstr, char pre_char, char post_char) {
   UNUSED(pstr);
   UNUSED(pre_char);

Marlin/example_configurations/Cartesio/Configuration_adv.h

@@ -364,6 +364,9 @@
 
 // @section lcd
 
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/example_configurations/Felix/Configuration_adv.h

@@ -364,6 +364,9 @@
 
 // @section lcd
 
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/example_configurations/Hephestos/Configuration_adv.h

@@ -364,6 +364,9 @@
 
 // @section lcd
 
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/example_configurations/Hephestos_2/Configuration_adv.h

@@ -364,6 +364,9 @@
 
 // @section lcd
 
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/example_configurations/K8200/Configuration_adv.h

@@ -370,6 +370,9 @@
 
 // @section lcd
 
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/example_configurations/RigidBot/Configuration_adv.h

@@ -364,6 +364,9 @@
 
 // @section lcd
 
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/example_configurations/SCARA/Configuration_adv.h

@@ -364,6 +364,9 @@
 
 // @section lcd
 
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/example_configurations/TAZ4/Configuration_adv.h

@@ -372,6 +372,9 @@
 
 // @section lcd
 
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/example_configurations/WITBOX/Configuration_adv.h

@@ -364,6 +364,9 @@
 
 // @section lcd
 
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/example_configurations/delta/biv2.5/Configuration_adv.h

@@ -366,6 +366,9 @@
 
 // @section lcd
 
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/example_configurations/delta/generic/Configuration_adv.h

@@ -366,6 +366,9 @@
 
 // @section lcd
 
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

@@ -365,6 +365,9 @@
 
 // @section lcd
 
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h

@@ -370,6 +370,9 @@
 
 // @section lcd
 
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h

@@ -366,6 +366,9 @@
 
 // @section lcd
 
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/example_configurations/makibox/Configuration_adv.h

@@ -364,6 +364,9 @@
 
 // @section lcd
 
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

@@ -364,6 +364,9 @@
 
 // @section lcd
 
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
 #if ENABLED(SDSUPPORT)
 
   // Some RAMPS and other boards don't detect when an SD card is inserted. You can work

Marlin/language_en.h

@@ -520,5 +520,47 @@
 #ifndef MSG_DELTA_CALIBRATE_CENTER
   #define MSG_DELTA_CALIBRATE_CENTER          "Calibrate Center"
 #endif
+#ifndef MSG_INFO_MENU
+  #define MSG_INFO_MENU                       "About Printer"
+#endif
+#ifndef MSG_INFO_PRINTER_MENU
+  #define MSG_INFO_PRINTER_MENU               "Printer Info"
+#endif
+#ifndef MSG_INFO_STATS_MENU
+  #define MSG_INFO_STATS_MENU                 "Printer Stats"
+#endif
+#ifndef MSG_INFO_BOARD_MENU
+  #define MSG_INFO_BOARD_MENU                 "Board Info"
+#endif
+#ifndef MSG_INFO_THERMISTOR_MENU
+  #define MSG_INFO_THERMISTOR_MENU            "Thermistors"
+#endif
+#ifndef MSG_INFO_EXTRUDERS
+  #define MSG_INFO_EXTRUDERS                  "Extruders"
+#endif
+#ifndef MSG_INFO_BAUDRATE
+  #define MSG_INFO_BAUDRATE                   "Baud"
+#endif
+#ifndef MSG_INFO_PROTOCOL
+  #define MSG_INFO_PROTOCOL                   "Protocol"
+#endif
+#ifndef MSG_INFO_TOTAL_PRINTS
+  #define MSG_INFO_TOTAL_PRINTS               "Total Prints"
+#endif
+#ifndef MSG_INFO_FINISHED_PRINTS
+  #define MSG_INFO_FINISHED_PRINTS            "Finished Prints"
+#endif
+#ifndef MSG_INFO_PRINT_TIME
+  #define MSG_INFO_PRINT_TIME                 "Total Print Time"
+#endif
+#ifndef MSG_INFO_MIN_TEMP
+  #define MSG_INFO_MIN_TEMP                   "Min Temp"
+#endif
+#ifndef MSG_INFO_MAX_TEMP
+  #define MSG_INFO_MAX_TEMP                   "Max Temp"
+#endif
+#ifndef MSG_INFO_PSU
+  #define MSG_INFO_PSU                        "Power Supply"
+#endif
 
 #endif // LANGUAGE_EN_H

Marlin/pins_3DRAG.h

@@ -24,10 +24,19 @@
  * 3DRAG (and K8200) Arduino Mega with RAMPS v1.4 pin assignments
  */
 
-#include "pins_RAMPS_14.h"
+#ifndef BOARD_NAME
+  #define BOARD_NAME "3Drag"
+#endif
+
+#ifndef DEFAULT_MACHINE_NAME
+  #define DEFAULT_MACHINE_NAME "3Drag"
+#endif
 
