From 4a897310252341f203371cb2e99f93bf9c035143 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 12 Jan 2021 20:43:52 -0600 Subject: [PATCH] Rotary encoder cleanup (#20753) --- Marlin/src/HAL/LPC1768/inc/SanityCheck.h | 2 +- Marlin/src/inc/SanityCheck.h | 2 +- Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.h | 11 +- Marlin/src/lcd/buttons.h | 234 ++++++++++++++++++ Marlin/src/lcd/dwin/e3v2/rotary_encoder.cpp | 144 +++++------ Marlin/src/lcd/dwin/e3v2/rotary_encoder.h | 23 +- .../lib/mks_ui/tft_lvgl_configuration.cpp | 18 +- Marlin/src/lcd/lcdprint.h | 18 +- Marlin/src/lcd/marlinui.cpp | 130 ++++------ Marlin/src/lcd/marlinui.h | 142 +---------- Marlin/src/lcd/touch/touch_buttons.cpp | 4 +- Marlin/src/pins/linux/pins_RAMPS_LINUX.h | 14 +- Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h | 14 +- Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h | 14 +- Marlin/src/pins/mega/pins_CNCONTROLS_11.h | 6 +- Marlin/src/pins/mega/pins_CNCONTROLS_12.h | 6 +- Marlin/src/pins/mega/pins_GT2560_REV_A.h | 8 +- Marlin/src/pins/mega/pins_HJC2560C_REV2.h | 8 +- Marlin/src/pins/mega/pins_MEGATRONICS_2.h | 8 +- Marlin/src/pins/mega/pins_MEGATRONICS_3.h | 8 +- Marlin/src/pins/pinsDebug_list.h | 16 +- Marlin/src/pins/rambo/pins_RAMBO.h | 8 +- Marlin/src/pins/ramps/pins_RAMPS.h | 14 +- Marlin/src/pins/ramps/pins_TT_OSCAR.h | 14 +- Marlin/src/pins/ramps/pins_ULTIMAKER.h | 8 +- Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h | 8 +- Marlin/src/pins/ramps/pins_ZRIB_V20.h | 6 +- Marlin/src/pins/samd/pins_RAMPS_144.h | 14 +- Marlin/src/pins/stm32f1/pins_CHITU3D.h | 14 +- Marlin/src/pins/teensy3/pins_TEENSY35_36.h | 6 +- 30 files changed, 484 insertions(+), 438 deletions(-) create mode 100644 Marlin/src/lcd/buttons.h diff --git a/Marlin/src/HAL/LPC1768/inc/SanityCheck.h b/Marlin/src/HAL/LPC1768/inc/SanityCheck.h index 11b8761550..14890bcd6e 100644 --- a/Marlin/src/HAL/LPC1768/inc/SanityCheck.h +++ b/Marlin/src/HAL/LPC1768/inc/SanityCheck.h @@ -116,7 +116,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o #elif HAS_WIRED_LCD #if IS_TX1(BTN_EN2) || IS_RX1(BTN_EN1) #error "Serial port pins (1) conflict with Encoder Buttons!" - #elif ANY_TX(1, SD_SCK_PIN, LCD_PINS_D4, DOGLCD_SCK, LCD_RESET_PIN, LCD_PINS_RS, SHIFT_CLK) \ + #elif ANY_TX(1, SD_SCK_PIN, LCD_PINS_D4, DOGLCD_SCK, LCD_RESET_PIN, LCD_PINS_RS, SHIFT_CLK_PIN) \ || ANY_RX(1, LCD_SDSS, LCD_PINS_RS, SD_MISO_PIN, DOGLCD_A0, SD_SS_PIN, LCD_SDSS, DOGLCD_CS, LCD_RESET_PIN, LCD_BACKLIGHT_PIN) #error "Serial port pins (1) conflict with LCD pins!" #endif diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 7ebb9168f6..2547425885 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -1595,7 +1595,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal /** * ULTIPANEL encoder */ -#if IS_ULTIPANEL && NONE(IS_NEWPANEL, SR_LCD_2W_NL) && !defined(SHIFT_CLK) +#if IS_ULTIPANEL && NONE(IS_NEWPANEL, SR_LCD_2W_NL) && !PIN_EXISTS(SHIFT_CLK) #error "ULTIPANEL controllers require some kind of encoder." #endif diff --git a/Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.h b/Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.h index eedcc4afa0..c399b907e4 100644 --- a/Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.h +++ b/Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.h @@ -61,15 +61,12 @@ extern TFTGLCD lcd; #include "../lcdprint.h" // Use panel encoder - free old encoder pins -#undef BTN_EN1 -#undef BTN_EN2 -#undef BTN_ENC -#define BTN_EN1 -1 -#define BTN_EN2 -1 -#define BTN_ENC -1 +#undef BTN_EN1 +#undef BTN_EN2 +#undef BTN_ENC #ifndef EN_C - #define EN_C 4 //for click + #define EN_C 4 // for click #endif #endif // IS_TFTGLCD_PANEL diff --git a/Marlin/src/lcd/buttons.h b/Marlin/src/lcd/buttons.h new file mode 100644 index 0000000000..07a4524def --- /dev/null +++ b/Marlin/src/lcd/buttons.h @@ -0,0 +1,234 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "../inc/MarlinConfig.h" + +#if ((!HAS_ADC_BUTTONS && IS_NEWPANEL) || BUTTONS_EXIST(EN1, EN2)) && !IS_TFTGLCD_PANEL + #define HAS_ENCODER_WHEEL 1 +#endif +#if HAS_ENCODER_WHEEL || ANY_BUTTON(ENC, BACK, UP, DWN, LFT, RT) + #define HAS_DIGITAL_BUTTONS 1 +#endif +#if !HAS_ADC_BUTTONS && (IS_RRW_KEYPAD || (HAS_WIRED_LCD && !IS_NEWPANEL)) + #define HAS_SHIFT_ENCODER 1 +#endif + +// I2C buttons must be read in the main thread +#if ANY(LCD_I2C_VIKI, LCD_I2C_PANELOLU2, IS_TFTGLCD_PANEL) + #define HAS_SLOW_BUTTONS 1 +#endif + +#if HAS_ENCODER_WHEEL + #define ENCODER_PHASE_0 0 + #define ENCODER_PHASE_1 2 + #define ENCODER_PHASE_2 3 + #define ENCODER_PHASE_3 1 +#endif + +#if EITHER(HAS_DIGITAL_BUTTONS, DWIN_CREALITY_LCD) + + // Wheel spin pins where BA is 00, 10, 11, 01 (1 bit always changes) + #define BLEN_A 0 + #define BLEN_B 1 + + #define EN_A _BV(BLEN_A) + #define EN_B _BV(BLEN_B) + + #define _BUTTON_PRESSED(BN) !READ(BTN_##BN) + + #if BUTTON_EXISTS(ENC) || HAS_TOUCH_BUTTONS + #define BLEN_C 2 + #define EN_C _BV(BLEN_C) + #endif + + #if ENABLED(LCD_I2C_VIKI) + + #include + + #define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C) + + // button and encoder bit positions within 'buttons' + #define B_LE (BUTTON_LEFT << B_I2C_BTN_OFFSET) // The remaining normalized buttons are all read via I2C + #define B_UP (BUTTON_UP << B_I2C_BTN_OFFSET) + #define B_MI (BUTTON_SELECT << B_I2C_BTN_OFFSET) + #define B_DW (BUTTON_DOWN << B_I2C_BTN_OFFSET) + #define B_RI (BUTTON_RIGHT << B_I2C_BTN_OFFSET) + + #if BUTTON_EXISTS(ENC) // The pause/stop/restart button is connected to BTN_ENC when used + #define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name + #define BUTTON_CLICK() (buttons & (B_MI|B_RI|B_ST)) // Pause/stop also acts as click until a proper pause/stop is implemented. + #else + #define BUTTON_CLICK() (buttons & (B_MI|B_RI)) + #endif + + // I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update + + #elif ENABLED(LCD_I2C_PANELOLU2) + + #if !BUTTON_EXISTS(ENC) // Use I2C if not directly connected