-#define DEFAULT_MACHINE_NAME    "3Drag"
+#ifndef DEFAULT_SOURCE_CODE_URL
-#define DEFAULT_SOURCE_CODE_URL "http://3dprint.elettronicain.it/"
+  #define DEFAULT_SOURCE_CODE_URL "http://3dprint.elettronicain.it/"
+#endif
+
+#include "pins_RAMPS_14.h"
 
 #undef Z_ENABLE_PIN
 #define Z_ENABLE_PIN       63

Marlin/pins_5DPRINT.h

@@ -31,6 +31,7 @@
 #endif
 
 #define DEFAULT_MACHINE_NAME "Makibox"
+#define BOARD_NAME           "5DPrint D8"
 
 #define LARGE_FLASH        true
 

Marlin/pins_99.h

@@ -23,7 +23,8 @@
 /**
  * Board 99 pin assignments
  */
-
+#define BOARD_NAME          "99 Unknown"
+ 
 #define X_STEP_PIN          2
 #define X_DIR_PIN           3
 #define X_ENABLE_PIN        -1

Marlin/pins_A4JP.h

@@ -28,6 +28,8 @@
   #error "Oops!  Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME "AJ4P"
+
 // Servo support
 #define SERVO0_PIN 22 // Motor header MX1
 #define SERVO1_PIN 23 // Motor header MX2

Marlin/pins_AZTEEG_X1.h

@@ -24,6 +24,7 @@
  * Azteeg X1 pin assignments
  */
 
-#define SANGUINOLOLU_V_1_2
+#define BOARD_NAME "Azteeg X1"
 
+#define SANGUINOLOLU_V_1_2
 #include "pins_SANGUINOLOLU_11.h"

Marlin/pins_AZTEEG_X3.h

@@ -24,6 +24,8 @@
  * AZTEEG_X3 Arduino Mega with RAMPS v1.4 pin assignments
  */
 
+#define BOARD_NAME "Azteeg X3"
+
 #include "pins_RAMPS_14_EFB.h"
 
 #if ENABLED(VIKI2) || ENABLED(miniVIKI)

Marlin/pins_AZTEEG_X3_PRO.h

@@ -24,6 +24,8 @@
  * AZTEEG_X3_PRO (Arduino Mega) pin assignments
  */
 
+#define BOARD_NAME "Azteeg X3 Pro"
+
 #include "pins_RAMPS_14.h"
 
 #undef FAN_PIN

Marlin/pins_BAM_DICE_DUE.h

@@ -24,6 +24,8 @@
  * BAM&DICE Due (Arduino Mega) pin assignments
  */
 
+#define BOARD_NAME "2PrintBeta Due"
+
 #include "pins_RAMPS_14_EFB.h"
 
 #undef TEMP_0_PIN

Marlin/pins_BQ_ZUM_MEGA_3D.h

@@ -28,6 +28,8 @@
   #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME "ZUM Mega 3D"
+
 #include "pins_RAMPS_13.h"
 
 #undef X_MAX_PIN

Marlin/pins_BRAINWAVE.h

@@ -31,6 +31,8 @@
   #error "Oops!  Make sure you have 'Brainwave' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME         "Brainwave"
+
 #define X_STEP_PIN         27
 #define X_DIR_PIN          29
 #define X_ENABLE_PIN       28

Marlin/pins_BRAINWAVE_PRO.h

@@ -37,6 +37,8 @@
   #error "Uncomment #define AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h for this config"
 #endif
 
+#define BOARD_NAME         "Brainwave Pro"
+
 #define LARGE_FLASH        true
 
 #define X_STEP_PIN         33

Marlin/pins_CHEAPTRONIC.h

@@ -28,6 +28,7 @@
   #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME         "Cheaptronic v1.0"
 #define LARGE_FLASH        true
 
 // X motor stepper

Marlin/pins_CNCONTROLS_12.h

@@ -6,6 +6,8 @@
   #error Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
 #endif
 
+#define BOARD_NAME            "CN Controls V12"
+
 //#define LARGE_FLASH true
 
 #define X_ENABLE_PIN          26

Marlin/pins_ELEFU_3.h

@@ -28,6 +28,8 @@
   #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME         "Elefu Ra v3"
+
 #define X_STEP_PIN         49
 #define X_DIR_PIN          13
 #define X_ENABLE_PIN       48

Marlin/pins_FELIX2.h

@@ -24,6 +24,8 @@
  * FELIXprinters v2.0/3.0 (RAMPS v1.4) pin assignments
  */
 
+#define BOARD_NAME "Felix 2.0+"
+
 #include "pins_RAMPS_14_EFB.h"
 
 #undef HEATER_1_PIN

Marlin/pins_GEN3_MONOLITHIC.h

@@ -28,6 +28,7 @@
   #error "Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME "Gen3 Monolithic"
 #define DEBUG_PIN 0
 
 // x axis

Marlin/pins_GEN3_PLUS.h

@@ -28,6 +28,8 @@
   #error "Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME         "Gen3+"
+
 #define X_STEP_PIN         15
 #define X_DIR_PIN          18
 #define X_STOP_PIN         20

Marlin/pins_GEN6.h

@@ -30,6 +30,10 @@
   #endif
 #endif
 
+#ifndef BOARD_NAME
+  #define BOARD_NAME "Gen6"
+#endif
+
 //x axis pins
 #define X_STEP_PIN      15
 #define X_DIR_PIN       18

Marlin/pins_GEN6_DELUXE.h

@@ -24,4 +24,6 @@
  * Gen6 Deluxe pin assignments
  */
 
+#define BOARD_NAME "Gen6 Deluxe"
+
 #include "pins_GEN6.h"

Marlin/pins_GEN7_12.h

@@ -28,6 +28,10 @@
   #error "Oops!  Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu."
 #endif
 
+#ifndef BOARD_NAME
+  #define BOARD_NAME "Gen7 v1.1 / 1.2"
+#endif
+
 #ifndef GEN7_VERSION
   #define GEN7_VERSION 12 // v1.x
 #endif

Marlin/pins_GEN7_13.h

@@ -24,7 +24,7 @@
  * Gen7 v1.3 pin assignments
  */
 
-#define MOTHERBOARD BOARD_GEN7_12
+#define BOARD_NAME "Gen7 v1.3"
-#define GEN7_VERSION 13 // v1.3
 
+#define GEN7_VERSION 13 // v1.3
 #include "pins_GEN7_12.h"

Marlin/pins_GEN7_14.h

@@ -24,12 +24,14 @@
  * Gen7 v1.4 pin assignments
  */
 
-#define GEN7_VERSION 14 // v1.4
-
 #if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
   #error "Oops!  Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME "Gen7 v1.4"
+
+#define GEN7_VERSION 14 // v1.4
+
 //x axis pins
 #define X_STEP_PIN 29
 #define X_DIR_PIN 28

Marlin/pins_GEN7_CUSTOM.h

@@ -31,6 +31,8 @@
   #error "Oops!  Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME      "Gen7 Custom"
+
 //x axis pins
 #define X_STEP_PIN      21                  // different from standard GEN7
 #define X_DIR_PIN       20                  // different from standard GEN7

Marlin/pins_K8200.h

@@ -25,10 +25,8 @@
  * Identical to 3DRAG
  */
 
-#include "pins_3DRAG.h"
+#define BOARD_NAME              "Velleman K8200"
-
-#undef  DEFAULT_MACHINE_NAME
 #define DEFAULT_MACHINE_NAME    "K8200"
-
-#undef  DEFAULT_SOURCE_CODE_URL
 #define DEFAULT_SOURCE_CODE_URL "https://github.com/CONSULitAS/Marlin-K8200"
+
+#include "pins_3DRAG.h"

Marlin/pins_LEAPFROG.h

@@ -28,6 +28,8 @@
   #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME         "Leapfrog"
+
 #define X_STEP_PIN         28
 #define X_DIR_PIN          63
 #define X_ENABLE_PIN       29

Marlin/pins_MEGACONTROLLER.h

@@ -32,6 +32,8 @@
   #error "Mega Controller supports up to 2 extruders. Comment this line to keep going."
 #endif
 
+#define BOARD_NAME "Mega Controller"
+
 #define SERVO0_PIN 30
 #define SERVO1_PIN 31
 #define SERVO2_PIN 32

Marlin/pins_MEGATRONICS.h

@@ -28,6 +28,7 @@
   #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME         "Megatronics"
 #define LARGE_FLASH        true
 
 #define X_STEP_PIN         26

Marlin/pins_MEGATRONICS_2.h

@@ -28,6 +28,7 @@
   #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME         "Megatronics v2.0"
 #define LARGE_FLASH        true
 
 #define X_STEP_PIN 26

Marlin/pins_MEGATRONICS_3.h

@@ -28,6 +28,7 @@
   #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME         "Megatronics v3.0"
 #define LARGE_FLASH        true
 
 #if ENABLED(Z_PROBE_SLED)

Marlin/pins_MELZI.h

@@ -24,10 +24,11 @@
  * Melzi pin assignments
  */
 
-#define SANGUINOLOLU_V_1_2
+#define BOARD_NAME "Melzi"
 
 #if defined(__AVR_ATmega1284P__)
   #define LARGE_FLASH true
 #endif
 
+#define SANGUINOLOLU_V_1_2
 #include "pins_SANGUINOLOLU_11.h"

Marlin/pins_MELZI_MAKR3D.h

@@ -24,12 +24,11 @@
  * Melzi with ATmega1284 (MaKr3d version) pin assignments
  */
 
-#undef MOTHERBOARD
+#define BOARD_NAME "Melzi ATmega1284"
-#define MOTHERBOARD BOARD_MELZI
-#define SANGUINOLOLU_V_1_2
 
 #if defined(__AVR_ATmega1284P__)
   #define LARGE_FLASH true
 #endif
 
+#define SANGUINOLOLU_V_1_2
 #include "pins_SANGUINOLOLU_11.h"

Marlin/pins_MINIRAMBO.h

@@ -28,6 +28,7 @@
   #error "Oops!  Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME          "Mini Rambo"
 #define LARGE_FLASH         true
 