to a pin + + #define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C) + + #define B_MI (PANELOLU2_ENCODER_C << B_I2C_BTN_OFFSET) // requires LiquidTWI2 library v1.2.3 or later + + #define BUTTON_CLICK() (buttons & B_MI) + + #endif + + #endif + +#else + + #undef BUTTON_EXISTS + #define BUTTON_EXISTS(...) false + + // Dummy button, never pressed + #define _BUTTON_PRESSED(BN) false + + // Shift register bits correspond to buttons: + #define BL_LE 7 // Left + #define BL_UP 6 // Up + #define BL_MI 5 // Middle + #define BL_DW 4 // Down + #define BL_RI 3 // Right + #define BL_ST 2 // Red Button + #define B_LE _BV(BL_LE) + #define B_UP _BV(BL_UP) + #define B_MI _BV(BL_MI) + #define B_DW _BV(BL_DW) + #define B_RI _BV(BL_RI) + #define B_ST _BV(BL_ST) + + #ifndef BUTTON_CLICK + #define BUTTON_CLICK() (buttons & (B_MI|B_ST)) + #endif + +#endif + +#if IS_RRW_KEYPAD + #define BTN_OFFSET 0 // Bit offset into buttons for shift register values + + #define BLEN_KEYPAD_F3 0 + #define BLEN_KEYPAD_F2 1 + #define BLEN_KEYPAD_F1 2 + #define BLEN_KEYPAD_DOWN 3 + #define BLEN_KEYPAD_RIGHT 4 + #define BLEN_KEYPAD_MIDDLE 5 + #define BLEN_KEYPAD_UP 6 + #define BLEN_KEYPAD_LEFT 7 + + #define EN_KEYPAD_F1 _BV(BTN_OFFSET + BLEN_KEYPAD_F1) + #define EN_KEYPAD_F2 _BV(BTN_OFFSET + BLEN_KEYPAD_F2) + #define EN_KEYPAD_F3 _BV(BTN_OFFSET + BLEN_KEYPAD_F3) + #define EN_KEYPAD_DOWN _BV(BTN_OFFSET + BLEN_KEYPAD_DOWN) + #define EN_KEYPAD_RIGHT _BV(BTN_OFFSET + BLEN_KEYPAD_RIGHT) + #define EN_KEYPAD_MIDDLE _BV(BTN_OFFSET + BLEN_KEYPAD_MIDDLE) + #define EN_KEYPAD_UP _BV(BTN_OFFSET + BLEN_KEYPAD_UP) + #define EN_KEYPAD_LEFT _BV(BTN_OFFSET + BLEN_KEYPAD_LEFT) + + #define RRK(B) (keypad_buttons & (B)) + + #ifdef EN_C + #define BUTTON_CLICK() ((buttons & EN_C) || RRK(EN_KEYPAD_MIDDLE)) + #else + #define BUTTON_CLICK() RRK(EN_KEYPAD_MIDDLE) + #endif +#endif + +#ifndef EN_A + #define EN_A 0 +#endif +#ifndef EN_B + #define EN_B 0 +#endif +#ifndef EN_C + #define EN_C 0 +#endif +#if BUTTON_EXISTS(BACK) || EITHER(HAS_TOUCH_BUTTONS, IS_TFTGLCD_PANEL) + #define BLEN_D 3 + #define EN_D _BV(BLEN_D) +#else + #define EN_D 0 +#endif + +#define BUTTON_PRESSED(BN) (_BUTTON_PRESSED_##BN) + +#if BUTTON_EXISTS(EN1) + #define _BUTTON_PRESSED_EN1 _BUTTON_PRESSED(EN1) +#else + #define _BUTTON_PRESSED_EN1 false +#endif +#if BUTTON_EXISTS(EN2) + #define _BUTTON_PRESSED_EN2 _BUTTON_PRESSED(EN2) +#else + #define _BUTTON_PRESSED_EN2 false +#endif +#if BUTTON_EXISTS(ENC_EN) + #define _BUTTON_PRESSED_ENC_EN _BUTTON_PRESSED(ENC_EN) +#else + #define _BUTTON_PRESSED_ENC_EN false +#endif +#if BUTTON_EXISTS(ENC) + #define _BUTTON_PRESSED_ENC _BUTTON_PRESSED(ENC) +#else + #define _BUTTON_PRESSED_ENC false +#endif +#if BUTTON_EXISTS(UP) + #define _BUTTON_PRESSED_UP _BUTTON_PRESSED(UP) +#else + #define _BUTTON_PRESSED_UP false +#endif +#if BUTTON_EXISTS(DWN) + #define _BUTTON_PRESSED_DWN _BUTTON_PRESSED(DWN) +#else + #define _BUTTON_PRESSED_DWN false +#endif +#if BUTTON_EXISTS(LFT) + #define _BUTTON_PRESSED_LFT _BUTTON_PRESSED(LFT) +#else + #define _BUTTON_PRESSED_LFT false +#endif +#if BUTTON_EXISTS(RT) + #define _BUTTON_PRESSED_RT _BUTTON_PRESSED(RT) +#else + #define _BUTTON_PRESSED_RT false +#endif +#if BUTTON_EXISTS(BACK) + #define _BUTTON_PRESSED_BACK _BUTTON_PRESSED(BACK) +#else + #define _BUTTON_PRESSED_BACK false +#endif + +#ifndef BUTTON_CLICK + #if EN_C > 0 + #define BUTTON_CLICK() (buttons & EN_C) + #else + #define BUTTON_CLICK() false + #endif +#endif + +#if EN_D > 0 + #define LCD_BACK_CLICKED() (buttons & EN_D) +#else + #define LCD_BACK_CLICKED() false +#endif diff --git a/Marlin/src/lcd/dwin/e3v2/rotary_encoder.cpp b/Marlin/src/lcd/dwin/e3v2/rotary_encoder.cpp index d39c6cfbd5..6c229b7aca 100644 --- a/Marlin/src/lcd/dwin/e3v2/rotary_encoder.cpp +++ b/Marlin/src/lcd/dwin/e3v2/rotary_encoder.cpp @@ -33,6 +33,7 @@ #if ENABLED(DWIN_CREALITY_LCD) #include "rotary_encoder.h" +#include "../../buttons.h" #include "../../../MarlinCore.h" #include "../../../HAL/shared/Delay.h" @@ -43,17 +44,23 @@ #include +#ifndef ENCODER_PULSES_PER_STEP + #define ENCODER_PULSES_PER_STEP 4 +#endif + ENCODER_Rate EncoderRate; // Buzzer -void Encoder_tick(void) { - WRITE(BEEPER_PIN, 1); - delay(10); - WRITE(BEEPER_PIN, 0); +void Encoder_tick() { + #if PIN_EXISTS(BEEPER) + WRITE(BEEPER_PIN, HIGH); + delay(10); + WRITE(BEEPER_PIN, LOW); + #endif } // Encoder initialization -void Encoder_Configuration(void) { +void Encoder_Configuration() { #if BUTTON_EXISTS(EN1) SET_INPUT_PULLUP(BTN_EN1); #endif @@ -63,21 +70,21 @@ void Encoder_Configuration(void) { #if BUTTON_EXISTS(ENC) SET_INPUT_PULLUP(BTN_ENC); #endif - #ifdef BEEPER_PIN + #if PIN_EXISTS(BEEPER) SET_OUTPUT(BEEPER_PIN); #endif } // Analyze encoder value and return state -ENCODER_DiffState Encoder_ReceiveAnalyze(void) { +ENCODER_DiffState Encoder_ReceiveAnalyze() { const millis_t now = millis(); - static unsigned char lastEncoderBits; - unsigned char newbutton = 0; + static uint8_t lastEncoderBits; + uint8_t newbutton = 0; static signed char temp_diff = 0; ENCODER_DiffState temp_diffState = ENCODER_DIFF_NO; - if (BUTTON_PRESSED(EN1)) newbutton |= 0x01; - if (BUTTON_PRESSED(EN2)) newbutton |= 0x02; + if (BUTTON_PRESSED(EN1)) newbutton |= EN_A; + if (BUTTON_PRESSED(EN2)) newbutton |= EN_B; if (BUTTON_PRESSED(ENC)) { static millis_t next_click_update_ms; if (ELAPSED(now, next_click_update_ms)) { @@ -94,22 +101,22 @@ ENCODER_DiffState Encoder_ReceiveAnalyze(void) { } if (newbutton != lastEncoderBits) { switch (newbutton) { - case ENCODER_PHASE_0: { - if (lastEncoderBits == ENCODER_PHASE_3) temp_diff++; + case ENCODER_PHASE_0: + if (lastEncoderBits == ENCODER_PHASE_3) temp_diff++; else if (lastEncoderBits == ENCODER_PHASE_1) temp_diff--; - }break; - case ENCODER_PHASE_1: { - if (lastEncoderBits == ENCODER_PHASE_0) temp_diff++; + break; + case ENCODER_PHASE_1: + if (lastEncoderBits == ENCODER_PHASE_0) temp_diff++; else if (lastEncoderBits == ENCODER_PHASE_2) temp_diff--; - }break; - case ENCODER_PHASE_2: { - if (lastEncoderBits == ENCODER_PHASE_1) temp_diff++; + break; + case ENCODER_PHASE_2: + if (lastEncoderBits == ENCODER_PHASE_1) temp_diff++; else if (lastEncoderBits == ENCODER_PHASE_3) temp_diff--; - }break; - case ENCODER_PHASE_3: { - if (lastEncoderBits == ENCODER_PHASE_2) temp_diff++; + break; + case ENCODER_PHASE_3: + if (lastEncoderBits == ENCODER_PHASE_2) temp_diff++; else if (lastEncoderBits == ENCODER_PHASE_0) temp_diff--; - }break; + break; } lastEncoderBits = newbutton; } @@ -137,9 +144,12 @@ ENCODER_DiffState Encoder_ReceiveAnalyze(void) { } EncoderRate.lastEncoderTime = ms; } + #else + constexpr int32_t encoderMultiplier = 1; - #endif // ENCODER_RATE_MULTIPLIER + + #endif // EncoderRate.encoderMoveValue += (temp_diff * encoderMultiplier) / (ENCODER_PULSES_PER_STEP); EncoderRate.encoderMoveValue = (temp_diff * encoderMultiplier) / (ENCODER_PULSES_PER_STEP); @@ -153,23 +163,23 @@ ENCODER_DiffState Encoder_ReceiveAnalyze(void) { #if PIN_EXISTS(LCD_LED) // Take the low 24 valid bits 24Bit: G7 G6 G5 G4 G3 G2 G1 G0 R7 R6 R5 R4 R3 R2 R1 R0 B7 B6 B5 B4 B3 B2 B1 B0 - unsigned int LED_DataArray[LED_NUM]; + uint16_t LED_DataArray[LED_NUM]; // LED light operation - void LED_Action(void) { + void LED_Action() { LED_Control(RGB_SCALE_WARM_WHITE,0x0F); delay(30); LED_Control(RGB_SCALE_WARM_WHITE,0x00); } // LED initialization - void LED_Configuration(void) { + void LED_Configuration() { SET_OUTPUT(LCD_LED_PIN); } // LED write data - void LED_WriteData(void) { - unsigned char tempCounter_LED, tempCounter_Bit; + void LED_WriteData() { + uint8_t tempCounter_LED, tempCounter_Bit; for (tempCounter_LED = 0; tempCounter_LED < LED_NUM; tempCounter_LED++) { for (tempCounter_Bit = 0; tempCounter_Bit < 24; tempCounter_Bit++) { if (LED_DataArray[tempCounter_LED] & (0x800000 >> tempCounter_Bit)) { @@ -190,14 +200,13 @@ ENCODER_DiffState Encoder_ReceiveAnalyze(void) { // LED control // RGB_Scale: RGB color ratio // luminance: brightness (0~0xFF) - void LED_Control(unsigned char RGB_Scale, unsigned char luminance) { - unsigned char temp_Counter; - for (temp_Counter = 0; temp_Counter < LED_NUM; temp_Counter++) { - LED_DataArray[temp_Counter] = 0; + void LED_Control(const uint8_t RGB_Scale, const uint8_t luminance) { + for (uint8_t i = 0; i < LED_NUM; i++) { + LED_DataArray[i] = 0; switch (RGB_Scale) { - case RGB_SCALE_R10_G7_B5: LED_DataArray[temp_Counter] = (luminance*10/10) << 8 | (luminance*7/10) << 16 | luminance*5/10; break; - case RGB_SCALE_R10_G7_B4: LED_DataArray[temp_Counter] = (luminance*10/10) << 8 | (luminance*7/10) << 16 | luminance*4/10; break; - case RGB_SCALE_R10_G8_B7: LED_DataArray[temp_Counter] = (luminance*10/10) << 8 | (luminance*8/10) << 16 | luminance*7/10; break; + case RGB_SCALE_R10_G7_B5: LED_DataArray[i] = (luminance * 10/10) << 8 | (luminance * 7/10) << 16 | luminance * 5/10; break; + case RGB_SCALE_R10_G7_B4: LED_DataArray[i] = (luminance * 10/10) << 8 | (luminance * 7/10) << 16 | luminance * 4/10; break; + case RGB_SCALE_R10_G8_B7: LED_DataArray[i] = (luminance * 10/10) << 8 | (luminance * 8/10) << 16 | luminance * 7/10; break; } } LED_WriteData(); @@ -207,45 +216,38 @@ ENCODER_DiffState Encoder_ReceiveAnalyze(void) { // RGB_Scale: RGB color ratio // luminance: brightness (0~0xFF) // change_Time: gradient time (ms) - void LED_GraduallyControl(unsigned char RGB_Scale, unsigned char luminance, unsigned int change_Interval) { - unsigned char temp_Counter; - unsigned char LED_R_Data[LED_NUM], LED_G_Data[LED_NUM], LED_B_Data[LED_NUM]; - bool LED_R_Flag = 0, LED_G_Flag = 0, LED_B_Flag = 0; - - for (temp_Counter = 0; temp_Counter < LED_NUM; temp_Counter++) { + void LED_GraduallyControl(const uint8_t RGB_Scale, const uint8_t luminance, const uint16_t change_Interval) { + struct { uint8_t g, r, b; } led_data[LED_NUM]; + for (uint8_t i = 0; i < LED_NUM; i++) { switch (RGB_Scale) { - case RGB_SCALE_R10_G7_B5: { - LED_R_Data[temp_Counter] = luminance*10/10; - LED_G_Data[temp_Counter] = luminance*7/10; - LED_B_Data[temp_Counter] = luminance*5/10; - }break; - case RGB_SCALE_R10_G7_B4: { - LED_R_Data[temp_Counter] = luminance*10/10; - LED_G_Data[temp_Counter] = luminance*7/10; - LED_B_Data[temp_Counter] = luminance*4/10; - }break; - case RGB_SCALE_R10_G8_B7: { - LED_R_Data[temp_Counter] = luminance*10/10; - LED_G_Data[temp_Counter] = luminance*8/10; - LED_B_Data[temp_Counter] = luminance*7/10; - }break; + case RGB_SCALE_R10_G7_B5: + led_data[i] = { luminance * 7/10, luminance * 10/10, luminance * 5/10 }; + break; + case RGB_SCALE_R10_G7_B4: + led_data[i] = { luminance * 7/10, luminance * 10/10, luminance * 4/10 }; + break; + case RGB_SCALE_R10_G8_B7: + led_data[i] = { luminance * 8/10, luminance * 10/10, luminance * 7/10 }; + break; } } - for (temp_Counter = 0; temp_Counter < LED_NUM; temp_Counter++) { - if ((unsigned char)(LED_DataArray[temp_Counter] >> 8) > LED_R_Data[temp_Counter]) LED_DataArray[temp_Counter] -= 0x000100; - else if ((unsigned char)(LED_DataArray[temp_Counter] >> 8) < LED_R_Data[temp_Counter]) LED_DataArray[temp_Counter] += 0x000100; - while (1) { - else LED_R_Flag = 1; - if ((unsigned char)(LED_DataArray[temp_Counter]>>16) > LED_G_Data[temp_Counter]) LED_DataArray[temp_Counter] -= 0x010000; - else if ((unsigned char)(LED_DataArray[temp_Counter]>>16) < LED_G_Data[temp_Counter]) LED_DataArray[temp_Counter] += 0x010000; - else LED_G_Flag = 1; - if ((unsigned char)LED_DataArray[temp_Counter] > LED_B_Data[temp_Counter]) LED_DataArray[temp_Counter] -= 0x000001; - else if ((unsigned char)LED_DataArray[temp_Counter] < LED_B_Data[temp_Counter]) LED_DataArray[temp_Counter] += 0x000001; - else LED_B_Flag = 1; + + struct { bool g, r, b; } led_flag = { false, false, false }; + for (uint8_t i = 0; i < LED_NUM; i++) { + while (1) { + const uint8_t g = uint8_t(LED_DataArray[i] >> 16), + r = uint8_t(LED_DataArray[i] >> 8), + b = uint8_t(LED_DataArray[i]); + if (g == led_data[i].g) led_flag.g = true; + else LED_DataArray[i] += (g > led_data[i].g) ? -0x010000 : 0x010000; + if (r == led_data[i].r) led_flag.r = true; + else LED_DataArray[i] += (r > led_data[i].r) ? -0x000100 : 0x000100; + if (b == led_data[i].b) led_flag.b = true; + else LED_DataArray[i] += (b > led_data[i].b) ? -0x000001 : 0x000001; + LED_WriteData(); + if (led_flag.r && led_flag.g && led_flag.b) break; + delay(change_Interval); } - LED_WriteData(); - if (LED_R_Flag && LED_G_Flag && LED_B_Flag) break; - else delay(change_Interval); } } diff --git a/Marlin/src/lcd/dwin/e3v2/rotary_encoder.h b/Marlin/src/lcd/dwin/e3v2/rotary_encoder.h index 93e54839d6..bbba753a0b 100644 --- a/Marlin/src/lcd/dwin/e3v2/rotary_encoder.h +++ b/Marlin/src/lcd/dwin/e3v2/rotary_encoder.h @@ -34,15 +34,6 @@ /*********************** Encoder Set ***********************/ -#define ENCODER_PHASE_0 0 -#define ENCODER_PHASE_1 2 -#define ENCODER_PHASE_2 3 -#define ENCODER_PHASE_3 1 - -#define ENCODER_PULSES_PER_STEP 4 - -#define BUTTON_PRESSED(BN) !READ(BTN_## BN) - typedef struct { bool enabled = false; int encoderMoveValue = 0; @@ -59,10 +50,10 @@ typedef enum { } ENCODER_DiffState; // Encoder initialization -void Encoder_Configuration(void); +void Encoder_Configuration(); // Analyze encoder value and return state -ENCODER_DiffState Encoder_ReceiveAnalyze(void); +ENCODER_DiffState Encoder_ReceiveAnalyze(); /*********************** Encoder LED ***********************/ @@ -82,23 +73,23 @@ ENCODER_DiffState Encoder_ReceiveAnalyze(void); extern unsigned int LED_DataArray[LED_NUM]; // LED light operation - void LED_Action(void); + void LED_Action(); // LED initialization - void LED_Configuration(void); + void LED_Configuration(); // LED write data - void LED_WriteData(void); + void LED_WriteData(); // LED control // RGB_Scale: RGB color ratio // luminance: brightness (0~0xFF) - void LED_Control(unsigned char RGB_Scale, unsigned char luminance); + void LED_Control(const uint8_t RGB_Scale, const uint8_t luminance); // LED gradient control // RGB_Scale: RGB color ratio // luminance: brightness (0~0xFF) // change_Time: gradient time (ms) - void LED_GraduallyControl(unsigned char RGB_Scale, unsigned char luminance, unsigned int change_Interval); + void LED_GraduallyControl(const uint8_t RGB_Scale, const uint8_t luminance, const uint16_t change_Interval); #endif // LCD_LED diff --git a/Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.cpp b/Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.cpp index f13a4b36cf..097c1aeadc 100644 --- a/Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.cpp +++ b/Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.cpp @@ -468,19 +468,10 @@ void lv_encoder_pin_init() { #if ANY_BUTTON(EN1, EN2, ENC, BACK) uint8_t newbutton = 0; - - #if BUTTON_EXISTS(EN1) - if (BUTTON_PRESSED(EN1)) newbutton |= EN_A; - #endif - #if BUTTON_EXISTS(EN2) - if (BUTTON_PRESSED(EN2)) newbutton |= EN_B; - #endif - #if BUTTON_EXISTS(ENC) - if (BUTTON_PRESSED(ENC)) newbutton |= EN_C; - #endif - #if BUTTON_EXISTS(BACK) - if (BUTTON_PRESSED(BACK)) newbutton |= EN_D; - #endif + if (BUTTON_PRESSED(EN1)) newbutton |= EN_A; + if (BUTTON_PRESSED(EN2)) newbutton |= EN_B; + if (BUTTON_PRESSED(ENC)) newbutton |= EN_C; + if (BUTTON_PRESSED(BACK)) newbutton |= EN_D; #else @@ -488,7 +479,6 @@ void lv_encoder_pin_init() { #endif - static uint8_t buttons = 0; buttons = newbutton; static uint8_t lastEncoderBits; diff --git a/Marlin/src/lcd/lcdprint.h b/Marlin/src/lcd/lcdprint.h index cf34a7ade9..b7732d3198 100644 --- a/Marlin/src/lcd/lcdprint.h +++ b/Marlin/src/lcd/lcdprint.h @@ -76,8 +76,8 @@ #define INFO_FONT_HEIGHT (INFO_FONT_ASCENT + INFO_FONT_DESCENT) #define INFO_FONT_WIDTH 6 - #define SETCURSOR(col, row) lcd_moveto((col) * (MENU_FONT_WIDTH), ((row) + 1) * (MENU_FONT_HEIGHT)) - #define SETCURSOR_RJ(len, row) lcd_moveto(LCD_PIXEL_WIDTH - (len) * (MENU_FONT_WIDTH), ((row) + 1) * (MENU_FONT_HEIGHT)) + #define LCD_COL_X(col) (( (col)) * (MENU_FONT_WIDTH)) + #define LCD_ROW_Y(row) ((1 + (row)) * (MENU_FONT_HEIGHT)) #else @@ -94,14 +94,18 @@ #define LCD_PIXEL_WIDTH LCD_WIDTH #define LCD_PIXEL_HEIGHT LCD_HEIGHT - #define SETCURSOR(col, row) lcd_moveto(col, row) - #define SETCURSOR_RJ(len, row) SETCURSOR(LCD_WIDTH - (len), row) + #define LCD_COL_X(col) (col) + #define LCD_ROW_Y(row) (row) #endif -#define SETCURSOR_X(col) SETCURSOR(col, _lcdLineNr) -#define SETCURSOR_X_RJ(len) SETCURSOR_RJ(len, _lcdLineNr) -#define START_OF_UTF8_CHAR(C) (((C) & 0xC0u) != 0x80U) +#define LCD_COL_X_RJ(len) (LCD_PIXEL_WIDTH - LCD_COL_X(len)) +#define LCD_BOTTOM_ROW (LCD_PIXEL_HEIGHT - 1) +#define SETCURSOR(col, row) lcd_moveto(LCD_COL_X(col), LCD_ROW_Y(row)) +#define SETCURSOR_RJ(len, row) lcd_moveto(LCD_COL_X_RJ(len), LCD_ROW_Y(row)) +#define SETCURSOR_X(col) SETCURSOR(col, _lcdLineNr) +#define SETCURSOR_X_RJ(len) SETCURSOR_RJ(len, _lcdLineNr) +#define START_OF_UTF8_CHAR(C) (((C) & 0xC0u) != 0x80U) int lcd_glyph_height(); diff --git a/Marlin/src/lcd/marlinui.cpp b/Marlin/src/lcd/marlinui.cpp index e59b72f47d..430bfcf48e 100644 --- a/Marlin/src/lcd/marlinui.cpp +++ b/Marlin/src/lcd/marlinui.cpp @@ -342,7 +342,6 @@ void MarlinUI::init() { init_lcd(); #if HAS_DIGITAL_BUTTONS - #if BUTTON_EXISTS(EN1) SET_INPUT_PULLUP(BTN_EN1); #endif @@ -352,15 +351,12 @@ void MarlinUI::init() { #if BUTTON_EXISTS(ENC) SET_INPUT_PULLUP(BTN_ENC); #endif - #if BUTTON_EXISTS(ENC_EN) SET_INPUT_PULLUP(BTN_ENC_EN); #endif - #if BUTTON_EXISTS(BACK) SET_INPUT_PULLUP(BTN_BACK); #endif - #if BUTTON_EXISTS(UP) SET_INPUT(BTN_UP); #endif @@ -373,8 +369,7 @@ void MarlinUI::init() { #if BUTTON_EXISTS(RT) SET_INPUT(BTN_RT); #endif - - #endif // !HAS_DIGITAL_BUTTONS + #endif #if HAS_SHIFT_ENCODER @@ -383,14 +378,14 @@ void MarlinUI::init() { SET_OUTPUT(SR_DATA_PIN); SET_OUTPUT(SR_CLK_PIN); - #elif defined(SHIFT_CLK) + #elif