 #define X_STEP_PIN          37

Marlin/pins_MINITRONICS.h

@@ -28,6 +28,7 @@
   #error "Oops!  Make sure you have 'Minitronics' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME         "Minitronics v1.0 / v1.1"
 #define LARGE_FLASH        true
 
 #define X_STEP_PIN 48

Marlin/pins_MKS_13.h

@@ -29,6 +29,8 @@
  *  MKS v1.4  (Extruder, Extruder, Fan, Bed)
  */
 
+#define BOARD_NAME "MKS > v1.3"
+
 #include "pins_RAMPS_14_EFB.h"
 
 #undef HEATER_1_PIN

Marlin/pins_MKS_BASE.h

@@ -24,6 +24,8 @@
  * MKS BASE 1.0 – Arduino Mega2560 with RAMPS v1.4 pin assignments
  */
 
+#define BOARD_NAME "MKS BASE 1.0"
+
 #include "pins_RAMPS_14_EFB.h"
 
 #undef HEATER_1_PIN

Marlin/pins_OMCA.h

@@ -55,6 +55,8 @@
   #error "Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. (Final OMCA board)"
 #endif
 
+#define BOARD_NAME         "Final OMCA"
+
 #define X_STEP_PIN         26
 #define X_DIR_PIN          25
 #define X_ENABLE_PIN       10

Marlin/pins_OMCA_A.h

@@ -54,6 +54,8 @@
   #error "Oops!  Make sure you have 'SanguinoA' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME         "Alpha OMCA"
+
 #define X_STEP_PIN         21
 #define X_DIR_PIN          20
 #define X_ENABLE_PIN       24

Marlin/pins_PRINTRBOARD.h

@@ -35,6 +35,7 @@
   #error "These Printrboard assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h"
 #endif
 
+#define BOARD_NAME         "Printrboard"
 #define LARGE_FLASH        true
 
 // Disable JTAG pins so they can be used for the Extrudrboard

Marlin/pins_PRINTRBOARD_REVF.h

@@ -35,6 +35,7 @@
   #error "These Printrboard assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h"
 #endif
 
+#define BOARD_NAME         "Printrboard Rev F"
 #define LARGE_FLASH        true
 
 #define X_STEP_PIN          0

Marlin/pins_RAMBO.h

@@ -28,6 +28,8 @@
   #error "Oops!  Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME "Rambo"
+
 #define LARGE_FLASH true
 
 // Servo support

Marlin/pins_RAMPS_13.h

@@ -33,6 +33,9 @@
  *
  */
 
-#define IS_RAMPS_13
+#ifndef BOARD_NAME
+  #define BOARD_NAME "RAMPS 1.3"
+#endif
 
+#define IS_RAMPS_13
 #include "pins_RAMPS_14.h"

Marlin/pins_RAMPS_13_EFB.h

@@ -26,6 +26,7 @@
  *  RAMPS_13_EFB (Extruder, Fan, Bed)
  */
 
-#define IS_RAMPS_13
+#define BOARD_NAME "RAMPS 1.3 EFB"
 
+#define IS_RAMPS_13
 #include "pins_RAMPS_14_EFB.h"

Marlin/pins_RAMPS_14.h

@@ -48,6 +48,10 @@
   #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
 #endif
 
+#ifndef BOARD_NAME
+  #define BOARD_NAME "RAMPS 1.4"
+#endif
+
 #define LARGE_FLASH true
 
 #ifdef IS_RAMPS_13

Marlin/pins_RAMPS_14_EFB.h

@@ -26,6 +26,9 @@
  *  RAMPS_14_EFB (Extruder, Fan, Bed)
  */
 
-#define IS_RAMPS_EFB
+#ifndef BOARD_NAME
+  #define BOARD_NAME "RAMPS 1.4 EFB"
+#endif
 
+#define IS_RAMPS_EFB
 #include "pins_RAMPS_14.h"

Marlin/pins_RAMPS_OLD.h

@@ -28,6 +28,8 @@
   #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME         "MEGA/RAMPS <1.2"
+
 // Uncomment the following line for RAMPS v1.0
 //#define RAMPS_V_1_0
 

Marlin/pins_RIGIDBOARD.h

@@ -26,6 +26,9 @@
 
 #include "pins_RAMPS_14.h"
 
+#undef BOARD_NAME
+#define BOARD_NAME "RigidBoard"
+
 #if ENABLED(Z_MIN_PROBE_ENDSTOP)
   #undef Z_MAX_PIN
   #define Z_MAX_PIN -1

Marlin/pins_RIGIDBOARD_V2.h

@@ -26,6 +26,9 @@
 
 #include "pins_RIGIDBOARD.h"
 
+#undef BOARD_NAME
+#define BOARD_NAME "RigidBoard V2"
+
 // I2C based DAC like on the Printrboard REVF
 #define DAC_STEPPER_CURRENT
 // Channels available for DAC, For Rigidboard there are 4

Marlin/pins_RUMBA.h

@@ -33,6 +33,7 @@
 #endif
 
 #define DEFAULT_MACHINE_NAME "Rumba"
+#define BOARD_NAME           "Rumba"
 
 #define X_STEP_PIN         17
 #define X_DIR_PIN          16

Marlin/pins_SAINSMART_2IN1.h

@@ -26,6 +26,9 @@
 
 #include "pins_RAMPS_14_EFB.h"
 
+#undef BOARD_NAME
+#define BOARD_NAME          "Sainsmart"
+
 #undef FAN_PIN
 #define FAN_PIN             7 // PART FAN in front of board next to Extruder heat
 

Marlin/pins_SANGUINOLOLU_11.h

@@ -28,6 +28,12 @@
   #error "Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
 #endif
 
+#ifndef BOARD_NAME
+  #define BOARD_NAME "Sanguinololu <1.2"
+#endif
+
+#define IS_MELZI (MB(MELZI) || MB(MELZI_MAKR3D))
+
 #define X_STEP_PIN         15
 #define X_DIR_PIN          21
 #define X_STOP_PIN         18
@@ -43,11 +49,11 @@
 #define E0_STEP_PIN         1
 #define E0_DIR_PIN          0
 
-#if MB(AZTEEG_X1) || MB(STB_11) || MB(MELZI)
+#if MB(AZTEEG_X1) || MB(STB_11) || IS_MELZI
   #define FAN_PIN           4 // Works for Panelolu2 too
 #endif
 
-#if MB(MELZI)
+#if IS_MELZI
   #define LED_PIN          27 // On some broken versions of the Sanguino libraries the pin definitions are wrong, so LED_PIN needs to be 28. But you should upgrade your Sanguino libraries! See #368.
 #elif MB(STB_11)
   #define LCD_PIN_BL       17 // LCD backlight LED
@@ -101,7 +107,7 @@
 
     #if ENABLED(U8GLIB_ST7920) //SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0
 
-      #if MB(MELZI) // Melzi board
+      #if IS_MELZI // Melzi board
         #define LCD_PINS_RS     30 //CS chip select /SS chip slave select
         #define LCD_PINS_ENABLE 29 //SID (MOSI)
         #define LCD_PINS_D4     17 //SCK (CLK) clock
@@ -147,7 +153,7 @@
   #define BTN_EN1               11
   #define BTN_EN2               10
   #if ENABLED(LCD_I2C_PANELOLU2)
-    #if MB(MELZI)
+    #if IS_MELZI
       #define BTN_ENC           29
       #define LCD_SDSS          30 // Panelolu2 SD card reader rather than the Melzi
     #else

Marlin/pins_SANGUINOLOLU_12.h

@@ -32,10 +32,11 @@
  *  STB_11
  */
 
-#define SANGUINOLOLU_V_1_2
+#define BOARD_NAME "Sanguinololu 1.2"
 
 #if defined(__AVR_ATmega1284P__)
   #define LARGE_FLASH true
 #endif
 
+#define SANGUINOLOLU_V_1_2
 #include "pins_SANGUINOLOLU_11.h"

Marlin/pins_SAV_MKI.h

@@ -33,6 +33,7 @@
 
 #define DEFAULT_MACHINE_NAME    "SAV MkI"
 #define DEFAULT_SOURCE_CODE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config"
+#define BOARD_NAME              "SAV MkI"
 
 #define LARGE_FLASH        true
 

Marlin/pins_SETHI.h

@@ -28,6 +28,8 @@
   #error "Oops!  Make sure you have 'Sethi 3D' selected from the 'Tools -> Boards' menu."
 #endif
 
+#define BOARD_NAME "Sethi 3D_1"
+
 #ifndef GEN7_VERSION
   #define GEN7_VERSION 12 // v1.x
 #endif

Marlin/pins_STB_11.h

@@ -24,10 +24,11 @@
  * STB V1.1 pin assignments
  */
 
-#define SANGUINOLOLU_V_1_2
+#define BOARD_NAME "STB V1.1"
 
 #if defined(__AVR_ATmega1284P__)
   #define LARGE_FLASH true
 #endif
 
+#define SANGUINOLOLU_V_1_2
 #include "pins_SANGUINOLOLU_11.h"

Marlin/pins_TEENSY2.h

@@ -74,6 +74,8 @@
   // (or build from command line)
 #endif
 
+#define BOARD_NAME         "Teensy++2.0"
+
 #define LARGE_FLASH        true
 
 #define X_STEP_PIN         28 //  0 Marlin

Marlin/pins_TEENSYLU.h

@@ -35,6 +35,8 @@
   #error "These Teensylu assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h"
 #endif
 
+#define BOARD_NAME         "Teensylu"
+
 #define LARGE_FLASH        true
 
 #define X_STEP_PIN          0

Marlin/pins_ULTIMAIN_2.h

@@ -30,6 +30,7 @@
 
 #define DEFAULT_MACHINE_NAME    "Ultimaker"
 #define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"
+#define BOARD_NAME              "Ultimaker 2.x"
 
 #define X_STEP_PIN 25
 #define X_DIR_PIN 23

Marlin/pins_ULTIMAKER.h

@@ -30,6 +30,7 @@
 
 #define DEFAULT_MACHINE_NAME    "Ultimaker"
 #define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"
+#define BOARD_NAME              "Ultimaker"
 