PIN_EXISTS(SHIFT_CLK) - SET_OUTPUT(SHIFT_CLK); - OUT_WRITE(SHIFT_LD, HIGH); - #if defined(SHIFT_EN) && SHIFT_EN >= 0 - OUT_WRITE(SHIFT_EN, LOW); + SET_OUTPUT(SHIFT_CLK_PIN); + OUT_WRITE(SHIFT_LD_PIN, HIGH); + #if PIN_EXISTS(SHIFT_EN) + OUT_WRITE(SHIFT_EN_PIN, LOW); #endif - SET_INPUT_PULLUP(SHIFT_OUT); + SET_INPUT_PULLUP(SHIFT_OUT_PIN); #endif @@ -830,11 +825,7 @@ millis_t next_lcd_update_ms; #endif inline bool can_encode() { - #if BUTTON_EXISTS(ENC_EN) - return !BUTTON_PRESSED(ENC_EN); // Update position only when ENC_EN is HIGH - #else - return true; - #endif + return !BUTTON_PRESSED(ENC_EN); // Update encoder only when ENC_EN is not LOW (pressed) } void MarlinUI::update() { @@ -890,18 +881,17 @@ void MarlinUI::update() { else if (!wait_for_unclick && (buttons & EN_C)) // OK button, if not waiting for a debounce release: do_click(); } - else // keep wait_for_unclick value - - #endif // HAS_TOUCH_BUTTONS + // keep wait_for_unclick value + #endif - { - // Integrated LCD click handling via button_pressed - if (!external_control && button_pressed()) { - if (!wait_for_unclick) do_click(); // Handle the click - } - else - wait_for_unclick = false; + if (!touch_buttons) { + // Integrated LCD click handling via button_pressed + if (!external_control && button_pressed()) { + if (!wait_for_unclick) do_click(); // Handle the click } + else + wait_for_unclick = false; + } if (LCD_BACK_CLICKED()) { quick_feedback(); @@ -1198,19 +1188,10 @@ void MarlinUI::update() { #if ANY_BUTTON(EN1, EN2, ENC, BACK) uint8_t newbutton = 0; - - #if BUTTON_EXISTS(EN1) - if (BUTTON_PRESSED(EN1)) newbutton |= EN_A; - #endif - #if BUTTON_EXISTS(EN2) - if (BUTTON_PRESSED(EN2)) newbutton |= EN_B; - #endif - #if BUTTON_EXISTS(ENC) - if (can_encode() && BUTTON_PRESSED(ENC)) newbutton |= EN_C; - #endif - #if BUTTON_EXISTS(BACK) - if (BUTTON_PRESSED(BACK)) newbutton |= EN_D; - #endif + if (BUTTON_PRESSED(EN1)) newbutton |= EN_A; + if (BUTTON_PRESSED(EN2)) newbutton |= EN_B; + if (can_encode() && BUTTON_PRESSED(ENC)) newbutton |= EN_C; + if (BUTTON_PRESSED(BACK)) newbutton |= EN_D; #else @@ -1225,40 +1206,26 @@ void MarlinUI::update() { const int8_t pulses = epps * encoderDirection; - if (false) { - // for the else-ifs below + if (BUTTON_PRESSED(UP)) { + encoderDiff = (ENCODER_STEPS_PER_MENU_ITEM) * pulses; + next_button_update_ms = now + 300; + } + else if (BUTTON_PRESSED(DWN)) { + encoderDiff = -(ENCODER_STEPS_PER_MENU_ITEM) * pulses; + next_button_update_ms = now + 300; + } + else if (BUTTON_PRESSED(LFT)) { + encoderDiff = -pulses; + next_button_update_ms = now + 300; + } + else if (BUTTON_PRESSED(RT)) { + encoderDiff = pulses; + next_button_update_ms = now + 300; } - #if BUTTON_EXISTS(UP) - else if (BUTTON_PRESSED(UP)) { - encoderDiff = (ENCODER_STEPS_PER_MENU_ITEM) * pulses; - next_button_update_ms = now + 300; - } - #endif - #if BUTTON_EXISTS(DWN) - else if (BUTTON_PRESSED(DWN)) { - encoderDiff = -(ENCODER_STEPS_PER_MENU_ITEM) * pulses; - next_button_update_ms = now + 300; - } - #endif - #if BUTTON_EXISTS(LFT) - else if (BUTTON_PRESSED(LFT)) { - encoderDiff = -pulses; - next_button_update_ms = now + 300; - } - #endif - #if BUTTON_EXISTS(RT) - else if (BUTTON_PRESSED(RT)) { - encoderDiff = pulses; - next_button_update_ms = now + 300; - } - #endif #endif // UP || DWN || LFT || RT - buttons = (newbutton - #if HAS_SLOW_BUTTONS - | slow_buttons - #endif + buttons = (newbutton | TERN0(HAS_SLOW_BUTTONS, slow_buttons) #if BOTH(HAS_TOUCH_BUTTONS, HAS_ENCODER_ACTION) | (touch_buttons & TERN(HAS_ENCODER_WHEEL, ~(EN_A | EN_B), 0xFF)) #endif @@ -1284,13 +1251,13 @@ void MarlinUI::update() { * The rotary encoder part is also independent of the LCD chipset. */ uint8_t val = 0; - WRITE(SHIFT_LD, LOW); - WRITE(SHIFT_LD, HIGH); + WRITE(SHIFT_LD_PIN, LOW); + WRITE(SHIFT_LD_PIN, HIGH); LOOP_L_N(i, 8) { val >>= 1; - if (READ(SHIFT_OUT)) SBI(val, 7); - WRITE(SHIFT_CLK, HIGH); - WRITE(SHIFT_CLK, LOW); + if (READ(SHIFT_OUT_PIN)) SBI(val, 7); + WRITE(SHIFT_CLK_PIN, HIGH); + WRITE(SHIFT_CLK_PIN, LOW); } TERN(REPRAPWORLD_KEYPAD, keypad_buttons, buttons) = ~val; #endif @@ -1306,11 +1273,6 @@ void MarlinUI::update() { #if HAS_ENCODER_WHEEL static uint8_t lastEncoderBits; - #define encrot0 0 - #define encrot1 2 - #define encrot2 3 - #define encrot3 1 - // Manage encoder rotation #define ENCODER_SPIN(_E1, _E2) switch (lastEncoderBits) { case _E1: encoderDiff += encoderDirection; break; case _E2: encoderDiff -= encoderDirection; } @@ -1319,10 +1281,10 @@ void MarlinUI::update() { if (buttons & EN_B) enc |= B10; if (enc != lastEncoderBits) { switch (enc) { - case encrot0: ENCODER_SPIN(encrot3, encrot1); break; - case encrot1: ENCODER_SPIN(encrot0, encrot2); break; - case encrot2: ENCODER_SPIN(encrot1, encrot3); break; - case encrot3: ENCODER_SPIN(encrot2, encrot0); break; + case ENCODER_PHASE_0: ENCODER_SPIN(ENCODER_PHASE_3, ENCODER_PHASE_1); break; + case ENCODER_PHASE_1: ENCODER_SPIN(ENCODER_PHASE_0, ENCODER_PHASE_2); break; + case ENCODER_PHASE_2: ENCODER_SPIN(ENCODER_PHASE_1, ENCODER_PHASE_3); break; + case ENCODER_PHASE_3: ENCODER_SPIN(ENCODER_PHASE_2, ENCODER_PHASE_0); break; } #if BOTH(HAS_LCD_MENU, AUTO_BED_LEVELING_UBL) external_encoder(); diff --git a/Marlin/src/lcd/marlinui.h b/Marlin/src/lcd/marlinui.h index a926dd58f4..a64483fcb0 100644 --- a/Marlin/src/lcd/marlinui.h +++ b/Marlin/src/lcd/marlinui.h @@ -25,6 +25,8 @@ #include "../module/motion.h" +#include "buttons.h" + #if HAS_BUZZER #include "../libs/buzzer.h" #endif @@ -40,20 +42,6 @@ #if EITHER(HAS_LCD_MENU, ULTIPANEL_FEEDMULTIPLY) #define HAS_ENCODER_ACTION 1 #endif -#if ((!HAS_ADC_BUTTONS && IS_NEWPANEL) || BUTTONS_EXIST(EN1, EN2)) && !IS_TFTGLCD_PANEL - #define HAS_ENCODER_WHEEL 1 -#endif -#if HAS_ENCODER_WHEEL || ANY_BUTTON(ENC, BACK, UP, DWN, LFT, RT) - #define HAS_DIGITAL_BUTTONS 1 -#endif -#if !HAS_ADC_BUTTONS && (IS_RRW_KEYPAD || (HAS_WIRED_LCD && !IS_NEWPANEL)) - #define HAS_SHIFT_ENCODER 1 -#endif - -// I2C buttons