 #define LARGE_FLASH true
 

Marlin/pins_ULTIMAKER_OLD.h

@@ -30,6 +30,7 @@
 
 #define DEFAULT_MACHINE_NAME    "Ultimaker"
 #define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"
+#define BOARD_NAME              "Ultimaker <1.5.4"
 
 #define LARGE_FLASH true
 

Marlin/printcounter.cpp

@@ -88,7 +88,7 @@ void PrintCounter::showStats() {
   SERIAL_ECHO(this->data.totalPrints - this->data.finishedPrints
     - ((this->isRunning() || this->isPaused()) ? 1 : 0)); // Removes 1 from failures with an active counter
 
-  uint32_t t = this->data.printTime /60;
+  uint32_t t = this->data.printTime / 60;
   SERIAL_ECHOPGM(", Total print time: ");
   SERIAL_ECHO(t / 60);
 

Marlin/printcounter.h

@@ -131,6 +131,12 @@ class PrintCounter: public Stopwatch {
      */
     void showStats();
 
+    /**
+     * @brief Return the currently loaded statistics
+     * @details Return the raw data, in the same structure used internally
+     */
+    printStatistics getStats() { return this->data; }
+
     /**
      * @brief Loop function
      * @details This function should be called at loop, it will take care of

Marlin/thermistornames.h

@@ -0,0 +1,91 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#undef THERMISTOR_NAME
+
+// Thermcouples
+#if THERMISTOR_ID == -3
+  #define THERMISTOR_NAME "MAX31855"
+#elif THERMISTOR_ID == -2
+  #define THERMISTOR_NAME "MAX6675"
+#elif THERMISTOR_ID == -1
+  #define THERMISTOR_NAME "AD595"
+
+// Standard thermistors
+#elif THERMISTOR_ID == 1
+  #define THERMISTOR_NAME "EPCOS 100K"
+#elif THERMISTOR_ID == 2
+  #define THERMISTOR_NAME "ATC 204GT-2"
+#elif THERMISTOR_ID == 3
+  #define THERMISTOR_NAME "Mendel-parts"
+#elif THERMISTOR_ID == 4
+  #define THERMISTOR_NAME "Generic 10K"
+#elif THERMISTOR_ID == 5
+  #define THERMISTOR_NAME "ATC 104GT-2"
+#elif THERMISTOR_ID == 6
+  #define THERMISTOR_NAME "EPCOS (alt)"
+#elif THERMISTOR_ID == 7
+  #define THERMISTOR_NAME "HW 104LAG"
+#elif THERMISTOR_ID == 71
+  #define THERMISTOR_NAME "HW 104LAF"
+#elif THERMISTOR_ID == 8
+  #define THERMISTOR_NAME "E3104FXT"
+#elif THERMISTOR_ID == 9
+  #define THERMISTOR_NAME "GE AL03006"
+#elif THERMISTOR_ID == 10
+  #define THERMISTOR_NAME "RS 198-961"
+#elif THERMISTOR_ID == 11
+  #define THERMISTOR_NAME "1% beta 3950"
+#elif THERMISTOR_ID == 12
+  #define THERMISTOR_NAME "E3104FXT (alt)"
+#elif THERMISTOR_ID == 13
+  #define THERMISTOR_NAME "Hisens 3950"
+#elif THERMISTOR_ID == 20
+  #define THERMISTOR_NAME "PT100 UltiMB"
+#elif THERMISTOR_ID == 60
+  #define THERMISTOR_NAME "Makers Tool"
+#elif THERMISTOR_ID == 70
+  #define THERMISTOR_NAME "Hephestos 2"
+
+// Modified thermistors
+#elif THERMISTOR_ID == 51
+  #define THERMISTOR_NAME "EPCOS 1K"
+#elif THERMISTOR_ID == 52
+  #define THERMISTOR_NAME "ATC204GT-2 1K"
+#elif THERMISTOR_ID == 55
+  #define THERMISTOR_NAME "ATC104GT-2 1K"
+#elif THERMISTOR_ID == 1047
+  #define THERMISTOR_NAME "PT1000 4K7"
+#elif THERMISTOR_ID == 1010
+  #define THERMISTOR_NAME "PT1000 1K"
+#elif THERMISTOR_ID == 147
+  #define THERMISTOR_NAME "PT100 4K7"
+#elif THERMISTOR_ID == 110
+  #define THERMISTOR_NAME "PT100 1K"
+
+// Dummies for dev testing
+#elif THERMISTOR_ID == 998
+  #define THERMISTOR_NAME "Dummy 1"
+#elif THERMISTOR_ID == 999
+  #define THERMISTOR_NAME "Dummy 2"
+
+#endif // THERMISTOR_ID

Marlin/ultralcd.cpp

@@ -29,6 +29,10 @@
 #include "stepper.h"
 #include "configuration_store.h"
 
+#if ENABLED(PRINTCOUNTER)
+  #include "printcounter.h"
+#endif
+
 int plaPreheatHotendTemp;
 int plaPreheatHPBTemp;
 int plaPreheatFanSpeed;
@@ -117,6 +121,15 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
   static void lcd_control_motion_menu();
   static void lcd_control_volumetric_menu();
 
+  #if ENABLED(LCD_INFO_MENU)
+    #if ENABLED(PRINTCOUNTER)
+      static void lcd_info_stats_menu();
+    #endif
+    static void lcd_info_thermistors_menu();
+    static void lcd_info_board_menu();
+    static void lcd_info_menu();
+  #endif
+
   #if HAS_LCD_CONTRAST
     static void lcd_set_contrast();
   #endif
@@ -189,6 +202,12 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
 
   /**
    * START_MENU generates the init code for a menu function
+   *
+   *   encoderLine is the position based on the encoder
+   *   currentMenuViewOffset is the top menu line to display
+   *   _drawLineNr is the index of the LCD line (0-3)
+   *   _lineNr is the menu item to draw and process
+   *   _menuItemNr is the index of each MENU_ITEM
    */
   #define START_MENU() do { \
     ENCODER_DIRECTION_MENUS(); \
@@ -242,6 +261,16 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
       _MENU_ITEM_PART_2(type, ## args); \
     } while(0)
 
+  // Used to print static text with no visible cursor.
+  #define STATIC_ITEM(label, args...) \
+    if (_menuItemNr == _lineNr) { \
+      if (encoderLine == _menuItemNr && _menuItemNr < LCD_HEIGHT - 1) \
+        encoderPosition += ENCODER_STEPS_PER_MENU_ITEM; \
+      if (lcdDrawUpdate) \
+        lcd_implementation_drawmenu_static(_drawLineNr, PSTR(label), ## args); \
+    } \
+    _menuItemNr++
+
   #if ENABLED(ENCODER_RATE_MULTIPLIER)
 
     //#define ENCODER_RATE_MULTIPLIER_DEBUG  // If defined, output the encoder steps per second value
@@ -554,6 +583,10 @@ static void lcd_status_screen() {
       }
     #endif //SDSUPPORT
 
+    #if ENABLED(LCD_INFO_MENU)
+      MENU_ITEM(submenu, MSG_INFO_MENU, lcd_info_menu);
+    #endif
+
     END_MENU();
   }
 