must be read in the main thread -#if ANY(LCD_I2C_VIKI, LCD_I2C_PANELOLU2, IS_TFTGLCD_PANEL) - #define HAS_SLOW_BUTTONS 1 -#endif #if E_MANUAL > 1 #define MULTI_MANUAL 1 @@ -114,130 +102,6 @@ #endif // HAS_WIRED_LCD -#if IS_RRW_KEYPAD - #define BTN_OFFSET 0 // Bit offset into buttons for shift register values - - #define BLEN_KEYPAD_F3 0 - #define BLEN_KEYPAD_F2 1 - #define BLEN_KEYPAD_F1 2 - #define BLEN_KEYPAD_DOWN 3 - #define BLEN_KEYPAD_RIGHT 4 - #define BLEN_KEYPAD_MIDDLE 5 - #define BLEN_KEYPAD_UP 6 - #define BLEN_KEYPAD_LEFT 7 - - #define EN_KEYPAD_F1 _BV(BTN_OFFSET + BLEN_KEYPAD_F1) - #define EN_KEYPAD_F2 _BV(BTN_OFFSET + BLEN_KEYPAD_F2) - #define EN_KEYPAD_F3 _BV(BTN_OFFSET + BLEN_KEYPAD_F3) - #define EN_KEYPAD_DOWN _BV(BTN_OFFSET + BLEN_KEYPAD_DOWN) - #define EN_KEYPAD_RIGHT _BV(BTN_OFFSET + BLEN_KEYPAD_RIGHT) - #define EN_KEYPAD_MIDDLE _BV(BTN_OFFSET + BLEN_KEYPAD_MIDDLE) - #define EN_KEYPAD_UP _BV(BTN_OFFSET + BLEN_KEYPAD_UP) - #define EN_KEYPAD_LEFT _BV(BTN_OFFSET + BLEN_KEYPAD_LEFT) - - #define RRK(B) (keypad_buttons & (B)) - - #ifdef EN_C - #define BUTTON_CLICK() ((buttons & EN_C) || RRK(EN_KEYPAD_MIDDLE)) - #else - #define BUTTON_CLICK() RRK(EN_KEYPAD_MIDDLE) - #endif - -#endif // IS_RRW_KEYPAD - -#if HAS_DIGITAL_BUTTONS - - // Wheel spin pins where BA is 00, 10, 11, 01 (1 bit always changes) - #define BLEN_A 0 - #define BLEN_B 1 - - #define EN_A _BV(BLEN_A) - #define EN_B _BV(BLEN_B) - - #define BUTTON_PRESSED(BN) !READ(BTN_## BN) - - #if BUTTON_EXISTS(ENC) || HAS_TOUCH_BUTTONS - #define BLEN_C 2 - #define EN_C _BV(BLEN_C) - #endif - - #if ENABLED(LCD_I2C_VIKI) - - #include - - #define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C) - - // button and encoder bit positions within 'buttons' - #define B_LE (BUTTON_LEFT << B_I2C_BTN_OFFSET) // The remaining normalized buttons are all read via I2C - #define B_UP (BUTTON_UP << B_I2C_BTN_OFFSET) - #define B_MI (BUTTON_SELECT << B_I2C_BTN_OFFSET) - #define B_DW (BUTTON_DOWN << B_I2C_BTN_OFFSET) - #define B_RI (BUTTON_RIGHT << B_I2C_BTN_OFFSET) - - #if BUTTON_EXISTS(ENC) // The pause/stop/restart button is connected to BTN_ENC when used - #define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name - #define BUTTON_CLICK() (buttons & (B_MI|B_RI|B_ST)) // Pause/stop also acts as click until a proper pause/stop is implemented. - #else - #define BUTTON_CLICK() (buttons & (B_MI|B_RI)) - #endif - - // I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update - - #elif ENABLED(LCD_I2C_PANELOLU2) - - #if !BUTTON_EXISTS(ENC) // Use I2C if not directly connected to a pin - - #define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C) - - #define B_MI (PANELOLU2_ENCODER_C << B_I2C_BTN_OFFSET) // requires LiquidTWI2 library v1.2.3 or later - - #define BUTTON_CLICK() (buttons & B_MI) - - #endif - - #endif - -#else - - #undef BUTTON_EXISTS - #define BUTTON_EXISTS(...) false - - // Shift register bits correspond to buttons: - #define BL_LE 7 // Left - #define BL_UP 6 // Up - #define BL_MI 5 // Middle - #define BL_DW 4 // Down - #define BL_RI 3 // Right - #define BL_ST 2 // Red Button - #define B_LE _BV(BL_LE) - #define B_UP _BV(BL_UP) - #define B_MI _BV(BL_MI) - #define B_DW _BV(BL_DW) - #define B_RI _BV(BL_RI) - #define B_ST _BV(BL_ST) - - #ifndef BUTTON_CLICK - #define BUTTON_CLICK() (buttons & (B_MI|B_ST)) - #endif - -#endif - -#if BUTTON_EXISTS(BACK) || EITHER(HAS_TOUCH_BUTTONS, IS_TFTGLCD_PANEL) - #define BLEN_D 3 - #define EN_D _BV(BLEN_D) - #define LCD_BACK_CLICKED() (buttons & EN_D) -#else - #define LCD_BACK_CLICKED() false -#endif - -#ifndef BUTTON_CLICK - #ifdef EN_C - #define BUTTON_CLICK() (buttons & EN_C) - #else - #define BUTTON_CLICK() false - #endif -#endif - #if HAS_MARLINUI_U8GLIB enum MarlinFont : uint8_t { FONT_STATUSMENU = 1, @@ -556,6 +420,8 @@ public: #if HAS_TOUCH_BUTTONS static uint8_t touch_buttons; static uint8_t repeat_delay; + #else + static constexpr uint8_t touch_buttons = 0; #endif #if ENABLED(ENCODER_RATE_MULTIPLIER) diff --git a/Marlin/src/lcd/touch/touch_buttons.cpp b/Marlin/src/lcd/touch/touch_buttons.cpp index 3d1cc26cd6..975de58211 100644 --- a/Marlin/src/lcd/touch/touch_buttons.cpp +++ b/Marlin/src/lcd/touch/touch_buttons.cpp @@ -31,7 +31,8 @@ XPT2046 touchIO; #include "../tft_io/touch_calibration.h" #endif -#include "../marlinui.h" // For EN_C bit mask +#include "../buttons.h" // For EN_C bit mask +#include "../marlinui.h" // For ui.refresh #include "../tft_io/tft_io.h" #define DOGM_AREA_LEFT TFT_PIXEL_OFFSET_X @@ -66,7 +67,6 @@ uint8_t TouchButtons::read_buttons() { y = uint16_t((uint32_t(y) * TOUCH_CALIBRATION_Y) >> 16) + TOUCH_OFFSET_Y; #endif - // Touch within the button area simulates an encoder button if (y > BUTTON_AREA_TOP && y < BUTTON_AREA_BOT) return WITHIN(x, BUTTOND_X_LO, BUTTOND_X_HI) ? EN_D diff --git a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h index ce2ee2579a..ab1446f07c 100644 --- a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h +++ b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h @@ -459,10 +459,10 @@ #if !IS_NEWPANEL // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 + //#define SHIFT_CLK_PIN 38 + //#define SHIFT_LD_PIN 42 + //#define SHIFT_OUT_PIN 40 + //#define SHIFT_EN_PIN 17 #endif #endif @@ -608,9 +608,9 @@ // Buttons are directly attached to AUX-2 #if IS_RRW_KEYPAD - #define SHIFT_OUT 40 - #define SHIFT_CLK 44 - #define SHIFT_LD 42 + #define SHIFT_OUT_PIN 40 + #define SHIFT_CLK_PIN 44 + #define SHIFT_LD_PIN 42 #define BTN_EN1 64 #define BTN_EN2 59 #define BTN_ENC 63 diff --git a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h index e045245188..7d0f494c34 100644 --- a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h +++ b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h @@ -354,15 +354,15 @@ #if IS_NEWPANEL #if IS_RRW_KEYPAD - #define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3 - #define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3 - #define SHIFT_LD P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant) + #define SHIFT_OUT_PIN P0_18 // (51) (MOSI) J3-10 & AUX-3 + #define SHIFT_CLK_PIN P0_15 // (52) (SCK) J3-9 & AUX-3 + #define SHIFT_LD_PIN P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant) #endif #else - //#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4 - //#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4 - //#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4 - //#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4 + //#define SHIFT_CLK_PIN P3_26 // (31) J3-2 & AUX-4 + //#define SHIFT_LD_PIN P3_25 // (33) J3-4 & AUX-4 + //#define SHIFT_OUT_PIN P2_11 // (35) J3-3 & AUX-4 + //#define SHIFT_EN_PIN P1_22 // (41) J5-4 & AUX-4 #endif #if ANY(VIKI2, miniVIKI) diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h index 596efdbb97..fdd64878fb 100644 --- a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h +++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h @@ -147,14 +147,14 @@ #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 #if IS_RRW_KEYPAD - #define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3 - #define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3 - #define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3 + #define SHIFT_OUT_PIN P0_18 // (51) (MOSI) J3-10 & AUX-3 + #define SHIFT_CLK_PIN P0_15 // (52) (SCK) J3-9 & AUX-3 + #define SHIFT_LD_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3 #elif !IS_NEWPANEL - //#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4 - //#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4 - //#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4 - //#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4 + //#define SHIFT_OUT_PIN P2_11 // (35) J3-3 & AUX-4 + //#define SHIFT_CLK_PIN P3_26 // (31) J3-2 & AUX-4 + //#define SHIFT_LD_PIN P3_25 // (33) J3-4 & AUX-4 + //#define SHIFT_EN_PIN P1_22 // (41) J5-4 & AUX-4 #endif #if ANY(VIKI2, miniVIKI) diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_11.h b/Marlin/src/pins/mega/pins_CNCONTROLS_11.h index 0e75aa4a37..f80e6144ce 100644 --- a/Marlin/src/pins/mega/pins_CNCONTROLS_11.h +++ b/Marlin/src/pins/mega/pins_CNCONTROLS_11.h @@ -149,9 +149,9 @@ #define BTN_ENC 27 // Hardware buttons for manual movement of XYZ -#define SHIFT_OUT 19 -#define SHIFT_LD 18 -#define SHIFT_CLK 17 +#define SHIFT_OUT_PIN 19 +#define SHIFT_LD_PIN 18 +#define SHIFT_CLK_PIN 17 //#define UI1 31 //#define UI2 22 diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_12.h b/Marlin/src/pins/mega/pins_CNCONTROLS_12.h index 35426a4531..540f5c29f5 100644 --- a/Marlin/src/pins/mega/pins_CNCONTROLS_12.h +++ b/Marlin/src/pins/mega/pins_CNCONTROLS_12.h @@ -156,9 +156,9 @@ #define BTN_ENC 38 // Hardware buttons for manual movement of XYZ -#define SHIFT_OUT 42 -#define SHIFT_LD 41 -#define SHIFT_CLK 40 +#define SHIFT_OUT_PIN 42 +#define SHIFT_LD_PIN 41 +#define SHIFT_CLK_PIN 40 //#define UI1 43 //#define UI2 37 diff --git a/Marlin/src/pins/mega/pins_GT2560_REV_A.h b/Marlin/src/pins/mega/pins_GT2560_REV_A.h index e1752c1f85..dcd829f7a7 100644 --- a/Marlin/src/pins/mega/pins_GT2560_REV_A.h +++ b/Marlin/src/pins/mega/pins_GT2560_REV_A.h @@ -146,10 +146,10 @@ #else // !IS_NEWPANEL - #define SHIFT_CLK 38 - #define SHIFT_LD 42 - #define SHIFT_OUT 40 - #define SHIFT_EN 17 + #define SHIFT_CLK_PIN 38 + #define SHIFT_LD_PIN 42 + #define SHIFT_OUT_PIN 40 + #define SHIFT_EN_PIN 17 #define LCD_PINS_RS 16 #define LCD_PINS_ENABLE 5 diff --git a/Marlin/src/pins/mega/pins_HJC2560C_REV2.h b/Marlin/src/pins/mega/pins_HJC2560C_REV2.h index fa2027fb78..d507d20ca7 100644 --- a/Marlin/src/pins/mega/pins_HJC2560C_REV2.h +++ b/Marlin/src/pins/mega/pins_HJC2560C_REV2.h @@ -156,10 +156,10 @@ #else // Buttons attached to a shift register - #define SHIFT_CLK 38 - #define SHIFT_LD 42 - #define SHIFT_OUT 40 - #define SHIFT_EN 17 + #define SHIFT_CLK_PIN 38 + #define SHIFT_LD_PIN 42 + #define SHIFT_OUT_PIN 40 + #define SHIFT_EN_PIN 17 #define LCD_PINS_RS 16 #define LCD_PINS_ENABLE 5 diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h index 67ec24ed6f..ef4605edd4 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h @@ -146,10 +146,10 @@ #define BTN_ENC 43 #else // Buttons attached to shift register of reprapworld keypad v1.1 - #define SHIFT_CLK 63 - #define SHIFT_LD 42 - #define SHIFT_OUT 17 - #define SHIFT_EN 17 + #define SHIFT_CLK_PIN 63 + #define SHIFT_LD_PIN 42 + #define SHIFT_OUT_PIN 17 + #define SHIFT_EN_PIN 17 #endif #endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS_3.h b/Marlin/src/pins/mega/pins_MEGATRONICS_3.h index 45ebd163a7..9f85d46a54 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS_3.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS_3.h @@ -162,10 +162,10 @@ #define LCD_PINS_D6 39 #define LCD_PINS_D7 15 - #define SHIFT_CLK 43 - #define SHIFT_LD 35 - #define SHIFT_OUT 34 - #define SHIFT_EN 44 + #define SHIFT_CLK_PIN 43 + #define SHIFT_LD_PIN 35 + #define SHIFT_OUT_PIN 34 + #define SHIFT_EN_PIN 44 #if MB(MEGATRONICS_31, MEGATRONICS_32) #define SD_DETECT_PIN 56 diff --git a/Marlin/src/pins/pinsDebug_list.h b/Marlin/src/pins/pinsDebug_list.h index 0e1b1b09e5..79a67c34f8 100644 --- a/Marlin/src/pins/pinsDebug_list.h +++ b/Marlin/src/pins/pinsDebug_list.h @@ -833,17 +833,17 @@ #if PIN_EXISTS(SERVO3) REPORT_NAME_DIGITAL(__LINE__, SERVO3_PIN) #endif -#if defined(SHIFT_CLK) && SHIFT_CLK >= 0 - REPORT_NAME_DIGITAL(__LINE__, SHIFT_CLK) +#if PIN_EXISTS(SHIFT_CLK) + REPORT_NAME_DIGITAL(__LINE__, SHIFT_CLK_PIN) #endif -#if defined(SHIFT_EN) && SHIFT_EN >= 0 - REPORT_NAME_DIGITAL(__LINE__, SHIFT_EN) +#if PIN_EXISTS(SHIFT_EN) + REPORT_NAME_DIGITAL(__LINE__, SHIFT_EN_PIN) #endif -#if defined(SHIFT_LD) && SHIFT_LD >= 0 - REPORT_NAME_DIGITAL(__LINE__, SHIFT_LD) +#if PIN_EXISTS(SHIFT_LD) + REPORT_NAME_DIGITAL(__LINE__, SHIFT_LD_PIN) #endif -#if defined(SHIFT_OUT) && SHIFT_OUT >= 0 - REPORT_NAME_DIGITAL(__LINE__, SHIFT_OUT) +#if PIN_EXISTS(SHIFT_OUT) + REPORT_NAME_DIGITAL(__LINE__, SHIFT_OUT_PIN) #endif #if PIN_EXISTS(SLED) REPORT_NAME_DIGITAL(__LINE__, SLED_PIN) diff --git a/Marlin/src/pins/rambo/pins_RAMBO.h b/Marlin/src/pins/rambo/pins_RAMBO.h index 7dcaeb8e57..be2317b146 100644 --- a/Marlin/src/pins/rambo/pins_RAMBO.h +++ b/Marlin/src/pins/rambo/pins_RAMBO.h @@ -239,10 +239,10 @@ // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 + //#define SHIFT_CLK_PIN 38 + //#define SHIFT_LD_PIN 42 + //#define SHIFT_OUT_PIN 40 + //#define SHIFT_EN_PIN 17 #define LCD_PINS_RS 75 #define LCD_PINS_ENABLE 17 diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h index 57d4c047e2..ab5711bd5c 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS.h @@ -504,10 +504,10 @@ #if !IS_NEWPANEL // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 + //#define SHIFT_CLK_PIN 38 + //#define SHIFT_LD_PIN 42 + //#define SHIFT_OUT_PIN 40 + //#define SHIFT_EN_PIN 17 #endif #endif @@ -722,9 +722,9 @@ #endif // HAS_WIRED_LCD #if IS_RRW_KEYPAD && !HAS_ADC_BUTTONS - #define SHIFT_OUT 40 - #define SHIFT_CLK 44 - #define SHIFT_LD 42 + #define SHIFT_OUT_PIN 40 + #define SHIFT_CLK_PIN 44 + #define SHIFT_LD_PIN 42 #ifndef BTN_EN1 #define BTN_EN1 64 #endif diff --git a/Marlin/src/pins/ramps/pins_TT_OSCAR.h b/Marlin/src/pins/ramps/pins_TT_OSCAR.h index e6a95fdab9..ca402553e1 100644 --- a/Marlin/src/pins/ramps/pins_TT_OSCAR.h +++ b/Marlin/src/pins/ramps/pins_TT_OSCAR.h @@ -342,10 +342,10 @@ #if !IS_NEWPANEL // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 + //#define SHIFT_CLK_PIN 38 + //#define SHIFT_LD_PIN 42 + //#define SHIFT_OUT_PIN 40 + //#define SHIFT_EN_PIN 17 #endif #endif @@ -491,9 +491,9 @@ // Buttons are directly attached to AUX-2 #if IS_RRW_KEYPAD - #define SHIFT_OUT 40 - #define SHIFT_CLK 44 - #define SHIFT_LD 42 + #define SHIFT_OUT_PIN 40 + #define SHIFT_CLK_PIN 44 + #define SHIFT_LD_PIN 42 #define BTN_EN1 64 #define BTN_EN2 59 #define BTN_ENC 63 diff --git a/Marlin/src/pins/ramps/pins_ULTIMAKER.h b/Marlin/src/pins/ramps/pins_ULTIMAKER.h index 447138f53e..22c7fd95b4 100644 --- a/Marlin/src/pins/ramps/pins_ULTIMAKER.h +++ b/Marlin/src/pins/ramps/pins_ULTIMAKER.h @@ -142,10 +142,10 @@ #else // !IS_NEWPANEL - Old style panel with shift register // Buttons attached to a shift register - #define SHIFT_CLK 38 - #define SHIFT_LD 42 - #define SHIFT_OUT 40 - #define SHIFT_EN 17 + #define SHIFT_CLK_PIN 38 + #define SHIFT_LD_PIN 42 + #define SHIFT_OUT_PIN 40 + #define SHIFT_EN_PIN 17 #define LCD_PINS_RS 16 #define LCD_PINS_ENABLE 5 diff --git a/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h b/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h index a59a000dff..37c28ece4c 100644 --- a/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h +++ b/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h @@ -197,10 +197,10 @@ #else // !IS_NEWPANEL - Old style panel with shift register // Buttons attached to a shift register - #define SHIFT_CLK 38 - #define SHIFT_LD 42 - #define SHIFT_OUT 40 - #define SHIFT_EN 17 + #define SHIFT_CLK_PIN 38 + #define SHIFT_LD_PIN 42 + #define SHIFT_OUT_PIN 40 + #define SHIFT_EN_PIN 17 #define LCD_PINS_RS 16 #define LCD_PINS_ENABLE 5 diff --git a/Marlin/src/pins/ramps/pins_ZRIB_V20.h b/Marlin/src/pins/ramps/pins_ZRIB_V20.h index 90433c62d7..6c4b28d0b8 100644 --- a/Marlin/src/pins/ramps/pins_ZRIB_V20.h +++ b/Marlin/src/pins/ramps/pins_ZRIB_V20.h @@ -69,9 +69,9 @@ #undef ADC_KEYPAD_PIN #undef BEEPER_PIN - #undef SHIFT_OUT - #undef SHIFT_CLK - #undef SHIFT_LD + #undef SHIFT_OUT_PIN + #undef SHIFT_CLK_PIN + #undef SHIFT_LD_PIN #undef BTN_EN1 #undef BTN_EN2 #undef BTN_ENC diff --git a/Marlin/src/pins/samd/pins_RAMPS_144.h b/Marlin/src/pins/samd/pins_RAMPS_144.h index d72b55d3af..7a72ef651f 100644 --- a/Marlin/src/pins/samd/pins_RAMPS_144.h +++ b/Marlin/src/pins/samd/pins_RAMPS_144.h @@ -363,10 +363,10 @@ #if !IS_NEWPANEL // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 + //#define SHIFT_CLK_PIN 38 + //#define SHIFT_LD_PIN 42 + //#define SHIFT_OUT_PIN 40 + //#define SHIFT_EN_PIN 17 #endif #endif @@ -567,9 +567,9 @@ // Buttons are directly attached to AUX-2 #if IS_RRW_KEYPAD // TO TEST - //#define SHIFT_OUT 40 - //#define SHIFT_CLK 44 - //#define SHIFT_LD 42 + //#define SHIFT_OUT_PIN 40 + //#define SHIFT_CLK_PIN 44 + //#define SHIFT_LD_PIN 42 //#define BTN_EN1 56 // Mega/Due:64 - AGCM4:56 //#define BTN_EN2 72 // Mega/Due:59 - AGCM4:72 //#define BTN_ENC 55 // Mega/Due:63 - AGCM4:55 diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D.h b/Marlin/src/pins/stm32f1/pins_CHITU3D.h index b18c9dd914..bb6f571924 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D.h @@ -146,10 +146,10 @@ #define BEEPER_PIN PC1 // 33 // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK PC6 // 38 - //#define SHIFT_LD PC10 // 42 - //#define SHIFT_OUT PC8 // 40 - //#define SHIFT_EN PA1 // 17 + //#define SHIFT_CLK_PIN PC6 // 38 + //#define SHIFT_LD_PIN PC10 // 42 + //#define SHIFT_OUT_PIN PC8 // 40 + //#define SHIFT_EN_PIN PA1 // 17 #endif #endif @@ -260,9 +260,9 @@ #define BTN_EN1 PE0 // 64 #define BTN_EN2 PD11 // 59 #define BTN_ENC PD15 // 63 - #define SHIFT_OUT PC8 // 40 - #define SHIFT_CLK PC12 // 44 - #define SHIFT_LD PC10 // 42 + #define SHIFT_OUT_PIN PC8 // 40 + #define SHIFT_CLK_PIN PC12 // 44 + #define SHIFT_LD_PIN PC10 // 42 #elif ENABLED(PANEL_ONE) #define BTN_EN1 PD11 // 59 // AUX2 PIN 3 #define BTN_EN2 PD15 // 63 // AUX2 PIN 4 diff --git a/Marlin/src/pins/teensy3/pins_TEENSY35_36.h b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h index b8a0ffe2c8..71c348536a 100644 --- a/Marlin/src/pins/teensy3/pins_TEENSY35_36.h +++ b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h @@ -146,7 +146,7 @@ #endif #if IS_RRW_KEYPAD - #define SHIFT_OUT 40 - #define SHIFT_CLK 44 - #define SHIFT_LD 42 + #define SHIFT_OUT_PIN 40 + #define SHIFT_CLK_PIN 44 + #define SHIFT_LD_PIN 42 #endif