@@ -1870,6 +1903,139 @@ static void lcd_status_screen() {
 
   #endif //SDSUPPORT
 
+  #if ENABLED(LCD_INFO_MENU)
+
+    #if ENABLED(PRINTCOUNTER)
+      /**
+       *
+       * About Printer > Stastics submenu
+       *
+       */
+      static void lcd_info_stats_menu() {
+        PrintCounter print_job_counter = PrintCounter();
+        print_job_counter.loadStats();
+        printStatistics stats = print_job_counter.getStats();
+
+        char printTime[6];
+        sprintf(printTime, "%02d:%02d", stats.printTime / 60, stats.printTime % 60);
+
+        if (LCD_CLICKED) lcd_goto_previous_menu(true);
+        START_MENU();
+        STATIC_ITEM(MSG_INFO_TOTAL_PRINTS ": ", itostr3left(stats.totalPrints));       // Total Prints: 999
+        STATIC_ITEM(MSG_INFO_FINISHED_PRINTS ": ", itostr3left(stats.finishedPrints)); // Finished Prints: 666
+        STATIC_ITEM(MSG_INFO_PRINT_TIME ": ", printTime);                              // Total Print Time: 123456
+        END_MENU();
+      }
+    #endif // PRINTCOUNTER
+
+    /**
+     *
+     * About Printer > Thermistors
+     *
+     */
+    static void lcd_info_thermistors_menu() {
+      if (LCD_CLICKED) lcd_goto_previous_menu(true);
+      START_MENU();
+      #define THERMISTOR_ID TEMP_SENSOR_0
+      #include "thermistornames.h"
+      STATIC_ITEM("T0: " THERMISTOR_NAME);
+      STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_0_MINTEMP));
+      STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_0_MAXTEMP));
+
+      #if TEMP_SENSOR_1 != 0
+        #undef THERMISTOR_ID
+        #define THERMISTOR_ID TEMP_SENSOR_1
+        #include "thermistornames.h"
+        STATIC_ITEM("T1: " THERMISTOR_NAME);
+        STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_1_MINTEMP));
+        STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_1_MAXTEMP));
+      #endif
+
+      #if TEMP_SENSOR_2 != 0
+        #undef THERMISTOR_ID
+        #define THERMISTOR_ID TEMP_SENSOR_2
+        #include "thermistornames.h"
+        STATIC_ITEM("T2: " THERMISTOR_NAME);
+        STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_2_MINTEMP));
+        STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_2_MAXTEMP));
+      #endif
+
+      #if TEMP_SENSOR_3 != 0
+        #undef THERMISTOR_ID
+        #define THERMISTOR_ID TEMP_SENSOR_3
+        #include "thermistornames.h"
+        STATIC_ITEM("T3: " THERMISTOR_NAME);
+        STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_3_MINTEMP));
+        STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_3_MAXTEMP));
+      #endif
+
+      #if TEMP_SENSOR_BED != 0
+        #undef THERMISTOR_ID
+        #define THERMISTOR_ID TEMP_SENSOR_BED
+        #include "thermistornames.h"
+        STATIC_ITEM("TBed:" THERMISTOR_NAME);
+        STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(BED_MINTEMP));
+        STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(BED_MAXTEMP));
+      #endif
+      END_MENU();
+    }
+
+    /**
+     *
+     * About Printer > Board Info
+     *
+     */
+    static void lcd_info_board_menu() {
+      if (LCD_CLICKED) lcd_goto_previous_menu(true);
+      START_MENU();
+      STATIC_ITEM(BOARD_NAME);                                 // MyPrinterController
+      STATIC_ITEM(MSG_INFO_BAUDRATE ": " STRINGIFY(BAUDRATE)); // Baud: 250000
+      STATIC_ITEM(MSG_INFO_PROTOCOL ": " PROTOCOL_VERSION);    // Protocol: 1.0
+      #ifdef POWER_SUPPLY
+        #if (POWER_SUPPLY == 1)
+          STATIC_ITEM(MSG_INFO_PSU ": ATX");  // Power Supply: ATX
+        #elif (POWER_SUPPLY == 2)
+          STATIC_ITEM(MSG_INFO_PSU ": XBox"); // Power Supply: XBox
+        #endif
+      #endif // POWER_SUPPLY
+      END_MENU();
+    }
+
+    /**
+     *
+     * About Printer > Printer Info
+     *
+     */
+    static void lcd_info_printer_menu() {
+      if (LCD_CLICKED) lcd_goto_previous_menu(true);
+      START_MENU();
+      STATIC_ITEM(MSG_MARLIN);                                   // Marlin
+      STATIC_ITEM(SHORT_BUILD_VERSION);                          // x.x.x-Branch
+      STATIC_ITEM(STRING_DISTRIBUTION_DATE);                     // YYYY-MM-DD HH:MM
+      STATIC_ITEM(MACHINE_NAME);                                 // My3DPrinter
+      STATIC_ITEM(WEBSITE_URL);                                  // www.my3dprinter.com
+      STATIC_ITEM(MSG_INFO_EXTRUDERS ": " STRINGIFY(EXTRUDERS)); // Extruders: 2
+      END_MENU();
+    }
+
+    /**
+     *
+     * "About Printer" submenu
+     *
+     */
+    static void lcd_info_menu() {
+      START_MENU();
+      MENU_ITEM(back, MSG_MAIN);
+      MENU_ITEM(submenu, MSG_INFO_PRINTER_MENU, lcd_info_printer_menu);        // Printer Info >
+      MENU_ITEM(submenu, MSG_INFO_BOARD_MENU, lcd_info_board_menu);            // Board Info >
+      MENU_ITEM(submenu, MSG_INFO_THERMISTOR_MENU, lcd_info_thermistors_menu); // Thermistors >
+      #if ENABLED(PRINTCOUNTER)
+        MENU_ITEM(submenu, MSG_INFO_STATS_MENU, lcd_info_stats_menu);          // Printer Statistics >
+      #endif
+      END_MENU();
+    }
+  #endif // LCD_INFO_MENU
+
   /**
    *
    * Functions for editing single values
@@ -2573,7 +2739,6 @@ char *ftostr4sign(const float& x) { return itostr4sign((int)x); }
 
 // Convert unsigned int to string with 12 format
 char* itostr2(const uint8_t& x) {
-  //sprintf(conv,"%5.1f",x);
   int xx = x;
   conv[0] = DIGIMOD(xx / 10);
   conv[1] = DIGIMOD(xx);

Marlin/ultralcd_implementation_hitachi_HD44780.h

@@ -815,6 +815,29 @@ static void lcd_implementation_status_screen() {
   lcd_print(lcd_status_message);
 }
 
+#if ENABLED(LCD_INFO_MENU)
+
+  static void lcd_implementation_drawmenu_static(uint8_t row, const char* pstr, const char *valstr=NULL, bool center=true) {
+    char c;
+    int8_t n = LCD_WIDTH;
+    lcd.setCursor(0, row);
+    if (center) {
+      int8_t pad = (LCD_WIDTH - lcd_strlen_P(pstr)) / 2;
+      while (--pad >= 0) { lcd.print(' '); n--; }
+    }
+    while ((c = pgm_read_byte(pstr)) && n > 0) {
+      n -= lcd_print(c);
+      pstr++;
+    }
+    if (valstr) {
+      lcd_print(valstr);
+      n -= lcd_strlen(valstr);
+    }
+    while (n-- > 0) lcd.print(' ');
+  }
+
+#endif // LCD_INFO_MENU
+
 static void lcd_implementation_drawmenu_generic(bool sel, uint8_t row, const char* pstr, char pre_char, char post_char) {
   char c;
   uint8_t n = LCD_WIDTH - 2;